A review of morphing aircraft

Journal of Intelligent Material Systems and Structures

Volumn 22, Issue 9, 2011, Pages 823-877

  Barbarino, Silvestro ^a   Bilgen, Onur ^a   Ajaj, Rafic M ^a   Friswell, Michael I ^a   Inman, Daniel J ^b  

^a SWANSEA UNIVERSITY   (United Kingdom)

^b VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

bio inspired; morphing < piezoelectric; review.; shape change

Indexed keywords

ACTIVE SYSTEMS; ACTUATION SYSTEMS; BIO-INSPIRED; CURRENT TRENDS; DESIGN SOLUTIONS; ENABLING TECHNOLOGIES; END USERS; EXPLOSIVE GROWTH; FLIGHT CONDITIONS; GEOMETRICAL CHANGES; GEOMETRICAL PARAMETERS; INTEGRATED APPROACH; ISSUES AND CHALLENGES; MORPHING; MORPHING AIRCRAFTS; MULTI-DISCIPLINARY; NEXT-GENERATION AIRCRAFT; OUT-OF-PLANE; PLANFORM; PRELIMINARY DESIGN; SATELLITE SERVICES; SHAPE CHANGE; SHAPE MORPHING; SYSTEM LEVELS; TECHNOLOGY READINESS LEVELS; TUNNEL TESTING; WEIGHT PENALTY; WING MORPHING; WING SURFACE;

AIRFOILS; BLENDING; DESIGN; FIXED WINGS; GEOMETRY; PLANFORMS;

AIRCRAFT;

EID: 80052367560     PISSN: 1045389X     EISSN: 15308138     Source Type: Journal    
DOI: 10.1177/1045389X11414084     Document Type: Review

References (342)

1. Abdullah, E.J., Bill, C. and Watkins, S. 2009. "Application of Smart Materials for Adaptive Airfoil Control," In: Proceedings of 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 5-8 January, Orlando, FL, AIAA 2009-1359 (11 pp).
2. Abdulrahim, M. and Lind, R. 2004. "Flight Testing and Response Characteristics of a Variable Gull-Wing Morphing Aircraft," In: Proceedings of AIAA Guidance, Navigation, and Control Conference and Exhibit, 16-19 August, Providence, RI, AIAA, 2004-5113, pp. 1664-1679.
3. Abdulrahim, M. and Lind, R. 2006. "Using Avian Morphology to Enhance Aircraft Maneuverability," In: Proceedings of AIAA Atmospheric Flight Mechanics Conference and Exhibit, 21-24 August, Keystone, CO, AIAA 2006-6643.
4. AeroVisions Inc. 2011. Available at: http://www.canosoarus.com/05UMAAV/ UMAAV01.htm (accessed date May 22, 2011 ).
5. AFRL Vehicle Research Section, Air Launched Integrated Countermeasure, Expendable (ALICE). 2011. Available at http://www.nrl.navy.mil/vrs/factsheets/ index.php (accessed date May 22, 2011 ).
6. Ajaj, R.M., Friswell, M.I., Dettmer, W.G., Allegri, G. and Isikveren, A.T. 2011 a. "Conceptual Modelling on Adaptive Torsion Wing Structure," 19th AIAA/ASME/AHS Adaptive Structures Conference, Denver, Colorado, AIAA 2011-1883 (15 pp).
7. Ajaj, R.M., Friswell, M.I., Smith D.D. and Isikveren, A.T. 2011 b. "Roll Control of a UAV Using an Adaptive Torsion Structure" 7th AIAA Multidisciplinary Design Optimization Specialist Conference, Denver, Colorado, AIAA 2011-1884 ( 15 pp).
8. Alasty, A., Alemohammad, S.H., Khiabani, R.H. and Khalighi, Y. 2004. "Maneuverability Improvement for an Ultra Light Airplane Model Using Variable Shape Wing," In: Proceedings of AIAA Atmospheric Flight Mechanics Conference and Exhibit, 16-19 August, Providence, RI, AIAA 2004-4831 (10 pp).
9. Albertani, R., Hubner, J.P., Ifju, P.G., Lind, R. and Jackowski, J. 2004. "Experimental Aerodynamics of Micro Air Vehicles," In: SAE World Aviation Congress and Exhibition, 3 November, Reno, NVPaper 04AER-8.
10. Alemayehu, D., Leng, M., McNulty, R., Mulloy, M., Somero, R. and Tenorio, C., 2004. Virginia Tech Morphing Wing Team Fall 2004 Final Report. Aerospace and Mechanical Engineering Departments, Virginia Tech, Blacksburg, VA. Available at: http://www.aoe.vt.edu/∼mason/Mason-f/MorphF04Rpt.pdf (accessed date May 22, 2011 ).
11. Alemayehu, D., Leng, M., McNulty, R., Mulloy, M., Somero, R. and Tenorio, C., 2005. Virginia Tech Morphing Wing Team Spring 2005 Final Report. Aerospace and Mechanical Engineering Departments, Virginia Tech, Blacksburg, VA. Available at: http://www.aoe.vt.edu/∼mason/Mason-f/MorphS05Rpt.pdf (accessed date May 22, 2011 ).
12. Amprikidis, M. and Cooper, J.E. 2003. "Development of Smart Spars for Active Aeroelastic Structures," In: Proceedings of 44th AIAA/ ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, 7-10 April, Norfolk, VA, AIAA 2003-1799.
13. Amprikidis, M., Cooper, J.E. and Sensburg, O. 2004. "Development of An Adaptive Stiffness All-Moving Vertical Tail," In: Proceedings of 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 19-22 April, Palm Spring, CA, AIAA 2004-1883 (13 pp).
14. Anderson, J.D. 2000. Introduction to Flight, 4 edn, McGraw Hill Book Company, New York.
15. Andersen, G.R., Cowan, D.L. and Piatak, D.J. 2007. "Aeroelastic Modeling, Analysis and Testing of a Morphing Wing Structure," In: 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April, Honolulu, HI, AIAA 2007-1734 (15 pp).
16. Arrison, L., Birocco, K., Gaylord, C., Herndon, B., Manion, K. and Metheny, M. 2003. "2002-2003 AE/ME Morphing Wing Design," Spring Semester Final Report, Virginia Tech Aerospace Engineering Senior Design Project.
17. Austin, F., Siclari, M.J., Van Nostrand, W., Weisensel, G.N., Kottamasu, V. and Volpe, G. 1997. "Comparison of Smart Wing Concepts for Transonic Cruise Drag Reduction," In Proceedings of SPIE 1997 Smart Structures and Materials 1997: Industrial and Commercial Applications of Smart Structures Technologies, 4 March San Diego, CA, 3044:33-40.
18. Bae, J.-S., Seigler, T.M. and Inman, D.J. 2005. "Aerodynamic and Static Aeroelastic Characteristics of a Variable-Span Morphing Wing, " Journal of Aircraft, 42: 528-534. (Pubitemid 40611752)
19. Bailly, J. and Delrieux, Y. 2009. "Improvement of Noise Reduction and Performance for a Helicopter Model Rotor Blade by Active Twist Actuation," In: Proceedings of 35th European Rotorcraft Forum, 22-25 September, Hamburg, Germany, Article 1157.
20. Baker, D. and Friswell, M.I. 2006. "Design of a Compliant Aerofoil using Topology Optimisation, " In: Proceedings of International Workshop on Smart Materials and Structures (Cansmart 2006), 12-13 October, Toronto, Canada (9 pp).
21. Baker, D. and Friswell, M.I. 2009. "Determinate Structures for Wing Camber Control," Smart Materials and Structures, 18: 035014.
22. Baker, D., Friswell, M.I. and Lieven, N.A.J. 2005. "Active Truss Structures for Wing Morphing," In: Proceedings of II ECCOMAS Thematic Conference on Smart Structures and Materials, 18-21 July, Lisbon, Portugal (11 pp).
23. Barbarino, S., Ameduri, S., Lecce, L. and Concilio, A. 2009 a. "Wing Shape Control through an SMA-Based Device, " Journal of Intelligent Material Systems and Structures, 20: 283-296.
24. Barbarino, S., Ameduri, S. and Pecora, R. 2007. "Wing Chamber Control Architectures based on SMA: Numerical Investigations," In: Du, S., Leng, J. and Asundi, A.K. (eds), Proceedings of SPIE International Conference on Smart Materials and Nanotechnology in Engineering (SMN2007), 1-4 July, Harbin, China, Vol. 6423, p. 64231E.
25. Barbarino, S., Concilio, A., Pecora, R., Ameduri, S. and Lecce, L. 2008. "Design of an Actuation Architecture based on SMA Technology for Wing Shape Control," In: Proceedings of Actuator 2008 Conference, 9-11 June, Bremen, Germany, p. 144.
26. Barbarino, S., Dettmer, W.G. and Friswell, M.I. 2010 a. "Morphing Trailing Edges with Shape Memory Alloy Rods," In: Proceedings of 21st International Conference on Adaptive Structures and Technologies (ICAST), 4-6 October, State College, PA (17 pp).
27. Barbarino, S., Gandhi, F. and Webster, S.D. 2010 b. "Design of Extendable Chord Sections for Morphing Helicopter Rotor Blades," In: Proceedings of ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2010), 28 September-1 October, Philadelphia, PASMASIS 2010-3668 (14 pp).
28. Barbarino, S., Pecora, R., Lecce, L., Concilio, A., Ameduri, S. and Calvi, E. 2009 b. "A Novel SMA-Based Concept for Airfoil Structural Morphing, " Journal of Materials Engineering and Performance, 18: 696-705.
29. Barrett, R.M. 1990. "Intelligent Rotor Blade Actuation through Directionally Attached Piezoelectric Crystals," In: Proceedings of 46th American Helicopter Society National Conference and Forum, 21-23 May, Washington, DC.
30. Barrett, R.M. 1992 a. "Actuation Strain Decoupling trough Enhanced Directional Attachment in Plates and Aerodynamic Surfaces," In: Proceedings of First European Conference on Smart Structures and Material, 12-14 May, Glasgow, Scotland.
31. Barrett, R.M. 1992 b. "High Bandwidth Electric Rotor Blade Actuator Study," Phase 1 SBIR Proposal, The US Army Aviation Systems Command, St. Louis, MO.
32. Barrett, R.M. 1996. "Active Aeroelastic Tailoring of an Adaptive Flexspar Stabilator, " Smart Materials and Structures, 5: 723-730.
33. Barrett, R.M. 2002. "Convertible Vertical Take-Off and Landing Miniature Aerial Vehicle," US Patent 6, 502, 787, 22.
34. Barrett, R.M. 2004. "Adaptive Aerostructures: The First Decade of Flight on Uninhabited Aerial Vehicles, In: Proceedings of SPIE, Smart Structures and Materials 2004: Industrial and Commercial Applications of Smart Structures Technologies, 3-6 March, San Diego, CA, Vol. 5388, pp. 190-201.
35. Barrett, R.M., Brozoski, F. and Gross, R.S. 1997. "Design and Testing of a Subsonic All-Moving Adaptive Flight Control Surface, " AIAA Journal, 35: 1217-1219. (Pubitemid 127543065)
36. Barrett, R.M., Burger, C. and Melian, J.P. 2001. "Recent Advances in Uninhabited Aerial Vehicle (UAV) Flight Control with Adaptive Aerostructures," In: Proceedings of 4th European Demonstrators Conference, Edinburgh, Scotland.
37. Barrett, R.M., Frye, P. and Schliesman, M. 1998. "Design, Construction and Characterization of a Flightworthy Piezoelectric Solid State Adaptive Rotor, " Journal of Smart Materials and Structures, 7: 422-431. (Pubitemid 128641310)
38. Barrett, R.M. and Howard, N. 2000. "Adaptive Aerostructures for Subscale Aircraft," In: Proceedings of 20th Southeastern Conference on Theoretical and Applied Mechanics, 16-18 April, Pine Mountain, GA.
39. Barrett, R.M. and Law, D. 1998. "Design, Fabrication and Testing of a New Twist-Active Wing Design," In: Regelbrugge, M.E. (ed.), Proceedings of SPIE Smart Structures and Integrated Systems, 27 July, San Diego, CA, Vol. 3329, pp. 33-41.
40. Barrett, R.M. and Lee, G. 2000. "Design Criteria, Aircraft Design, Fabrication and Testing of Sub-Canopy and Urban Micro-Aerial Vehicles," In: Proceedings of AIAA/AHS International Powered Lift Conference, November, Alexandria, VA.
41. Barrett, R.M. and Stutts, J.C. 1997. "Design and Testing of a 1/12th Scale Solid State Adaptive Rotor, " Journal of Smart Materials and Structures, 6: 491-497.
42. Barrett, R.M. and Stutts, J.C. 1998. "Development of a Piezoceramic Flight Control Surface Actuator for Highly Compressed Munitions," In: Proceedings of 39th Structures, Structural Dynamics and Materials Conference, 20-23 April, Long Beach, CA, AIAA 98-2034, pp. 2807-2813.
43. Barrett, R.M. and Tiso, P. 2004. "PBP Adaptive Actuators and Embodiments," International Patent Filing from the Faculty of Aerospace Engineering, Technical University of Delft, Netherland.
44. Barrett, R.M., Vos, R., Tiso, P. and De Breuker, R. 2005. "Post-Buckled Precompressed (PBP) Actuators: Enhancing VTOL Autonomous High Speed MAVs," In: Proceedings of 46th AIAA/ASME/ASCE/AHS/ASC Structure, Structural Dynamics & Materials Conference, 18-21 April, Austin, TX, AIAA 2005-2113 (13 pp).
45. Bartley-Cho, J.D., Wang, D.P., Martin, C.A., Kudva, J.N. and West, M.N. 2004. "Development of High-Rate, Adaptive Trailing Edge Control Surface for the Smart Wing Phase 2 Wind Tunnel Model, " Journal of Intelligent Material Systems and Structures, 15: 279-291.
46. Beauchamp, C.H. and Nedderman Jr., W.H. 2001. Patent: Controllable Camber Windmill Blades. Office of Naval Research.
47. Benavides, J.C. and Correa, G. 2004. Morphing Wing Design Using Nitinol Wire. University of Missouri-Rolla (UMR), Intelligent System Center, Rolla, MO. Available at: http://isc.mst.edu/reu/2004indprojects/2004-6.html (accessed date May 22, 2011 ).
48. Bernhard, A.P.F. and Chopra, I. 2001. "Analysis of a Bending-Torsion Coupled Actuator for a Smart Rotor with Active Blade Tips, " Smart Materials and Structures, 10: 35-52. (Pubitemid 32253488)
49. Bharti, S., Frecker, M.I., Lesieutre, G. and Browne, J. 2007. "Tendon Actuated cellular Mechanisms for Morphing Aircraft Wing," In: Proceedings of SPIE Modeling, Signal Processing, and Control for Smart Structures, 19 March, San Diego, CA, Vol. 6523, doi:10.1117/12.715855.
50. Bilgen, O., Butt, L.M., Day, S.R., Sossi, C.A., Weaver, J.P., Wolek, A., Mason, W.H. and Inman, D.J. 2011 b. "A Novel Unmanned Aircraft with Solid-State Control Surfaces: Analysis and Flight Demonstration," In: Proceedings of 52nd AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics, and Materials, 4-7 April, Denver, CO, AIAA 2011-2071 (24 pp).
51. Bilgen, O., Friswell, M.I., Kochersberger, K.B. and Inman, D.J. 2011 a. "Surface Actuated Variable-Camber and Variable-Twist Morphing Wings Using Piezocomposites," In: Proceedings of 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials, 4-7 April, Denver, CO, AIAA 2011-2072.
52. Bilgen, O., Kochersberger, K.B., Diggs, E.C., Kurdila, A.J. and Inman, D.J. 2007. "Morphing Wing Micro-Air-Vehicles Via Macro-Fiber-Composite Actuators," In: Proceedings of 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April, Honolulu, HI, AIAA 2007-1785 (17 pp).
53. Bilgen, O., Kochersberger, K.B. and Inman, D.J. 2009. "Macro-Fiber Composite Actuators for a Swept Wing Unmanned Aircraft," Aeronautical Journal, Special issue on Flight Structures Fundamental Research in the USA, 113: 385-395.
54. Bilgen, O., Kochersberger, K.B. and Inman, D.J. 2010 a. "Macro-Fiber Composite Actuated Simply-Supported Thin Morphing Airfoils," Smart Material and Structures, 19: 055010 ( 11 pp).
55. Bilgen, O., Kochersberger, K.B. and Inman, D.J. 2010 b. "Novel, BiDirectional, Variable Camber Airfoil via Macro-Fiber Composite Actuators, " AIAA Journal of Aircraft, 47: 303-314.
56. Blondeau, J. and Pines, D. 2007. "Design and Testing of a Pneumatic Telescopic wing for Unmanned Aerial Vehicles, " Journal of Aircraft, 44: 1088-1099. (Pubitemid 47345324)
57. Blondeau, J., Richeson, J. and Pines, D.J. 2003. "Design, Development and Testing of a Morphing Aspect Ratio Wing Using an Inflatable Telescopic Spar," In: Proceedings of 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 7-10 April, Norfolk, VA, AIAA 2003-1718.
58. Boeing, Aerospace Company. 1973. "Variable Camber Wing, Second Progress Report."
59. Bolonkin, A. and Gilyard, G.B. 1999. "Estimated Benefits of Variable-Geometry Wing Camber Control for Transport Aircraft," Technical Memorandum, NASA Dryden Flight Research Center, Edwards, CA, NASA /TM- 1999-206586.
60. Bonnema, K.L. and Smith, S.B. 1988. "AFTI/F-111 Mission Adaptive Wing Flight Research Program," In: Proceedings of 4th AIAA Flight Test Conference, 18-20 May, San Diego, CA, pp. 155-161.
61. Boothe, K. 2004. "Dynamic Modeling and Flight Control of Morphing Air Vehicles," Master's Thesis, University of Florida, FL.
62. Boria, F., Stanford, B., Bowman, S. and Ifju, P. 2009. "Evolutionary Optimization of a Morphing Wing with Wind-Tunnel Hardware in the Loop, " AIAA Journal, 47: 399-409.
63. Bornengo, D., Scarpa, F. and Remillat, C. 2005. "Evaluation of Hexagonal Chiral Structure for Morphing Airfoil Concept," Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 219: 185-192. (Pubitemid 41252577)
64. Bourdin, P., Gatto, A. and Friswell, M.I. 2007. "Potential of Articulated Split Wingtips for Morphing-Based Control of Flying Wing," In: Proceedings of 25th AIAA Applied Aerodynamics Conference, 25-28 June, Miami, Florida, AIAA 2007-4443 (16 pp).
65. Bourdin, P., Gatto, A. and Friswell, M.I. 2008. "Aircraft Control via Variable Cant-Angle Winglets, " Journal of Aircraft, 45: 414-423. (Pubitemid 351607218)
66. Bourdin, P., Gatto, A. and Friswell, M.I. 2010. "Performing Co-ordinated Turns with Articulated Wing Tips as a Multi-axis Control Effectors, " Aeronautical Journal, 114: 35-47.
67. Bovais, C.S. and Davidson, P.T. 1994. "Flight Testing the Flying Radar Target (FLYRT)," In: Proceedings of 7th Biennial Flight Test Conference, 20-23 June, Colorado Springs, CO, AIAA 94-2144, pp. 279-286.
68. Bowman, J., Sanders, B., Cannon, B., Kudva, J., Joshi, S. and Weisshaar, T. 2007. "Development of Next Generation Morphing Aircraft Structures," In: Proceedings of 48th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April, Honolulu, HI, AIAA 2007-1730 (10 pp).
69. Bowman, J., Sanders, B. and Weisshaar, T. 2002. "Evaluating the Impact of Morphing Technologies on Aircraft Performance," In: Proceedings of 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 22-25 April, Denver, CO, AIAA 2002-1631 (11 pp).
70. Boyd J. r. and Douglas, D. 2009. "Aerodynamic and Acoustic Study of an Active Twist Rotor using a Loosely Coupled CFD/CSD Method," In: Proceedings of 35th European Rotorcraft Forum, 22-25 September, Hamburg, GermanyArticle 1160.
71. Brailovski, V., Terriault, P., Coutu, D., Georges, T., Morellon, E., Fischer, C. and Berubé S. 2008. "Morphing Laminar Wing with Flexible Extrados Powered by Shape Memory Alloy Actuators," In: Proceedings of International Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2008), 28-30 October, Ellicott City, MDPaper SMASIS 2008-377 ( 9 pp).
72. Brender, S., Mark, H. and Aguilera, F. 1997. "The Attributes of a Variable-Diameter Rotor System Applied to Civil Tiltrotor Aircraft," NASA Contractor Report, Ames Research Center, NASA-CR- 203092.
73. Bubert, E.A., Woods, B.K.S., Lee, K., Kothera, C.S. and Wereley, N.M. 2010. "Design and Fabrication of a Passive 1D Morphing Aircraft Skin, " Journal of Intelligent Material Systems and Structures, 21: 1699-1717.
74. Bushnell, G.S., Arbogast, D.J. and Ruggeri, R.T. 2008. "Shape Control of a Morphing Structure (Rotor Blade) Using a Shape Memory Alloy Actuator System, Future of SMA," In: Proceedings of SPIE Active and Passive Smart Structures and Integrated Systems 2008, 9-13 March, San Diego, CA, Vol. 6928, pp. 69282A-69282A-11.
75. Butt, L., Bilgen, O., Day, S., Sossi, C., Weaver, J., Wolek, A., Inman, D.J. and Mason, W.H. 2010 b. "Wing Morphing Design Utilizing Macro Fiber Composite," In: Proceedings of Society of Allied Weight Engineers (SAWE) 69th Annual Conference, May, Virginia Beach, VA Paper Number 3515-S.
76. Butt, L., Day, S., Sossi, C., Weaver, J., Wolek, A., Bilgen, O., Inman, D.J. and Mason, W.H. 2010 a. "Wing Morphing Design Team Final Report 2010," Virginia Tech Departments of Mechanical Engineering and Aerospace and Ocean Engineering Senior Design Project, Blacksburg, VA.
77. Bye, D.R. and McClure, P.D. 2007. "Design of a Morphing Vehicle," In: Proceedings of 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April, Honolulu, HI, AIAA 2007-1728 (16 pp).
78. Caldwell, N., Gutmark, E. and Ruggeri, R. 2007. "Performance Predictions of a Blade Twist Actuator System," In: Proceedings of 45th AIAA, Aerospace Sciences Meeting and Exhibit (2007), 8-11 January, Reno, NV, AIAA 2007-1216 (10 pp).
79. Calkins, F.T., Mabe, J.H. and Ruggeri, R.T. 2008. "Overview of Boeing's Shape Memory Alloy Based Morphing Aerostructures," In: Proceedings of ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2008), 28-30 October, Ellicott City, MD, Paper SMASIS2008-648.
80. Campanile, L.F. 2008. "Modal Synthesis of Flexible Mechanisms for Airfoil Shape Control, " Journal of Intelligent Material Systems and Structures, 19: 779-789.
81. Campanile, L.F. and Sachau, D. 2000. "The Belt-Rib Concept: A Structronic Approach to Variable Camber, " Journal of Intelligent Material Systems and Structures, 11: 215-224. (Pubitemid 32188384)
82. Cesnik, C.E.S. and Brown, E.L. 2003. "Active Warping Control of a Joined-Wing Airplane Configuration," In: Proceedings of 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, 7-10 April, Norfolk, VA, AIAA 2003-1715 (15 pp).
83. Cesnik, C.E.S. and Shin, S.J. 2001. "On the Twist Performance of a Multiple-Cell Active Helicopter Blade, " Smart Materials and Structures, 10: 53-61. (Pubitemid 32253489)
84. Cesnik, C.E.S., Shin, S.J. and Wilbur, M.L. 2001. "Dynamic Response of Active Twist Rotor Blades, " Smart Materials and Structures, 10: 62-76. (Pubitemid 32253490)
85. Chandra, R. 2001. "Active Shape Control of Composite Blades using Shape Memory Actuation, " Smart Materials and Structures, 10: 1018-1024. (Pubitemid 33039018)
86. Chen, P.C., Sarhaddi, D., Jha, R., Liu, D.D., Griffin, K. and Yurkovich, R. 2000. "Variable Stiffness Spar Approach for Aircraft Maneuver Enhancement Using Astros, " Journal of Aircraft, 37: 865-871.
87. Chopra, I. 2001. "Recent Progress on Development of a Smart Rotor System," Presentation, NASA Langley Research Center, Langley, VA.
88. Chopra, I. 2002. "Review of State of Art of Smart Structures and Integrated Systems, " AIAA Journal, 40: 2145-2187. (Pubitemid 35361038)
89. Chou, A. and Philen, M. 2008. "High-Performance Flexible Matrix Composite Actuators for Trailing Edge Flap Control," In: Proceedings of Virginia Space Grant Consortium 2008 Student Research Conference, 21 April, Norfolk, VA (8 pp).
90. Clarke, R., Allen, M.J., Dibley, R.P., Gera, J. and Hodgkinson, J. 2005. "Flight Test of the F/A-18 Active Aeroelastic Wing Airplane," In: Proceedings of AIAA Atmospheric Flight Mechanics Conference and Exhibit, 15-18 August, San Francisco, CA, AIAA 2005-6316 (31 pp).
91. Cooper, J.E. 2006. "Adaptive Stiffness Structures for Air Vehicle Drag Reduction," In: Multifunctional Structures/Integration of Sensors and Antennas, Meeting Proceedings RTO-MP-AVT-141, Neuilly-sur-Seine, France, pp. 15.1-15.12.
92. Cooper, J.E., Amprikidis, M., Ameduri, S., Concilio, A., San Milan, J. and Castanon, M. 2005. "Adaptive Stiffness Systems for an Active All-Moving Vertical Tail," In: Proceedings of European Conference for Aerospace Sciences (EUCASS), 4-7 July, Moscow, Russia (7 pp).
93. Crawley, E.F., Lazarus, K.B. and Warkentin, D.J. 1989. "Embedded Actuation and Processing in Intelligent Materials," In: Proceedings of 2nd International Workshop on Composite Materials and Structures, 14-15 September, Troy, NY.
94. Cuji, E. and Garcia, E. 2008. "Aircraft Dynamics for Symmetric and Asymmetric V-Shape Morphing Wings," In: ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS08), 28-30 October, Ellicott City, MDSMASIS 2008-424.
95. DARPA Tactical Technology Office (TTO). 2011. Available at: http://www.darpa.mil/Our-Work/TTO/Programs/DiscRotor/DiscRotor-Compound- Helicopter.aspx (accessed date May 22, 2011 ).
96. Davis, S.J., Moffitt, R., Quackenbush, T.R. and Wachspress, D.A. 1995. "Aerodynamic Design Optimization of a Variable Diameter Tilt Rotor," In: Proceedings of American Helicopter Society 51st Annual Forum, 9-11 May 1995, Fort Worth, TX, pp. 101-111.
97. Daynes, S., Nall, S.J., Weaver, P.M., Potter, K.D., Margaris, P. and Mellor, P.H. 2009. "On a Bistable Flap for an Airfoil," In: Proceedings of 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4-7 May, Palm Springs, CA, AIAA 2009-2103.
98. de Camp, R.W. and Hardy, R. 1984. "Mission Adaptive Wing Advanced Research Concepts," AIAA 1984-2088.
99. Derham, R.C. and Hagood, N.W. 1996. "Rotor Design Using Smart Materials to Actively Twist Blades," In: Proceedings of American Helicopter Society 52nd Annual Forum, June, Washington, DC, Vol. 2, pp. 1242-1252.
100. Detrick, M. and Washington, G. 2007. "Modeling and Design of a Morphing Wing for Micro Unmanned Aerial Vehicles via Active Twist," In: Proceedings of 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference, 23-26 April, Honolulu, HI, AIAA 2007-1788 (7 pp).
101. Diaconu, C.G., Weaver, P.M. and Mattioni, F. 2008. "Concepts for Morphing Airfoil Sections Using Bi-Stable Laminated Composite Structures, " Thin-Walled Structures, 46: 689-701.
102. Edi, P. and Fielding, J.P. 2006. "Civil-Transport Wing Design Concept Exploiting New Technologies, " Journal of Aircraft, 43: 932-940. (Pubitemid 44299655)
103. Eggleston, G., Hutchison, C., Johnston, C., Koch, B., Wargo, G. and Williams, K. 2002. "Morphing Aircraft Design Team," Virginia Tech Aerospace Engineering Senior Design Project.
104. Ehlers, S.M. and Weisshaar, T.A. 1990. "Static Aeroelastic Behavior of an Adaptive Laminated Piezoelectric Composite Wing, " AIAA Journal, 28: 1611-1623. (Pubitemid 20705390)
105. Ehlers, S.M. and Weisshaar, T.A. 1992. "Adaptive Wing Flexural Axis Control," In: Proceedings of Third International Conference on Adaptive Structures, 9-11 November, San Diego, CA.
106. Elzey, D.M., Sofla, A.Y.N. and Wadley, H.N.G. 2003. "A Bio-Inspired, High-Authority Actuator for Shape Morphing Structures," In: Logoudas, D.C. (ed.), Proceedings of SPIE, Smart Structures and Materials 2003: Active Materials: Behavior and Mechanics, 13 August, San Diego, CA, Vol. 5053, pp. 92-100.
107. Epps, J.J. and Chopra, I. 2001. "In-Flight Tracking of Helicopter Rotor Blades Using Shape Memory Alloy Actuators, " Smart Materials and Structures, 10: 104-111. (Pubitemid 32253494)
108. Flanagan, J.S., Strutzenberg, R.C., Myers, R.B. and Rodrian, J.E. 2007. "Development and Flight Testing of a Morphing Aircraft, the NextGen MFX-1," In: Proceedings of 48th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials, 23-26 April, Honolulu, HI, AIAA 2007-1707.
109. FlexSys Inc. 2011. Available at: http://www.flxsys.com/index.shtml (accessed date May 22, 2011 ).
110. Florance, J.P., Burner, A.W., Fleming, G.A., Hunter, C.A. and Graves, S.S. 2003. "Contributions of the NASA Langley Research Center to the DARPA/AFRL/NASA/Northrop Grumman Smart Wing Program," In: Proceedings of 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, 7-10 April, Norfolk, VA, AIAA 2003-1961.
111. Florance, J.R., Heeg, J., Spain, C.V. and Lively, P.S. 2004. "Variable Stiffness Spar Wind-Tunnel Modal Development and Testing," In: Proceedings of 45th AIAA/ASME/ASCE/ AHS/ASC/ Structures, Structural Dynamics and Materials Conference, 19-22 April, Palm Springs, CA, AIAA 2004-1588 (11 pp).
112. Fradenburgh, E. 1973. "Dynamic Model Wind Tunnel Tests of a Variable-Diameter, Telescoping-Blade Rotor System (TRAC Rotor)," USAAMRDL Technical Report 73-32, Eustis Directorate, US Army Air Mobility R&D Laboratory, Fort Eustis, VA.
113. Fradenburgh, E. and Matuska, D. 1992. "Advancing Tiltrotor State-of-the-Art with Variable Diameter Rotors," In: Proceedings of American Helicopter Society 48th Annual Forum, 3-5 June, Washington, DC.
114. Frank, G.J., Joo, J.J., Sanders, B., Garner, D.M. and Murray, A.P. 2008. "Mechanization of a High Aspect Ratio Wing for Aerodynamic Control, " Journal of Intelligent Material Systems and Structures, 19: 1102-1112.
115. Frint, H., 1977. "Design Selection Tests for TRAC Retraction Mechanism," USAAMRDL Technical Report 76-43, Eustis Directorate, US Army Air Mobility R&D Laboratory, Fort Eustis, VA.
116. Gamboa, P., Aleixo, P., Vale, J., Lau, F. and Suleman, A. 2007. "Design and Testing of a Morphing Wing for an Experimental UAV," RTO-MP-AVT-146, Neuilly-sur-Seine, France.
117. Gamboa, P., Vale, J., Lau, F.J.P. and Suleman, A. 2009. "Optimization of a Morphing Wing Based on Coupled Aerodynamic and Structural Constraints, " AIAA Journal, 47: 2087-2104.
118. Gandhi, F. and Anusonti-Inthra, P. 2008. "Skin Design Studies for Variable Camber Morphing Airfoils," Smart Materials and Structures, 17: 015025.
119. Gandhi, F., Frecker, M. and Nissly, A. 2008. "Design Optimization of a Controllable Camber Rotor Airfoil, " AIAA Journal, 46: 142-153. (Pubitemid 351158409)
120. Gano, S.E., Perez, V.M., Renaud, J.E., Batill, S.M. and Sanders, B. 2004. "Multilevel Variable Fidelity Optimization of a Morphing Unmanned Aerial Vehicle," In: Proceedings of 45th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 19-22 April, Palm Springs, CA, AIAA 2004-1763 (16 pp).
121. Gano, S.E. and Renaud, J.E. 2002. "Optimized Unmanned Aerial Vehicle with Wing Morphing for Extended Range and Endurance," In: Proceedings of 9th AIAA/ISSMO Symposium and Exhibit on Multidisciplinary Analysis and Optimization, 4-6 September, Atlanta, GA, AIAA 2002-5668 (9 pp).
122. Garcia, H.M., Abdulrahim, M. and Lind, R. 2003. "Roll Control for a Micro Air Vehicle Using Active Wing Morphing," In: Proceedings of AIAA Guidance, Navigation, and Control Conference Exhibit, 11-14 August, Austin, TX, AIAA J. 2003-5347 (10 pp).
123. Garcia, H.M., Abdulrahim, M. and Lind, R. 2005. "Flight Characteristics of Shaping the Membrane Wing of a Micro Air Vehicle, " Journal of Aircraft, 42: 131-137. (Pubitemid 40246054)
124. Gatto, A., Bourdin, P. and Friswell, M.I. 2010. "Experimental Investigation into Articulated Winglet Effects on Flying Wing Surface Pressure Aerodynamics, " Journal of Aircraft, 47: 1811-1815.
125. Geissler, W., Sobieczky, H. and Trenker, M. 2000. "New Rotor Airfoil Design Procedure for Unsteady Flow Control," In: Proceedings of 26th European Rotorcraft Forum, 2-4 May, The Hague, HollandPaper No. 31.
126. Gern, F.H., Inman, D.J. and Kapania, R.K. 2005. "Computation of Actuation Power Requirements for Smart Wings with Morphing Airfoils, " AIAA Journal, 43: 2481-2486. (Pubitemid 43017391)
127. Gevers Aircraft Inc. 1997. "Multi-Purpose Aircraft," United States Patents Office, Patent Number 5, 645, 250.
128. Giurgiutiu, V. 2000. "Review of Smart-Materials Actuation Solutions for Aeroelastic and Vibration Control, " Journal of Intelligent Material Systems and Structures, 11: 525-544. (Pubitemid 32426545)
129. Giurgiutiu, V., Chaudhry, Z. and Rogers, C.A. 1994 a. "Active Control of Helicopter Rotor Blades with Induced Strain Actuators," In: Proceedings of 35th AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics, and Materials Conference, 18-20 April, Hilton Head, SC (10 pp).
130. Giurgiutiu, V., Chaudhry, Z. and Rogers, C.A. 1994 b. "Engineering Feasibility of Induced-Strain Actuators for Rotor Blade Active Vibration Control, In: Proceedings of SPIE Smart Structures and Materials '94 Conference, 13-18 February, Orlando, FL, Vol. 2190, Paper # 2190-11, pp. 107-122.
131. Grady, B. 2010. "Multi-Objective Optimization of a Three Cell Morphing Wing Substructure," Master's Thesis, University of Dayton, OH.
132. Grant, D., Abdulrahim, M. and Lind, R. 2006. "Flight Dynamics of a Morphing Aircraft Utilizing Independent Multiple-Joint Wing Sweep," In: Proceedings of AIAA Atmospheric Flight Mechanics Conference and Exhibit, 21-24 August, Keystone, CO, AIAA 2006-6505 (15 pp).
133. Griffin, K.E. and Hopkins, M.A. 1997. "Smart Stiffness for Improved Roll Control, " Journal of Aircraft, Engineering Notes, 34: 445-447.
134. Grohmann, B.A., Maucher, C.K. and Jänker, P. 2006. "Actuation Concepts for Morphing Helicopter Rotor Blades," In: Proceedings of 25th International Congress of the Aeronautical Sciences, 3-8 September, Hamburg, Germany (10 pp).
135. Grohmann, B.A., Maucher, C.K., Janker, P. and Wierach, P. 2008. "Embedded Piezoceramic Actuators for Smart Helicopter Rotor Blades," In: 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials, 7-10 April, Schaumburg, IL, AIAA 2008-1702 (10 pp).
136. Guiler, R. and Huebsch, W. 2005. "Wind Tunnel Analysis of a Morphing Swept Tailless Aircraft," In: Proceedings of 23rd AIAA Applied Aerodynamics Conference, 6-9 June, Toronto, Ontario, Canada, AIAA 2005-4981 (14 pp).
137. Hall, J., Mohseni, K. and Lawrence, D. 2005. "Investigation of Variable Wing-Sweep for Applications in Micro Air Vehicles," In: Proceedings of Infotech@Aerospace, 26-29 September, Arlington, VA, AIAA 2005-7171 (11 pp).
138. Han, C., Ruy, K. and Lee, S. 2007. "Experimental Study of a Telescopic Wing Inside Channel, " Engineering Notes, Journal of Aircraft, 44: 1029-1030. (Pubitemid 47110995)
139. Henry, J.J. and Pines, D.J. 2007. "A Mathematical Model for Roll Dynamics by Use of a Morphing-Span Wing," In: Proceedings of 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April, Honolulu, HI, AIAA 2007-1708 (16 pp).
140. Heryawan, Y., Park, H.C., Goo, N.S., Yoon, K.J. and Byun, Y.H. 2005. "Design and Demonstration of a Small Expandable Morphing Wing," In: Proceedings of SPIE 12th Annual International Symposium on Smart Structures and Materials, 6-10 March, San Diego, CA, 5764: 224-231.
141. Hu, H., Tamai, M. and Murphy, J. 2008. "Flexible Membrane Airfoils at Low Reynolds Numbers, " Journal of Aircraft, 45: 1767-1778.
142. Hunton, L.W. and Dew, J.K. 1947. "Measurements of the Damping in Roll of Large-Scale swept-Forward and Swept-Back Wings," Ames Aeronautical Laboratory, NACA RM-A7D11.
143. Icardi, U. and Ferrero, L. 2009. "Preliminary Study of an Adaptive Wing with Shape Memory Alloy Torsion Actuators, " Materials and Design, 30: 4200-4210.
144. Ifju, P.G., Ettinger, S., Jenkins, D.A. and Martinez, L. 2001. "Composite Materials for Micro Air Vehicles," In: Proceedings of SAMPE Annual Conference, 6-10 May, Long Beach, CA (12 pp).
145. Ifju, P.G., Jenkins, D.A., Ettinger, S., Lian, Y., Shyy, W. and Waszak, M.R. 2002. "Flexible-Wing-Based Micro Air Vehicles," In: Proceedings of AIAA Annual Conference, January, Reno, NV, AIAA 2002-0705 (13 pp).
146. Inman, D.J. 2001. "Wings: Out of the Box. Determining Actuator Requirements for Controlled Morphing Air Vehicles- Aerodinamic Loads," DARPA Technology Interchange Meeting, Wright Patterson Air Force Base, Dayton, OH.
147. Ivanco, T.G., Scott, R.C., Love, M.H., Zink, S. and Weisshaar, T.A. 2007. "Validation of the Lockheed Martin Morphing Concept with Wind Tunnel Testing," In: Proceedings of 48th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April, Honolulu, HI, AIAA 2007-2235 (17 pp).
148. Janker, P., Kloppel, V., Hermle, F., Lorkowski, T., Storm, S., Christmann, M. and Wettemann, M. 1999. "Development and Evaluation of a Hybrid Piezoelectric Actuator for Advanced Flap Control Technology," In: Proceedings of 25th European Rotorcraft Forum (ERF 1999), 14-16 September, Rome, Italy.
149. Jha, A.K. and Kudva, J.N. 2004. "Morphing Aircraft Concepts, Classifications, and Challenges," In: Anderson, E.H. (ed.), Proceedings of SPIE Smart Structures and Materials 2004: Industrial and Commercial Applications, 29 July, San Diego, CA, Vol. 5388, pp. 213-224.
150. Johnson, T., Frecker, M., Abdalla, M., Gurdal, Z. and Lindner, D. 2009. "Nonlinear Analysis and Optimization of Diamond Cell Morphing Wings, " Journal of Intelligent Material Systems and Structures, 20: 815-824.
151. Johnston, C.O., Mason, W.H., Han, C. and Inman, D.J. 2007. "Actuator-Work Concepts Applied to Unconventional Aerodynamic Control Devices, " Journal of Aircraft, 44: 1459-1468. (Pubitemid 350150113)
152. Johnston, C.O., Neal, D.A., Wiggins, L.D., Robertshaw, H.H., Mason, W.H. and Inman, D.J. 2003. "A Model to Compare the Flight Control Energy Requirements of Morphing and Conventionally Actuated Wings," In: Proceedings of 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, 7-10 April, Norfolk, VA, AIAA 2003-1716 (9 pp).
153. Jones, R.T. 1945. "Wing Plan Forms for High-Speed Flight," NACA Report 863.
154. Joo, J.J., Reich, G.W. and Westfall, J.T. 2009. "Flexible Skin Development for Morphing Aircraft Applications Via Topology Optimization, " Journal of Intelligent Material Systems and Structures, 20: 1969-1985.
155. Joo, J.J., Sanders, B., Johnson, T. and Frecker, M.I. 2006. "Optimal Actuator Location within a Morphing Wing Scissor Mechanism Configuration, In: Proceedings of SPIE Smart Structures and Materials 2006: Modeling, Signal Processing, and Control, 27 February-2 March, San Diego, CA, Vol. 6166 (12 pp).
156. Joshi, S.P., Tidwell, Z., Crossley, W.A. and Ramakrishnan, S. 2004. "Comparison of Morphing Wing Strategies Based Upon Aircraft Performance Impacts," In: Proceedings of 45th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, CA, AIAA 2004-1722 (7 pp).
157. Kerho, M. 2007. "Adaptive Airfoil Dynamic Stall Control, " Journal of Aircraft, 44: 1350-1360. (Pubitemid 47345350)
158. Khoshlahjeh, M., Bae, E.S. and Gandhi, F. 2010. "Helicopter Performance Improvement with Variable Chord Morphing Rotors," In: Proceedings of 36th European Rotorcraft Forum, 7-9 September, Paris, France (12 pp).
159. Khoshlahjeh, M., Gandhi, F. and Webster, S. 2011. "Extendable Chord Rotors for Helicopter Envelope Expansion and Performance Improvement," In: Proceedings of 67th American Helicopter Society (AHS) Annual Forum, 3-5 May, Virginia Beach, VA.
160. Kim, D.K. and Han, J.H. 2006. "Smart Flapping Wing using Macro-Fiber Composite Actuators," In: Matsuzaki, Y. (ed.), Proceedings of SPIE Smart Structures and Materials 2006: Smart Structures and Integrated Systems, San Diego, CA, Vol. 6173, pp. 133-141.
161. Kim, D.K., Han, J.H. and Kwon, K.J. 2009. "Wind Tunnel Tests for a Flapping Wing Model with a Changeable Camber using Macro-Fiber Composite Actuators," Smart Materials and Structures, 18: 024008.
162. Koratkar, N.A. and Chopra, I. 2000. "Development of a Mach-Scaled Model with Piezoelectric Bender Actuated Trailing-Edge Flaps for Helicopter Individual Blade Control (IBC), " AIAA Journal, 38: 1113-1124.
163. Koratkar, N.A. and Chopra, I. 2001. "Wind Tunnel Testing of a Mach-Scaled Rotor Model with Trailing-Edge Flaps, " Smart Materials and Structures, 10: 1-14. (Pubitemid 32253485)
164. Kota, S., Ervin, G., Osborn, R. and Ormiston, R.A. 2008. "Design and Fabrication of an Adaptive Leading Edge Rotor Blade," In: Proceedings of American Helicopter Society 64th Annual Forum, 29 April-1 May, Montreal, Canada (9 pp).
165. Kota, S., Osborn, R., Ervin, G., Maric, D., Flick, P. and Paul, D. ' 2009. "Mission Adaptive Compliant Wing - Design, Fabrication and Flight Test," In: RTO Applied Vehicle Technology Panel (AVT) Symposium, Evora, Portugal, RTO-MP-AVT-168.
166. Kovalovs, A., Barkanov, E. and Gluhihs, S. 2007. "Active Twist of Model Rotor Blades with D-Spar Design, " Transport, 22: 38-44. (Pubitemid 46521994)
167. Kress, R.W. 1983. "Variable Sweep Wing Design," In: Proceedings of Aircraft Prototype and Technology Demonstrator Symposium, 23-24 March, Dayton, OH, AIAA 1983-1051.
168. Kudva, J.N. 2001. "Overview of the DARPA/AFRL/NASA Smart Wing Phase II Program, " In: Proceedings of SPIE Smart Structures and Materials Conference, Vol. 4332, pp. 383-389. (Pubitemid 32833897)
169. Kudva, J.N. 2004. "Overview of the DARPA Smart Wing Project, " Journal of Intelligent Material Systems and Structures, 15: 261-267.
170. Kudva, J.N. and Carpenter, B. 2000. "Smart Wing Program," In: Proceedings of DARPA Technology Interchange Meeting, June.
171. Kudva, J.N., Jardine, P., Martin, C. and Appa, K. 1996 a. "Overview of the ARPA/WL "Smart Structures and Material Development - Smart Wing" Contract," In: Proceedings of SPIE North American Conference on Smart Structures and Materials, San Diego, CASPIE, 2721: 10-16.
172. Kudva, J.N., Lockyer, A.J. and Appa, K. 1996 b. "Adaptive Aircraft Wing," In: Proceedings of AGARD SMP Lecture series 205, Smart Structures and Materials: Implications for Military Aircraft of New Generation, 30-31 October, Philadelphia, PAAGARD -LS-205.
173. Kuzmina, S., Gennadi, A., Schweiger, J., Cooper, J., Amprikidis, M. and Sensberg, O. 2002. "Review and Outlook on Active and Passive Aeroelastic Design Concepts for Future Aircraft," In: Proceedings of International Congress of the Aeronautical Sciences (ICAS 2002), pp. 432.1-432.10.
174. Lajux, V. and Fielding, J. 2005. "Development of a Variable Camber Leading Edge Device Design Methodology," In: Proceedings of AIAA 5th ATIO and 16th Lighter-Than-Air Sys Tech. and Balloon Systems Conferences, 28 September, Arlington, VA, AIAA 2005-7356.
175. Lazarus, K.B., Crawley, E.F. and Bohlmann, J.D. 1991. "Static Aeroelastic Control Using Strain Actuated Adaptive Structures, " Journal of Intelligent Material Systems and Structures, 2: 386-410.
176. Lazos, B.S. and Visser, K.D. 2006. "Aerodynamic Comparison of Hyper-Elliptic Cambered Span (HECS) Wings with Conventional Configurations, " In: Proceedings of 24th AIAA Applied Aerodynamic Conference, 5-8 June, San Francisco, CA, AIAA 2006-3469 (18 pp).
177. Lee, G. 1997. "Design and Testing of the Kolibri Vertical Take-Off and Landing Micro Aerial Vehicle," Final Report for the Department of Defense CounterDrug Technology Office.
178. Lee, T. 1999. "Design of High Displacement Smart Trailing Edge Flap Actuator Incorporating Dual-Stage Mechanical Stroke Amplifiers for Rotors," Ph.D. Dissertation, Dept. of Aerospace Engineering, University of Maryland, College Park, December 1999.
179. Lee, T. and Chopra, I. 2001 a. "Design of Piezostack-Driven Trailing-Edge Flap Actuator for Helicopter Rotors, " Smart Materials and Structures, 10: 15-24. (Pubitemid 32253486)
180. Lee, T. and Chopra, I. 2001 b. "Wind Tunnel Test of Blade Sections with Piezoelectric Trailing-Edge Flap Mechanism," In: Proceedings of 57th Annual Forum of the American Helicopter Society, 9-11 May, Washington, DC, Vol. 2, pp. 1912-1923.
181. Leishman, G.J. 2006. Principles of Helicopter Aerodynamics, Cambridge Aerospace Series No. 12, Cambridge University Press, ISBN: 0521858607.
182. Leite, A., Vale, J., Lau, F. and Suleman, A. 2009. "Development of Morphing Strategies for Flight Demonstrator RPV," In: Proceedings of 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4-7 May, Palm Springs, CA, AIAA 2009-2134 (15 pp).
183. Leon, O. and Gandhi, F. 2009. "Rotor Power Reduction using Multiple Spanwise-Segmented Optimally-Actuated Trailing-Edge Flaps," In: Proceedings of 35th European Rotorcraft Forum, 22-25 September, Hamburg, Germany, Article 1309.
184. Leon, O., Hayden, E. and Gandhi, F. 2009. "Rotorcraft Operating Envelope Expansion Using Extendable Chord Sections," In: Proceedings of American Helicopter Society 65th Annual Forum, 27-29 May, Grapevine, TX (14 pp).
185. Lesieutre, G. and Davis, C. 1997. "Can a Coupling Coefficient of a Piezoelectric Device be Higher Than Those of Its Active Material ? " Journal of Intelligent Materials Systems and Structures, 8: 859-867. (Pubitemid 127607025)
186. Loftin, L. 1985. "Quest for Performance," NASA SP 468.
187. Love, M.H., Zink, P.S., Stroud, R.L., Bye, D.R., Rizk, S. and White, D. 2007. "Demonstration of Morphing Technology through Ground and Wind Tunnel Tests," In: Proceedings of 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April, Honolulu, HI, AIAA 2007-1729 (12 pp).
188. Lv, H., Leng, J. and Du, S. 2009. "A Survey of Adaptive Materials and Structures Research in China," In: Proceedings of 50th AIAA/ASME/ASCE/ASH/ACS Structures, Structural Dynamics, and Materials Conference, 4-7 May, Palm Springs, CA, AIAA 2009-2389 (8 pp).
189. Madden, J.D.W., Schmid, B., Hechinger, M., Lafontaine, S.R., Madden, P.G.A. and Hover, F.S. 2004. "Application of Polypyrrole Actuators: Feasibility of variable camber Foils, " IEEE Journal of Oceanic Engineering, 29: 738-749.
190. Majji, M., Rediniotis, O. and Junkins, J.L. 2007. "Design of a Morphing Wing: Modeling and Experiments," In: Proceedings of AIAA Atmospheric Flight Mechanics Conference and Exhibit, 20-23 August, Hilton Head, SC, AIAA 2007-6310 (9 pp).
191. Manzo, J. and Garcia, E. 2010. "Demonstration of an in situ Morphing Hyperelliptical Cambered Span Wing Mechanism," Smart Materials and Structures, 19: 025012.
192. Manzo, J., Garcia, E., Wickenheiser, A. and Horner, G.C. 2005. "Design of a Shape-Memory Alloy Actuated Macro-scale Morphing Aircraft Mechanism," In: Flatau, A.B. (ed.), Proceedings of SPIE Smart Structures and Materials 2005: Smart Structures and Integrated Systems, 17 May, San Diego, CA, Vol. 5764, p. 744.
193. Marmier, P. and Wereley, N.M. 2003. "Control of Sweep Using Pneumatic Actuators to Morph Wings of Small Scale UAVs," In: Proceedings of 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, 7-10 April, Norfolk, VA, AIAA 2003-1802 (10 pp).
194. Marques, M., Gamboa, P. and Andrade, E. 2009. "Design and Testing of a Variable Camber Flap for Improved Efficiency," In: Proceedings of RTO Applied Vehicle Technology Panel (AVT) Symposium, 20-24 April, Evora, Portugal (22 pp).
195. Martin, C.A., Bartley-Cho, J., Flanagan, J.S. and Carpenter, B.F. 1999. "Design and Fabrication of Smart Wing Wind Tunnel Model and SMA Control Surfaces," In: Jacobs, J.H. (ed.), Proceedings of SPIE Conference on Industrial and Commercial Applications of Smart Structures Technologies, Newport Beach, CA, Vol. 3674, pp. 237-248.
196. Martin, S. and Hall, G. 1969. "Rotor Will Retract in Flight to Improve V/STOL Cruise Performance," Space Aeronautics.
197. Martin, C.A., Hallam, B.J., Flanagan, J.S. and Bartley-Cho, J. 2002. "Design, Fabrication and Testing of Scaled Wind Tunnel Model for the Smart Wing Phase 2 Program," In: McGowan, A.R. (ed.), Proceedings of SPIE Smart Structures and Materials 2002: Industrial and Commercial Applications of Smart Structures Technologies, San Diego, CA, Vol. 4698, pp. 44-52.
198. Martin, C.A., Kudva, J., Austin, F., Jardine, A.P., Scherer, L.B., Lockyer, A.J. and Carpenter, B.F. 1998. "Smart Materials and Structures-Smart Wing Volumes I, II, III, and IV," Report: AFRL-ML-WP-TR-1999-4162, Northrop Grumman Corporation, Hawthorne, CA.
199. Martins, A.L. and Catalano, F.M. 1998. "Viscous Drag Optimization for a Transport Aircraft Mission Adaptive Wing," In: Proceedings of 21st ICAS Congress, 13-18 September, Melbourne, AustraliaPaper A98-31499.
200. Mattioni, F., Gatto, A., Weaver, P.M., Friswell, M.I. and Potter, K.D. 2006. "The Application of Residual Stress Tailoring of Snap-through Composites for Variable Sweep Wings," In: Proceedings of 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1-4 May, Newport, RI, AIAA 2006-1972.
201. McCormik, B.W. 1995. Aerodynamics, Aeronautics and Flight Mechanics, 2 edn, Wiley, New York.
202. McGowan, A.R. 2008. "Overview: Morphing Activities in the USA," In: Proceedings of Advanced Course on Morphing Aircraft Materials, Mechanisms and Systems, 17-20 November, Lisbon, Portugal.
203. McGowan, A.R., Horta, L.G., Harrison, J.S. and Raney, D.L. 1999. "Research Activities within NASA's Morphing Program," In: RTO Meeting Proceedings 36 (AC/323(AVT)TP/17) from the RTO AVT Specialists' Meeting on Structural Aspects of Flexible Aircraft Control, October, Ottawa, AL, Canada.
204. McKnight, G., Doty, R., Keefe, A., Herrera, G. and Henry, C. 2010. "Segmented Reinforcement Variable Stiffness Materials for Reconfigurable Surfaces, " Journal of Intelligent Material Systems and Structures, 21: 1783-1793.
205. Mesaric, M. and Kosel, F. 2004. "Unsteady Airload of an Airfoil with Variable Camber, " Aerospace Science and Technology, 8: 167-174.
206. Miller, G.D. 1988. "Active Flexible Wing (AFW) Technology," Report: AFWAL-TR-87-3096, Rockwell International North American Aircraft Operations, Los Angeles, CA.
207. Miller, S., Vio, G.A., Cooper, J.E., Vale, J., da Luz, L., Gomes, A., Lau, F., Suleman, A., Cavagna, L., De Gaspari, A., Ricci, S., Riccobene, L., Scotti, A. and Terraneo, M. 2010. "SMorphSmart Aircraft Morphing Technologies Project," In: Proceedings of 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 12-15 April, Orlando, FL, AIAA 2010-2742.
208. Mirone, G. 2007. "Design and Demonstrators Testing of Adaptive Airfoils and Hingeless Wings Actuated by Shape Memory Alloy Wires, " Smart Structures and Systems, 3: 89-114.
209. Mirone, G. and Pellegrino, A. 2009. "Prototipo di Sezione Alare Adattiva per UAV: Centina Deformabile con Attuatori in SMA," In: Proceeding of the XXXVIII Convegno Nazionale, Associazione Italiana per l'Analisi delle Sollecitazioni (AIAS), 9-11 September, Turin, Italy, in Italian.
210. Mistry, M., Gandhi, F. and Chandra, R. 2008. "Twist Control of an I-Beam Through Vlasov Bimoment Actuation," In: Proceedings of 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference, 7-11 April, Schaumburg, IL, AIAA 2008-2278 (12 pp).
211. Mistry, M., Nagelsmit, M., Ganhdi, F. and Gurdal, Z. 2010. "Actuation Requirements of a Warp Induced Variable Twist Rotor Blade," In: Proceedings of AMSE 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2010), 28 September-1 October, Philadelphia, PASMASIS 2010-3615.
212. Monner, H.P. 2001. "Realization of an Optimized Wing Camber by Using Form Variable Flap Structures, " Aerospace Science and Technology, 5: 445-455.
213. Monner, H.P., Bein, T., Hanselka, H. and Breitbach, E. 1998. "Design Aspects of the Adaptive Wing - The Elastic Trailing Edge and the Local Spoiler Bump," Royal Aeronautical Society, Multidisciplinary Design and Optimization, London, UK.
214. Monner, H.P., Kintscher, M., Lorkowski, T. and Storm, S. 2009. "Design of a Smart Droop Nose as Leading Edge High Lift System for Transportation Aircrafts," In: Proceedings of 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4-5 May, Palm Springs, CA, AIAA 2009-2128 (10 pp).
215. Monner, H.P., Sachau, D. and Breitbach, E. 1999. "Design Aspects of the Elastic Trailing Edge for an Adaptive Wing," In: Proceedings of RTO AVT Specialists' Meeting on Structural Aspects of Flexible Aircraft Control, 18-20 October, Ottawa, Canada, Vol. RTOMP-36 (8 pp).
216. Moorhouse, D., Sanders, B., von Spakovsky, M. and Butt, J. 2006. "Benefits and Design Challenges of Adaptive Structures for Morphing Aircraft," Aeronautical Journal, Royal Aeronautical Society, London, 110: 157-162.
217. Munday, D. and Jacob, J. 2001. "Active Control of Separation on a Wing with Conformal Camber," AIAA Journal, 2001-0293.
218. Murray, G., Gandhi, F. and Bakis, C. 2010. "Flexible Matrix Composite Skins for One-Dimensional Wing Morphing, " Journal of Intelligent Material Systems and Structures, 21: 1771-1781.
219. Murua, J., Palacios, R. and Peiro, J. 2010. "Camber Effects in the Dynamic Aeroelasticity of Compliant Airfoils, " Journal of Fluids and Structures, 26: 527-543.
220. Musgrove, R.G. 1976. Unites States Patent 3,944,170, "Apparatus For Producing Pivotal Movement," 16 March 1976.
221. Musgrove, R.G. 1981. Unites States Patent 4,286,761, "Eccentric Actuator," 1 September 1981.
222. Nam, C., Chattopadhyay, A. and Kim, Y. 2002. "Application of Shape Memory Alloy (SMA) Spars for Aircraft Maneuver Enhancement," In: Davis, L.P. (ed.), Proceedings of SPIE Smart Structures and Materials 2002: Smart Structures and Integrated Systems, 15 July, San Diego, CA, Vol. 4701, pp. 226-236.
223. Nam, C., Chen, P.C., Sarhaddi, D., Liu, D., Griffin, K. and Yurkovich, R. 2000. "Torsion-Free Wing Concept for Aircraft Maneuver Enhancement," In: Proceedings of 41st AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 3-6 April, Atlanta, GA, AIAA 2000-1620.
224. Namgoong, H., Crossley, W.A. and Lyrintzis, A.S. 2006. "Aerodynamic Optimization of a Morphing Airfoil Using Energy as an Objective," In: Proceedings of 44th AIAA Aerospace Sciences Meeting and Exhibit, 9-12 January, Reno, NV, AIAA 2006-1324.
225. Neal, D.A., Farmer, J. and Inman, D.J. 2006. "Development of a Morphing Aircraft Model for Wind Tunnel Experimentation," In: Proceedings of 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1-4 May, Newport, RI, AIAA 2006-2141.
226. Neal, D.A., Good, M.G., Johnston, C.O., Robertshaw, H.H., Mason, W.H. and Inman, D.J. 2004. "Desing and Wind-Tunnel Analysis of a Fully Adaptive Aircraft Configuration," In: 45th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 19-22 April, Palm Springs, CA, AIAA 2004-1727.
227. Null, W. and Shkarayev, S. 2005. "Effect of Camber on the Aerodynamics of Adaptive-Wing Micro Air Vehicles, " Journal of Aircraft, 42: 1537-1542. (Pubitemid 43017374)
228. Olympio, K.R. and Gandhi, F. 2010 a. "Flexible Skins for Morphing Aircraft Using Cellular Honeycomb Cores, " Journal of Intelligent Material Systems and Structures, 21: 1719-1735.
229. Olympio, K.R. and Gandhi, F. 2010 b. "Zero Poisson's Ratio Cellular Honeycombs for Flex Skins Undergoing One-Dimensional Morphing, " Journal of Intelligent Material Systems and Structures, 21: 1737-1753.
230. Olympio, K.R., Gandhi, F., Asheghian, L. and Kudva, J. 2010. "Design of a Flexible Skin for a Shear Morphing Wing, " Journal of Intelligent Material Systems and Structures, 21: 1755-1770.
231. Pagano, A., Ameduri, S., Cokonaj, V., Prachar, A., Zachariadis, Z. and Drikakis, D. 2009. "Helicopter Blade Twist Control through SMA Technology: Optimal Shape Prediction, Twist Actuator Realisations and Main Rotor Enhanced Performance Computation," In: Proceedings of 35th European Rotorcraft Forum, 22-25 September, Hamburg, Germany, Paper 1297 (11 pp).
232. Paradies, R. and Ciresa, P. 2009. "Active Wing Design with Integrated Flight Control Using Piezoelectric Macro Fiber Composites," Smart Material and Structure, 18: 035010.
233. Parker, H.F. 1920. "The Parker Variable Camber Wing," Annual Report, National Advisory Committee for Aeronautics, Report No. 77.
234. Peel, L.D., Mejia, J., Narvaez, B., Thompson, K. and Lingala, M. 2008. "Development of a Simple Morphing Wing Using Elastomeric Composites as Skins and Actuators," In: Proceedings of ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2008), 28-30 October, Ellicott City, MD, Paper SMASIS2008-544 (8 pp).
235. Peel, L.D., Mejia, J., Narvaez, B., Thompson, K. and Lingala, M. 2009. "Development of a Simple Morphing Wing Using Elastomeric Composites as Skins and Actuators," Journal of Mechanical Design, 131: 091003 ( 8 pp).
236. Pendleton, E. 2000. "Back to the Future-How Active Aeroelastic Wings are a Return to Aviation's Beginnings and a Small Step to Future Bird-Like Wings," In: Proceedings of RTO AVT Symposium on Active Control Technology for Enhanced Performance Operational Capabilities of Military Aircraft, Land Vehicles, and Sea Vehicles, 8-11 May, Braunschweig, Germany (8 pp).
237. Pendleton, E.W., Bessette, D., Field, P.B., Miller, G.D. and Griffin, K.E. 2000. "Active Aeroelastic Wing Flight Research Program: Technical Program and Model Analytical Development, " Journal of Aircraft, 37: 554-561.
238. Perera, M. and Guo, S. 2009. "Optimal Design of a Seamless Aeroelastic Wing Structure," In: Proceedings of 50th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4-7 May, Palm Springs, CA, AIAA 2009-2195 (14 pp).
239. Perkins, D.A., Reed, J.L. and Havens, E. 2004. "Morphing Wing Structures for Loitering Air Vehicles," In: Proceedings of 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 19-22 April, Palm Springs, CA, AIAA 2004-1888 (10 pp).
240. Perry, R.L. 1966. Variable Sweep: A Case History of Multiple Re-Innovation, p. 3459, The Rand Corporation, Santa Monica, CA.
241. Pinkerton, J.L. and Moses, R.W. 1997. "A Feasibility Study to Control Airfoil Shape Using THUNDER," Technical Memorandum, NASA Langley Research Center, Hampton, VA.
242. Polhamus, E.C. and Hammond, A.D. 1967. "Aerodynamic Research Relative to Variable-Sweep Multimission Aircraft," Langley Research Center, NASA N67-33072.
243. Poonsong, P. 2004. "Design and Analysis of a Multi-Section Variable Camber Wing," Master's Thesis, University of Maryland, MD.
244. Popov, A.V., Labib, M., Fays, J. and Botez, R.M. 2008. "Closed-Loop Control Simulations on a Morphing Wing, " Journal of Aircraft, 45: 1794-1803.
245. Powers, S.G., Webb, L.D., Friend, E.L. and Lokos, W.A. 1992. "Flight Test Results from a Supercritical Mission Adaptive Wing With Smooth Variable Camber," Technical Memorandum, NASA 4415.
246. Prabhakar, T., Gandhi, F. and McLaughlin, D. 2007. "A Centrifugal Force Actuated Variable Span Morphing Helicopter Rotor," In: Proceedings of 63rd Annual AHS International Forum and Technology Display, 1-3 May, Virginia Beach, VA.
247. Prahlad, H. and Chopra, I. 2001. "Design of a Variable Twist Tiltrotor Blade Using Shape Memory Alloy (SMA) Actuators," In: Prahlad, H. (ed.), Proceedings of SPIE Smart Structures and Materials 2001: Smart Structures and Integrated Systems, 16 August, Newport Beach, CA, Vol. 4327, pp. 46-59.
248. Prahlad, H. and Chopra, I. 2002. "Characterization of SMA Torsional Actuators for Active Twist of Tilt Rotor Blades," In: Proceedings of 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference, 22-25 April, Denver, CO, AIAA 2002-1445.
249. Prock, B.C., Weisshaar, T.A. and Crossley, W.A. 2002. "Morphing Airfoil Shape Change Optimization With Minimum Actuator Energy As An Objective," In: Proceedings of 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 4-6 September, Atlanta, GA, AIAA 2002-5401 (13 pp).
250. Reed, J.L., Hemmelgarn, C.D., Pelley, B.M. and Havens, E. 2005. "Adaptive Wing Structures, In: Proceedings of SPIE Smart Structures and Materials 2005: Industrial and Commercial Applications of Smart Structures Technologies, 9 March, San Diego, CA, Vol. 5762.
251. Reich, G.W. and Sanders, B. 2007. "Introduction to Morphing Aircraft Research, " Journal of Aircraft, 44: 1059. (Pubitemid 47345320)
252. Renken, J.H. 1985. "Mission - Adaptive Wing Camber Control Systems for Transport Aircraft," In: Proceedings of 3rd Applied Aerodynamics Conference, 14-16 October, Colorado Springs, CO, AIAA 85-5006.
253. Ricci, S. 2008. "Adaptive Camber Mechanism for Morphing Experiences at DIA-PoliMI," In: Proceedings of Advanced Course on Morphing Aircraft Materials, Mechanisms and Systems, 17-20 November, Lisbon, Portugal.
254. Rodriguez, A.R. 2007. "Morphing Aircraft Technology Survey," In: Proceedings of 45th AIAA Aerospace Sciences Meeting and Exhibit, 8-11 January, Reno, NV, AIAA 2007-1258 (16 pp).
255. Rogers, J.P. and Hagood, N.W. 1997. "Design and Manufacture of an Integral Twist-Actuated Rotor Blade," In: Proceedings of 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Adaptive Structures Forum, Reston, VA.
256. Roglin, R.L. and Hanagud, S.V. 1996. "A Helicopter with Adaptive Rotor Blades for Collective Control, " Smart Materials and Structures, 5: 76-88. (Pubitemid 126689717)
257. Roglin, R.L., Hanagud, S.V. and Kondor, S. 1994. "Adaptive Airfoils for Helicopters," In: Proceedings of 35th AIAA Structures, Structural Dynamics, and Materials Conference, 18-20 April, Hilton Head, SC, pp. 279-287.
258. Roth, B., Peters, C. and Crossley, W. 2002. "Aircraft Sizing with Morphing as an Independent Variable: Motivation, Strategies, and Investigations," In: Proceedings of AIAA Aircraft Technology, Integration, and Operations (ATIO) 2002 Conference, 1-3 October, Los Angeles, CA, AIAA 2002-5840.
259. Ruggeri, R.T., Arbogast, D.J. and Bussom, R.C. 2008 a. "Wind Tunnel Testing of a Lightweight 1/4- Scale Actuator Utilizing Shape Memory Alloy," In: Proceedings of 49th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7-10 April, Schaumburg, IL, AIAA 2008-2279.
260. Ruggeri, R.T., Bussom, R.C. and Arbogast, D.J. 2008 b. "Development of a 1/4-scale NiTinol actuator for reconfigurable structures, In: Proceedings of SPIE Industrial and Commercial Applications of Smart Structures Technologies 2008, 10 March, San Diego, CA, Vol. 6930doi:10.1117/12.7759.
261. Runge, J.B., Osmont, D. and Ohayon, R. 2010. "Twist Control of Aerodynamic Profiles By a Reactive Method (Experimental Results)," In: Proceedings of AMSE 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS2010), 28 September-1 October, Philadelphia, PASMASIS 2010-3824 (10 pp).
262. Rusnell, M.T., Gano, S.E., Perez, V.M., Renaud, J.E. and Batill, S.M. 2004. Morphing UAV Pareto Curve Shift for Enhanced Performance, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 1922 April 2004, Palm Springs, CA, AIAA 2004-1682.
263. Sachs, G. and Mehlhorn, R. 1991. "Endurance Increase by periodic Optimal Camber Control," In: Proceedings of AIAA Guidance, Navigation and Control Conference, August, New Orleans, LA, AIAA 1991-2670, pp. 635-641.
264. Sachs, G. and Mehlhorn, R. 1993. "Enhancement of Endurance Performance by Periodic Optimal Camber Control, " Journal of Guidance, Control, and Dynamics, 16: 572-578. (Pubitemid 23669429)
265. Sahoo, D. and Cesnik, C.E.S. 2002. "Roll Maneuver Control for UCAV Wing Using Anisotropic Piezoelectric Actuators," In: Proceedings of 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 22-25 April, Denver, CO, AIAA 2002-1720 (11 pp).
266. Samareh, J.A., Chwalowski, P., Horta, L.G., Piatak, D.J. and McGowan, A.M.R. 2007. "Integrated Aerodynamic/Structural/ Dynamic Analyses of Aircraft with Large Shape Changes," In: Proceedings of 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 April, Honolulu, HI, AIAA 2007-2346.
267. Sanders, B., Cowan, D. and Scherer, L. 2004. "Aerodynamic Performance of the Smart Wing Control Effectors, " Journal of Intelligent Material Systems and Structures, 15: 293-303.
268. Santangelo, M., Iuspa, L. and Blasi, L. 2006. "Analisi Cineto-Statica di una Struttura Alare Adattiva Hingeless," In: Proceedings of XXXV Convegno Nazionale Associazione Italiana per l'Analisi delle Sollecitazioni (AIAS), 13-16 September, Polytechnic University of Marche, Ancona (in Italian) (7 pp).
269. Santhanakrishnan, A., Pern, N.J., Ramakumar, K., Simpson, A. and Jacob, J.D. 2005. "Enabling Flow Control Technology for Low Speed UAVs," In: Proceedings of Infotech@Aerospace, 26-29 September, Arlington, VA, AIAA 2005-6960 (13 pp).
270. Scott, M.J., Jacob, J.D., Smith, S.W., Asheghian, L.T. and Kudva, J.N. 2009. "Development of a Novel Low Stored Volume High-Altitude Wing Design," In: Proceedings of 50th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4-5 May, Palm Springs, CAAIAA 2009-2146 (12 pp).
271. Seigler, T.M., Bae, J.S. and Inman, D.J. 2004. "Flight Control of a Variable Span Cruise Missile," In: Proceedings of 2004 ASME International Mechanical Engineering Congress and Exposition, 13-19 November, Anaheim, CA, Paper No. IMECE2004-61961.
272. Seigler, T.M., Neal, D.A., Bae, J.S. and Inman, D.J. 2007. "Modeling and Flight Control of Large-Scale Morphing Aircraft, " AIAA Journal of Aircraft, 44: 1077-1087. (Pubitemid 47345323)
273. Seow, A.K., Liu, Y. and Yeo, W.K. 2008. "Shape Memory Alloy as Actuator to Deflect a Wing Flap," In: Proceedings of 49th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7-10 April, Schaumburg, IL, AIAA 2008-1704.
274. Shelton, A., Tomar, A., Prasad, J., Smith, M.J. and Komerath, N. 2006. "Active Multiple Winglets for Improved Unmanned-Aerial-Vehicle Performance, " Journal of Aircraft, 43: 110-116.
275. Shili, L., Wenjie, G. and Shujun, L. 2008. "Optimal Design of Compliant Trailing Edge for Shape Changing, " Chinese Journal of Aeronautics, 21: 187-192.
276. Shin, S.J. 2001. "Integral Twist Actuation of Helicopter Rotor Blades for Vibration Reduction," PhD Thesis, Massachusetts Institute of Technology.
277. Shin, S.J., Cesnik, C.E.S. and Hall, S.R. 2002. "Control of Integral Twist-Actuated Helicopter Blades for vibration Reduction, In: Proceedings of 58th American Helicopter Society Annual Forum, 11-13 June, Montreal, Canada, Vol. 2, pp. 2122-2134.
278. Shkarayev, S., Null, W. and Wagner, M. 2004. "Development of Micro Air Vehicle Technology with In-Flight Adaptive Wing Structure," Contractor Report, NASA Langley Research Center, Hampton, VA.
279. Shortal, J.A. and Maggin, B. 1946. "Effect of Sweepback and Aspect Ratio on Longitudinal Stability Characteristics of wings at Low Speeds," Langley Memorial Aeronautical Laboratory, NACA TN- 1093.
280. Shyy, W., Aono, H., Chimakurthi, S.K., Trizila, P., Kang, C.K., Cesnik, C.E.S. and Liu, H. 2010. "Recent Progress in Flapping Wing Aerodynamics and Aeroelasticity, " Progress in Aerospace Sciences, 46: 284-327.
281. Shyy, W., Jenkins, D. and Smith, R. 1997. "Study of Adaptive Shape Airfoils at Low Reynolds Number in Oscillatory Flows, " AIAA Journal, 35: 1545-1548. (Pubitemid 127543097)
282. Siclari, M.J., Van Nostrand, W. and Austin, F. 1996. "The Design of Transonic Airfoil Sections for an Adaptive Wing Concept Using a Stochastic Optimization Method," In: Proceedings of 34th Aerospace Sciences Meeting and Exhibit, 15-18 January, Reno, NV, AIAA 1996-0329.
283. Simpson, J., Anguita-Delgado, L., Kawieski, G., Nilsson, B., Vaccaro, V. and Kawiecki, G. 2005. "Review of European Research Project "Active Aeroelastic Aircraft Structures (3AS)," In: Proceedings of European Conference for Aerospace Sciences (EUCASS), 4-7 July, Moscow, Russia (9 pp).
284. Singh, K. and Chopra, I. 2002. "Design of an Improved Shape Memory Alloy Actuator for Rotor Blade Tracking," In: Proceedings of 2002 Society of Photo-Optical Instrumentation Engineers' North American Symposium on Smart Structures and Materials, 17-21 March, Newport Beach, CA, Vol. 4701, pp. 244-266.
285. Singh, V., Skiles, S.M., Krager, J.E., Wood, K.L., Jensen, D. and Sierakowski, R. 2009. "Innovations in Design Through Transformation: A Fundamental Study of Transformation Principles," Journal of Mechanical Design, 131: doi: 10.1115/ 1.3125205.
286. Skillen, M.D. and Crossley, W.A. 2006. "Developing Morphing Wing Weight Predictors with Emphasis on the Actuating Mechanism," In: Proceedings of 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1-4 May, Newport, RI, AIAA 2006-2042 (17 pp).
287. Skillen, M.D. and Crossley, W.A. 2008 a. "Modeling and Optimization for Morphing Wing Concept Generation II Part I: Morphing Wing Modeling and Structural Sizing Techniques," NASA Report, NASA /CR- 2008-214902.
288. Skillen M.D. and Crossley, W.A. 2008 b. "Morphing Wing Weight Predictors and Their Application in a Template-Based Morphing Aircraft Sizing Environment II, Part II: Morphing Aircraft Sizing Via Multi-Level Optimization," NASA Report, CR- 2008-214903.
289. Smith, K., Butt, J., Spakovsky, M.R. and Moorhouse, D. 2007. "A Study of the Benefits of Using Morphing Wing Technology in Fighter Aircraft Systems," In: Proceedings of 39th AIAA Thermophysics Conference, 25-28 June, Miami, FL, AIAA 2007-4616 (12 pp).
290. Smith, D.D., Isikveren, A.T., Ajaj, R.M. and Firswell, M.I. 2010. "Multidisciplinary Design Optimization of an Active Nonplanar Polymorphing Wing," In: Proceedings of 27th International Congress of the Aeronautical Sciences (ICAS 2010), 19-24 September, Nice, France.
291. Smith, J.W., Lock, W.P. and Payne, G.A. 1992. "Variable Camber Systems Integration and Operational Performance of the AFTI/ F-111 Mission Adaptive Wing," Technical Memorandum, NASA Dryden Flight Research Center, Edwards, CA.
292. Smith, S.B. and Nelson, D.W. 1990. "Determination of the Aerodynamic Characteristics of the Mission Adaptive Wing, " Journal of Aircraft, 27: 950-958.
293. Sofla, A.Y.N., Elzey, D.M. and Wadley, H.N.G. 2008. "Two-Way Antagonistic Shape Actuation Based on the One-Way Shape Memory Effect, " Journal of Intelligent Material Systems and Structures, 19: 1017-1027.
294. Sofla, A.Y.N., Meguid, S.A., Tan, K.T. and Yeo, W.K. 2010. "Shape Morphing of Aircraft Wing: Status and Challenges, " Materials and Design, 31: 1284-1292.
295. Song, G. and Ma, N. 2007. "Robust Control of a Shape Memory Alloy Wire Actuated Flap, " Smart Materials and Structures, 16: N51 - N57.
296. Song, A., Tian, X., Israeli, E., Galvao, R., Bishop, K., Swartz, S. and Breuer, K. 2008. "Aeromechanics of Membrane Wings with Implications for Animal Flight, " AIAA Journal, 46: 2096-2106.
297. Song, D., Wang, H., Zeng, L. and Yin, C. 2001. "Measuring the Camber Deformation of a Dragonfly Wing Using Projected Comb Fringe, " Review of Scientific Instruments, 72: 2450-2454. (Pubitemid 33606270)
298. Spangler, R.L. and Hall, S.R. 1990. "Piezoelectric actuators for helicopter rotor control," In: Proceedings of 31st AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2-4 April, Long Beach, CA, AIAA -1990-1076.
299. Spillman, J. 1992. "The Use of Variable Camber to Reduce Drag, Weight and Costs of Transport Aircraft, " Aeronautical Journal, 96: 1-9.
300. Stanewsky, E. 2001. "Adaptive Wing and Flow Control Technology, " Progress in Aerospace Sciences, 37: 583-667. (Pubitemid 33039392)
301. Stanford, B., Abdulrahim, M., Lind, R. and Ifju, P. 2007. "Investigation of Membrane Actuation for Roll Control of a Micro Air Vehicle, " Journal of Aircraft, 44: 741-749. (Pubitemid 47110965)
302. Steadman, D.L., Griffin, S.L. and Hanagud, S.V. 1994. "Structure-Control Interaction and the Design of Piezoceramic Actuated Adaptive Airfoils," In: Proceedings of AIAA/ASME Adaptive Structures Forum, 21-22 April, Hilton Head, SC, AIAA 1994-1747, pp. 135-142.
303. Straub, F., Anand, V.R., Birchette, T. and Lau, B.H. 2009. "SMART Rotor Development and Wind Tunnel Test," In: Proceedings of 35th European Rotorcraft Forum 2009 (ERF 2009), 22-25 September, Hamburg, Germany, Article 1200 (21 pp).
304. Straub, F.K., Ngo, H.T., Anand, V. and Domzalski, D.B. 2001. "Development of a Piezoelectric Actuator for Trailing-Edge Flap Control for Full Scale Rotor System, " Smart Materials and Structures, 10: 25-34. (Pubitemid 32253487)
305. Strelec, J.K., Lagoudas, D.C., Khan, M.A. and Yen, J. 2003. "Design and Implementation of a Shape Memory Alloy Actuated Reconfigurable Airfoil, " Journal of Intelligent Material Systems and Structures, 14: 257-273.
306. Studebaker, K. and Matuska, D. 1993. "Variable Diameter Tiltrotor Wind Tunnel Test Results," In: Proceedings of American Helicopter Society 49th Annual Forum, May, St. Louis, MO.
307. Sullivan, J. and Watkins, W. 2003. "Obliquing Wing with Extendable Span Critical Design Review," Critical Design Review, AAE 490T/590T AT 490D Tech 581N Design/Build/Test, Purdue University, IN.
308. Supekar, A.H. 2007. "Design, Analysis and Development of a Morphable Wing Structure for Unmanned Aerial Vehicle Performance Augmentation," Master's Thesis, University of Texas at Arlington, TX.
309. Szodruch, J. 1985. "The Influence of Camber Variation on the Aerodynamics of Civil Transport Aircraft," In: Proceedings of 23rd Aerospace Sciences Meeting, 14-17 January, Reno, NV, AIAA 85-0353.
310. Szodruch, J. and Hilbig, R. 1988. "Variable Wing Camber for Transport Aircraft, " Progress in Aerospace Sciences, 25: 297-328. (Pubitemid 18655459)
311. Thill, C., Etches, J., Bond, I., Potter, K. and Weaver, P. 2008. "Morphing Skins," The Aeronautical Journal, 112: 117-139. (Pubitemid 351628989)
312. Thill, C., Etches, J.A., Bond, I.P., Potter, K.D. and Weaver, P.M. 2010. "Composites Corrugated Structures for Morphing Wing Skin Applications," Smart Materials and Structures, 19: 124009.
313. Thornton, S.V. 1993. "Reduction of Structural Loads Using Maneuver Load Control on the Advanced Fighter Technology Integration (AFTI)/F-111 Mission Adaptive Wing," NASA TM 4526.
314. Torres, G.E., 2002. "Aerodynamics of Low Aspect Ratio Wings at Low Reynolds Numbers with Applications to Micro Air Vehicle Design," PhD Dissertation, Aerospace and Mechanical Engineering Department, University of Notre Dame, South Bend, IN.
315. Turnock, S.R. and Keane, A.J. 2009. "Morphing of 'Flying' Shapes for Autonomous Underwater and Aerial Vehicles," In: Proceedings of RTO Applied Vehicle Technology Panel (AVT) Symposium, 20-24 April, Evora, Portugal (19 pp).
316. Ursache, N.M., Melin, T., Isikveren, A.T. and Friswell, M.I. 2007. "Morphing Winglets for Aircraft Multi-Phase Improvement," In: Proceedings of 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO), 18-20 September, Belfast, Northern Ireland, AIAA 2007-7813 (12 pp).
317. Ursache, N.M., Melin, T., Isikveren, A.T. and Friswell, M.I. 2008. "Technology Integration for Active Poly-Morphing Winglets Development," In: Proceedings of ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS08), 28-30 October, Ellicott City, MD, SMASIS 2008-496 (8 pp).
318. Vale, J., Lau, F., Suleman, A. and Gamboa, P. 2006. " Multidisciplinary Design Optimization of a Morphing Wing for an Experimental UAV," In: Proceedings of 11th AIAA/ ISSMO Multidisciplinary Analysis and Optimization Conference, 6-8 September, Portsmouth, VA, AIAA 2006-7131.
319. Vale, J., Lau, F., Suleman, A. and Gamboa, P. 2007. "Optimization of a Morphing Wing Based on Coupled Aerodynamic and Structural Constraints," In: Proceedings of 3rd AIAA MultiDisciplinary Design Optimization Specialists Conference, 23-26 April, Honolulu, HI, AIAA 2007-1890 (27 pp).
320. van Dam, C.P. 2002. "The Aerodynamic Design of Multi-Element High-Lift Systems for Transport Airplanes," Progress in Aerospace Sciences, 38: 101-144. (Pubitemid 34506065)
321. Vos, R., Barrett, R., de Breuker, R. and Tiso, P. 2007 a. "Post-Buckled Precompressed Elements: a New Class of Control Actuators for Morphing Wing UAVs," Smart Materials and Structures, 16: 919-926. (Pubitemid 46804864)
322. Vos, R., Barrett, R. and Zehr, D. 2008 a. "Magnification of Work Output in PBP Class Actuators Using Buckling/Converse Buckling Techniques," In: Proceedings of 49th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7-11 April, Schaumburg, IL, AIAA 2008-1705.
323. Vos, R., De Breuker, R., Barrett, R. and Tiso, P. 2007 b. "Morphing Wing Flight Control via Postbuckled Precompressed Piezoelectric Actuators, " Journal of Aircraft, 44: 1060-1068. (Pubitemid 47345321)
324. Vos, R., Gurdal, Z. and Abdalla, M. 2008 b. "A Novel Mechanism for Active Wing Warping," In: Proceedings of 49th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7-11 April, Schaumburg, IL, AIAA 2008-1879.
325. Vos, R., Gurdal, Z. and Abdalla, M. 2010. "Mechanism for Warp-Controlled Twist of a Morphing Wing, " Journal of Aircraft, 47: 450-457.
326. Wang, D.P., Bartley-Cho, J.D., Martin, C.A. and Hallam, B.J. 2001. "Development of High-Rate, Large Deflection, Hingeless Trailing Edge Control Surface for the Smart Wing Wind Tunnel Model," In: Proceedings of SPIE Smart Structures and Materials 2001: Industrial and Commercial Applications of Smart Structures Technologies, 5-8 March, Newport Beach, CA, Vol. 4332, pp. 407-418.
327. Wang, J.M., Jones, C.T. and Nixon, M.W. 1999. "A Variable Diameter Short Haul Civil Tiltrotor," In: Proceedings of 55th Annual Forum of the American Helicopter Society, 25-27 May, Montreal, Canada (8 pp).
328. Warwick, G. 2009. "Morphing Methods," Aviation Week & Space Technology, p. 55.
329. Waszak, M.R., Jenkins, L.N. and Ifju, P.G. 2001. "Stability and Control Properties of an Aeroelastic Fixed Wing Micro Aerial Vehicle," In: AIAA Atmospheric Flight Mechanics Conference, 6-9 August, Montreal, Canada, AIAA 2001-4005 (11 pp).
330. Weiss, P. 2003. "Wings of Change: Shape-Shifting Aircraft may Ply Future Skyways," Science News, 164: 359, 362 and 365.
331. Weisshaar, T.A. 2006. "Morphing Aircraft Technology - New Shapes for Aircraft Design," RTO-MP-AVT-141, Neuilly-sur-Seine, France.
332. Wereley, N.M. and Gandhi, F. 2010. "Flexible Skins for Morphing Aircraft, " Journal of Intelligent Material Systems and Structures, 21: 1697-1698.
333. Wickramasinghe, V.K., Chen, Y., Martinez, M., Kernaghan, R. and Wong, F. 2009. "Design and Verification of a Smart Wing for an Extremely-Agile Micro-Air-Vehicle," In: Proceedings of 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4-7 May, Palm Springs, CA, AIAA 2009-2132 (11 pp).
334. Wiggins, L.D., Stubbs, M.D., Johnston, C.O., Robertshaw, H.H., Reinholtz, C.F. and Inman, D.J. 2004. "A Design and Analysis of a Morphing Hyper-Elliptic Cambered Span (HECS) Wing," In: Proceedings of 45th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conference, 19-22 April, Palm Springs, CA, AIAA 2004-1885 (10 pp).
335. Wilbur, M.L. and Wilkie, W.K. 2004. "Active-Twist Rotor Control Applications for UAVs," Report, US Army Research Laboratory Vehicle Technology Directorate, Hampton, VA.
336. Wildschek, A., Grünewald, M., Maier, R., Steigenberger, J., Judas, M., Deligiannidis, N. and Aversa, N. 2008. "Multi-Functional Morphing Trailing Edge Device for Control of All-Composite, All-Electric Flying Wing Aircraft," In: Proceedings of The 26th Congress of International Council of the Aeronautical Sciences (ICAS), 14-19 September, Anchorage, Alaska, AIAA 2008-8956.
337. Wilson, J.R. 2002. "Active Aeroelastic Wing: A New/Old Twist on Flight, " Aerospace America, 40: 34-37.
338. Wittmann, J., Steiner, H.-J. and Sizmann, A. 2009. "Framework for Quantitative Morphing Assessment on Aircraft System Level," In: Proceedings of 0th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4-7 May, Palm Springs, CA, AIAA J. 2009-2129 (18 pp).
339. Yang, S.M., Han, J.H. and Lee, I. 2006. "Characteristics of Smart Composite Wing with SMA Actuators and Optical Fiber Sensors, " International Journal of Applied Electromagnetics and Mechanics, 23: 177-186. (Pubitemid 44395378)
340. Yu, Y., Li, X., Zhang, W. and Leng, J. 2007. "Investigation on Adaptive Wing Structure based on Shape Memory Polymer Composite Hinge, In: Proceedings of SPIE International Conference on Smart Materials and Nanotechnology in Engineering, 1 July, Harbin, China, Vol. 6423. doi:10.1117/ 12.779394 (7 pp).
341. Zhang, Q. and Hoffmann, F. 2009. "Benefit Studies for Rotor with Active Twist Control Using Weak Fluid-Structure Coupling," In: Proceedings of 35th European Rotorcraft Forum, 22-25 September, Hamburg, Germany, Article 1217.
342. Zhao, L., Dawes, W.N., Parks, G., Jarrett, J.P. and Yang, S. 2009. "Robust Airfoil Design with Respect to Boundary Layer Transition," In: Proceedings of 50th AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics, and Materials Conference, 4-7 May, Palm Springs, CA, AIAA 2009-2273 (11 pp).