Rapid prototyping and rapid manufacturing in medicine and dentistry: This paper presents an overview of recent developments in the field of rapid prototyping and rapid manufacturing with special emphasis in medicine and dentistry

Virtual and Physical Prototyping

Volumn 6, Issue 2, 2011, Pages 79-109

  Syam, Wahyudin P ^a,b   Mannan, M A ^a,b   Al Ahmari, A M ^a,b  

^a KING SAUD UNIVERSITY   (Saudi Arabia)

^b Princess Fatimah Alnijris's Research Chair for Advance Manufacturing Technology (FARCAMT)   (Saudi Arabia)

Author keywords

Dental application; Implant; Medical application; Rapid manufacturing; Rapid prototyping; Scaffolds

Indexed keywords

BIOCOMPATIBLE MATERIALS; BIOLOGICAL MODELS; CITED PAPERS; COMPLEX SHAPES; CURRENT STATUS; DENTAL APPLICATIONS; EMERGING TRENDS; FUTURE DIRECTIONS; LATEST DEVELOPMENT; MEDICAL IMPLANTS; RAPID MANUFACTURING; SELECTIVE LASER MELTING; SELECTIVE LASER SINTERING; TI-6AL-4V;

CHROMIUM; COBALT; DENTAL ALLOYS; DENTISTRY; ELECTRON BEAMS; FABRICATION; GROWTH KINETICS; IMPLANTS (SURGICAL); LASER HEATING; MEDICAL APPLICATIONS; MELTING; MODELS; PROSTHETICS; RAPID PROTOTYPING; SCAFFOLDS (BIOLOGY); SINTERING; TECHNOLOGY; TISSUE; TITANIUM; TITANIUM ALLOYS;

DENTAL PROSTHESES;

EID: 79960693798     PISSN: 17452759     EISSN: 17452767     Source Type: Journal    
DOI: 10.1080/17452759.2011.590388     Document Type: Review

References (73)

1. Arafat, M.T., Lam, C.X.F., Ekaputra, A.K., Wong, S.Y., Li, X. and Gibson, I., 2011. Biomimetic composite coating on rapid prototyped scaffolds for bone tissue engineering. Acta Biomaterialia, 7, 809-820.
2. Arcam, AB, 2010. Arcam EBM model A2: Manual book. Guttenberg, Sweden: Arcam AB.
3. Bernard, A. and Fischer, A., 2002. New trends in rapid product development. CIRP Annals: Manufacturing Technology, 51, 635-652.
4. Booysen, G.F., Barnard, L.F., Truscott, M. and De Beer, D.J., 2006. Anaesthetic mouthpiece development through QFD and customer interaction with functional prototypes. Rapid Prototyping Journal, 12, 89-197.
5. Byrne, D.P., Lacroix, D., Planell, J.A., Kelly, D.J. and Prendergast, P.J., 2007. Simulation of tissue differentiation in a scaffold as a function of porosity, Young's modulus and dissolution rate: Application of mechanobiological models in tissue engineering. Biomaterials, 28, 5544-5554.
6. Cansizoglu, O., Harrysson, O., Cormier, D., West, H. and Mahale, T., 2008a. Properties of Ti-6Al-4V non-stochastic lattice structures fabricated via electron beam melting. Material Science Engineering A, 492, 468-474.
7. Cansizoglu, O., Harrysson, O.L.A., West, H.A., Cormier, D.R. and Mahale, T., 2008b. Applications of structural optimization in direct metal fabrication. Rapid Prototyping Journal, 14, 114-22.
8. Chen, Z., Li, D., Lu, B., Tang, Y., Sun, M. and Wang, Z., 2004. Fabrication of artificial bioactive bone using rapid prototyping. Rapid Prototyping Journal, 10, 327-333.
9. Chryssolouris, G., Papakostas, N. and Mavrikios, D., 2008. A Perspective on manufacturing strategy: Produce more with less. CIRP Journal of Manufacturing Science and Technology, 1, 45-52.
10. De Beer, D.J., Truscott, M., Booysen, G.J., Barnard, L.J. and van der Walt, J.G., 2005. Rapid manufacturing of patient-specific shielding masks, using RP in parallel with metal spraying. Rapid Prototyping Journal, 11, 298-303.
11. Dowson, D., Hardaker, C., Flett, M. and Isaac, G.H., 2004. A hip joint simulator study of the performance of metal-on-metal joints. The Journal of Arthroplasty, 19 (8), 118-123.
12. D'urso, P.S., Thompson, R.G. and Earwaker, W.J., 2000. Stereolithographic (SL) biomodelling in paleontology: A technical note. Rapid Prototyping Journal, 6, 212-215.
13. Engel., B. and Bourell, D.L., 2000. Titanium alloy powder preparation for selective laser sintering. Rapid Prototyping Journal, 6, 97-106.
14. Facchini, L., Magalini, E., Robotti, P., Molinari, A., Hoges, S. and Wissenbach, K., 2010. Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders. Rapid Prototyping Journal, 16, 450-459.
15. Fantini, M., de Crescenzio, F., Persiani, F., Benazzi, S. and Gruppionio, G., 2008. 3D restitution, restoration, and prototyping of a medieval damaged skull. Rapid Prototyping Journal, 14, 318-324.
16. Ganz, S.D., 2005. Presurgical planning with CT-derived fabrication of surgical guide. Journal of Oral Maxillofacial Surgery, 63, 59-71.
17. Gao, B., Wu, J., Zhao, X. and Tan, H., 2009. Fabricating titanium denture base plate by laser rapid forming. Rapid Prototyping Journal, 15, 133-136.
18. Geng, L., Feng, W., Hutmacher, D.W., Wong, Y.S., Loh, H.T. and Fuh, J.F.Y., 2005. Direct writing of chitosan scaffold using a robotic system. Rapid Prototyping Journal, 11, 90-97.
19. Gopakumar, S., 2004. RP in medicine: A case study in cranial reconstructive surgery. Rapid Prototyping Journal, 10, 207-211.
20. Harryson, O.L.A., Cansizoglu, O., Marcellin-Little, D.J., Cormier, D.R. and West II, H.A.W., 2008. Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology. Materials Science and Engineering C, 28, 366-373.
21. Harrysson, O.L.A., Cormier, D.R., Marcellin-Little, D.F. and Fajal, K., 2003. Rapid prototyping for treatment of canine limb deformities. Rapid Prototyping Journal, 9, 37-42.
22. He, J., Li, D. and Lu, B., 2006. Custom fabrication of a composite hemiknee joint based on rapid prototyping. Rapid Prototyping Journal, 12, 198-205.
23. Heinl, P., Muller, L., Korner, C., Singer, R.F. and Muller, F.A., 2008. Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomaterialia, 4, 1536-1544.
24. Heinl, P., Rottmair, A., Korner, C. and Singer, R.F., 2007. Cellular titanium by selective electron beam melting. Advance Engineering Materials, 9, 360-364.
25. Hollister, S.J., Maddox, R.D. and Taboas, J.M., 2002. Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials, 23, 4095-4103.
26. Hopkins, N., Hague, R.J.M., and Dickens, P.M., 2006. Rapid manufacturing: An industial revolution for the digital age. UK: John Wiley and Sons.
27. Hutmacher, D.W., 2000. Scaffolds in tissue engineering bone and cartilage. Biomaterials, 21, 2529-2543.
28. Kanungo, B.P., Silva, E., Vliet, K.V. and Gibson, L.J., 2008. Characterization of mineralized collagen-glycosaminoglycan scaffolds for bone regeneration. Acta Biomaterialia, 4, 490-503.
29. Kruth, J.P., Levy, G., Klocke, F. and Childs, T.H.C., 2007. Consolidation phenomena in laser and powder-bed based layered manufacturing. CIRP annals: Manufacturing Technology, 56 (3), 730-759.
30. Kruth, J.P., Mercelis, P., van Vaerenbergh, J., Froyen, L. and Rombouts, M., 2005. Binding mechanism in selective laser sintering and selective laser melting. Rapid Prototyping Journal, 11, 26-36.
31. Levy, G.N., Schindel, R. and Kruth, J.P., 2003. Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspective. CIRP Annals: Manufacturing Technology, 52, 589-609.
32. Li, X., Li, D., Lu, B., Tang, Y., Wang, L. and Wang, Z., 2005a. Design and fabrication of CAP scaffolds by indirect solid free form fabrication. Rapid Prototyping Journal, 11 (5), 312-318.
33. Li, X., Wang, J., Shaw, L.L. and Cameron, T.B., 2005b. Laser densification of extruded dental porcelain bodies in multi-material laser densification process. Rapid Prototyping Journal, 11, 52-58.
34. Li, X., Wang, C., Zhang, W. and Li, Y., 2009. Fabrication and characterization of porous Ti6Al4V parts for biomedical applications using electron beam meting process. Materials Letters, 63, 403-405.
35. Li, X., Wang, C., Zhang, W. and Li, Y., 2010. Fabrication and compressive properties of Ti6Al4V implant with honeycomb-like structure for biomedical applications. Rapid Prototyping Journal, 16, 44-49.
36. Liu, C.Z., Sachlos, E., Wahl, D.A., Han, Z.W. and Czernuszka, J.T., 2007b. On the manufacturability of scaffold mould using 3D printing technology. Rapid Prototyping Journal, 13, 163-174.
37. Liu, C., Xia, Z. and Czernuszka, J.T., 2007a. Design and development of three-dimensional scaffolds for tissue engineering. Chemical Engineering Research and Design, 85, 1051-1064.
38. Luo, R.C., Chang, Y.C., and Tzou, J.H., 2001. The development of a new adaptive slicing algorithm for layered manufacturing system. Proceeding of the 2001 IEEE International Conference on Robotics & Automation.
39. Mercelis, P. and Kruth, J.P., 2006. Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyping Journal, 12, 254-265.
40. Moroni, L., de Wijn, J.R. and van Blitterswijk, C.A., 2006. 3D fiberdeposited scaffolds for tissue engineering: Influence of pores geometry and architecture on dynamic mechanical properties. Biomaterials, 27, 974-985.
41. Murr, L.E., Esquivel, E.V., Quinones, S.A., Gaytan, S.M., Lopez, M.I., Martinez, E.Y., Medina, F., Hernandez, D.H., Martinez, E., Martinez, J.L., Stafford, S.W., Brown, D.K., Hoppe, T., Meyers, W., Lindhe, U. and Wicker, R.B., 2009a. Microstructures and mechanical properties of electron beam rapid manufactured Ti-6Al-4V biomedical prototypes compared to wrought Ti-6Al-4V. Materials Characterization, 60, 96-105.
42. Murr, L.E., Gaytan, S.M., Ceylan, A., Martinez, E., Martinez, J.L., Hernandez, D.H., Machado, B.I., Ramirez, D.A., Medina, F., Collins, S. and Wicker, R.B., 2010a. Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting. Acta Materialia, 58, 1887-1894.
43. Murr, L.E., Gaytan, S.M., Medina, F., Martinez, E., Martinez, J.L., Hernandez, D.H., Machado, B.I., Ramirez, D.A. and Wicker, R.B., 2010b. Characterization of Ti-6Al-4V open cellular foams fabricated by additive manufacturing using electron beam melting. Material Science and Engineering A, 527, 1861-1868.
44. Murr, L.E., Quinones, S.A., Gaytan, S.M., Lopez, M.I., Rodela, A., Matinez, E.Y., Hernandez, D.H., Martinez, E., Medina, F. and Wicker, R.B., 2009b. Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing for biomedical application. Journal of the Mechanical Behavior of Biomedical Material, 2, 20-32.
45. Naing, M.W., Chua, C.K., Leong, K.F. and Wang, Y., 2005. Fabrication of customized scaffolds using computer-aided design and rapid prototyping techniques. Rapid Prototyping Journal, 11, 249-259.
46. Ng, P., Lee, P.S.V. and Goh, F.C.H., 2002. Prosthetic socket fabrication using rapid prototyping technology. Rapid Prototyping Journal, 8, 53-59.
47. Parthasaraty, J., Starly, B., Raman, S. and Christensen, A., 2010. Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). Journal of the Mechanical Behavior of Biomedical Materials, 3, 249-259.
48. Pham, D.T. and Gault, R.S., 1998. A comparison of rapid prototyping technologies. International Journal of Machine Tools andManufacture, 38, 1257-1287.
49. Quante, K., Ludwig, K. and Kern, M., 2008. Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology. Dental Materials, 24, 1311-1315.
50. Ryan, G.E., Pandit, A.S. and Apatsidis, D.P., 2008. Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique. Biomaterials, 29, 3625-3635.
51. Santos, E.C., Shiomi, M., Osakada, K. and Laoui, T., 2006. Rapid manufacturing of metal components by laser forming. International Journal of Machine Tools and Manufacture, 46, 1459-1468.
52. Schimdt, M., Pohle, D. and Rechtenwald, T., 2007. Selective laser sintering of PEEK. CIRP Annals: Manufacturing Technology, 56, 205-208.
53. Sercombe, T., Jones, N., Day, R. and Kop, A., 2008. Heat treatment of Ti-6Al-7Nb components produced by selective laser melting. Rapid Prototyping Journal, 14, 300-304.
54. Shiomi, M., Osakada, K., Nakamura, K., Yamashita, T. and Abe, F., 2004. Residual stress within metalic model made by selective laser melting. CIRP Annals: Manufacturing Technology, 53 (1), 195-198.
55. Singare, S., Lian, Q., Wang, W.P., Wang, J., Liu, Y., Li, D. and Lu, B., 2009. Rapid prototyping assisted surgery planning and custom implant design. Rapid Prototyping Journal, 15, 19-23.
56. Singare, S., Yaxiong, L., Dichen, L., Bingheng, L., Sanhu, H. and Gang, Li., 2006. Fabrication of customized maxilo-facial prosthesis using computer-aided design and rapid prototyping techniques. Rapid Prototyping Journal, 12, 206-213.
57. Stroud, I. and Xirouchakis, P.C., 2000. STL and extensions. Advances in Engineering Software, 31, 83-95.
58. Szilvasi-Nagy, M. and Matyasi, G., 2003. Analysis of STL Files. Mathematical and Computer Modelling, 38, 945-960.
59. Tay, F.E.H., Manna, M.A. and Liu, L.X., 2002. A CASD/CASM method for prosthetic socket fabrication using the FDM technology. Rapid Prototyping Journal, 8, 258-262.
60. Tolochko, N.K., Arshinov, M.K., Guzarov, A.V., Titov, V.I., Laoui, T. and Froyen, L., 2003. Mechanism of selective laser sintering and heat transfer in Ti powder. Rapid Prototyping Journal, 9, 314-326.
61. Tong, K., Lehtihet, A. and Joshi, S., 2004. Software compensation of rapid prototyping machine. Precision Engineering, 28, 280-292.
62. Ucar, Y., Akova, T., Akyil, M. and Brantley, W.A., 2009. Internal fit evaluation of crowns prepared using a new dental crown fabrication technique: Laser-sintered Co-Cr crowns. The Journal of Prosthetic Dentistry, 102, 254-259.
63. Vail, N.K., Swain, L.D., Fox, W.C., Aufdlemorte, T.B., Lee, G. and Barlow, J.W., 1999. Materials for biomedical application. Materials and Design, 20 (2-3), 123-132.
64. Vandenbroucke, B. and Kruth, J.P., 2007. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts. Rapid Prototyping Journal, 13, 196-203.
65. Withers, P.J. and Bhadeshia, H.K.D.H., 2001. Residual stress part 2-nature and origins. Materials Science and Technology, 17, 366-375.
66. Witkowski, S., Komine, F. and Gerds, T., 2006. Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques. The Journal of Prosthetic Dentistry, 96, 47-52.
67. Wohlers, T., 1995. Future potential of rapid prototyping and manufacturing around the world. Rapid Prototyping Journal, 1, 4-10.
68. Xiong, Z., Yan, Y., Zhang, R. and Wang, X., 2005. Organism manufacturing engineering based on rapid prototyping principles. Rapid Prototyping Journal, 11, 160-166.
69. Yan, Y., Wu, R., Zhang, R., Xiong, Z. and Lin, F., 2003. Biomaterial forming research using RP technology. Rapid Prototyping Journal, 9, 142-149.
70. Yang, Y., Huang, Y., and Wu, W., 2008. One-step shaping of NiTi biomaterial by selective laser melting. In: Lasers in material processing and manufacturing III proceedings of the international conference in Beijing, China, 12-14 November 2007. Bellingham, WA: SPIE, Vol. 6825.
71. Yeong, W.Y., Chua, C.K., Leong, K.F., Chandrasekaran, M. and Lee, M.W., 2006. Indirect fabrication of collagen scaffold based on inkjet printing technique. Rapid Prototyping Journal, 12, 229-237.
72. Zein, I., Hutmacher, D.W., Tan, K.C. and Teoh, S.H., 2002. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials, 23, 1169-1185.
73. Zhang, G., Tsou, Y. and Rosenberger, A.L., 2000. Reconstruction of the Homunculus skull using a combined scanning and stereolithography process. Rapid Prototyping Journal, 6, 267-275.