Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths

Materials Science and Engineering: A

Volumn 466, Issue 1-2, 2007, Pages 47-55

  Gallee S ^a   Manach, P Y ^a   Thuillier, S ^a  

^a UNIVERSITÉ DE BRETAGNE SUD   (France)

Author keywords

Eddy current measurements; Martensitic transformation; Sequential tests; Shear tests; Stainless steel; Two phase model

Indexed keywords

CHARACTERIZATION; EDDY CURRENT TESTING; MARTENSITIC TRANSFORMATIONS; METAL FORMING; METALLOGRAPHIC MICROSTRUCTURE; METASTABLE PHASES; MICROSTRUCTURAL EVOLUTION; PLASTIC DEFORMATION; TENSILE TESTING;

EDDY CURRENT MEASUREMENT; SEQUENTIAL TEST; SHEAR TEST; TWO-PHASE MODEL;

AUSTENITIC STAINLESS STEEL;

AUSTENITIC STAINLESS STEEL; CHARACTERIZATION; EDDY CURRENT TESTING; MARTENSITIC TRANSFORMATIONS; METAL FORMING; METALLOGRAPHIC MICROSTRUCTURE; METASTABLE PHASES; MICROSTRUCTURAL EVOLUTION; PLASTIC DEFORMATION; TENSILE TESTING;

EID: 34447249325     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2007.02.054     Document Type: Article

References (51)

1. Tourki Z., Bargui H., and Sidhom H. J. Mater. Process. Technol. 166 (2005) 330-336
2. Serri J., Martiny M., and Ferron G. J. Mater. Process. Technol. 164-165 (2005) 1241-1247
3. Mangonon P.L., and Thomas G. Metall. Trans. A 1 (1970) 1577-1586
4. Hecker S.S., Stout M.G., Staudhammer K.P., and Smith J.L. Metall. Trans. A 13 (1982) 619-626
5. Murr L.E., Staudhammer K.P., and Hecker S.S. Metall. Trans. A 13 (1982) 627-635
6. Choi J.Y., and Jin W. Scr. Mater. 36 (1997) 99-104
7. De A.K., Murdock D.C., Mataya M.C., Speer J.G., and Matlock D.K. Scr. Mater. 50 (2004) 1445-1449
8. Iwamoto T., Tsuta T., and Tomita Y. Int. J. Mech. Sci. 40 (1998) 173-182
9. Lebedev A.A., and Kosarchuk V.V. Int. J. Plast. 5 (2000) 551-572
10. Powell G.W., Marshall E.R., and Backofen W.A. ASM Trans. Q. 50 (1958) 478-479
11. Okutani T., Yukawa N., Ishikawa K., and Jinma T. Proceedings of the Japanese Society and Technical Plasticity'95, Spring (1995) 331-332
12. Ludwingson D.C., and Berger J.A. J. Iron Steel Inst. (1969) 63-69
13. Bargui H., Sidhom H., and Tourki Z. Matériaux et Techniques 11-12 (2000) 31-41
14. Onyuna M., Oettel H., Martin U., and Weiss A. Adv. Eng. Mater. 6 (2004) 529-535
15. Tomita Y., and Iwamoto T. Int. J. Mech. Sci. 43 (2001) 2017-2034
16. Dan W.J., Zhang W.G., Li S.H., and Lin Z.Q. Comput. Mater. Sci. 40 (2007) 101-107
17. Al-Abbasi F.M., and Nemes J.A. Int. J. Mech. Sci. 45 (2003) 1449-1465
18. Cherkaoui M., Berveiller M., and Lemoine X. Int. J. Plast. 16 (2000) 1215-1241
19. Berbenni S., Favier V., Lemoine X., and Berveiller M. Mater. Sci. Eng. A 372 (2003) 128-136
20. Fischer F.D., Sun Q.P., and Tanaka K. Trans. ASME Appl. Mech. Rev. 49 (1996) 317-364
21. Levitas V.I. Int. J. Solids Struct. 35 (1998) 889-940
22. Taleb L., and Sidoroff F. Int. J. Plast. 19 (2003) 1821-1842
23. Taleb L., and Petit S. Int. J. Plast. 22 (2006) 110-130
24. Gallée S., Manach P.Y., Thuillier S., Pilvin P., and Lovato G. Matériaux et Techniques 3-4 (2004) 1-10
25. Gallée S., Manach P.Y., Pilvin P., Thuillier S., and Lovato G. Proceedings of the Seventh International Conference on Materials and Material Forming Processes ESAFORM2004. Trondheim, Norway (2004) 199-202
26. Manach P.Y., and Couty N. Comput. Mech. 28 (2001) 17-25
27. Lois A., and Ruch M. Insight: Non-Destr. Test. Condition Monit. 48 (2006) 26-29
28. Forest S., and Pilvin P. ZAMM: J. Appl. Math. Mech. 79 (1999) 199-202
29. Hill R. Philos. Mag. 41 (1950) 1132
30. J. Lemaitre, J.L. Chaboche, Mécanique des matériaux solides, Editions Dunod, Paris, 1985.
31. P.J. Armstrong, C.O. Frederick, CEGB Report RD/B/N 731, 1966.
32. Olson G.B., and Cohen M. Metall. Trans. A 6 (1975) 791-795
33. Stringfellow R.G., Parks D.M., and Olson G.B. Acta Metall. Mater. 40 (1992) 1703-1716
34. Shin H.C., Ha T.K., and Chang Y.W. Scr. Mater. 45 (2001) 823-829
35. P. Pilvin, PhD thesis, Université Paris 6, Paris, France, 1990.
36. Berveiller M., and Zaoui A. J. Mech. Phys. Solids 26 (1979) 325-344
37. Hoc T., and Forest S. Int. J. Plast. 17 (2001) 65-85
38. Sai K., Cailletaud G., and Forest S. Mech. Mater. 38 (2006) 203-217
39. Erieau P., Le Bot G., Godereaux S., and Plivin P. Proceedings of the Euromat 2000 Advances in Mechanical Behavior, Plasticity and Damage. Tours, France (2000)
40. Frenois S., Munier E., Feaugas X., and Pilvin P. Proceedings of the Fifth European Mechanics of Material Conference. Delft, The Netherlands (2001)
41. C. Gaudin, PhD thesis, Université de Technologie de Compiégne, France, 2002.
42. C.L. Magee, PhD thesis, Carnegie Institute of Technology, Pittsburg, USA, 1966.
43. Greenwood G.W., and Johnson R.H. Proc. Roy. Soc. A 283 (1965) 403-422
44. Mitter W. Materialkundlich-Technische Reihe 7 (1987), Borntraeger, Germany, Berlin 276
45. Fischer F.D., Oberaigner E.R., Tanaka K., and Nishimura F. Int. J. Solids Struct. 35 (1998) 2209-2227
46. Han H.N., Lee C.G., Oh C.S., Lee T.H., and Kim S.J. Acta Mater. 52 (2004) 5203-5214
47. Leblond J.B. Int. J. Plast. 5 (1989) 573-591
48. Leblond J.B., Devaux J., and Devaux J.C. Int. J. Plast. 5 (1989) 551-572
49. Pilvin P. International Seminar on Mécamat. The Inelastic Behaviour of Solids. Besançon, France (1988) 155
50. Hu Z., Rauch E.F., and Teodosiu C. Int. J. Plast. 8 (1992) 839-856
51. Teodosiu C., and Hu H.C. Proceedings of the 19th Riso International Symposium on Materials Science (1998) 445-455