Progress and recent trends in homogeneous charge compression ignition (HCCI) engines

Progress in Energy and Combustion Science

Volumn 35, Issue 5, 2009, Pages 398-437

  Yao, Mingfa ^a   Zheng, Zhaolei ^a   Liu, Haifeng ^a  

^a TIANJIN UNIVERSITY   (China)

Author keywords

Diesel fuelled HCCI engine; Gasoline fuelled HCCI engine; Homogeneous charge compression ignition (HCCI); Low temperature combustion (LTC); Numerical simulation; Optical diagnostics

Indexed keywords

DIESEL-FUELLED HCCI ENGINE; HOMOGENEOUS CHARGE COMPRESSION IGNITION (HCCI); LOW TEMPERATURE COMBUSTION (LTC); NUMERICAL SIMULATION; OPTICAL DIAGNOSTICS;

CARBON MONOXIDE; COMPUTER SIMULATION; DIESEL ENGINES; ENGINES; GASOLINE; HYDROCARBONS; MATHEMATICAL MODELS; NITRIC OXIDE; NITROGEN OXIDES; PARTICULATE EMISSIONS; PROCESS CONTROL; SMOKE; THERMOCHEMISTRY;

IGNITION;

EID: 67949092767     PISSN: 03601285     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pecs.2009.05.001     Document Type: Review

References (273)

1. Furutani M., Ohta Y., and Komatsu K. Onset behavior of low-temperature flames caused by piston compression. JSAE Rev 14 2 (1993) 12-18
2. Pucher GR, Gardiner DP, Bardon MF, Battista V. Alternative combustion systems for piston engines involving homogeneous charge compression ignition concepts - a review of studies using methanol, gasoline and diesel fuel. SAE paper 962063; 1996.
3. Green RM, Cernansky NP, Pitz WJ, Westbrook CK. The role of low temperature chemistry in the auto-ignition on n-butane. SAE paper 872108; 1987.
4. Addargarla S, Henig Y, Wilk RD, Miller DL, Cernansky NP. Effect of fuel-air mixture stressing on pre-ignition heat release in a knock research engine. SAE paper 892082; 1989.
5. Iida N. Combustion analysis of methanol-fueled active thermo-atmosphere combustion (ATAC) engine using a spectroscopic observation. SAE paper 940684; 1994.
6. Aoyama T, Hattori Y, Mizuta J, Sato Y. An experimental study on premixed-charge compression ignition gasoline engine. SAE paper 960081; 1996.
7. Onishi S, Jo SH, Shoda K, Jo PD, Kato S. Active thermo-atmosphere combustion (ATAC) - a new combustion process for internal combustion engines. SAE paper 790501; 1979.
8. Noguchi M, Tanaka T, Takeuchi Y. A study on gasoline engine combustion by observation of intermediate reactive products during combustion. SAE paper 790840; 1979.
9. Najt PM, Foster DE. Compression ignited homogeneous charge combustion. SAE paper 830264; 1983.
10. Thring RH. Homogeneous - charge compression ignition (HCCI) engines. SAE paper 892068; 1989.
11. Ryan III TW, Callahan TJ. Homogeneous charge compression ignition of diesel fuel. SAE paper 961160; 1996.
12. Gray III AW, Ryan III TW. Homogeneous charge compression ignition (HCCI) of diesel fuel. SAE paper 971676; 1997.
13. Stanglmaier RH, Roberts CE. Homogeneous charge compression ignition (HCCI): benefits, compromise, and future engine applications. SAE paper 1999;01-3682; 1999.
14. Dec JE.A computational study of the effects of low fuel loading. SAE paper 2002;01-1309; 2002.
15. Eng JA. Characterization of pressure waves in HCCI combustion. SAE paper 2002;01-2859; 2002.
16. Stanglmaier RH, Li J, Matthews RD. The effect of in-cylinder wall wetting location on the HC emissions from SI engines. SAE paper 1999;01-0502; 1999.
17. Harada A, Shimazaki N, Sator, S, Miyamoto T, Akagawa H, Tsujimura K. The effects of mixture formation on premixed lean diesel combustion. SAE paper 980533; 1998.
18. Ranzi E., Faravelli T., Sogaro A., Gaffuri P., and Pennati G. A wide range modeling study of propane and n-butane oxidation. Combust Sci Technol 100 1 (1994) 299-330
19. Frouzakis G.E., and Boulouchos K. Analysis and reduction of the CH4 - air mechanism at lean conditions. Combust Sci Technol 159 1 (2000) 281-303
20. Dagaut P., Cathonnet M., and Boettner J.C. Ethylene pyrolysis and oxidation: a kinetic modeling study. Int J Chemi Kinetics 22 6 (1990) 641-664
21. Curran H.J., Gaffuri P., Pitz W.J., and Westbrook C.K. A comprehensive modeling study of n-heptane oxidation. Combust Flame 114 1-2 (1998) 149-177
22. Curran H.J., Gaffuri P., Pitz W.J., and Westbrook C.K. A comprehensive modeling study of iso-octane oxidation. Combust Flame 129 3 (2002) 253-280
23. Jun D, Ishii K, Iida N. Combustion analysis of natural gas in four stroke HCCI engine using experiment and elementary reactions calculation. SAE paper 2003-01-1089; 2003.
24. Yamasaki Y, Iida N. Numerical analysis of auto ignition and combustion of n-butane and air mixture in the homogeneous charge compression ignition engine by using elementary reactions. SAE paper 2003-01-1090; 2003.
25. Kusaka J., Yamamoto T., and Daisho Y. Simulating the homogeneous charge compression ignition process using a detailed kinetics model for n-heptane mixture. Int J Engine Res 1 3 (2000) 281-289
26. Yao M.F., and Zheng Z.L. Numerical study on the chemical reaction kinetics of n-heptane for HCCI combustion process. Fuel 85 17-18 (2006) 2605-2615
27. Naik CV, Pitz WJ, Westbrook CK, Sjöberg M, Dec JE, Orme J, et-al Detailed chemical kinetic modeling of surrogate fuels for gasoline and application to an HCCI engine. SAE paper 2005-01-3741; 2005.
28. Andrae J.C.G., Björnbom P., Cracknell R.F., and Kalghatgi G.T. Auto-ignition of toluene reference fuels at high pressures modeled with detailed chemical kinetics. Combust Flame 149 1-2 (2007) 2-24
29. Fiveland SB, Assanis DN. Development of a two-zone HCCI combustion model accounting for boundary layer effects. SAE paper 2001-01-1028; 2001.
30. Fiveland SB, Assanis DN. Development and validation of a quasi-dimensional model for HCCI engine performance and emissions studies under turbocharged conditions. SAE paper 2002-01-1757; 2002.
31. Komninos NP, Hountalas DT, Kouremenos DA. Description of in-cylinder combustion processes in HCCI engines using a multi-zone model. SAE paper 2005-01-0171; 2005.
32. Kongsereeparp P, Checkel MD. Investigation of reformed fuel blending effects in HCCI engines using a multi-zone model. SAE paper 2007-01-0205; 2007.
33. Fiveland SB, Assanis DN. A four-stroke homogeneous charge compression ignition engine simulation for combustion and performance studies. SAE paper 2000-01-0332; 2000.
34. Fiveland SB, Agama R, Christensen M, Johansson B, Hiltner J, Mauss F, et-al Experimental and simulated results detailing the sensitivity of natural gas HCCI engines to fuel composition. SAE 2001-01-3609; 2001.
35. Lutz AE; Kee JR, Miller JA. SENKIN: a Fortran program for predicting homogeneous gas phase chemical kinetics with sensitivity analysis. Sandia Repoet SAND 87-8248, UC-4; 1988.
36. Xu HM, Fu HY, Williams H, Shilling I. Modelling study of combustion and gas exchange in a HCCI (CAI) engine. SAE paper 2002-01-0114; 2002.
37. Xu HM, Williams A, Fu HY, Wallace S, Richardson S, Richardson M. Operating characteristics of a homogeneous charge compression ignition engine with cam profile switching-simulation study. SAE paper 2003-01-1859; 2003.
38. Ogink R, Applications and results of a user-defined, detailed-chemistry HCCI combustion model in the AVL BOOST cycle simulation code, International AVL User Meeting 2003, 14-15 Graz, Austria.
39. Milovanovic N, Dowden R, Chen R, Turner JWG. Influence of the variable valve timing strategy on the control of a homogeneous charge compression (HCCI) engine. SAE paper 2004-01-1899; 2004.
40. Ogink R, Golovitchev V. Gasoline HCCI modeling: an engine cycle simulation code with a multi-zone combustion model. SAE paper 2002-01-1745; 2002.
41. Narayanaswamy K, Rutland CJ. Cycle simulation diesel HCCI modeling studies and control. SAE paper 2004-01-2997; 2004.
42. Aceves SM, Flowers DL, Westbrook CK, Smith JR, Pitz WJ, Dibble RW, et-al A multi-zone model for prediction of HCCI combustion and emissions. SAE paper 2000-01-0327; 2000.
43. Aceves SM, Flowers DL, Martinez-Frias J, Smith JR, Westbrook CK, Pitz WJ, et-al A sequential fluid-mechanic chemical-kinetic model of propane HCCI combustion. SAE paper 2001-01-1027; 2001.
44. Aceves SM, Martinez-Frias J, Flowers DL, Smith JR, Dibble RW, Wright JF, et-al A decoupled model of detailed fluid mechanism followed by detailed chemical kinetics for prediction of iso-octane HCCI combustion. SAE paper 2001-01-3612; 2001.
45. http://www.lanl.gov/orgs/t/t3/codes/kiva.shtml.
46. Flowers D.L., Aceves S.M., Martinez-Frias J., and Dibble R.W. Prediction of carbon monoxide and hydrocarbon emissions in isooctane HCCI engine combustion using multi-zone simulations. Proc Combust Inst 29 1 (2002) 687-694
47. Aceves SM, Flowers DL, Westbrook CK, Smith JR, Pitz W.J. Cylinder-geometry effect on HCCI combustion by multi-zone analysis. SAE paper 2002-01-2869; 2002.
48. Babajimopoulos A, Assanis DN, Fiveland SB. An approach for modeling the effects of gas exchange processes on HCCI combustion and its application in evaluating variable valve timing control strategies. SAE paper 2002-01-2829; 2002.
49. Flowers DL, Aceves SM, Martinez-Frias J, Hessel R, Dibble RW. Effect of mixing on hydrocarbon and carbon monoxide emissions prediction for isooctane HCCI engine combustion using a multi-zone detailed kinetics solver. SAE paper 2003-01-1821; 2003.
50. Babajimopoulos A, Lavoie GA, Assanis DN. Modeling HCCI combustion with high levels of residual gas fraction - a comparison of two VVA strategies. SAE paper 2003-01-3220; 2003.
51. Aceves SM, Flowers DL, Martinez-Frias J, Martinez-Frias J Dec JE, Sjöberg M, et-al Spatial analysis of emissions sources for HCCI combustion at low loads using a multi-zone model. SAE paper 2004-01-1910; 2004.
52. Aceves SM, Flowers DL, Martinez-Frias J, Espinosa-Losa F, Christensen M, Johansson B, et-al Analysis of the effect of geometry-generated turbulence on HCCI combustion by multi-zone modeling. SAE paper 2005-01-2134; 2005.
53. Agarwal A, Assanis DN. Modeling the effect of natural gas composition on ignition delay under compression ignition conditions. SAE paper 971711; 1997.
54. Agrawal A, Assanis DN. Multi-dimensional modeling of natural gas ignition under compression ignition using detailed chemistry. SAE paper 980136; 1998.
55. Agrawal A, Assanis DN. Multi-dimensional modeling of ignition, combustion and nitric oxide formation in direct injection natural gas engines. SAE paper 2000-01-1839; 2000.
56. Kong SC, Ayoub N, Reitz RD. Modeling combustion in compression ignition homogeneous charge engines. SAE paper 920512; 1992.
57. Kong SC, Marriot CD, Reitz RD, Christensen M. Modeling and experiments of HCCI engine combustion using detailed chemical kinetics with multidimensional CFD. SAE 2001-01-1026; 2001.
58. Kong SC, Marriott CD, Rutland CJ, Reitz RD. Experiments and CFD modeling of direct injection gasoline HCCI engine combustion. SAE paper 2002-01-1925; 2002.
59. Kong SC, Reitz RD, Christensen M, Johansson B. Modeling the effects of geometry-generated turbulence on HCCI engine combustion. SAE paper 2003-01-1088; 2003.
60. Tominaga R, Morimoto S, Kawabata Y, Matsuo S, Amano T. Effects of heterogeneous EGR on the natural gas-fueled HCCI engine using experiments. CFD and detailed kinetics. SAE paper 2004-01-0945; 2004.
61. Cox R.A., and Cole J.A. Chemical aspects of the auto-ignition of hydrocarbon-air mixtures. Combust Flame 60 2 (1985) 109-123
62. Hu H., and Keck J.C. Auto-ignition of adiabatically compressed combustible gas mixtures. SAE Trans 96 7 (1987) 592-604
63. Li H, Miller DL, Cernansky NP. Development of a reduced chemical kinetic model for prediction of preignition reactivity and autoignition of primary reference fuels. SAE paper 960498; 1996.
64. Griffiths J.F., Hughes K.J., Schreiber M., and Poppe C. A unified approach to the reduced kinetic modelling of alkane combustion. Combust Flame 99 3-4 (1994) 533-540
65. Tanaka S., Ayala F., and Keck J.C. A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine. Combust Flame 133 4 (2003) 467-481
66. Zheng J, Yang W, Miller DL, Cernansky NP. A skeletal chemical kinetic model for the HCCI combustion process. SAE paper 2002-01-0423; 2002.
67. Su W.H., and Huang H.Z. Development and calibration of a reduced chemical kinetic model of n-heptane for HCCI engine combustion. Fuel 84 9 (2005) 1029-1040
68. Jia M., and Xie M.Z. A chemical kinetics model of iso-octane oxidation for HCCI engines. Fuel 85 17-18 (2006) 2593-2604
69. Ohashi T, Yang X, Takabayashi T, Urata Y, Kubota S, Katsuyama H. Ignition and combustion simulation in HCCI engines. SAE paper 2006-01-1522; 2006.
70. Yao M.F., Huang C., and Zheng Z.L. Multi-dimensional numerical simulation on dimethyl ether/methanol dual fuel HCCI engine combustion and emission processes. Energy Fuel 21 2 (2007) 812-821
71. Galletti C., Parentea A., and Tognotti L. Numerical and experimental investigation of a mild combustion burner. Combust Flame 151 4 (2007) 649-664
72. Yao M, Chen Z, Zheng Z. Investigation of the effects of injection timing on thermo-atmosphere combustion of methanol. SAE paper 2007-01-0197; 2007.
73. Wang Z., Shuai S., Wang J., and Tian G. A computational study of direct injection gasoline HCCI engine with secondary injection. Fuel 85 12-13 (2006) 1831-1841
74. Reveille B, Kleemann A, Knop V, Habchi C. Potential of narrow angle direct injection diesel engines for clean combustion: 3D CFD analysis. SAE paper 2006-01-1365; 2006.
75. Knop V, Thirouard B, Cherel J. Influence of the local mixture characteristics on the combustion process in a CAI engine. SAE paper 2008-01-1671; 2008.
76. Zheng Z.L., and Yao M.F. Numerical simulation of the effects of charge stratification on combustion and emissions. Energy Fuel 21 4 (2007) 2018-2026
77. Ryu J., Kim H., and Lee K. A study on the spray structure and evaporation characteristic of common rail type high pressure injector in homogeneous charge compression ignition engine. Fuel 84 18 (2005) 2341-2350
78. Epping K, Aceves S, Bechtold R, Dec J. The potential of HCCI combustion for high efficiency and low emissions. SAE paper 2002-01-1923; 2002.
79. Christensen M, Hultqvist A, Johansson B. Demonstrating the multi fuel capability of a homogeneous charge compression ignition engine with variable compression ratio. SAE paper 1999-01-3679; 1999.
80. Ryan III TW, Matheaus AC Fuel requirements for HCCI engine operation. SAE paper 2003-01-1813; 2003.
81. Yao MF, Zheng ZQ, Zhang B, Chen Z. The effect of PRF fuel octane number on HCCI operation. SAE paper 2004-01-2992; 2004.
82. Liu H., Yao M., Zhang B., and Zheng Z. Influence of fuel and operating conditions on combustion characteristics of a homogeneous charge compression ignition engine. Energy Fuel 23 3 (2009) 1422-1430
83. Kalghatgi G, Risberg P, Angstrom HE. A method of defining ignition quality of fuels in HCCI engines. SAE paper 2003-01-1816; 2003.
84. Amann M, Ryan III TW, Kono N. HCCI fuels evaluations-gasoline and diesel boiling ranges. SAE paper 2005-01-3727; 2005.
85. Szybist JP, Bunting BG. Cetane number and engine speed effects on diesel HCCI performance and emissions. SAE paper 2005-01-3723.
86. Risberg P, Kalghatgi G, Angstrom H, Wahlin F. Auto-ignition quality of diesel-like fuels in hcci engines. SAE paper 2005-01-2127; 2005.
87. Li T, Okabe Y, Izumi H, Shudo T, Ogawa H. Dependence of ultra-High EGR low temperature diesel combustion on fuel properties. SAE paper 2006-01-3387; 2006.
88. Leppard WR. The chemical origin of fuel octane sensitivity. SAE paper 902137; 1990.
89. Westbrook C, Pitz W, Leppard R. The autoignition chemistry of paraffinic fuels and pro-knock and anti-knock additives: a detailed chemical kinetic study. SAE paper 912314; 1991.
90. x addition on the auto ignition behavior of natural gas under HCCI conditions. SAE paper 2002-01-1746; 2002.
91. Chen Z, Konno M, Oguma M, Yanai T. Experimental study of CI natural-gas/DME homogeneous charge engine. SAE paper 2000-01-0329; 2000.
92. Aceves SM, Flowers D, Martinez-Frias J. Espinosa-Losa F, Pitz WJ, Dibble R. Fuel and additive characterization for HCCI combustion. SAE paper 2003-01-1814; 2003.
93. Shibata G, Oyama K, Urushihara T, Nakano T. Correlation of low temperature heat release with fuel composition and HCCI engine combustion. SAE paper 2005-01-0138.
94. Farrell JT, Bunting BG. Fuel composition effects at constant RON and MON in an HCCI engine operating with negative valve overlap. SAE paper 2006-01-3275; 2006.
95. Shudo T, Ono Y. HCCI Combustion of hydrogen, carbon monoxide and dimethyl ether. SAE paper 2002-01-0112; 2002.
96. Zheng ZQ, Yao MF, Chen Z, Zhang B. Experimental study on HCCI combustion of dimethyl ether (DME)/methanol dual fuel. SAE paper 2004-01-2993; 2004.
97. Yap D., and Megaritis A. Applying forced induction to bioethanol HCCI operation with residual gas trapping. Energy Fuel 19 5 (2005) 1812-1821
98. Megaritis A., Yap D., and Wyszynski M.L. Effect of inlet valve timing and water blending on bioethanol HCCI combustion using forced induction and residual gas trapping. Fuel 87 6 (2008) 732-739
99. Yeom K., Jang J., and Bae C. Homogeneous charge compression ignition of LPG and gasoline using variable valve timing in an engine. Fuel 86 4 (2007) 494-503
100. Jothi N.K.M., Nagarajan G., and Renganarayanan S. Experimental studies on homogeneous charge CI engine fueled with LPG using DEE as an ignition enhancer. Renew Energy 32 9 (2007) 1581-1593
101. Tsolakis A., Megaritis A., and Yap D. Application of exhaust gas fuel reforming in diesel and homogeneous charge compression ignition (HCCI) engines fuelled with biofuels. Energy 33 3 (2008) 462-470
102. Szybist JP, McFarlane J, Bunting BG. Comparison of simulated and experimental combustion of biodiesel blends in a single cylinder diesel HCCI engine. SAE paper 2007-01-4010; 2007.
103. Manente V, Tunestal P, Johansson B. Influence of the wall temperature and combustion chamber geometry on the performance and emissions of a mini HCCI engine fuelled with DEE. SAE paper 2008-01-0008; 2008.
104. Yao M.F., Chen Z., and Zheng Z.Q. Study on the controlling strategies of homogeneous charge compression ignition combustion with fuel of dimethyl ether and methanol. Fuel 85 14-15 (2006) 2046-2056
105. Yao M.F., Zhang B., and Zheng Z.Q. Effects of exhaust gas recirculation on combustion and emissions of a homogeneous charge compression ignition engine fuelled with primary reference fuels. P I Mech Eng D-J Aut 221 2 (2007) 197-213
106. Ryan T. HCCI-update of progress 2005. 12th Diesel engine-efficiency and emissions research (DEER) conference; 2006.
107. Schiessl R., and Maas U. Analysis of end gas temperature fluctuations in an SI engine by laser-induced fluorescence. Combust Flame 133 (2003) 19-27
108. Richter M, Engström J, Franke A, Alden M, Hultqvist A, Johansson B. The influence of charge inhomogeneity on the HCCI combustion process. SAE paper 2000-01-2868; 2000.
109. Christensen M, Johansson B. The effect of in-cylinder flow and turbulence on HCCI operation. SAE paper 2002-01-2864.
110. Kong SC, Reitz RD. Use of detailed kinetics to study HCCI engine combustion with consideration of turbulent mixing effects. ASME Paper 2000-ICE-306.
111. Zhang YZ, Kung EH, Haworth DC. A pdf method for multidimensional modeling of HCCI engine combustion: effects of turbulence/chemistry interaction on ignition timing and emissions. In: Proceedings of the 30th international symposium on combustion; 2004.
112. Thirouard B, Cherel J, Knop V. Investigation of mixture quality effect on CAI combustion. SAE paper 2005-01-0141; 2005.
113. Dec JE, Sjöberg M. Isolating the effects of fuel chemistry on combustion phasing in an HCCI engine and the potential of fuel stratification for ignition control. SAE paper 2004-01-0557; 2004.
114. Sjöberg M, Dec JE. Smoothing HCCI heat-release rates using partial fuel stratification with two-stage ignition fuels. SAE paper 2006-01-0629; 2006.
115. Ciajolo A., D'Anna A., Barbella R., Tregrossi A., and Violi A. The effect of temperature on soot inception in premixed ethylene flames. Proc Combust Inst 26 2 (1996) 2327-2333
116. Bockhorn H. Soot formation in combustion: (mechanisms and models). Springer Series Chem Phys 59 (1994) 3-7
117. Tree D.R., and Svensson K.I. Soot processes in compression ignition engines. Prog Energy Combust Sci 33 3 (2007) 272-309
118. Heywood J.B. Internal combustion engine fundamentals (1998), McGraw-Hill Inc, Singapore
119. Alriksson M, Denbratt I. Low temperature combustion in a heavy duty diesel engine using high levels of EGR. SAE paper 2006-01-0075; 2006.
120. Potter M, Durrett R, Motors G. Design for compression ignition high-efficiency clean combustion engines. 12th Annual diesel engine emissions reduction (DEER) conference; 2006.
121. Sasaki S, Ito T. Smoke-less rich combustion by low temperature oxidation in diesel engines. In: Proceedings JSAE annual congress; 2000.
122. x in a heavy duty diesel engine using high levels of EGR. SAE paper 2005-01-3836; 2005.
123. Kumano K, Iida N. Analysis of the effect of charge inhomogeneity on HCCI combustion by chemiluminescence measurement. SAE paper 2004-01-1902; 2004.
124. Ozaki J, Iida N. Effect of degree of unmixedness on HCCI combustion based on experiment and numerical analysis. SAE paper 2006-32-0046; 2006.
125. Kashdan JT, Docquier N, Bruneaux G. Mixture preparation and combustion via LIEF and LIF of combustion radicals in a direct-injection HCCI diesel engine. SAE paper 2004-01-2945; 2004.
126. Musculus Mark PB. Multiple simultaneous optical diagnostic imaging of early-injection low-temperature combustion in a heavy-duty diesel engine. SAE paper 2006-01-0079; 2006.
127. Dec J.E. A conceptual model of D.I. diesel combustion based on laser-sheet imaging. SAE Trans 106 3 (1997) 1319-1348
128. Espey C., Dec J.E., and Litzinger T.A. Quantitative 2-D fuel vapor concentration imaging in a firing D.I. diesel engine using planar laser-induced Rayleigh scattering. SAE Trans 103 3 (1994) 1145-1160
129. Fang T. Low-temperature combustion within a small-bore high-speed direct injection optically accessible diesel engine (2007), Illinois, 81-130, Urbana PhD Thesis
130. 2 trade-off of an HCCI engine using a multi-hole injector. SAE paper 2007-01-0180; 2007.
131. Glassman I. Combustion. 3rd ed. (1996), Academic Press,, New York
132. Dec JE, Espey C. Chemiluminescence imaging of auto-ignition in a DI diesel engine. SAE paper 982685; 1998.
133. Kawahara N, Tomita E, Kagajyo H. Homogeneous charge compression ignition combustion with dimethyl ether spectrum analysis of chemiluminescence. SAE paper 2003-01-1828; 2003.
134. Augusta R, Foster DE, Ghandhi JB, Eng J, Najt PM. Chemiluminescence measurements of homogeneous charge compression ignition (HCCI) combustion. SAE paper 2006-01-1520; 2006.
135. Mancaruso E, Merola SS, Vaglieco BM. Extinction and chemiluminescence measurements in CR DI diesel engine operating in HCCI mode. SAE paper 2007-01-0192; 2007.
136. Dec JE, Hwang W, Sjöberg M. An investigation of thermal stratification in HCCI engines using chemiluminescence imaging. SAE paper 2006-01-1518; 2006.
137. Persson H, Hultqvist A, Johansson B, Remón A. Investigation of the early flame development in spark assisted HCCI combustion using high speed chemiluminescence imaging. SAE paper 2007-01-0212; 2007.
138. Berntsson AW, Denbratt I. HCCI combustion using charge stratification for combustion control. SAE paper 2007-01-0210; 2007.
139. Kook S, Bae C. Combustion control using two-stage diesel fuel injection in a single-cylinder PCCI engine. SAE paper 2004-01-0938; 2004.
140. Kanda T, Hakozaki T, Uchimoto T, Hatano J, Kitayama N, Sono H. PCCI operation with early injection of conventional diesel fuel. SAE paper 2005-01-0378; 2005.
141. Kook S, Bae C, Miles PC, Choi D, Bergin M, Reitz RD. The effect of swirl ratio and fuel injection parameters on CO emission and fuel conversion efficiency for high-dilution, low-temperature combustion in an automotive diesel engine. SAE paper 2006-01-0197; 2006.
142. Upatnieks A, Mueller CJ, Martin GC. The influence of charge-gas dilution and temperature on DI diesel combustion processes using a short-ignition-delay oxygenated fuel. SAE paper 2005-01-2088; 2005.
143. Upatnieks A, Mueller CJ. Clean, controlled DI diesel combustion using dilute, cool charge gas and a short-ignition-delay oxygenated fuel. SAE paper 2005-01-0363; 2005.
144. Mueller CJ, Upatnieks A. Dilute clean diesel combustion achieves low emissions and high efficiency while avoiding control problems of HCCI. 11th Annual diesel engine emissions reduction (DEER) conference; 2005.
145. Fang T, Coverdill RE, Lee CF, White RA. Smokeless combustion within a small-bore HSDI diesel engine using a narrow angle injector. SAE paper 2007-01-0203.
146. Hultqvist A, Christensen M, Johansson B, Franke A, Richter M, Aldén M. A study of the homogeneous charge compression ignition combustion process by chemiluminescence imaging. SAE paper 1999-01-3680; 1999.
147. Persson H, Hildingsson L, Hultqvist A, Johansson B, Ruebel J. Investigation of boundary layer behaviour in HCCI combustion using chemiluminescence imaging. SAE paper 2005-01-3729; 2005.
148. Vressner A, Hultqvist A, Johansson B. Study on the combustion chamber geometry effects in an HCCI engine using high-speed cycle-resolved chemiluminescence imaging. SAE paper 2007-01-0217; 2007.
149. Aleiferis PG, Charalambides AG, Hardalupas Y, Taylor AMKP, Urata Y. Modelling and experiments of HCCI engine combustion with charge stratification and internal EGR. SAE paper 2005-01-3725; 2005.
150. Kook S, Bae C, Miles PC, Choi D, Pickett LM. The influence of charge dilution and injection timing on low-temperature diesel combustion and emissions. SAE paper 2005-01-3837; 2005.
151. Lu PH, Xie XB, Lai MC. Spectral analysis and chemiluminescence imaging of hydrogen addition to HSDI diesel combustion under conventional and low-temperature conditions. SAE paper 2004-01-2919; 2004.
152. Zhao H., and Ladommatos N. Optical diagnostics for in-cylinder mixture formation measurements in IC engines. Prog Energy Combust Sci 24 4 (1998) 297-336
153. Collin R, Nygren J, Richter M, Aldén M, Hildingsson L, Johansson B. Simultaneous OH- and formaldehyde-LIF measurements in an HCCI engine. SAE paper 2003-01-3218; 2003.
154. Särner G, Richter M, Aldén M, Hildingsson L, Hultqvist A, Johansson B. Simultaneous PLIF measurements for visualization of formaldehyde- and fuel-distributions in a DI HCCI engine. SAE paper 2005-01-3869; 2005.
155. Zhao H, Peng Z, Ma T. Investigation of the HCCI/CAI combustion process by 2-D PLIF imaging of formaldehyde SAE paper 2004-01-1901; 2004.
156. Seyfried H, Olofsson J, Sjöholm J, Richter M, Aldén M, Vressner A, et-al High-speed PLIF imaging for investigation of turbulence effects on heat release rates in HCCI combustion. SAE paper 2007-01-0213; 2007.
157. Hildingsson L, Persson H, Johansson B, Collin RC, Nygren J, Richter M, et-al Optical diagnostics of HCCI and UNIBUS using 2-D PLIF of OH and formaldehyde. SAE paper 2005-01-0175; 2005.
158. Berntsson AW, Andersson M, Dahl D, Denbratt I. A LIF-study of OH in the negative valve overlap of a spark-assisted HCCI combustion engine. SAE paper 2008-01-0037.
159. Musculus MPB, Lachaux T, Pickett LM, Idicheria CA. End-of-injection over-mixing and unburned hydrocarbon emissions in low-temperature-combustion diesel engines. SAE paper 2007-01-0907; 2007.
160. Hultqvist A, Christensen M, Johansson B, Richter M, Nygren J, Hult H, et-al The HCCI combustion process in a single cycle-high-speed fuel tracer LIF and chemiluminescence imaging. SAE paper 2002-01-0424; 2002.
161. Olofsson J, Seyfried H, Richter M, Aldén M, Vressner A, Hultqvist A, et-al High-speed LIF imaging for cycle-resolved formaldehyde visualization in HCCI combustion. SAE paper 2005-01-0641; 2005.
162. Dubreuil A, Rousselle CM, Foucher F, Dagaut P. Comparison between LIF measurements and modelling predictions of OH-HCHO during HCCI mode combustion development. SAE paper 2007-24-0019; 2007.
163. Kashdan JT. Papagni JF. LIF imaging of auto-ignition and combustion in a direct-injection, diesel-fuelled HCCI engine. SAE paper 2005-01-3739; 2005.
164. Berntsson AW, Denbratt I. Optical study of HCCI combustion using NVO and an SI stratified charge. SAE paper 2007-24-0012; 2007.
165. Miles P.C., Collin R., Hildingsson L., Hultqvist A., and Andersson O. Combined measurements of flow structure, partially oxidized fuel, and soot in a high-speed, direct-injection diesel engine. Proc Combust Inst 31 2 (2007) 2963-2970
166. Lachaux T., and Musculus M.P.B. In-cylinder unburned hydrocarbon visualization during low-temperature compression-ignition engine combustion using formaldehyde PLIF. Proc Combust Inst 31 2 (2007) 2921-2929
167. Genzale C.L., Reitz R.D., and Musculus M.P.B. Effects of spray targeting on mixture development and emissions formation in late-injection low-temperature heavy-duty diesel combustion. Proc Combust Inst (2009) 10.1016/ j.proci.2008.06.072
168. Dec JE, Canaan RE. PLIF Imaging of NO formation in a DI diesel engine. SAE paper 980147.
169. Hildenbrand F., Schulz C., Wolfrum J., Keller F., and Wagner E. Laser diagnostic analysis of NO formation in a direct injection Diesel engine with pump-line nozzle and common-rail injection systems. Proc Combust Inst 28 (2000) 1137-1144
170. Bessler W.G., Hofmann M., Zimmermann F., Suck G., Jakobs J., Nicklitzsch S., et al. Quantitative in-cylinder NO-LIF imaging in a realistic gasoline engine with spray-guided direct injection. Proc Combust Inst 30 2 (2005) 2667-2674
171. Fissenewert U, Sick V, Pucher H. Characterization of combustion and NO formation in a spray-guided gasoline direct-injection engine using chemiluminescence imaging, NO-PLIF, and Fast NO exhaust gas analysis. SAE paper 2005-01-2089.
172. Zilwa SD, Steeper R. Predicting emissions from HCCI engines using LIF imaging. SAE paper 2005-01-3747.
173. x emissions from HCCI engines using LIF imaging. SAE paper 2006-01-0025.
174. Zhao H., and Ladommatos N. Optical diagnostics for soot and temperature measurement in diesel engines. Prog Energy Combust Sci 24 3 (1998) 221-255
175. Zhao H., and Ladommatos N. Engine combustion instrumentation and diagnostics (2001), Society of Automotive Engineers, Inc, Warrendale, PA
176. Dec J.E. Advanced compression-ignition engines-understanding the in-cylinder processes. Proc Combust Inst 32 2 (2009) 2727-2742
177. Snelling D.R., Smallwood G.J., Liu F., Gülder O.L., and Bachalo W.D. A calibration-independent laser-induced incandescence technique for soot measurement by detecting absolute light intensity. Applied Optics 44 31 (2005) 6773-6785
178. Schulz C., Kock B.F., Hofmann M., Michelsen H., Will S., and Bougie B. Laser-induced incandescence: recent trends and current questions. Appl Phys B Lasers Optics 83 3 (2006) 333-354
179. Singh S, Reitz RD, Musculus Mark PB. 2-Color thermometry experiments and high-speed imaging of multi-mode diesel engine combustion. SAE paper 2005-01-3842.
180. Huestis E, Erichkson PA, Musculus Mark PB. In cylinder and exhaust soot in low-temperature combustion using a wide-range of EGR in a heavy-duty diesel engine. SAE paper 2007-01-4017.
181. Dec J.E., and Coy E.B. OH radical imaging in a DI diesel engine and the structure of the early diffusion flame. SAE Trans 105 3 (1996) 1127-1148
182. Dec J.E., and Tree D.R. Diffusion-flame/wall interactions in a heavy-duty DI diesel engine. SAE Trans 110 3 (2001) 1618-1634
183. Dec JE, Kelly-Zion PL The effects of injection timing and diluent addition on late-combustion soot burnout in a DI diesel engine based on simultaneous 2-D imaging of OH and soot. SAE paper 2000-01-0238; 2000.
184. Dec J.E. A conceptual model of DI diesel combustion based on laser-sheet imaging. SAE Trans 106 3 (1997) 1319-1348
185. Fang T, Coverdill RE, Lee CF, White RA. Combustion and soot visualization of low temperature combustion within an HSDI diesel engine using multiple injection strategy. SAE paper 2006-01-0078; 2006.
186. Kelly-Zion P.L., and Dec J.E. A computational study of the effect of fuel type on ignition time in homogeneous charge compression ignition engines. Proc Combust Inst 28 1 (2000) 1187-1194
187. Zhao F., Asmus T.W., Assanis D.N., Dec J.E., Eng J.A., and Najt P.M. Homogenous charge compression ignition (HCCI) engine: key research and development issues (2003), Society of Automotive Engineers, Warrendale, PA 150-154
188. Takeda Y, Keiichi N, Keiichi N. Emission characteristics of premixed lean diesel combustion with extremely early staged fuel injection. SAE paper 961163; 1996.
189. Nakagome K, Shimazaki N, Miimura K, Kobayashi S. Combustion and emissions characteristics of premixed lean diesel combustion engine. SAE paper 970898; 1997.
190. Hashizume T, Miyamato T, Akagawa H, Tsujimura K. Combustion and emission characteristics of multiple stage diesel combustion. SAE paper 980505; 1998.
191. Akagawa H, Miyamoto T, Harada A, Sasaki S, Shimazaki N, Hakeshi T, et-al Approaches to solve problems of the premixed lean diesel combustion. SAE paper 1999-01-0183; 1999.
192. Morita A, Iwashiro Y, Aoyagi Y, Hashizume T. Observation of the diesel combustion process in multiple stage injection. In: Proceedings of Thiesel 2000 thermofluidynamic processes in diesel engines. p. 447-52.
193. Nishijima Y, Asaumi Y, Aoyagi Y. Impingement spray system with direct water injection for premixed lean diesel combustion control. SAE paper 2002-01-0109; 2002.
194. Yanagihara H. Ignition timing controlat Toyota "UNIBUS" combustion system. In: Proceedings of the IFP international congress; 2001. p. 35-42.
195. Hasegawa R, Yanagihara H. HCCI combustion in DI diesel engine. SAE paper 2003-01-0745; 2003.
196. Su WH, Lin TJ, Pei YQ. A compound technology for HCCI combustion in a DI diesel engine based on the multi-pulse injection and the BUMP combustion chamber. SAE paper 2003-01-0741; 2003.
197. Su WH, Zhang XY, Lin TJ. Study of pulse spray, heat release, emissions and efficiencies in a compound diesel HCCI combustion engine. In: Proceedings of ASME-ICE ASME internal combustion engine division. Fall Technical Conference, ICEF2004-927; 2004.
198. Su WH, Wang H, Liu B. Injection mode modulation for HCCI diesel combustion. SAE paper 2005-01-0117; 2005.
199. x emissions and high fuel efficiency diesel combustion: the NADITM concept using dual mode combustion. Oil Gas Sci Technol 58 1 (2003) 101-114
200. Shimazaki N, Tsurushima T, Nishimura T. Dual mode combustion concept with premixed diesel combustion by direct injection near top dead center. SAE paper 2003-01-0742; 2003.
201. Mueller CJ, Martin GC, Briggs TE, Duffy KP. An experimental investigation of in-cylinder processes under dual-injection conditions in a DI diesel engine. SAE paper 2004-01-1843; 2004.
202. Duret P, Gatellier B, Monteiro L, Miche M, Zima P. Maroteaux D. Progress in diesel HCCI combustion within the european SPACE LIGHT project. SAE paper 2004-01-1904; 2004.
203. Kim M.Y., and Lee C.S. Effect of a narrow fuel spray angle and a dual injection configuration on the improvement of exhaust emissions in a HCCI diesel engine. Fuel 86 17-18 (2007) 2871-2880
204. Kawashima JI, Ogawa H, Tsuru Y. Research on a variable swirl intake port for 4-valve high-speed DI Diesel engines. SAE paper 982680; 1998.
205. Kimura S, Aoki O, Ogawa H, Muranaka S, Enomoto Y. New combustion concept for ultra-clean and high-efficiency small DI diesel engines. SAE paper 1999-01-3681; 1999.
206. Kimura S, Aoki O, Kitahara Y, Aiyoshizawa E. Ultra-clean combustion technology combining a low-temperature and premixed combustion concept for Meeting Future Emission Standards. SAE paper 2000-01-0200; 2000.
207. Kawamoto K, Araki T, Shinzawa M, Kimura S, Koide S, Shibuya M. Combination of combustion concept and fuel property for ultra-clean DI diesel. SAE paper 2004-01-1868; 2004.
208. Suzuki H, Koike N, Odaka M. Exhaust purification of diesel engines by homogeneous charge with compression ignition. Part 1: experimental investigation of combustion and exhaust emission behavior under pre-mixed homogeneous charge compression ignition method. SAE paper 970313; 1997.
209. x formation by numerical simulation with experiment. SAE paper 970315; 1997.
210. Suzuki H, Koike N, Odaka M. Combustion control method of homogeneous charge diesel engines. SAE paper 980509; 1998.
211. Odaka M, Suzuki H, Koike N, Ishii H. Search for optimizing method of homogeneous charge diesel combustion. SAE paper 1999-01-0184; 1999.
212. Midlam-Mohler S, Guezennec Y, Rizzoni G. Mixed-mode diesel HCCI with external mixture formation: preliminary results. 9th Diesel engine emissions reduction (DDER) workshop; 2003.
213. Guezennec Y, Midlam-Mohler S, Rizzoni G. A mixed mode HCCI/DI engine based on a novel heavy fuel atomizer. 8th Diesel engine emissions reduction (DEER) workshop; 2002.
214. Midlam-Mohler S. Diesel HCCI with external mixture preparation. 10th Diesel engine emissions reduction (DEER) workshop; 2004.
215. Aroonsrisopon T, Werner P, Waldman JO, Sohm V, Foster DE, Morikawa T, et-al Expanding the HCCI operation with the charge stratification. SAE paper 2004-01-1756; 2004.
216. Inagaki K., and Fuyuto T. Combustion system with premixture-controlled compression ignition. R&D Rev Toyota CRDL 41 3 (2006) 35-46
217. Natti KC. PM characterization in an HSDI diesel engine under conventional and LTC regimes. SAE paper 2008-01-1086; 2008.
218. Henein NA, Bhattacharyya B, Schipper J, Kastury A, Bryzik W. Effect of injection pressure and swirl motion on diesel engine-out emissions in conventional and advanced combustion regimes. SAE paper 2006-01-0076; 2006.
219. Choi D., Miles P.C., Yun H.H., and Reitz R.D. A parametric study of low-temperature, late-injection combustion in a HSDI diesel engine. Spec Issue Adv Combust Technol Intern Combust Engines 48 4 (2005) 656-664
220. Aoyagi Y, Osada H, Misawa M, Goto Yuichi, Ishii H. Advanced diesel combustion using of wide range, high boosted and cooled EGR system by single cylinder engine. SAE paper 2006-01-0077; 2006.
221. Colban W, Miles PC, Oh S. Effect of intake pressure on performance and emissions in an automotive diesel engine operating in low temperature combustion regimes. SAE paper 2007-01-4063; 2007.
222. Genzale CL, Reize RD, Musculus MPB. Effects of piston bowl geometry on mixture development and late-injection low-temperature combustion in a heavy-duty diesel engine. SAE paper 2008-01-1330; 2008.
223. Opat R, Ra Y, Gonzalez DMA, Krieger, R., Reitz RD, Foster DE, et-al Investigation of mixing and temperature effects on HC/CO emissions for highly dilute low temperature combustion in a light duty diesel engine. SAE paper 2007-01-0193.
224. Kumar R, Zheng M. Fuel efficiency improvements of low temperature combustion diesel engines. SAE paper 2008-01-0841; 2008.
225. Dodge LG, Simescu S, Neely GD, Maymar MJ, Dickey DW, Savonen CI. Effect of small holes and high injection pressures on diesel engine combustion. SAE paper 2002-01-0494; 2002.
226. Alfuso S, Allocca L, Auriemma M, Caputo G. Analysis of a high pressure diesel spray at high pressure and temperature environment conditions. SAE paper 2005-01-1239; 2005.
227. Ryan T. Combustion targets for low emissions and high efficiency. 11th Annual diesel engine emissions reduction (DEER) conference. Chicago, IL; August, 2005.
228. Su WH, Zhang XY. Mixing enhancement by a Bump ring in a combustion chamber for compound combustion. SAE paper 2005-01-3721; 2005.
229. CD ADAPCO Group. Methodology, STAR-CD Version 3.15; 2001.
230. Reitz RD, Sun Y, Nevin RM, Gonzalez MA. PCCI investigation using variable intake valve closing in a heavy duty diesel engine. SAE paper 2007-01-0903; 2007.
231. Caterpillar. Heavy Truck Clean Diesel (HTCD) Program (Heavy Duty HCCI Development Activities). 11th Diesel Engine-Efficiency and Emissions Research (DEER) Conference, Coronado, CA, 2004.
232. http://www.scania.com.
233. Ishibashi Y, Asai, M. Improving the exhaust emissions of two-stroke engine by applying the activated radical combustion. SAE paper 960742; 1996.
234. Kaahaaina NB, Simon AJ, Caton PA, Edwards CF. Use of dynamic valving to achieve residual-affected combustion. SAE paper 2001-01-0549; 2001.
235. Zhao H, Li J, Ma T, Ladommatos N. Performance and analysis of a 4-stroke multi-cylinder gasoline engine with CAI combustion. SAE paper 2002-01-0420; 2002.
236. Law D, Kemp D, Allen J, Kirkpatrick G, Copland T. Controlled combustion in an IC engine with a fully variable valve train. SAE paper 2000-01-0251; 2000.
237. Kontarakis G, Collings N, Ma T. Demonstration of HCCI using a single cylinder four-stroke SI engine with modified valve timing. SAE paper 2000-01-2870; 2000.
238. Marriott CD, Reitz RD. Experimental investigation of direct injection-gasoline for premixed compression ignited combustion phasing control. SAE paper 2002-01-0418; 2002.
239. Urata Y, Awasaka M, Takanashi J, Kakinuma T, Hakozaki T, Umemoto A. A study of gasoline-fuelled HCCI engine equipped with electromagnetic valve train. SAE paper 2004-01-1898; 2004.
240. Li YF, Zhao H, Brouzos N, Ma T. Effect of injection timing on mixture and CAI combustion in a GDI engine with an air-assisted injector. SAE paper 2006-01-0206; 2006.
241. Tian GH, Wang Z, Wang JX. HCCI combustion control by injection strategy with negative valve overlap in a GDI engine. SAE 2006-01-0415; 2006.
242. Yap D, Wyszynski ML, Megaritis A, Xu H. Applying boosting to gasoline HCCI operation with residual gas trapping. SAE paper 2005-01-2121; 2005.
243. Liu H., Yao M., Zhang B., and Zheng Z. Effects of inlet pressure and octane numbers on combustion and emissions of a homogeneous charge compression ignition (HCCI) engine. Energy Fuel 22 4 (2008) 2207-2215
244. Cairns A, Blaxill H. The effects of combined internal and external exhaust gas recirculation on gasoline controlled auto-ignition. SAE paper 2005-01-0133; 2005.
245. Hyvonen J, Haraldsson G, Johansson B. Operating range in a multi cylinder HCCI engine using variable compression ratio. SAE paper 2003-01-1829; 2003.
246. Christensen M, Johansson B. Supercharged homogeneous charge compression ignition (HCCI) with exhaust gas recirculation and pilot fuel. SAE paper 2000-01-1835.
247. Hyvonen J, Haraldsson G, Johansson B. Operating conditions using spark assisted HCCI combustion during combustion mode transfer to SI in a multi-cylinder VCR-HCCI engine. SAE paper 2005-01-0109.
248. Yang JL, Culp T, Kenny T. Development of a gasoline engine system using HCCI technology-the concept and the test results. SAE paper 2002-01-2832; 2002.
249. Yang J. Expanding the operating range of homogeneous charge compression ignition-spark ignition dual-mode engines in the homogeneous charge compression ignition mode. Int J Engine Research 6 4 (2005) 279-288
250. Furhapter AF, Piock W, Fraidl GK. CSI - controlled auto ignition - the best solution for the fuel consumption - versus emission trade-off? SAE paper 2003-01-0754; 2003.
251. Xie H, Hou SZ, Qin J, Zhang Y, Li N, Zhao H. Control strategies for steady and transient operation of a 4-stroke gasoline engine with CAI combustion using a 4-variable valve actuating system (4VVAS). SAE paper 2006-01-1083; 2006.
252. Zhang Y, Xie H, Chen T, Zhou NH, Zhao H. Study of SI-HCCI-SI transition on a port fuel injection engine equipped with 4VVAS. SAE paper 2007-01-0199; 2007.
253. Tian GH, Wang Z, Ge QQ, Wang JX, Shuai SJ. Mode swith of SI-HCCI combustion on a GDI engine. SAE paper 2007-01-0195; 2007.
254. Koopmans L, Denbratt I, Ström H, Lundgren S, Backlund O. Demonstrating a SI-HCCI-SI mode change on a volvo 5-cylinder electronic valve control engine. SAE paper 2003-01-0753; 2003.
255. Roelle M., Shaver G., and Gerdes J.C. Tackling the transition: a multi-mode combustion model of SI and HCCI for mode transition control. ASME international mechanical engineering congress and exposition (2004), California, Anaheim
256. Santoso HG, Matthews J, Cheng WK. Managing Si/HCCI dual-mode engine operation. SAE paper 2005-01-0162; 2005.
257. Shaver G.M., Roelle M.J., and Gerdes J.C. Modeling cycle-to-cycle dynamics and mode transition in HCCI engines with variable valve actuation. Control Eng Practice 14 3 (2006) 213-222
258. Zhao H. HCCI and CAI engines for the automotive industry (2007), Woodhead Publishing Ltd
259. Wang Z. Research on steady and transient operation of HCCI engine with gasoline direct injection. SAE paper 2008-01-1723; 2008.
260. Andrae J., Johansson D., Björnbom P., Risberg P., and Kalghatgi G. Co-oxidation in the auto-ignition of primary reference fuels and n-heptane/toluene blends. Combust Flame 140 4 (2005) 267-286
261. Andrae J., Björnbom P., Cracknell R.F., and Kalghatgi G. Autoignition of toluene reference fuels at high pressures modeled with detailed chemical kinetics. Combust Flame 149 1-2 (2007) 2-24
262. Yoshiyama S, Tomita E, Homamoto Y. Fundamental study on combustion diagnostics using a spark plug as ion probe. SAE paper 2000-01-2828; 2000.
263. Yoshiyama S, Tomita E. Combustion diagnostics of a spark ignition engine using a spark plug as an ion probe. SAE paper 2002-01-2838; 2002.
264. Andersson I, Eriksson L, Ion sensing for combustion stability control of a spark ignited direct injected engine. SAE paper 2000-01-0552; 2000.
265. Hellring M, Holmberg U. A comparison of ion current based algorithms for peak pressure control. SAE paper 2001-01-1920; 2001.
266. Daniels CF, Zhu GG, Winkelman J. Inaudible knock and partial-burn detection using in-cylinder ionization signal. SAE paper 2003-01-3149; 2003.
267. Suzuki T, Ohara H, Kakishima A, Yoshida K, Shodi H. A study of knocking using ion current and light emission. SAE paper 2003-32-0038; 2003.
268. Strandh P, Christensen M, Bengtsson J, Johansson R, Vressner A, Tunestal P, et-al Ion current sensing for HCCI combustion feedback. SAE paper 2003-01-3216; 2003.
269. Mehresha P., Soudera J., Flowersb D., Riedelc U., and Dibble R.W. Combustion timing in HCCI engines determined by ion-sensor: experimental and kinetic modelling. Proc Combust Inst 30 2 (2005) 2701-2709
270. Bogin Jr. G., Chen J., and Dibble R.W. The effects of intake pressure, fuel concentration, and bias voltage on the detection of ions in a homogeneous charge compression ignition (HCCI) engine. Proc Combust Inst 32 2 (2009) 2877-2884
271. Xie H, Yang L, Qin J, Gao R, Zhu HG, He BQ, et-al The effect of spark ignition on the CAI combustion operation. SAE paper 2005-01-3738; 2005.
272. Bunting BG. Combustion, control, and fuel effects in a spark assisted HCCI engine equipped with variable valve timing. SAE paper 2006-01-0872; 2006.
273. Felsch C, Sloane T, Han J, Barths H, Lippert A. Numerical investigation of recompression and fuel reforming in a SIDI-HCCI engine. SAE paper 2007-01-1878; 2007.