Multi-mechanism models: Present state and future trends

International Journal of Plasticity

Volumn 27, Issue 2, 2011, Pages 250-281

  Saï, Kacem ^a  

^a UNIVERSITY OF SFAX   (Tunisia)

Author keywords

Creep; Cyclic behavior; Multi mechanism models; Plasticity

Indexed keywords

CYCLIC BEHAVIOR; FURTHER DEVELOPMENT; FUTURE TRENDS; MECHANICAL EFFECTS; MECHANISM MODEL; MULTI-MECHANISM MODELS; PHYSICAL DEFORMATION;

PLASTICITY;

CREEP;

EID: 78449280632     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2010.05.003     Document Type: Article

References (79)

1. D. Abdeljaoued, I. Ben Naceur, K. Saï, and G. Cailletaud A new polycrystalline plasticity model to improve ratchetting strain prediction Mech. Res. Commun. 3 2009 309 315
2. M. Abdel-Karim Numerical integration method for kinematic hardening rules with partial activation of dynamic recovery term Int. J. Plast. 21 2005 1303 1321
3. M. Abdel-Karim Modified kinematic hardening rules for simulations of ratchetting Int. J. Plast. 25 2009 1560 1587
4. M. Abdel-Karim, and N. Ohno Kinematic hardening model suitable for ratchetting with steady-state Int. J. Plast. 16 2000 225 240
5. Andrieu, E., 1987. Influence de l'environnement sur la propagation des fissures dans un superalliage base nickel. Ph.D. Thesis, thse de doctorat, Ecole Nationale Supérieure des Mines de Paris.
6. S. Bari, and T. Hassan Anatomy of coupled constitutive models for ratcheting simulation Int. J. Plast. 16 2000 381 409
7. S. Bari, and T. Hassan Kinematic hardening rules in uncoupled modeling for multiaxial ratcheting simulation Int. J. Plast. 17 2001 885 905
8. S. Bari, and T. Hassan An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation Int. J. Plast. 18 2002 873 894
9. I.N. Basuroychowdhury, and G.Z. Voyiadjis A multiaxial cyclic plasticity model for non-proportional loading cases Int. J. Plast. 14 1998 855 870
10. A.J. Beaudoin, and A. Acharya A model for rate-dependent flow of metal polycrystals based on the slip plane lattice incompatibility Mater. Sci. Eng. A 2001 411 415
11. A.J. Beaudoin, A. Acharya, S.R. Chen, D.A. Korzekwa, and M.G. Stout Consideration of grain-size effect and kinetics in the plastic deformation of metal polycrystals Acta Mater. 48 2000 3409 3423
12. A. Benallal, and D. Marquis Constitutive equations for nonproportional cyclic elasto-viscoplasticity ASME J. Eng. Mater. Technol. 109 1987 326 336
13. B. Berisha, P. Hora, A. Wahlen, and L. Tong A combined isotropic-kinematic hardening model for the simulation of warm forming and subsequent loading at room temperature Int. J. Plast. 26 2010 126 140
14. M. Berveiller, and A. Zaoui An extension of the self-consistent scheme to plastically-following polycrystals J. Mech. Phys. Solids 26 1979 325 344
15. J. Besson Damage of ductile materials deforming under multiple plastic or viscoplastic mechanisms Int. J. Plast. 25 2009 2204 2221
16. Burlet, H., Cailletaud, G., 1987. Modelling of cyclic plasticity in finite element codes. In Proceedings of the 2nd International Conference on Constitutive laws for Engineering Materials; Theory and Application, Tucson, AZ.
17. G. Cailletaud, and P. Pilvin Utilisation de modles polycristallins pour le calcul par éléments finis Rev. Eur. EF 3 1994 515 541
18. G. Cailletaud, and K. Saï Study of plastic/viscoplastic models with various inelastic mechanisms Int. J. Plast. 11 1995 991 1005
19. G. Cailletaud, and K. Saï A polycrystalline model for the description of ratchetting: effect of intergranular and intragranular hardening Mater. Sci. Eng. A 480 2008 24 39
20. J.L. Chaboche Time independent constitutive theories for cyclic plasticity Int. J. Plast. 2 1986 149 188
21. J.L. Chaboche Continum damage mechanics: present state and future trends Nucl. Eng. Design 105 1987 19 33
22. Chaboche, J.L., Dang-Van, K., Cordier, G., 1979. Modelization of strain memory effect on the cyclic hardening of 316 stainless steel. In: SMIRT-5, Division L, Berlin.
23. G. Chen, X. Chen, and C.-D. Niu Uniaxial ratcheting behavior of 63Sn37Pb solder with loading histories and stress rates Mater. Sci. Eng. A 421 2006 238 244
24. G. Chen, S.-C. Shan, X. Chen, and H. Yuan Ratcheting and fatigue properties of the high-nitrogen steel x13crmnmon18-14-3 under cyclic loading Comput. Mater. Sci. 46 2009 572 578
25. E. Contesti, and G. Cailletaud Description of creep plasticity interaction with non unified constitutive equations: application to an austenitic stainless steel Nucl. Eng. Design 116 1989 265 280
26. P. Delobelle, and C. Oytana Etude des lois de comportement a haute temperature en plasticite-fluage, d'un acier inoxydable austenitique (12-17 sph) J. Nucl. Mater. 139 1986 204 227 (Pubitemid 16612700)
27. P. Delobelle, P. Robinet, and L. Bocher Experimental study and phenomenological modelization of ratchet under uniaxial and biaxial loading on an austenitic stainless steel Int. J. Plast. 11 1995 295 330
28. S. Gallée, P. Manach, and S. Thuillier Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths Mater. Sci. Eng. A 466 2007 47 55
29. Gautier, E., Cailletaud, C., 2004. N-phase modeling applied to phase transformations in steels: a coupled kinetics-mechanics approach. In: ICHMM-2004 International Conference on Heterogeneous Material Mechanics, Chongqing, Chine.
30. P. Germain, Q. Nguyen, and P. Suquet Continuum thermodynamics J. Appl. Mech. 50 1983 1010 1020
31. H. Ghonem, and D. Zheng Depth of intergranular oxygen diffusion during environment-dependent fatigue crack growth in alloy 718 Mater. Sci. Eng. A 150 1991 151 160
32. Goodman, A., 1983. Development of constitutive equations for computer analysis of stainless steel components. In: 4th International Seminar on Inelastic Analysis and Life Prediction in High Temperature Environment, Chicago.
33. B. Halphen, and Q. Nguyen Sur les matériaux standards généralisés J. Mécanique 14 1975 39 63
34. T. Hassan, L. Taleb, and S. Krishna Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models Int. J. Plast. 24 2008 1863 1889
35. J. Hausselt, and W. Blum Dynamic recovery during and after steady state deformation of al-11wt Acta Metall. 24 1976 1027 1039
36. R. Hill Continuum micro-mechanisms of elastoplastic polycrystals J. Mech. Phys. Solids 13 1965 89 101
37. A. Hlilou, I. Ben Naceur, K. Saï, S. Forest, C. Gérard, and G. Cailletaud Generalization of the polycrystalline b-model: finite element assessment and application to softening material behavior Comput. Mater. Sci. 45 2009 1104 1112
38. Y. Jiang, and P. Kurath Characteristics of the Armstrong-Frederick type plasticity models Int. J. Plast. 12 1996 387 415 (Pubitemid 126400234)
39. G. Kang Ratchetting: Recent progresses in phenomenon observation, constitutive modeling and application Int. J. Fatigue 30 2008 1448 1472
40. G. Kang, Q. Kan, J. Zhang, and Y. Sun Time-dependent ratchetting experiments of ss304 stainless steel Int. J. Plast. 22 2006 858 894
41. G. Kang, Y. Liu, and J. Ding Multiaxial ratchetting-fatigue interactions of annealed and tempered 42crmo steels: experimental observations Int. J. Fatigue 30 2008 2104 2118
42. S. Krishna, T. Hassan, I. Ben Naceur, K. Saï, and G. Cailletaud Macro versus micro-scale constitutive models in simulating proportional and nonproportional cyclic and ratcheting responses of stainless steel 304 Int. J. Plast. 25 2009 1910 1949
43. R. Lebensohn, and C. Tomé A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: application to zirconium alloys Acta Metall. Mater. 41 1993 2611 2624
44. G. Leclre, A. Nême, J. Cognard, and F. Berger Rupture simulation of 3d elastoplastic structures under dynamic loading Comp. Strategy 82 2004 2049 2059
45. J. Li, and G.J. Weng A secant-viscosity approach to the time-dependent creep of an elastic viscoplastic composite J. Mech. Phys. Solids 45 1997 1069 1083
46. R. Masson, M. Bornert, P. Suquet, and A. Zaoui An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals J. Mech. Phys. Solids 48 2000 1203 1227
47. D.L. McDowell Stress state dependence of cyclic ratchetting behavior of two rail steels Int. J. Plast. 11 1995 397 421
48. S. Mercier, and A. Molinari Homogenization of elastic-viscoplastic heterogeneous materials: self-consistent and mori-tanaka schemes Int. J. Plast. 25 2009 1024 1048
49. A. Molinari Extensions of the self-consistent tangent model Model. Simul. Mater. Sci. Eng. 7 1999 683 697
50. A. Molinari, G. Canova, and S. Ahzi A self consistent approach of the large deformation polycrystal viscoplasticity Acta Metall. 35 1987 2983 2994
51. J. Moosbrugger, N. Batane, and D. Morrison Modeling aspects of low plastic strain amplitude multiaxial cyclic plasticity in conventional and ultrafine grain nickel Int. J. Plast. 24 2008 1837 1862
52. A. Paquin, S. Berbenni, V. Favier, X. Lemoine, and M. Berveiller Micromechanical modeling of the elastic-viscoplastic behavior of polycrystalline steels Int. J. Plast. 17 2001 1267 1302
53. L. Portier, S. Calloch, D. Marquis, and P. Geyer Ratchetting under tension-torsion loading: experiments and modelling Int. J. Plast. 16 2000 303 335
54. S.M. Rahman, T. Hassan, and E. Corona Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure Int. J. Plast. 24 2008 1756 1791
55. C. Regrain, L. Laiarinandrasana, S. Toillon, and K. Saï Multi-mechanism models for semi-crystalline polymer: constitutive relations and finite element implementation Int. J. Plast. 25 2009 1253 1279
56. M. Ristinmaa Cyclic plasticity model using one yield surface only Int. J. Plast. 11 1995 163 181
57. P. Roumagnac, C. Guillemer-Néel, K. Saanouni, and M. Clavel Mechanical behaviour and deformation mechanicsms of Ni-Ti shape memory alloys in tension Eur. Phys. J. - Appl. Phys. 10 2000 109 122
58. G. Rousselier, F. Barlat, and J. Yoon A novel approach for anisotropic hardening modeling. part i: Theory and its application to finite element analysis of deep drawing Int. J. Plast. 25 2009 2383 2409
59. H. Sabar, M. Berveiller, V. Favier, and S. Berbenni A new class of micro-macro models for elastic-viscoplastic heterogeneous materials Int. J. Solids Struct. 39 2002 3257 3276
60. Saï, K., 1993. Modles grand nombre de variables internes et méthodes numériques associées. Ph.D. Thesis, thse de doctorat, Ecole Nationale Supérieure des Mines de Paris.
61. K. Saï, and G. Cailletaud Multi-mechanism models for the description of ratchetting: effect of the scale transition rule and of the coupling between hardening variables Int. J. Plast. 23 2007 1589 1617
62. K. Saï, V. Aubourg, G. Cailletaud, and J. Strudel Physical basis for model with various inelastic mechanisms for nickel base superalloy Mater. Sci. Technol. 20 2004 747 755
63. Sai, K., Cailletaud, G., Tourki, Z., Gautier, E., Amor, A., 2006. N-phase modeling of phase transformation in 304 stainless steel, bulging: finite element simulation and experimental validation. In: 12th International Symposium on Plasticity and its Applications, Halifax, Nova Scotia, Canada.
64. M. Schurig, and A. Bertram Computation of deformation textures in copper with equilibrium in small grain neighbourhoods Comput. Mater. Sci. 25 2002 193 199
65. S. Taheri, and E. Lorentz An elasto-plastic constitutive constitutive law for the description of uniaxial and multiaxial ratchetting Int. J. Plast. 15 1999 1159 1180
66. L. Taleb, and G. Cailletaud An updated version of the multimechanism model for cyclic plasticity Int. J. Plast. 26 2010 859 874
67. L. Taleb, and A. Hauet Multiscale experimental investigations about the cyclic behavior of the 304l ss Int. J. Plast. 25 7 2009 1359 1385
68. L. Taleb, G. Cailletaud, and L. Blaj Numerical simulation of complex ratcheting tests with a multi-mechanism model type Int. J. Plast. 22 2006 724 753
69. Thakker, A., Cowles, B., 1983. Low Strain, Long Life Creep Fatigue of AF2IDA and INCO718. NASA Report FR. 15652.
70. Z. Tourki, and K. Saï A new coupled approach between a micromechanical and a phenomenological modelling of the strain induced martensite transformation kinetics in a 304 austenitic stainless steel J. Steel Grips, Suppl. Metal Form. 2 2004 471 475
71. M. Turki, I. Ben Naceur, M. Makni, J. Rouis, and K. Saï Mechanical and damage behaviour of mortar-rubber aggregates mixtures: experiments and simulations Mater. Struct. 42 2009 1313 1324
72. V. Velay, G. Bernhart, and L. Penazzi Cyclic behavior modeling of a tempered martensitic hot work tool steel Int. J. Plast. 22 2006 459 496
73. J. Videau, G. Cailletaud, and A. Pineau Modélisation des effets mécaniques des transformations de phases J. Phys. 4 1994 227 232
74. L. Vincent, S. Calloch, and D. Marquis A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratchetting Int. J. Plast. 20 2004 1817 1850
75. G.J. Weng Constitutive equations of single crystals and polycrystalline aggregates under cyclic loading Int. J. Eng. Sci. 18 1980 1385 1397
76. M. Wolff, and L. Taleb Consistency for two multi-mechanism models in isothermal plasticity Int. J. Plast. 24 2008 2059 2083
77. M. Yaguchi, and Y. Takahashi Ratchetting of viscoplastic material with cyclic softening, Part II: Application of constitutive models Int. J. Plast. 21 2005 835 860
78. F. Yoshida A constitutive model of cyclic plasticity Int. J. Plast. 16 2000 359 380
79. J. Zarka, and J. Casier Elastic plastic response of structure to cyclic loading Nemat-Nasser Mechanics Today vol. 6 1979 Pergamon Press New York