Macro versus micro-scale constitutive models in simulating proportional and nonproportional cyclic and ratcheting responses of stainless steel 304

International Journal of Plasticity

Volumn 25, Issue 10, 2009, Pages 1910-1949

  Krishna, Shree ^a   Hassan, Tasnim ^a   Ben Naceur, Ilyes ^b   Saï, Kacem ^b   Cailletaud, Georges ^c  

^a North Carolina State University   (United States)

^b UNIVERSITY OF SFAX   (Tunisia)

^c PSL RESEARCH UNIVERSITY   (France)

Author keywords

Cross hardening; Cyclic plasticity; Nonproportional effects; Polycrystalline models; Ratcheting

Indexed keywords

CROSS HARDENING; CYCLIC PLASTICITY; NONPROPORTIONAL EFFECTS; POLYCRYSTALLINE MODELS; RATCHETING;

CONSTITUTIVE MODELS; FATIGUE OF MATERIALS; HARDENING; HYSTERESIS; LOADING; PLASTICITY; POLYCRYSTALLINE MATERIALS; SIMULATORS; STRESS ANALYSIS;

STAINLESS STEEL;

EID: 69449092531     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.12.009     Document Type: Article

References (76)

1. Abdeljaoued, D., Ben Naceur, I., Saï, K., Cailletaud, G., 2008. A new polycrystalline plasticity model to improve ratcheting strain prediction, Mechanics Research Communications, doi: doi:10.1016/j.mechrescom.2008.09.012.
2. Armstrong, P.J., Frederick, C.O., 1966. A mathematical representation of the multiaxial bauschinger effect. CEGB Report No. RD/B/N 731, Berkeley Nuclear Laboratories, Berkeley, UK.
3. Aubin, V., Bulthé, A.-L., Degallaix, S., Quaegebeur, P., 2003. Ratcheting behavior of a duplex stainless steel: characterization and modeling. In: Proceedings of the Ninth International Conference on the Mechanical Behavior of Materials, 25-29 May 2003, Genève, Suisse.
4. Baltov A., and Sawczuk A. A rule of anisotropic hardening. Acta Mech. 1 (1965) 81-92
5. Bari S., and Hassan T. Anatomy of coupled constitutive models for ratcheting simulation. Int. J. Plasticity 16 (2000) 381-409
6. Bari S., and Hassan T. An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation. Int. J. Plasticity 18 (2002) 873-894
7. Benallal A., and Marquis D. Constitutive equations for nonproportional cyclic elasto-viscoplasticity. ASME J. Eng. Mater. Technol. 109 (1987) 326-336
8. Benallal A., Le Gallo P., and Marquis D. An experimental investigation of cyclic hardening of 316 stainless steel and of 2024 aluminum alloy under multiaxial loading. Nucl. Eng. Des. 114 (1989) 345-353
9. Berveiller M., and Zaoui A. An extension of the self-consistent scheme to plastically flowing polycrystals. J. Mech. Phys. Solids 26 (1979) 325-344
10. Besson J., and Foerch R. Large scale object-oriented finite element code design. Comput. Meth. Appl. Mech. Eng. 142 (1997) 165-187
11. Besson J., Leriche R., Foerch R., and Cailletaud G. Object-oriented programming applied to the finite element method. Part II. Application to material behaviors. Rev. Eur. Elem. Finis 5-7 (1998) 567-588
12. Burlet, H., Cailletaud, G., 1987. Modeling of cyclic plasticity in finite element codes. In: Proceedings of the Second International Conference on Constitutive Laws for Engineering Materials: Theory and Applications, pp. 1157-1164.
13. Cailletaud G. A micromechanical approach to inelastic behavior of metals. Int. J. Plasticity 8 (1992) 55-73
14. Cailletaud G., and Pilvin P. Utilisation de modèles polycristallins pour le calcul par éléments finis. Rev. Eur. Elem. Finis 3-4 (1994) 515-541
15. Cailletaud G., and Saï K. Study of plastic/viscoplastic models with various inelastic mechanisms. Int. J. Plasticity 11 (1995) 991-1005
16. Cailletaud G., and Saï K. A polycrystalline model for the description of ratcheting: effect of intergranular and intragranular hardening. Mater. Sci. Eng. A 480 (2008) 24-39
17. Chaboche J.L. Time-independent constitutive theories for cyclic plasticity. Int. J. Plasticity 2 (1986) 149-188
18. Chaboche J.L. Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int. J. Plasticity 5 (1989) 247-302
19. Chaboche J.L. On some modifications of kinematic hardening to improve the description of ratcheting effects. Int. J. Plasticity 7 (1991) 661-678
20. Chaboche J.L. A review of some plasticity and viscoplasticity constitutive theories. Int. J. Plasticity 24 (2008) 1642-1693
21. Chaboche, J.L., Dang-Van, K., Cordier, G., 1979. Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel. In: Proceedings of the Fifth International Conference on SMiRT, Div. L, Berlin, Germany, L11/3.
22. Chen X., and Jiao R. Modified kinematic hardening rule for multiaxial ratcheting prediction. Int. J. Plasticity 20 (2004) 871-898
23. Delobelle P. Synthesis of the elastoviscoplastic behavior and modelization of an austenitic stainless steel over a large temperature range under uniaxial and biaxial loading. Part I. Behavior. Int. J. Plasticity 9 (1993) 65-85
24. Delobelle P., Robinet P., and Bocher L. Experimental study and phenomenological modelization of ratcheting under uniaxial and biaxial loading on an austenitic stainless steel. Int. J. Plasticity 11 (1995) 295-330
25. Doong S.H., and Socie D.F. Constitutive modeling of metals under nonproportional cyclic loading. J. Eng. Mater. Technol. 113 (1990) 23-30
26. Ellyin F., and Xia Z. A rate-independent constitutive model for transient non-proportional loading. J. Mech. Phys. Solids 37 (1989) 71-91
27. Hassan T., and Kyriakides S. Ratcheting in cyclic plasticity. Part I: uniaxial behavior. Int. J. Plasticity 8 (1992) 91-116
28. Hassan T., and Kyriakides S. Ratcheting of cyclically hardening and softening materials. Part I: uniaxial behavior. Int. J. Plasticity 10 (1994) 149-184
29. Hassan T., and Kyriakides S. Ratcheting of cyclically hardening and softening materials. Part II: multiaxial behavior. Int. J. Plasticity 10 (1994) 185-212
30. Hassan T., Corona E., and Kyriakides S. Ratcheting in cyclic plasticity. Part II: multiaxial behavior. Int. J. Plasticity 8 (1992) 117-146
31. Hassan T., Taleb L., and Krishna S. Influences of non-proportional loading paths on ratcheting responses and simulations by two recent cyclic plasticity models. Int. J. Plasticity 24 (2008) 1863-1889
32. Haupt P., and Kamlah M. Representation of cyclic hardening and softening properties using continuous variables. Int. J. Plasticity 11 (1995) 267-291
33. Hill R. Continuum micro-mechanisms of elastoplastic polycrystals. J. Mech. Phys. Solids 13 (1965) 89-101
34. Hlilou, A., Ben Naceur, I., Saï, K., Cailletaud, G., submitted for publication. Generalization of the polycrystalline beta-model: finite element assessment and application to softening material behaviour. Computational Materials Science.
35. Jiang Y., and Kurath P. Nonproportional cyclic deformation: critical experiments and analytical modeling. Int. J. Plasticity 13 (1997) 743-763
36. Jiang Y., and Sehitoglu H. Modeling of cyclic ratcheting plasticity. Part I: development of constitutive relations. ASME J. Appl. Mech. 63 (1996) 720-725
37. Jiang Y., and Sehitoglu H. Modeling of cyclic ratcheting plasticity. Part II: comparison of model simulations with experiments. ASME J. Appl. Mech. 63 (1996) 726-733
38. Jiang Y., and Zhang J. Benchmark experiments and characteristic cyclic plasticity deformation. Int. J. Plasticity 24 (2008) 1481-1515
39. Kanazawa K., Miller K.J., and Brown M.W. Cyclic deformation of 1% Cr-Mo-V steel under out-of-phase loads. Fatigue Eng. Mater. Struct. 2 (1979) 217-222
40. Kang G.Z., Gao Q., Cai L.X., Yang X.J., and Sun Y.F. Experimental study on the uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures. Nucl. Eng. Des. 216 (2002) 13-26
41. Kang G.Z., Gao Q., and Yang X.J. A visco-plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratcheting of SS304 stainless steel at room temperature. Mech. Mater. 34 (2002) 521-531
42. Kang G.Z., Ohno N., and Akira N. Constitutive modeling of strain range dependent cyclic hardening. Int. J. Plasticity 19 (2003) 1801-1819
43. Kang G.Z., Gao Q., and Yang X.J. Uniaxial and multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and visco-plastic constitutive model. Int. J. Non-linear Mech. 39 (2004) 843-857
44. Kang G.Z., Li Y.G., and Gao Q. Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures and its constitutive modeling. Mech. Mater. 37 (2005) 1101-1118
45. Kang G.Z., Kan Q., Zhang J., and Sun Y. Time-dependent ratcheting experiments of SS304 stainless steel. Int. J. Plasticity 22 (2006) 858-894
46. Krempl E., and Lu H. The hardening and rate-dependent behavior of fully annealed AISI type 304 stainless steel under biaxial in-phase and out-of-phase strain cycling at room temperature. J. Eng. Mater. Technol. 106 (1984) 376-382
47. Krishna, S., Hassan, T., submitted for publication. A novel backstress shift and time-dependence of the modified Chaboche model. Int. J. Solid Struct.
48. Kröner E. Zur plastischen verformung des vielkristalls. Acta Metall. 9 (1961) 155-161
49. Lamba H.S., and Sidebottom O.M. Cyclic plasticity for nonproportional paths. Parts 1 and 2: comparison with predictions of three incremental plasticity models. J. Eng. Mater. Technol. 100 (1978) 96-111
50. Landgraf R.W., Morrow J.-D., and Endo T. Determination of the cyclic stress-strain curve. J. Mater. - JMLSA 4 (1969) 176-188
51. Marquis, D., 1979. Etude théorique et vérification expérimentale d'un modèle de plasticité cyclique, Thèse Paris VI.
52. Mayama T., Sasaki K., and Ishikawa H. Biaxial rachetting deformation of type 304 stainless steel: effect of memorization of back stress. Proc. Inst. Mech. Eng. C 218 (2004) 901-908
53. McDowell D.L. A two surface model for transient nonproportional cyclic plasticity. ASME J. Appl. Mech. 52 (1985) 298-308
54. McDowell D.L. An evaluation of recent developments in hardening and flow rules for rate-independent, nonproportional cyclic plasticity. ASME J. Appl. Mech. 54 (1987) 323-334
55. McDowell D.L. Nonlinear kinematic hardening theory for cyclic thermoplasticity and thermoviscoplasticity. Int. J. Plasticity 8 (1992) 695-728
56. McDowell D.L. Modeling and experiments in plasticity. Int. J. Solid Struct. 37 (2000) 293-309
57. Méric L., Poubanne P., and Cailletaud G. Single crystal modeling for structural calculations. Part 1: Model presentation. J. Eng. Mater. Technol. 113 (1991) 162-170
58. Molinari A. Extensions of the self-consistent tangent model. Model. Simul. Mater. Sci. Eng. 7 (1999) 683-697
59. Moosbrugger J.C. Some developments in the characterization of material hardening and rate sensitivity for cyclic viscoplasticity models. Int. J. Plasticity 7 (1991) 405-431
60. Moosbrugger J.C. Experimental parameter estimation for nonproportional cyclic viscoplasticity: nonlinear kinematic hardening rules for two waspaloy microstructures at 650 °C. Int. J. Plasticity 9 (1993) 345-373
61. Nouailhas D., Cailletaud G., Policella H., Marquis D., Dufaily J., Lieurade H.P., Ribes A., and Bollinger E. On the description of cyclic hardening and initial cold working. Eng. Fract. Mech. 21 (1985) 887-895
62. Ohashi Y., Kawai M., and Kaito T. Inelastic behavior of type 316 stainless steel under multiaxial nonproportional cyclic stressings at elevated temperature. ASME J. Eng. Mater. Technol. 107 (1985) 101-109
63. Ohno N. A constitutive model of cyclic plasticity with a nonhardening strain region. ASME J. Appl. Mech. 49 (1982) 721-727
64. Ohno N. Recent topics in constitutive modeling of cyclic plasticity and viscoplasticity. Appl. Mech. Rev. 43 (1990) 283-295
65. Portier L., Calloch S., Marquis D., and Geyer P. Ratcheting under tension-torsion loadings: experiments and modelling. Int. J. Plasticity 16 (2000) 303-335
66. Rahman S.M., Hassan T., and Ranjithan R.S. Automated parameter determination of advanced constitutive models. ASME Pressure Vess. Piping Div. Publ. PVP 2 (2005) 261-272
67. Rahman S.M., Hassan T., and Corona E. Evaluation of cyclic plasticity models in ratcheting simulations of straight pipes under cyclic bending and steady internal pressure. Int. J. Plasticity 24 (2008) 1756-1791
68. Saï K., and Cailletaud G. Multi-mechanism models for the description of ratcheting: effect of the scale transition rule and of the coupling between hardening variables. Int. J. Plasticity 23 (2007) 1589-1617
69. Seyed-Ranjbari, M., 1986. Further development, multiaxial formulation, and implementation of the bounding surface plasticity model for metals, Ph.D. Dissertation, University of California, Davis.
70. Takahashi Y., and Ogata T. Description of nonproportional cyclic plasticity of stainless steel by a two surface model. J. Appl. Mech. 58 (1991) 623-630
71. Taleb L., Cailletaud G., and Blaj L. Numerical simulation of complex ratcheting tests with a multi-mechanism model type. Int. J. Plasticity 22 (2006) 724-753
72. Tanaka E. A nonproportionality parameter and a cyclic viscoplastic constitutive model taking into account amplitude dependences and memory effects of isotropic hardening. Eur. J. Mech. A 13 (1994) 155-173
73. Tanaka E., and Okuchi H. Constitutive modelling of viscoplasticity incorporating non-proportional hardening effects. Trans. Jpn. Soc. Mech. Eng. 54 (1988) 1588-1596
74. Tanaka E., Murukami S., and Ooka M. Effect of strain path shapes on non-proportional cyclic plasticity. J. Mech. Phys. Solids 33 (1985) 559-575
75. Tanaka E., Murukami S., and Ooka M. Effect of plastic strain amplitudes on non-proportional cyclic plasticity. Acta Mech. 57 (1985) 167-182
76. Zhang J., and Jiang Y. Constitutive modeling of cyclic plasticity deformation of a pure polycrystalline copper. Int. J. Plasticity 24 (2008) 1890-1915