Fabrication of customised scaffolds using computer-aided design and rapid prototyping techniques

Rapid Prototyping Journal

Volumn 11, Issue 4, 2005, Pages 249-259

  Naing, M W ^a   Chua, C K ^a   Leong, K F ^a   Wang, Y ^a  

^a NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

Author keywords

Computer aided design; Mechanical properties of materials; Rapid prototypes

Indexed keywords

ALGORITHMS; COMPUTER AIDED DESIGN; LASERS; MEDICAL IMAGING; RAPID PROTOTYPING; SINTERING;

COMPUTER AIDED SYSTEM FOR TISSUE SCAFFOLDS (CASTS); MECHANICAL PROPERTIES OF MATERIALS; PORE NETWORKS; TISSUE ENGINEERING (TE);

SCAFFOLDS;

EID: 23744499612     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552540510612938     Document Type: Article

References (28)

1. Abu Bakar, M.S., Cheang, P. and Khor, K.A. (1999), "Thermal processing of hydroxyapatite reinforced polyetheretherketone composites", Journal of Materials Processing Technology, Vol. 89-90, pp. 462-6.
2. Agrawal, A.M. and Ray, R.B. (2001), "Biodegradable polymeric scaffolds for musculoskeletal tissue engineering", Journal of Biomedical Material Research, Vol. 55, pp. 141-50.
3. Barton, A.J., Sagers, R.D. and Pitt, W.J. (1996), "Bacterial adhesion to orthopedic implant polymers", Journal of Biomedical Materials Research, Vol. 30 No. 3, pp. 403-10.
4. Bhatia, S.N. and Chen, C.S. (1999), "Tissue engineering at the microscale", Biomedical Microdevices, Vol. 2 No. 2, pp. 131-44.
5. Bruder, S.P., Kraus, K.H., Goldberg, B.M. and Kardiyala, S. (1998), "Critical-sized canine segmental femoral defects are healed by autologous mesenchymal stem cell therapy", Transactions of the 11th Annual Meeting of The Orthopedic Research Society, p. 147.
6. Cheah, C.M., Chua, C.K., Leong, K.F., Cheong, C.H. and Naing, M.W. (2004), "An automatic algorithm for generating complex polyhedral scaffold structures for tissue engineering", Tissue Engineering, Vol. 10, pp. 595-609.
7. Chen, G., Ushida, T. and Tateishi, T. (2001), "Development of biodegradable porous scaffolds for tissue engineering", Materials Science and Engineering C, Vol. 17, pp. 63-9.
8. Chua, C.K., Leong, K.F., Cheah, C.M. and Chua, S.W. (2003), "Development of a tissue engineering scaffold structure library for rapid prototyping. Part 1: investigation and classification", International Journal of Advanced Manufacturing Technology, Vol. 21, pp. 291-301.
9. Chua, C.K., Leong, K.F., Cheah, C.M. and Chua, S.W. (2003), "Development of a tissue engineering scaffold structure library for rapid prototyping. Part 2: parametric library and assembly program", International Journal of Advanced Manufacturing Technology, Vol. 21, pp. 302-12.
10. Chua, C.K., Leong, K.F. and Lim, C.S. (2003), Rapid Prototyping: Principles and Applications in Manufacturing, World Scientific, Singapore.
11. Gibson, L.J. and Ashby, M.F. (1997), Cellular Solids: Structure and Properties, Cambridge University Press, Cambridge.
12. Hollister, S.J., Levy, R.A., Chu, T.M., Halloran, J.W. and Feinberg, S.E. (2000), "An image-based approach for designing and manufacturing craniofacial scaffolds", International Journal of Oral and Maxillofacial Surgery, Vol. 29, pp. 67-71.
13. Hutmacher, D.W. (2000), "Scaffolds in tissue engineering bone and cartilage", Biomaterials, Vol. 21, pp. 2529-43.
14. Hutmacher, D.W., Schantz, T., Zein, I., Ng, K.W., Teoh, S.H. and Tan, K.C. (2001), "Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling", Journal of Biomedical Materials Research, Vol. 55, pp. 203-16.
15. Lam, C.X.F., Mo, X.M., Teoh, S.H. and Hutmacher, D.W. (2002), "Scaffold development using 3D printing with a starch-based polymer", Materials Science and Engineering C, Vol. 20, pp. 49-56.
16. Leong, K.F., Cheah, C.M. and Chua, C.K. (2002), "Building scaffolds with designed internal architectures for tissue engineering using rapid prototyping", Tissue Engineering, Vol. 8 No. 6, p. 1113.
17. Leong, K.F., Cheah, C.M. and Chua, C.K. (2003), "Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs", Biomaterials, Vol. 24, pp. 2363-78.
18. Mikos, A.G. and Temenoff, J.S. (2000), "Formation of highly porous biodegradable scaffolds for tissue engineering", Electronic Journal of Biotechnology, Vol. 3 No. 2, pp. 114-9.
19. Mikos, A.G., Sarakinos, G. and Lyman, M.D. (1993), " Prevascularisation of porous biodegradable polymer", Biotechnology and Bioengineering, Vol. 42, pp. 716-23.
20. Naing, M.W., Chua, C.K. and Leong, K.F. (2003), "Novel computer-aided fabrication of cellular scaffolds for tissue engineering", Proceedings of International Conference for Epithelial Tissue Engineering 2003, Singapore.
21. Nelson, J.C. (1993), "Selective laser sintering: a definition of the process and an empirical sintering model", PhD dissertation, University of Texas, Austin, TX.
22. Ratner, B.D. (2003), "Novel polymers for esophageal tissue engineering", Proceedings of International Conference for Epithelial Tissue Engineering, Singapore.
23. Rimell, J.T. and Marquis, P.M. (2000), "Selective laser sintering of ultra high molecular weight polyethylene for clinical applications", Journal of Biomedical Material Research, Vol. 53 No. 4, pp. 414-20.
24. Taboas, J.M., Maddox, R.D., Krebsbach, P.H. and Hollister, S.J. (2003), "Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds", Biomaterials, Vol. 24, pp. 181-94.
25. Tan, K.H., Chua, C.K. and Leong, K.F. et al. (2003), "Scaffold development using selective laser sintering of polyetheretherketone- hydroxyapatite biocomposite blends", Biomaterials, Vol. 24, pp. 3115-23.
26. Too, M.H., Leong, K.F., Chua, C.K., Cheah, C.M. and Ho, S.L. (2001), "Feasibility of tissue engineering scaffolds fabrication using fused deposition modelling", Proceedings of the Seventh Australian and New Zealand Conference on Intelligent Information Systems (ANZIIS), pp. 433-8.
27. Too, M.H., Leong, K.F. and Chua, C.K. et al. (2002), "Investigation of 3D non-random porous structures by fused deposition modeling", International Journal of Advanced Manufacturing Technology, Vol. 19, pp. 217-23.
28. Van Tienen, T.G., Heijkants, R. and Buma, P. (2002), "Tissue ingrowth and degradation of two biodegradable porous polymers with different porosities and pore sizes", Biomaterials, Vol. 23, pp. 1731-8.