Multiscale experimental investigations about the cyclic behavior of the 304L SS

International Journal of Plasticity

Volumn 25, Issue 7, 2009, Pages 1359-1385

  Taleb, Lakhdar ^a,b   Hauet, Annie ^a,b  

^a UNIVERSITÉ ET INSA DE ROUEN   (France)

^b Institute for Materials Research   (France)

Author keywords

Cyclic hardening softening; Cyclic plasticity; Microstructures; Non proportionality; Ratcheting

Indexed keywords

304L STAINLESS STEELS; AXIAL DIRECTIONS; CONTROLLED TESTS; CYCLIC BEHAVIORS; CYCLIC HARDENING/SOFTENING; CYCLIC HARDENINGS; CYCLIC PLASTICITY; CYCLIC PLASTICITY MODELS; CYCLIC SOFTENING; ELASTO PLASTICS; EXPERIMENTAL INVESTIGATIONS; HARDENING EFFECTS; HETEROGENEOUS STRUCTURES; HIGH DEFECT DENSITIES; LOADING PATHS; MACROSCOPIC BEHAVIORS; MAGNETIC MEASUREMENTS; MATERIAL ANISOTROPIES; MICROSTRUCTURAL INVESTIGATIONS; MULTI-SCALE; MULTIPLE SLIPS; NON-PROPORTIONAL LOADINGS; NON-PROPORTIONALITY; PHYSICAL PHENOMENON; PLASTIC STRAINS; RATCHETING; RELATIVE CONTRIBUTIONS; ROOM TEMPERATURES; STRAIN AMPLITUDES; STRAIN PATHS; TENSION COMPRESSIONS; TWIN FAULTS;

CYCLIC LOADS; DEFECT DENSITY; MAGNETIC ANISOTROPY; MAGNETIC FIELDS; MARTENSITE; MICROSTRUCTURE; SHEARING; STACKING FAULTS; STAINLESS STEEL; STRAIN HARDENING;

PLASTICITY;

EID: 64949089193     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.09.004     Document Type: Article

References (53)

1. Aubin, V., Bulthé A.-L., Degallaix S., Quaegebeur, P., 2003a. Ratcheting behavior of a duplex stainless steel: characterization and modeling. Proceedings ofthe 9th International Conference on the Mechanical Behavior of Materials, 25-29 May 2003, Genève, Suisse.
2. Aubin V., Quagebeur P., and Degallaix S. Cyclic plasticity of a duplex stainless steel under non-proportional loading. Mater. Sci. Eng. A 346 (2003) 208-215
3. Aubin V., Degallaix S., 2006, "Contribution of yield surface measurement to plastic behaviour modeling", Plasticity'06, Proceedings of the 12th International Symposium on Plasticity and its Current Applications, 17-22 July, Halifax, Nova Scotia, Canada.
4. Benallal A., and Marquis D. Constitutive equations for nonproportional cyclic elasto-viscoplasticity. ASME J. Eng. Mater. Technol. 109 (1987) 326-336
5. Benallal A., Le Gallo P., and Marquis D. An experimental investigation of cyclic hardening of 316 stainless steel and of 2024 aluminum alloy under multiaxial loading. Nucl. Eng. Des. 114 1989 (1989) 345-353
6. Bocher L., Delobelle P., Robinet P., and Feaugas X. Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension torsion internal and external pressure. Int. J. Plast. 17 (2001) 1491-1530
7. Byun T.S. On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels. Acta Mater. 51 (2003) 3063-3071
8. Cailletaud G., Kaczmarek H., and Policella H. Some elements on multiaxial behavior of 316L stainless steel at room temperature. Int. J. Mech. Mater. 3 (1984) 333-347
9. Chaboche J.L. A review of some plasticity and viscoplasticity constitutive theories. Int. J. Plast. 24 (2008) 1642-1693
10. Chen X., and Jiao R. Modified kinematic hardening rule for multiaxial ratchetting prediction. Int. J. Plast. 20 (2004) 871-898
11. De A.K., Murdock D.C., Mataya M.C., Speer J.G., and Matlock D.K. Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction. Scripta Mater. 50 (2004) 1445-1449
12. Delobelle P. Synthesis of the elastoviscoplastic behavior and modelization of an austenitic stainless steel over a large temperature range under uniaxial and biaxial loading: Part I. Behavior. Int. J. Plast. 9 (1993) 65-85
13. Delobelle P., Robinet P., and Bocher L. Experimental study and phenomenological modelization of ratcheting under uniaxial and biaxial loading on an austenitic stainless steel. Int. J. Plast. 11 (1995) 295-330
14. Dickson J.L., Boutin J., and Handfield L. A comparison of two simple methods for measuring cyclic internal and effective stresses. Mater. Sci. Eng. A64 (1984) L7-L11
15. Doquet V., and Pineau A. Extra hardening due to cyclic non-proportional loading of an austenitic stainless steel. Scripta Metallurgica et Materiala 24 (1990) 433-438
16. Doquet V. Twinning and multiaxial cyclic plasticity of a low stacking fault-energy FCC alloy. Acta Metall. 41 8 (1993) 2451-2459
17. Feaugas X. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress. Acta Mater. 47 (1999) 3617-3632
18. Feaugas X., and Gaudin C. Ratcheting process in the stainless steel AISI 316L at 300 K: an experimental investigation. Int. J. Plast. 20 (2004) 643-662
19. Feigenbaum H., and Dafalias Y.F. Directional distortional hardening in metal plasticity within thermodynamics. Int. J. Solids Struct. 44 (2007) 7526-7542
20. Fournier B., Sauzay M., Caës C., Noblecourt M., and Mottot M. Analysis of the hysteresis loops of a martensitic steel. Part I: Study of the influence of strain amplitude and temperature under pure fatigue loadings using an enhanced stress partitioning method. Mater. Sci. Eng. A 437 (2006) 183-196
21. Gaudin C., and Feaugas X. Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses. Acta Mater. 52 (2004) 3097-3110
22. Hassan T., and Kyriakides S. Ratcheting of cyclically hardening and softening materials, Part II: Multiaxial behavior. Int. J. Plast. 10 (1994) 185-212
23. Hassan T., Taleb L., and Krishna S. Influence of non-proportional loading paths on ratcheting responses and simulations by two recent cyclic plasticity models. Int. J. Plast. 24 (2008) 1863-1889
24. Hong S.G., Lee S.B., and Byun T.S. Temperature effect on the low-cycle fatigue behaviour of type 316L stainless steel: cyclic non-stabilization and an invariable fatigue parameter. Mater. Sci. Eng. A457 (2007) 139-147
25. Huang E.W., Barabash R.I., Wang Y., Clausen B., Li L., Liaw P.K., Ice G., Ren Y., Choo H., Pike L.M., and Klarstrom D.L. Plastic behavior of a nickel-based alloy under monotonic-tension and low-cycle-fatigue loading. Int. J. Plast. 24 (2008) 1440-1456
26. Humbert M., Petit B., Bolle B., and Gey N. Analysis of the γ-ε-α′ variant selection induced by 10% plastic deformation in 304 stainless steel at -60 °C. Mater. Sci. Eng. A 454-455 (2007) 508-517
27. Jiang Y., and Sehitoglu H. Cyclic ratcheting of 1070 steel under multiaxial stress state. Int. J. Plast. 10 (1994) 579-608
28. Jiang Y., and Zhang J. Benchmark experiments and characteristic cyclic plasticity deformation. Int. J. Plast. 24 (2008) 1481-1515
29. Kang G.Z., Gao Q., and Yang X.J. Uniaxial and nonproportional multiaxial ratchetting of SS304 stainless steel at room temperature: experiments and simulations. Int. J. Non-linear Mech. 39 (2004) 843-857
30. Kang G.Z., and Gao Q. Temperature-dependent cyclic deformation of S304 stainless steel under non-proportionally multiaxial load and its constitutive modeling. Key Eng. Mater. 274 (2004) 247-252
31. Kang G.Z., Li Y.G., and Gao Q. Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures and its constitutive modeling. Mech. Mater. 37 (2005) 1101-1118
32. Khan A.S., Chen X., and Abdel-Karim M. Cyclic multiaxial and shear finite deformation response of OFHC: Part I, experimental results. Int. J. Plast. 23 (2007) 1285-1306
33. Lissenden C.J., Doraiswamy D., and Arnold S.M. Experimental investigation of cyclic and time-dependent of titanium alloy at elevated temperature. Int. J. Plast. 23 (2007) 1-24
34. Mayama T., Sasaki K., and Ishikawa H. A constitutive model of cyclic viscoplasticity considering changes in subsequent viscoplastic deformation due to the evolution of dislocation structures. Int. J. Plast. 23 (2007) 915-930
35. McDowell D.L. Biaxial path dependence of deformation substructure of Type 304 stainless steel. Metall. Trans. 19A (1988) 1277-1293
36. Nouailhas D., Cailletaud G., Policella H., Marquis D., Dufailly J., Lieurade H.P., Ribes A., and Bollinger E. On the description of cyclic hardening and initial cold working. Eng. Fract. Mech. 21 (1985) 887-895
37. Olson G.B., and Cohen M. A mechanism for the strain-induced nucleation of martensitic transformation. J. Less-Common Metals 28 (1972) 107-118
38. Petit B., Gey N., Cherkaoui M., Bolle B., and Humbert M. Deformation behavior and microstructure/texture evolution of an annealed 304ASI stainless steel sheet. Experimental and micromechanical modeling. Int. J. Plast. 23 (2007) 323-341
39. Portier L., Calloch S., Marquis D., and Geyer P. Ratchetting under tension-torsion loadings: experiments and modelling. Int. J. Plast. 16 (2000) 303-335
40. Sai K., and Cailletaud G. Multi-mechanism models for the description of ratchetting: effect of the scale transition rule and of the coupling between hardening variables. Int. J. Plast. 23 (2007) 1589
41. Sauzay M. Analytical modeling of intragranular backstresses due to deformation-induced dislocation microstructures. Int. J. Plast. 24 (2008) 727-745
42. Staudhammer K.P., Murr L.E., and Hecker S.S. Nucleation and evolution of strain-induced martensitic (B.C.C.) embryos and substructure in stainless steel: a transmission electron microscope study. Acta Metall. 2 (1983) 267-274
43. Takahashi S., Echigoya J., Ueda T., Li X., and Hatafuku H. Martensitic transformation due to plastic deformation and magnetic properties in SUS 304 stainless steel. J. Mater. Proc. Tech. 108 (2001) 213-216
44. Taleb, L., Hassan, T., 2006. Influence of non proportionality on ratcheting response. In: Plasticity'06, 12th International Symposium on Plasticity and its Current Applications, 17-22 July, Halifax, Nova Scotia, Canada.
45. Taleb L., Cailletaud G., and Blaj L. Numerical simulation of complex ratcheting tests with a multi-mechanism model type. Int. J. Plast. 22 (2006) 724-753
46. Talonen J., and Hänninen H. Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels. Acta Mater. 55 (2007) 6108-6118
47. Tanaka E., Murukami S., and Ooka M. Effect of strain path shapes on non-proportional cyclic plasticity. J. Mech. Phys. Solids 33 (1985) 559-575
48. Tanaka E. A nonproportionality parameter and a cyclic viscoplastic constitutive model taking into account amplitude dependences and memory effects of isotropic hardening. Eur. J. Mech. A/Solids 13 (1994) 155-173
49. Vincent L., Calloch S., and Marquis D. A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratchetting. Int. J. Plast. 20 (2004) 1817-1850
50. Wolff M., and Taleb L. Consistency of two multi-mechanism models in isothermal plasticity. Int. J. Plast. 24 (2008) 2059-2083
51. Yaguchi M., and Takahashi Y. Ratchetting of viscoplastic material with cyclic softening: II. Application of constitutive models. Int. J. Plast. 21 (2005) 835-860
52. Ye D., Matsukoa S., Nagashima N., and Suzuki N. The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel. Mater. Sci. Eng. A 415 (2006) 104-117
53. Zhang L., Kamada Y., Kikuchi H., Mumtaz K., Ara K., Takahashi S., Sato M., and Tsukada T. Magnetic transition of some model alloys for simulating radiation-induced segregation in austenitic steel. J. Magn. Magn. Mater. 271 (2004) 402-408