Predictive zero-dimensional combustion model for di diesel engine feed-forward control

Energy Conversion and Management

Volumn 52, Issue 10, 2011, Pages 3159-3175

  Catania, Andrea Emilio ^a   Finesso, Roberto ^a   Spessa, Ezio ^a  

^a POLITECNICO DI TORINO   (Italy)

Author keywords

Diesel combustion; Modeling; Predictive control

Indexed keywords

CALIBRATION; COMBUSTION CHAMBERS; COMPRESSION RATIO (MACHINERY); ENGINES; EXHAUST GAS RECIRCULATION; FUELS; IGNITION; MODELS; NOZZLES;

ACCURATE CALCULATIONS; DIESEL COMBUSTION; HEAT RELEASE RATE (HRR); INDICATED MEAN EFFECTIVE PRESSURE; PEAK-FIRING PRESSURES; PREDICTIVE CONTROL; PREMIXED CHARGE COMPRESSION IGNITION; STEADY-STATE OPERATING CONDITIONS;

DIESEL ENGINES;

EID: 79957540291     PISSN: 01968904     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.enconman.2011.05.003     Document Type: Article

References (59)

1. Johnson TV. Review of diesel emissions and control. SAE Int J Fuels Lubr 2010;3(August):16-29.
2. Yao M, Zheng Z, Liu H. Progress and recent trends in homogeneous charge compression ignition (HCCI) engines. Progr Energy Combust Sci 2009;35: 398-437.
3. Desantes JM, Benajes J, Molina S, González CA. The modification of the fuel injection rate in heavy-duty diesel engines: Part 2: effects on combustion. Appl Therm Eng 2004;24(17-18):2715-26.
4. Payri R, Salvador FJ, Gimeno J, De la Morena J. Effects of nozzle geometry on direct injection diesel engine combustion process. Appl Therm Eng 2009;29(10):2051-60.
5. Payri R, Salvador FJ, Gimeno J, De la Morena J. Influence of injector technology on injection and combustion development-Part 1: hydraulic characterization. Appl Energy 2011;88(4):1068-74.
6. Payri R, Salvador FJ, Gimeno J, De la Morena J. Influence of injector technology on injection and combustion development-Part 2: combustion analysis. Appl Energy 2011;88(4):1130-9.
7. Desantes JM, Benajes J, Molina S, González CA. The modification of the fuel injection rate in heavy-duty diesel engines. Part 1: Effects on engine performance and emissions. Appl Therm Eng 2004;24(17-18):2701-14.
8. Asad U, Zheng M, Han X, Reader GT, Wang M. Fuel injection strategies to improve emissions and efficiency of high compression ratio diesel engines. SAE Int J Eng 2009;1(April):1220-33.
9. Mendez S, Thirouard B. Using multiple injection strategies in diesel combustion: potential to improve emissions, noise and fuel economy tradeoff in low CR engines. SAE Int J Fuels Lubr 2009;1(April):662-74.
10. Hountalas DT, Lamaris VT, Pariotis EG, Ofner H. Parametric study based on a phenomenological model to investigate the effect of post fuel injection on HDDI diesel engine performance and emissions-model validation using experimental data. SAE Paper 2008-01-0641.
11. Fischer S, Stein J-O. Investigation on the effect of very high fuel injection pressure on soot-NOx emissions at high load in a passenger car diesel engine. SAE Int J Eng 2009;2(October):1737-48.
12. Abdullah NR, Mamat R, Rounce P, Tsolakis A, Wyszynski ML, Xu HM. Effect of injection pressure with split injection in a V6 diesel engine. SAE Paper 2009- 24-0049.
13. Hillion M, Buhlbuck H, Chauvin J, Petit N. Combustion control of diesel engines using injection timing. SAE Paper 2009-01-0367.
14. Dober G, Tullis S, Greeves G, Milovanovic N, Hardy M, Zuelch S. The impact of injection strategies on emissions reduction and power output of future diesel engines. SAE Paper 2008-01-0941.
15. Torregrosa AJ, Olmeda P, Martín J, Degraeuwe B. Experiments on the influence of inlet charge and coolant temperature on performance and emissions of a DI diesel engine. Experimen Therm Fluid Sci 2006;30(7):633-41. (Pubitemid 44062278)
16. Stoffels H, Quiring S, Pingen B. Analysis of transient operation of turbo charged engines. SAE Int J Eng 2010;3(December):438-47.
17. Arnold S. Single sequential turbocharger: a new boosting concept for ultra-low emission diesel engines. SAE Int J Eng 2009;1(April):232-9.
18. Payri F, Broatch A, Salavert JM, Martín J. Investigation of diesel combustion using multiple injection strategies for idling after cold start of passenger-car engines. Experimen Therm Fluid Sci 2010;34(7):857-65.
19. Song J, Song C, Tao Y, Lv G, Dong S. Diesel soot oxidation during the late previous termcombustiont term phase. Combust Flame 2011;158(3): 446-51.
20. Zhang H, Wang J. Combustion characteristics of diesel engine operated with diesel and burning oil of biomass. Renew Energy 2006;31(7):1025-32. (Pubitemid 43113257)
21. Arrègle J, Pastor JV, López JJ, Garcí A. Insights on postinjection-associated soot emissions in direct injection diesel engines. Combust Flame 2008;154(3):448-61.
22. Idicheria CA, Pickett LM. Effect of EGR on diesel premixed-burn equivalence ratio. Proc Combust Inst 2007;31(2):2931-8. (Pubitemid 47424320)
23. Prasad BVVSU, Sharma CS, Anand TNC, Ravikrishna RV. High swirl-inducing piston bowls in small diesel engines for emission reduction. Appl Energy 2011;88(7):2355-67.
24. Catania AE, d'Ambrosio S, Finesso R, Spessa Ezio. Effects of rail pressure, pilot scheduling and EGR rate on combustion and emissions in conventional and PCCI diesel engines. SAE Int J Eng 2010;3(August):773-8.
25. Benajes J, Molina S, Martín J, Novella R. Effect of advancing the closing angle of the intake valves on diffusion-controlled combustion in a HD diesel engine. Appl Therm Eng 2009;29(10):1947-54.
26. Shaver GM, Roelle MJ, Gerdes JC. Modeling cycle-to-cycle dynamics and mode transition in HCCI engines with variable valve actuation. Contr Eng Pract 2006;14(3):213-22. (Pubitemid 43012930)
27. Krüger U, Edwards S, Pantow E, Lutz R, Dreisbach R, Glensvig M. High performance cooling and EGR systems as a contribution to meeting future emission standards. SAE Int J Eng 2009;1(April):756-69.
28. Boye M, Döring M, Van der Staay F, Raposo J, Jucker C, Morales M, et al. Innovation trends in the field of internal combustion engines. SAE Int J Eng 2009;2(October):1786-92.
29. Isermann R, Müller N. Design of computer controlled combustion engines. Mechatronics 2003;13:1067-89.
30. Kalogirou SA. Artificial intelligence for the modeling and control of combustion processes: a review. Progress Energy Combust Sci 2003;29:515-66.
31. Rumelhart DE, Hinton GE, Williams RJ. Learning internal representations by error propagation. Parallel distributed processing: explorations in the microstructure of cognition, vol. 1. Cambridge, MA: MIT Press; 1986 [chapter 8].
32. Thompson GJ, Atkinson CM, Clark NN, Long TW, Hanzevack E. Neural network modeling of the emissions and performance of a heavy-duty diesel engine. Proc Inst Mech Eng Part D J Automob Eng 2001;214(D2):111-26.
33. Muller R, Hemberger HH, Baier K. Engine control using neural networks: a new method in engine management systems. Mechanica 1997;32(5):423-30. (Pubitemid 127506366)
34. Du H, Zhang L, Shi X. Reconstructing cylinder pressure from vibration signals based on radial basis function networks. Proc Inst Mech Eng Part D: J Automob Eng 2001;215(D6):761-7. (Pubitemid 34459533)
35. Yang ZZ, Wei JQ, Fang ZY, Li JD. An investigation of optimum control of ignition timing and injection system in an in-cylinder injection type hydrogen fueled engine. Int J Hydro Energy 2002;27(2):213-7.
36. Heywood JB. Internal combustion engine fundamentals. McGraw-Hill International Editions; 1988.
37. Ponti F, Corti E, Serra G, De Cesare M. Common rail multi-jet diesel engine combustion model development for control purposes. SAE Paper No. 2007-01- 0383; 2007.
38. Chmela FG, Orthaber GC. Rate of heat release prediction for direct injection diesel engines based on purely mixing controlled combustion. SAE Paper No. 1999-01-0186; 1999.
39. Barba C, Burkhardt C, Boulouchos K, Bargende M. An empirical model for precalculating the combustion rate of the common rail diesel engine for passenger cars. MTZ Motortechnische Zeitschirft 1999;60.
40. Payri F, Benajes J, Galindo J, Serrano Jr. Modelling of turbocharged diesel engines in transient operation Part 2: wave action models for calculating the transient operation in a high speed direct injection engine. IMechE 2002;216(Part D).
41. García MT, Aguilar FJJ-E, Lencero TS, Villanueva JAB. A new heat release rate (HRR) law for homogeneous charge compression ignition (HCCI) combustion mode. Appl Therm Eng 2009;29.
42. Dec JE. A conceptual model of DI Diesel combustion based on laser-sheet imaging. SAE Paper 970873; 1997.
43. Hiroyasu H, Kadota T, Arai M. Development and use of a spray combustion modeling to predict diesel engine efficiency and pollutant emissions. Bullet JSME 1983;26(214).
44. Arrègle J, García JM, López JJ, Fenollosa C. Development of a zero-dimensional diesel combustion model. Part 1: Analysis of the quasi-steady diffusion combustion phase. Appl Therm Eng 2003;23.
45. Arrègle J, López JJ, García JM, Fenollosa C. Development of a zero-dimensional Diesel combustion model. Part 2: Analysis of the transient initial and final diffusion combustion phases. Appl Therm Eng 2003;23.
46. Egnell R. A simple approach to studying the relation between fuel rate, Heat release rate and no formation in diesel engines. SAE Paper No. 1999-01-3548; 1999.
47. Ryan TW, Callahan TJ. Homogeneous charge compression ignition of diesel fuels. SAE Paper 961160; 1996.
48. Ericson C, Westerberg B, Andersson M, Egnell R. Modelling diesel engine combustion and NOx formation for model based control and simulation of engine and exhaust aftertreatment systems. SAE Paper No. 2006-01-0687; 2006.
49. Catania AE, Ferrari A, Spessa E. Numerical-experimental study and solutions to reduce the dwell time threshold for fusion-free consecutive injections in a multijet solenoid-type C.R. system, ASME ICES 06 best paper award. ASME Trans J Eng Gas Turbine Power 2008;130:7.
50. Baratta M, Catania AE, Ferrari A, Finesso R, Spessa E. Premixed-diffusive multizone model for combustion diagnostics in conventional and PCCI diesel engines. ASME Trans J Eng Gas Turbine Power 2011;133:10.
51. Catania AE, d'Ambrosio S, Finesso R, Spessa E, Cipolla G, Vassallo A. Combustion system optimization of a low compression-ratio PCCI diesel engine for light-duty application. SAE Int J Eng 2009:1314-26.
52. Cipolla G, Vassallo A, Catania AE, Spessa E, Stan C, Drischmann L. Combined application of CFD modeling and pressure-based combustion diagnostics for the development of a low compression ratio high-performance diesel engine. SAE Trans J Eng 2008:1521-39.
53. Egnell R. The influence of EGR on heat release rate and NO formation in a DI diesel engine. SAE Paper No. 2000-01-1807; 2000.
54. Egnell R. Combustion diagnostics by means of multizone heat release analysis and NO calculation. SAE Paper No. 981424; 1998.
55. Sastry GVJ, Chandra H. A three-zone heat release model for DI diesel engines. SAE Paper No. 940671; 1994.
56. Catania AE, D'Ambrosio S, Finesso R, Spessa E. Effects of rail pressure, pilot scheduling and EGR rate on combustion and emissions in conventional and PCCI diesel engines. SAE Int J Eng 2001;3(August):773-87. ISSN: 1946-3936.
57. Catania AE, d'Ambrosio S, Ferrari A, Finesso R, Spessa E, Avolio G, et al. Experimental analysis of combustion processes and emissions in a 2.0 L multicylinder diesel engine featuring a new generation piezo-driven injector. In: 9th International conference on engine and vehicles, SAE Paper No. 2009-24-0040. Capri (NA), Italy; September 13-18, 2009.
58. Catania AE, Spessa E, Finesso R, Landsmann G, Catanese A. Combustion prediction by a low-throughput model in modern diesel engines. SAE Paper No 2011-01-1410; 2011.
59. ISO/IEC GUIDE 98-3:2008(E). Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995).