Design and fabrication of CAP scaffolds by indirect solid free form fabrication

Rapid Prototyping Journal

Volumn 11, Issue 5, 2005, Pages 312-318

  Li, Xiang ^a   Li, Dichen ^a   Lu, Bingheng ^a   Tang, Yiping ^a   Wang, Lin ^b   Wang, Zhen ^b  

^a XI'AN JIAOTONG UNIVERSITY   (China)

^b FOURTH MILITARY MEDICAL UNIVERSITY   (China)

Author keywords

Architecture; Bones; Rapid prototypes; Scaffolds

Indexed keywords

ARCHITECTURE; BONE; DESIGN; FABRICATION; LITHOGRAPHY; RAPID PROTOTYPING; TISSUE;

CALCIUM PHOSPHATE; CAP SCAFFOLDS; SELF HARDENING; SOLID FREE FORM FABRICATION;

SCAFFOLDS;

EID: 27644515701     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552540510623639     Document Type: Review

References (37)

1. Ang, T.H., Sultana, F.S.A., Hutmacher, D.W., Wong, Y.S., Fuh, J.Y.H., Mo, X.M., Loh, H.T., Burdet, E. and Teoh, S.H. (2002), "Fabrication of 3D chitosan-hydroxyapatite scaffolds using a robotic dispensing system", Mater. Sci. Eng. C, Vol. 20, pp. 35-42.
2. Barralet, J.E., Grover, L., Gaunt, T., Wright, A.J. and Gibson, I.R. (2002), "Preparation of macroporous calcium phosphate cement tissue engineering scaffold", Biomater., Vol. 23, pp. 3063-72.
3. Brown, G.D., Mealey, B.L., Nummikoski, P.V., Bifano, S.L. and Waldrop, T.C. (1998), "Hydroxyapatite cement implant for regeneration of periodontal osseous defects in humans", J. Periodontol., Vol. 69, pp. 146-57.
4. Chang, B.S., Lee, C.K., Hong, K.S., Youn, H.J., Ryu, H.S., Chung, S.S. and Park, K.W. (2000), "Osteoconduction at porous hydroxyapatite with various pore configurations", Biomater., Vol. 21, pp. 1291-8.
5. Chen, C.S., Mrksich, M., Huang, S., Whitesides, G.M. and Ingber, D.E. (1997), "Geometric control of cell life and death", Sci., Vol. 276, pp. 1425-8.
6. Cherng, A.M., Chow, L.C. and Takagi, S. (2001), "In vitro evaluation of a calcium phosphate cement root canal filler/sealer", J. Endodont., Vol. 27, pp. 613-5.
7. Chow, L.C. and Takagi, S. (2001), "Formation of macropores in calcium phosphate cement implants", J. Mater. Sci.: Mater. Med., Vol. 12, pp. 135-9.
8. Chu, T.M.G., Halloran, J.W., Hollister, S.J. and Feinberg, S.E. (2001), "Hydroxyapatite implants with designed internal architecture", J. Mater. Sci.: Mater. Med., Vol. 12, pp. 471-8.
9. Cooke, M.N., Fisher, J.P., Dean, D., Rimnac, C. and Mikos, A.G. (2002), "Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth", J. Biomed. Mater. Res. Part B: Appl. Biomater., Vol. 64B, pp. 65-9.
10. Costantino, P.D. and Friedman, C.D. (1994), "Synthetic bone graft substitutes", Otolaryngol. Clin. North Am., Vol. 27, pp. 1037-74.
11. del Real, R.P., Wolke, J.G.C., Vallet-Regi, M. and Jansen, J.A. (2002), "A new method to produce macropores in calcium phosphate cements", Biomater., Vol. 23, pp. 3673-80.
12. Ebaretonbofa, E. and Evans, J.R.G. (2002), "High porosity hydroxyapatite foam scaffolds for bone substitute", J. Porous Mater., Vol. 9, pp. 257-63.
13. Friedman, C.D., Costantino, P.D., Takagi, S. and Chow, L.C. (1998), "Bone-Source™ hydroxyapatite cement: a novel biomaterial for craniofacial skeletal tissue engineering and reconstruction", J. Biomed. Mater. Res. (Appl. Biomater.), Vol. 43, pp. 428-32.
14. Ginebra, M.P., Fernandez, E., De Maeyer, E.A.P., Verbeeck, R.M.H., Boltong, M.G., Ginebra, J., Driessens, F.C.M. and Planell, J.A. (1997), "Setting reaction and hardening of an apatite calcium phosphate cement", J. Dent. Res., Vol. 76, pp. 905-12.
15. Hutmacher, D.W. (2001), "Scaffold design and fabrication technologies for engineering tissues - state of the art and future perspectives", J. Biomater. Sci. Polymer Edn., Vol. 12, pp. 107-24.
16. Hutmacher, D.W., Sittinger, M. and Risbud, M.V. (2004), "Scaffold-based tissue engineering: rational for computer-aided design and solid free-form fabrication systems", Trends Biotechnol., Vol. 22 No. 7, pp. 354-62.
17. Kalita, S.J., Bose, S., Hosick, H.L. and Bandyopadhyay, A. (2003), "Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling", Mater. Sci. Eng. C, Vol. 23, pp. 611-20.
18. Lam, C.X.F., Mo, X.M., Teoh, S.H. and Hutmacher, D.W. (2002), "Scaffold development using 3D printing with a starch-based polymer", Mater. Sci. Eng. C, Vol. 20, pp. 49-56.
19. Lee, M., Dunn, J.C.Y. and Wu, B.M. (2005), "Scaffold fabrication by indirect three-dimensional printing", Biomater., Vol. 26, pp. 4281-9.
20. Leong, K.F., Cheah, C.M. and Chua, C.K. (2003), "Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs", Biomater., Vol. 24, pp. 2363-78.
21. Liu, X.H. and Ma, P.X. (2004), "Polymeric scaffolds for bone tissue engineering", Ann. Biomed. Eng., Vol. 32, pp. 477-86.
22. Liu, C.S., Shao, H.F., Chen, F.Y. and Zheng, H.Y. (2003), "Effects of the granularity of raw materials on the hydration and hardening process of calcium phosphate cement", Biomater., Vol. 24, pp. 4103-13.
23. Ma, P.X. (2004), "Scaffolds for tissue fabrication", Mater. Today, Vol. 7 No. 5, pp. 30-40.
24. Marra, K.G., Szem, J.W., Kumta, P.N., Dimilla, P.A. and Weiss, L.E. (1999), "In vitro analysis of biodegradable polymer blend/hydroxyapatite composites for bone tissue engineering", J. Biomed. Mater. Res., Vol. 47, pp. 324-35.
25. O'Brien, F.J., Harley, B.A., Yannas, I.V. and Gibson, L.J. (2005), "The effect of pore size on cell adhesion in collagen-GAG scaffolds", Biomater., Vol. 26, pp. 433-41.
26. Sachlos, E., Reis, N., Ainsley, C., Derby, B. and Czernuszka, J.T. (2003), "Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication", Biomater., Vol. 24, pp. 1487-97.
27. Shindo, M.L., Costantino, P.D., Friedman, C.D. and Chow, L.C. (1993), "Facial skeletal augmentation using hydroxyapatite cement", Arch. Otolaryngol. Head Neck Surg., Vol. 119, pp. 185-90.
28. Singare, S., Dichen, L., Bingheng, L., Zhenyu, G. and Yaxiong, L. (2005), "Customized design and manufacturing of chin implant based on rapid prototyping", Rapid Prototyping J., Vol. 11 No. 2, pp. 113-8.
29. Taboas, J.M., Maddox, R.D., Krebsbach, P.H. and Hollister, S.J. (2003), "Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds", Biomater., Vol. 24, pp. 181-94.
30. Takagi, S., Chow, L.C. and Ishikawa, K. (1998), "Formation of hydroxyapatite in new calcium phosphate cements", Biomater., Vol. 19, pp. 1593-9.
31. Tamai, N., Myoui, A., Tomita, T., Nakase, T., Tanaka, J. and Ochi, T. (2002), "Novel hydroxyapatite ceramics with an interconnective porous struture exhibit superior osteoconduction in vivo", J. Biomed. Mater. Res., Vol. 59 No. 1, pp. 110-7.
32. Tsang, V.L. and Bhatia, S.N. (2004), "Three-dimensional tissue fabrication", Adv. Drug Delivery Rev., Vol. 56, pp. 1635-47.
33. Van Tienen, T.G., Heijkants, R.G.J.C., Buma, P., de Groot, J.H., Pennings, A.J. and Veth, R.P.H. (2002), "Tissue ingrowth and degradation of two biodegradable porous polymers with different porosities and pore sizes", Biomater., Vol. 23, pp. 1731-8.
34. Wilson, C.E., de Bruijn, J.D., van Blitterswijk, C.A., Verbout, A.J. and Dhert, W.J. (2004), "Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro-architecture by rapid prototyping for bone-tissue-engineering research", J. Biomed. Mater. Res., Vol. 68A, pp. 123-32.
35. Xu, H.H.K. and Quinn, J.B. (2002), "Calcium phosphate cement containing resorbable fibers for short-term reinforcement and macroporosity", Biomaterials, Vol. 23, pp. 193-202.
36. Zeltinger, J., Sherwood, J.K., Graham, D.A., Mueller, R. and Griffith, L.G. (2001), "Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition", Tissue Eng., Vol. 7 No. 5, pp. 557-72.
37. Zhang, Z., Wang, Z., Liu, S. and Kodama, M. (2004), "Pore size, tissue ingrowth, and endotheliatization of small-diameter microporous polyurethane vascular prostheses", Biomater., Vol. 25, pp. 177-87.