Time-dependent ratchetting experiments of SS304 stainless steel

International Journal of Plasticity

Volumn 22, Issue 5, 2006, Pages 858-894

  Kang, Guozheng ^a   Kan, Qianhua ^a   Zhang, Juan ^a   Sun, Yafang ^a  

^a SOUTHWEST JIAOTONG UNIVERSITY   (China)

Author keywords

Elevated temperature; Multiaxial loading; Non proportionality; Ratchetting; Time dependence

Indexed keywords

CYCLIC LOADS; DEFORMATION; HYSTERESIS; STRAIN; THERMAL EFFECTS; VISCOELASTICITY;

ELEVATED TEMPERATURE; MULTIAXIAL LOADING; NON-PROPORTIONALITY; RATCHETTING; TIME DEPENDENCE;

STAINLESS STEEL;

EID: 29244439315     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2005.05.006     Document Type: Article

References (103)

1. M. Abdel-Karim Numerical integration method for kinematic hardening rules with partial activation of dynamic recovery term Int. J. Plast. 21 2005 1303 1321
2. M. Abdel-Karim Shakedown of complex structures according to various hardening rules Int. J. Press. Vessels Pip. 82 2005 427 458
3. Abdel-Karim, M., 2005c. On creep-ratcheting interaction: assessment of unified theories. In: Akhtar S. Khan, Amir Khoei (Eds.), Proceedings of PLASTICITY05: The Eleventh International Symposium on Plasticity and its Current Applications, Hawaii, January 3-8, pp. 163-165.
4. Abdel-Karim, M., 2005d. Assessments of unified theories in simulating creep- ratchetting behaviour of viscous materials. In: Proceedings of the 18th International Conference on Structural Mechanics in Reactor Technology SMiRT 18, August 7-12, Beijing, China, Paper No. B03-5.
5. M. Abdel-Karim, and N. Ohno Kinematic hardening model suitable for ratchetting with steady-state Int. J. Plast. 16 2000 225 240
6. S. Bari, and T. Hassan Anatomy of coupled constitutive models for ratchetting simulation Int. J. Plast. 16 2000 381 409
7. S. Bari, and T. Hassan Kinematic hardening rules in uncoupled modeling for multiaxial ratchetting simulation Int. J. Plast. 17 2001 885 905
8. S. Bari, and T. Hassan An advancement in cyclic plasticity modeling for multiaxial ratchetting simulation Int. J. Plast. 18 2002 873 894
9. I.N. Basuroychowdhury, and G.Z. Voyiadjis A multiaxial cyclic plasticity model for non-proportional loading cases Int. J. Plast. 14 1998 855 870
10. A. Benallal, and D. Marquis Constitutive equations for nonproportional cyclic elasto-viscoplasticity ASME J. Eng. Mater. Technol. 109 1987 326 336
11. L. Bocher, P. Delobelle, P. Robinet, and X. Feaugas Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension-torsion-internal and external pressure Int. J. Plast. 17 2001 1491 1530
12. G. Cailletaud, and K. SaÏ Study of plastic/viscoplastic models with various inelastic mechanisms Int. J. Plast. 11 1995 991 1005
13. E.P. Cernocky, and E. Krempl A theory of viscoplasticity based on infinitesimal total strain Acta Mech. 36 1979 263 289
14. E.P. Cernocky, and E. Krempl A theory of thermoplasticity based on infinitesimal total strain Int. J. Solids Struct. 16 1980 723 741
15. J.L. Chaboche, and G. Rousselier On the plastic constitutive equations. Part I. Rules developed with internal variable concept ASME J. Press. Vessel Technol. 105 1983 153 164
16. J.L. Chaboche, and D. Nouailhas Constitutive modeling of ratchetting effects. Part I. Experimental facts and properties of classical models ASME J. Eng. Mater. Technol. 111 1989 384 392
17. J.L. Chaboche, and D. Nouailhas Constitutive modeling of ratchetting effects. Part II. Possibilities of some additional kinematic rules ASME J. Eng. Mater. Technol. 111 1989 384 416
18. J.L. Chaboche On some modifications of kinematic hardening to improve the description of ratchetting effects Int. J. Plast. 7 1991 661 678
19. J.L. Chaboche Cyclic viscoplastic constitutive equations ASME J. Appl. Mech. 60 1993 813 828
20. J.L. Chaboche Modeling of ratchetting: evaluation of various approaches Eur. J. Mech. A 13 1994 501 518
21. X. Chen, and R. Jiao Modified kinematic hardening rule for multiaxial ratchetting prediction Int. J. Plast. 20 2004 871 898
22. X. Chen, R. Jiao, and K.S. Kim On the Ohno-Wang kinematic hardening rules for multiaxial ratchetting modeling of medium carbon steel Int. J. Plast. 21 2005 161 184
23. E. Corona, T. Hassan, and S. Kyriakides On the performance of kinematic hardening rules in predicting a class of biaxial ratchetting histories Int. J. Plast. 12 1996 117 145
24. O.U. Colak, and E. Krempl Modeling of uniaxial and biaxial ratcheting behaviour of 1026 carbon steel using the simplified viscoplasticity theory based on overstress (VBO) Acta Mech. 160 2003 27 44
25. P. Delobelle Synthesis of the elastoviscoplastic behaviour and modelization of an austenitic stainless steel over a large temperature range, under uniaxial and biaxial loading. Part I. Behvior Int. J. Plast. 9 1993 65 85
26. P. Delobelle, P. Robinet, and L. Bocher Experimental study and phenomenological modelization of ratchet under uniaxial and biaxial loading on an austenitic stainless steel Int. J. Plast. 11 1995 295 330
27. X. Feaugas, and C. Gaudin Ratchetting process in the stainless steel AISI 316L at 300 K: an experimental investigation Int. J. Plast. 20 2004 643 662
28. Q. Gao, G.Z. Kang, and X.J. Yang Uniaxial ratchetting of SS304 stainless steel at high temperatures: visco-plastic constitutive model Theor. Appl. Fract. Mech. 40 2003 105 111
29. C. Gaudin, and X. Feaugas Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses Acta Mater. 52 2004 3097 3110
30. C. Gupta, J.K. Chakravartty, G.R. Reddy, and S. Banerjee Uniaxial cyclic deformation behaviour of SA 333 Gr 6 piping steel at room temperature Int. J. Press. Vessels Pip. 82 2005 459 469
31. T. Hassan, and S. Kyriakides Ratchetting of cyclically hardening and softening materials: I. Uniaxial behaviour; II. Multiaxial behaviour Int. J. Plast. 10 1994 149 212
32. T. Hassan, E. Corona, and S. Kyriakides Ratchetting in cyclic plasticity. Part I. Uniaxial behaviour Int. J. Plast. 8 1992 91 116
33. T. Hassan, E. Corona, and S. Kyriakides Ratchetting in cyclic plasticity. Part II. Multiaxial behaviour Int. J. Plast. 8 1992 117 146
34. A. Haupt, and B. Schinke Experiments on ratchetting behaviour of AISI 316(L) austenitic steel at room temperature ASME J. Eng. Mater. Technol. 118 1996 281 284
35. K. Ikegami, and Y. Niitsu Experimental investigations on plastic deformation of stainless steel SUS 304 at high temperature A.Z. Tucson C.S. Desai Proceedings of the Second International Conference on Constitutive Laws for Engineering Materials: Theory and application 1987 Elsevier New York 111
36. K. Ikegami, and Y. Niitsu Plastic behaviour of stainless steel for complex loading at high temperature Trans. SMiRT 9L 1987 345 356
37. K. Ikegami, and Y. Niitsu Effect of creep prestrain on subsequent plastic deformation Int. J. Plast. 1 1985 331 346
38. Y. Jiang, and P. Kurath Characteristics of the Armstrong-Frederick type plasticity models Int. J. Plast. 12 1996 387 415
39. Y. Jiang, and P. Kurath Nonproportional cyclic deformation: critical experiments and analytical modeling Int. J. Plast. 13 1997 743 763
40. Y. Jiang, and H. Sehitoglu Cyclic ratchetting of 1070 steel under multiaxial stress state Int. J. Plast. 10 1994 579 608
41. Y. Jiang, and H. Sehitoglu Modeling of cyclic ratchetting plasticity ASME J. Appl. Mech. 63 1996 720 733
42. G. Johansson, M. Ekh, and K. Runesson Computational modeling of inelastic large ratchetting strains Int. J. Plast. 21 2005 955 980
43. G.Z. Kang A visco-plastic constitutive model for ratchetting of cyclically stable materials and its finite element implementation Mech. Mater. 36 2004 299 312
44. G.Z. Kang, and Q. Gao Uniaxial and non-proportionally multiaxial ratchetting of U71Mn rail steel: Experiments and simulations Mech. Mater. 34 2002 809 820
45. G.Z. Kang, and Q. Gao Temperature-dependent cyclic deformation of SS304 stainless steel under non-proportionally multiaxial load and its constitutive modeling Key Eng. Mater. 275-276 2004 247 252
46. G.Z. Kang, Q. Gao, X.J. Yang, and Y.F. Sun An experimental study on uniaxial and multiaxial strain cyclic characteristics and ratchetting of 316L stainless steel J. Mater. Sci. Technol. 17 2001 219 223
47. G.Z. Kang, Q. Gao, L.X. Cai, X.J. Yang, and Y.F. Sun Experimental study on the uniaxial and nonproportionally multiaxial ratchetting of SS304 stainless steel at room and high temperatures Nucl. Eng. Des. 216 2002 13 26
48. G.Z. Kang, Q. Gao, and X.J. Yang Uniaxial cyclic ratchetting and plastic flow properties of SS304 stainless steel at room and elevated temperatures Mech. Mater. 34 2002 145 159
49. G.Z. Kang, Q. Gao, and X.J. Yang A visco-plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratchetting of SS304 stainless steel at room temperature Mech. Mater. 34 2002 521 531
50. G.Z. Kang, N. Ohno, and A. Nebu Constitutive modeling of strain-range-dependent cyclic hardening Int. J. Plast. 19 2003 1801 1819
51. G.Z. Kang, Q. Gao, and X.J. Yang Uniaxial and multiaxial ratchetting of SS304 stainless steel at room temperature: experiments and visco-plastic constitutive model Int. J. Non-linear Mech. 39 2004 843 857
52. G.Z. Kang, Y.G. Li, J. Zhang, Y.F. Sun, and Q. Gao Uniaxial ratcheting and failure behaviours of two steels Theor. Appl. Fract. Mech. 43 2005 199 209
53. M. Kamlah, M. Korzen, and C. Tsakmakis Uniaxial ratchetting in rate-independent plasticity laws Acta Mech. 120 1997 173 198
54. P. Kaszynski, E. Ghorbel, and D. Marquis Experimental study of ratchetting during indentation of 316L stainless steel ASME J. Eng. Mater. Technol. 120 1998 218 223
55. F. Kawashima, A. Ishikawa, and Y. Asada Ratcheting deformation of advanced 316 steel under creep-plasticity condition Nucl. Eng. Des. 193 1999 327 336
56. A.R. Khoei, and N. Jamali On the implementation of a multi-surface kinematic hardening plasticity and its applications Int. J. Plast. 21 2005 1741 1770
57. M. Kobayashi, N. Ohno, and T. Igari Ratchetting characteristics of 316FR steel at high temperature, part II: analysis of thermal ratchetting induced by spatial variation of temperature Int. J. Plast. 14 1998 373 390
58. M. Korzen, and C. Tsakmakis Uniaxial ratchetting in linear viscoelasticity Acta Mech. 120 1997 157 172
59. D. Krämer, S. Krolop, A. Scheffold, and R. Stegmeyer Investigations into the ratchetting behaviour of austenitic pipes Nucl. Eng. Des. 171 1997 161 172
60. E. Krempl, and F. Khan Rate (time)-dependent deformation behaviour: an overview of some properties of metals and solid polymers Int. J. Plast. 19 2003 1069 1095
61. E. Krempl, and T. Nakamura The influence of the equilibrium stress growth law formulation on the modeling of recently observed relaxation behaviours JSME Int. J. (A) 41 1998 103 111
62. S.C. Kulkarni, Y.M. Desai, T. Kant, G.R. Reddy, Y. Parulekar, and K.K. Vaze Uniaxial and biaxial ratchetting study of SA333 Gr 6 steel at room temperature Int. J. Press. Vessels Pip. 80 2003 179 185
63. S.C. Kulkarni, Y.M. Desai, T. Kant, G.R. Reddy, P. Prasad, K.K. Vaze, and C. Gupta Uniaxial and biaxial ratchetting in piping materials-experiments and analysis Int. J. Press. Vessels Pip. 81 2004 609 617
64. M.C.M. Liu, and E. Krempl A uniaxial viscoplastic model based on total strain and overstress J. Mech. Phys. Solids 27 1979 377 391
65. D.L. McDowell A two surface model for transient nonproportional cyclic plasticity ASME J. Appl. Mech. 52 1985 298 308
66. D.L. McDowell Stress state dependence of cyclic ratchetting behaviour of two rail steels Int. J. Plast. 11 1995 397 421
67. M. Mizuno, Y. Mima, M. Abdel-Karim, and N. Ohno Uniaxial ratchetting of 316FR steel at room temperature: I. Experiments ASME J. Eng. Mater. Technol. 122 2000 29 34
68. T. Mayama, K. Sasaki, and H. Ishikawa Biaxial ratcheting deformation of type 304 stainless steel: effect of memorization of back stress J. Mech. Eng. Sci. 218 2004 901 908
69. T. Nakamura Application of viscoplastic theory based on overstress (VBO) to high temperature cyclic deformation of 316Fr steel JSME Int. J. (A) 41 1998 539 546
70. A. Nayebi, and R. El Abdi Cyclic plastic and creep behaviour of pressure vessels under thermomechanical loading Comput. Mater. Sci. 25 2002 285 296
71. Y. Niitsu, and K. Ikegami Plastic behaviour of SUS 304 subsequent to creep prestrain at various temperatures Bull. JSME 28 1985 1853 1860
72. Y. Niitsu, and K. Ikegami Effect of temperature variation on cyclic elastic-plastic behaviour of SUS 304 stainless steel ASME J. Press. Vess. Pip. 112 1990 152 157
73. N. Ohno, Y. Takahashi, and K. Kuwabara Constitutive modeling of anisothermal cyclic plasticity of 304 stainless steel ASME J. Eng. Mater. Technol. 111 1989 107 112
74. N. Ohno Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity Appl. Mech. Rev. 43 1990 283 295
75. N. Ohno Constitutive modeling of cyclic plasticity with emphasis on ratchetting Int. J. Mech. Sci. 40 1998 251 261
76. N. Ohno, and M. Abdel-Karim Uniaxial ratchetting of 316FR steel at room temperature: II. Constitutive modeling and simulation ASME J. Eng. Mater. Technol. 122 2000 35 41
77. N. Ohno, M. Abdel-Karim, M. Kobayashi, and T. Igari Ratchetting characteristics of 316FR steel at high temperature, part I: strain-controlled ratchetting experiments and simulations Int. J. Plast. 14 1998 355 372
78. N. Ohno, and J.D. Wang Kinematic hardening rules with critical state of dynamic recovery: I. Formulation and basic features for ratchetting behaviour Int. J. Plast. 9 1993 375 389
79. N. Ohno, and J.D. Wang Kinematic hardening rules with critical state of dynamic recovery: II. Application to experiments of ratchetting behaviour Int. J. Plast. 9 1993 390 403
80. N. Ohno, and J.D. Wang Kinematic hardening rules for simulation of ratchetting behaviour Eur. J. Mech. A 13 1994 519 531
81. N. Ohno, and J.D. Wang On modelling of kinematic hardening for ratcheting behaviour Nucl. Eng. Des. 153 1995 205 212
82. T. Oyamada, and K. Kaneko Influence of prestraining and deformation rate on viscoplasticity and strain ageing of metal materials (the case of SCM435 steel and SUS316 stainless steel under uniaxial loading) Trans. JSME (A) 59 1993 2612 2617 (in Japanese)
83. T. Oyamada, and K. Kaneko Influence of prestraining and deformation rate on viscoplasticity and strain ageing of metal materials (2nd Report, the case of stress relaxation of SCM435 steel under uniaxial loading) Trans. JSME (A) 60 1994 1397 1401 (in Japanese)
84. L. Portier, S. Calloch, D. Marquis, and P. Geyer Ratchetting under tension-torsion loadings: experiments and modeling Int. J. Plast. 16 2000 303 335
85. B. Postberg, and E. Weiß Simulation of ratcheting of AISI 316L(N) steel under nonproportional uniaxial loading and high number of load cycles using the Ohno and Wang nonlinear kinematic material model Int. J. Press. Vessels Pip. 77 2000 207 213
86. M. Ristinmaa Cyclic plasticity model using one yield surface only Int. J. Plast. 11 1995 163 181
87. M.D. Ruggles, and E. Krempl The influence of test temperature on the ratchetting behaviour of type SS304 stainless steel ASME J. Eng. Mater. Technol. 111 1989 378 383
88. M.D. Ruggles, and E. Krempl The interaction of cyclic hardening and ratchetting for AISI type 304 stainless steel at room temperature: I. Experiments J. Mech. Phys. Solids 38 1990 575 585
89. K. Sasaki, and H. Ishikawa Experimental observation on viscoplastic behaviour of SUS304 (creep and ratchetting behaviour) Trans. JSME (A) 59 1993 1451 1457 (in Japanese)
90. S. Taheri, and E. Lorentz An elastic-plastic constitutive law for the description of uniaxial and multiaxial ratchetting Int. J. Plast. 15 1999 1159 1180
91. E. Tanaka A nonproportionality parameter and a cyclic viscoplastic constitutive model taking into account amplitude dependences and memory effects of isotropic hardening Eur. J. Mech. A 13 1994 155 173
92. L. Vincent, S. Calloch, and D. Marquis A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratchetting Int. J. Plast. 20 2004 1817 1850
93. G.Z. Voyiadjis, and I.N. Basuroychowdhury Plasticity model for multiaxial cyclic loading and ratchetting Acta Mech. 126 1998 19 35
94. Z. Xia, and F. Ellyin A constitutive model with capability to simulate complex multiaxial ratchetting behaviour of materials Int. J. Plast. 13 1997 127 142
95. M. Yaguchi, and Y. Takahashi Inelastic behaviour of mod. 9Cr-1Mo steel and its decription by constitutive model considering dynamic strain aging effect Trans. SMiRT 14L 1997 59 66
96. M. Yaguchi, and Y. Takahashi Unified inelastic constitutive model for modified 9Cr-1Mo steel incorporating dynamic strain aging effect JMSE Int. J. (A) 42 1999 1 10
97. M. Yaguchi, and Y. Takahashi A viscoplastic constitutive model incorporating dynamic strain aging effect during cyclic deformation conditions Int. J. Plast. 16 2000 241 262
98. M. Yaguchi, and Y. Takahashi Ratchetting of viscoplastic material with cyclic softening, part 1: experiments on modified 9Cr-1Mo steel Int. J. Plast. 21 2005 43 65
99. M. Yaguchi, and Y. Takahashi Ratchetting of viscoplastic material with cyclic softening. Part 2. Application of constitutive models Int. J. Plast. 21 2005 835 860
100. F. Yoshida, J. Kondo, and Y. Kikuchi Viscoplastic behaviour of SUS 304 stainless steel under cyclic loading at room temperature JSME Int. J. (A) 32 1989 136 141
101. F. Yoshida Uniaxial and biaxial creep-ratchetting behaviour of SUS304 stainless steel at room temperature Int. J. Press. Vessels Pip. 44 1990 207 223
102. F. Yoshida Ratchetting behaviour of 304 stainless steel at 650 °C under multiaxially strain-controlled and uniaxially/multiaxially stress-controlled conditions Eur. J. Mech. A 14 1995 97 117
103. F. Yoshida A constitutive model of cyclic plasticity Int. J. Plast. 16 2000 359 380