Optimization of a morphing wing based on coupled aerodynamic and structural constraints

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Volumn 3, Issue , 2007, Pages 2281-2307

  Vale, J ^a,c   Lau, F ^a,c   Suleman, A ^a,d,e   Gamboa, P ^b,d,f  

^a INSTITUTO SUPERIOR TÉCNICO   (Portugal)

^b UNIVERSITY OF BEIRA INTERIOR   (Portugal)

^c Mechanical Engineering Department   (Portugal)

^d AIAA   (United States)

^e UNIVERSITY OF VICTORIA   (Canada)

^f Aerospace Sciences Department   (Portugal)

Author keywords

[No Author keywords available]

Indexed keywords

MORPHING MODELS; OPTIMIZATION ALGORITHMS; SEQUENTIAL QUADRATIC PROGRAMMING (SQP); WIND TUNNEL TESTING;

AERODYNAMICS; COMPUTATIONAL METHODS; CONSTRAINT THEORY; OPTIMIZATION; QUADRATIC PROGRAMMING; UNMANNED AERIAL VEHICLES (UAV); WIND TUNNELS;

WINGS;

EID: 34547497559     PISSN: 02734508     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (29)

1. Love, M., Zink, P., Stroud, R., Bye, D., and Chase, C., "Impact of Actuation Concepts on Morphing Aircraft Structures," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, California, 19-22 April 2004.
2. Bae J.-S., Seigler T., Inman D. J. and Lee I, "Aerodynamic and Aeroelastic Considerations of a Variable-Span Morphing Wing," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, California, 19-22 April 2004.
3. Ramrkahyani D., Lesieutre G. A., Frecker M. and Bharti, "Aircraft Structural Morphing Using Tendom Actuated Compliant Cellular Trusses," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, California, 19-22 April 2004.
4. Gano, S. E., Pérez, V. M., Renaud, J. E., Batill, S. M., and Sanders, B., "Multilevel Variable Fidelity Optimization of a Morphing Unmanned Aerial Vehicle," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, California, 19-22 April 2004.
5. Rusell, M. T., Gano, S. E., Pérez, V., M., Renaud, J. E., and Batill, S. M., "Morphing UAV Pareto Curve Shift for Enhanced Performance," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, California, 19-22 April 2004.
6. Hicks, R., and Henne, P. "Wing Design by Numerical Optimization," Journal of Aircraft, Vol. 15, No. 7, July 1978, pp. 407-413.
7. Huyse, L., Padula, S., Lewis, R., and Li, W., "Probabilistic Approach to Free-Form Airfoil Shape Optimization Under Uncertainty," AIAA Journal, Vol. 40, No. 9, September 2002, pp. 1764-1772.
8. Nemec, M., and Zigg, D., "Multi-Point and Multi-Objective Aerodynamic Shape Optimization," 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Opiimization, 4-6 September 2002.
9. Reuther, J., Alonso, J., Jameson, A., Eimlinger, M., and Saunders, D., "Constrained Multipoint Aerodynamic Shape Optimization Using an Adjoint Formulation and Parallel Computers: Part I," Journal of Aircraft, Vol. 36, No. 1, 1999, pp. 51-60.
10. Reuther, J., Alonso, J., Jameson, A., Eimlinger, M., and Saunders, D., "Constrained Multipoint Aerodynamic Shape Optimization Using an Adjoint Formulation and Parallel Computers: Part II," Journal of Aircraft, Vol. 36, No. 1, 1999, pp. 61-74.
11. Martins, J., A Coupled-Adjoint Method for High-Fidelity Aero-Structural Optimization, PhD thesis, Standfbrd University, November 2002.
12. Secanell, M., Suleman, A., and Gamboa, P., "Design of a Morphing Airfoil Using Aerodynamic Shape Optimization", AIAA Journal, Vol. 44, No. 7, July 2006, pp. 1550-1562.
13. Perkins, D., Reed, J., and Havens, Jr., E., "Morphing Wing Structures for Loitering Air Vehicles", 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, California, 19-22 April 2004.
14. Forster, E., Sanders, B., and Eastep, F. E., "Aerodynamic and Aeroelastic Characteristics of Wings with Conformal Control Surfaces for Morphing Aircraft", Journal of Aircraft 40, no. 1.
15. Blondeau, J. E., and Pines, D. J., "Pneumatic Morphing Aspect Ratio Wing", 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, California, 19-22 April 2004.
16. Reich, G. W., and Maute, K., "An Aeroelastic Topology Optimization Approach for Adaptive Wing Design", 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, California, 19-22 April 2004.
17. Abdulrahim, M., and Lind, R., "Flight Testing and Response Characteristics of a Variable Gull-wing Morphing Aircraft", University of Florida, 2004.
18. Manzo, J. E., "Analysis and Design of a Hyper Elliptical Cambered Span Morphing Aircraft Wing", Cornell University, 2006.
19. Cadogan, D., Smith, T., Uhelsky, F., and MacKusick, M., "Morphing Inflatable Wing Development for Compact Package Unmanned Aerial Vehicles", AIAA2004-1807, 2004.
20. Tobushi, H., Hara, H., Yamada, E., and Hayashi, S., " Thermomechanical Properties in a Thin Film of Shape Memory Polymer of Polyurethane Series", Smart Materials and Structures, no 5 (1996), pp. 483-491.
21. Moniz, P. A. A., Adaptive Aeroelastic Aircraft Structures, PhD thesis, Instituto Superior Tecnico, Universidade Técnica de Lisboa, Lisbon, 2005.
22. Drela, M., XFOIL 6.94 User Guide, MIT Aero & Astro Harold Youngren, Aerocraft, Inc., 10 December 2001.
23. Anderson, J. D., Corda, S., and Wie, D. M. V., "Numerical Lifting Line Theory Applied to Drooped Leading-Edge Wings Below and Above Stall," Journal of Aircraft, Vol. 17, No. 12, 1980, pp. 898-904.
24. Spellucci, P., DONLP2 Users Manual, Technical University at Darmstadt, Department of Mathematics.
25. ANSYS, Inc. Ansys® Release 8.0 Theory - Reference.Guide.
26. Seifert, S., Küster, S., and Dillmann, R., "Comparison of Yeoh, Mooney-Rivlin and St Venan-Kirchhoff Materials for Passive Modelling of Skeletal Muscles," Engineering Computations, Vol. 14, No. 2, 1997, pp. 216-232.
27. van den Bogert, P., and de Borst, R., "On the Behaviour of Rubber-like Materials in Compression and Shear", Archive of Applied Mechanics, Vol 64 (1994), pp. 136-146.
28. PoIymerFEM, http://polymerfem.com/modules.php?name= Materials_Models&rnaterial=8, March 2007.
29. rd ed., AIAA Education Series, AIAA, 1999, pp. 476.