An updated version of the multimechanism model for cyclic plasticity

International Journal of Plasticity

Volumn 26, Issue 6, 2010, Pages 859-874

  Taleb, Lakhdar ^a   Cailletaud, Georges ^b  

^a IRISA   (France)

^b PSL RESEARCH UNIVERSITY   (France)

Author keywords

Constitutive behavior; Cyclic loading; Mechanical testing; Metallic materials; Plastic collapse

Indexed keywords

CONSTITUTIVE BEHAVIORS; CYCLIC LOADING; CYCLIC LOADINGS; METALLIC MATERIAL; PLASTIC COLLAPSE;

CYCLIC LOADS; MATERIALS TESTING; MECHANICAL ENGINEERING; STAINLESS STEEL;

MECHANICAL TESTING;

EID: 77950371498     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2009.11.002     Document Type: Article

References (51)

1. Abdel-Karim M., and Ohno N. Kinematic hardening model suitable for ratcheting with steady-state. Int. J. Plast. 16 (2000) 225-240
2. Armstrong, P.J., Frederick, C.O., 1966.A Mathematical Representation of the Multiaxial Bauscinger Effect. CEGB Report No. RD/B/N 731, Berkely Nuclear Laboratories, Berkely, UK.
3. Aubin, V., Bulthé A.-L., Degallaix S., Quaegebeur, P., 2003a. Ratcheting behavior of a duplex stainless steel: characterization and modeling. In: Proceedings of the Ninth International Conference on the Mechanical Behavior of Materials, 25-29 May, Genève, Suisse.
4. Aubin V., Quagebeur P., and Degallaix S. Cyclic plasticity of a duplex stainless steel under non-proportional loading. Materials Science and Engineering, A 346 (2003) 208-215
5. Aubin V., Degallaix S., 2006, "Contribution of yield surface measurement to plastic behaviour modeling", Plasticity'06. In: Proceedings of the 12th International Symposium on Plasticity and its Current Applications, 17-2 July, Halifax, Nova Scotia, Canada.
6. Bari S., and Hassan T. Anatomy of coupled constitutive models for ratchetting simulation. Int. J. Plast. 16 (2000) 381-409
7. Bari S., and Hassan T. Kinematic hardening rules in uncoupled modeling for multiaxial ratchetting simulation. Int. J. Plast. 17 (2001) 885-905
8. Bari S., and Hassan T. An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation. Int. J. Plast. 18 (2002) 873-894
9. Benallal A., and Marquis D. Constitutive equations for nonproportional cyclic elasto-viscoplasticity. ASME J. Eng. Mater. Tech. 109 (1987) 326-336
10. Benallal A., Le Gallo P., and Marquis D. An experimental investigation of cyclic hardening of 316 stainless steel and of 2024 aluminum alloy under multiaxial loading. Nucl. Eng. Des. 114 1989 (1989) 345-353
11. Besson J., Leriche R., Foerch R., and Cailletaud G. Object-oriented programming applied to the finite element method. Part II. Application to material behaviors. Revue Européenne des Éléments Finis 7 5 (1998) 567-588
12. Bocher L., Delobelle P., Robinet P., and Feaugas X. Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension torsion internal and external pressure. Int. J. Plast. 17 (2001) 1491-1530
13. Burlet, H., Cailletaud, G., 1987. Modeling of Cyclic Plasticity in Finite Element Codes. In: Proceeding of the Second International Conference on Constitutive Laws for Engineering Materials: Theory and Applications, pp. 1157-1164.
14. Cailletaud G., Kaczmarek H., and Policella H. Some elements on multiaxial behavior of 316 L stainless steel at room temperature. Int. J. Mechan. Mater. 3 (1984) 333-347
15. Cailletaud G., and Sai K. Study of plastic/viscoplastic models with various inelastic mechanisms. Int. J. Plast. 11 (1995) 991-1005
16. Chaboche, J.L., Dang-Van, K., Cordier, G., 1979. Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel. In: Proceedings of the Fifth International Conference on SMiRT, Div. L, Berlin, Germany.
17. Chaboche J.L. A review of some plasticity and viscoplasticity constitutive theories. Int. J. Plast. 24 (2008) 1642-1693
18. Chen X., and Jiao R. Modified kinematic hardening rule for multiaxial ratchetting prediction. Int. J. Plast. 20 (2004) 871-898
19. Chen X., and Kim K.S. Modeling of ratcheting behavior under multiaxial cyclic loading. Acta Mech. 163 (2003) 9-23
20. Feaugas X., and Gaudin C. Ratcheting process in the stainless steel AISI 316L at 300 K: an experimental investigation. Int. J. Plast. 20 (2004) 643-662
21. Feigenbaum H., and Dafalias Y.F. Directional distortional hardening in metal plasticity within thermodynamics. Int. J. Solids Struct. 44 (2007) 7526-7542
22. Gaudin C., and Feaugas X. Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses. Acta Mater. 52 (2004) 3097-3110
23. Hassan T., Taleb L., and Krishna S. Influences of non-proportional loading paths on ratcheting responses and simulations by two recent cyclic plasticity models 24 (2008) 1863-1889
24. Jiang Y., and Zhang J. Benchmark experiments and characteristic cyclic plasticity deformation. Int. J. Plast. 24 (2008) 1481-1515
25. Kang G.Z., Gao Q., Yang X.J., and Sun Y.F. An experimental study on uniaxial and multiaxial strain cyclic characteristics and ratchetting of 316L stainless steel. J. Mater. Sci. Technol. 17 (2001) 219-223
26. Kang G.Z., Gao Q., Cai L.X., Yang X.J., and Sun Y.F. Experimental study on the uniaxial and nonproportionally multiaxial ratchetting of SS304 stainless steel at room and high temperatures. Nucl. Eng. Des. 216 (2002) 13-26
27. Kang G.Z., Gao Q., and Yang X.J. A visco-plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratchetting of SS304 stainless steel at room temperature. Mech. Mater. 34 (2002) 521-531
28. Kang G.Z., Gao Q., and Yang X.J. Uniaxial and nonproportional multiaxial ratchetting of SS304 stainless steel at room temperature: experiments and simulations. Int. J. Non-linear Mech. 39 (2004) 843-857
29. Kang G.Z., and Gao Q. Temperature-dependent cyclic deformation of S304 stainless steel under non-proportionally multiaxial load and its constitutive modeling. Key Eng. Mater. 274 (2004) 247-252
30. Kang G.Z., Li Y.G., and Gao Q. Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures and its constitutive modeling. Mech. Mater. 37 (2005) 1101-1118
31. Khan A.S., Chen X., and Abdel-Karim M. Cyclic multiaxial and shear finite deformation response of OFHC: Part I. Experimental results. Int. J. Plast. 23 (2007) 1285-1306
32. Kobayashi M., and Ohno N. Implementation of cyclic plasticity models based on a general form of kinematic hardening. Int. J. Numer. Meth. Eng. 53 (2002) 2217-2238
33. Krishna S., Hassan T., Ben Naceur I., Sai K., and Cailletaud G. Macro versus micro-scale constitutive models in simulating proportional and non-proportional cyclic and ratcheting responses of stainless steel 304. Int. J. Plast. 25 (2009) 1910-1949
34. Lissenden C.J., Lerch B., Ellis J.R., and Robinson D.N. Experimental determination of yield and flow surfaces under axial-torsional loading. ASTM 1280 (1997) 92-112
35. Lissenden C.J., and Lei X. A more comprehensive method for yield locus construction for metallic alloys and composites. Soc. Exp. Mechan. 44 (2004) 10-20
36. Moreton D.N., Moffat D.G., and Parkinson D.B. The yield surface behavior of pressure vessel steels. J. Strain Anal. 16 2 (1981) 127
37. Mayama T., Sasaki K., and Ishikawa H. A constitutive model of cyclic viscoplasticity considering changes in subsequent viscoplastic deformation due to the evolution of dislocation structures. Int. J. Plast. 23 (2007) 915-930
38. Nouailhas D., Cailletaud G., Policella H., Marquis D., Dufailly J., Lieurade H.P., Ribes A., and Bollinger E. On the description of cyclic hardening and initial cold working. Eng. Fract. Mechan. 21 (1985) 887-895
39. Ohno N., and Abdel-Karim M. Uniaxial ratcheting of 316FR steel at room temperature, part II: constitutive modeling and simulation. ASME J. Eng. Mater. Tech. 122 (2000) 35-41
40. Portier L., Calloch S., Marquis D., and Geyer P. Ratchetting under tension-torsion loadings: experiments and modelling. Int. J. Plast. 16 (2000) 303-335
41. Sai K., and Cailletaud G. Multi-mechanism models for the description of ratchetting: effect of the scale transition rule and of the coupling between hardening variables. Int. J. Plast. 23 (2007) 1589
42. Taleb L., Cailletaud G., and Blaj L. Numerical simulation of complex ratcheting tests with a multi-mechanism model type. Int. J. Plast. 22 (2006) 724-753
43. Taleb L., and Hauet L. Multiscale experimental investigations about the cyclic behavior of the 304L SS. Int. J. Plast. 25 (2009) 1359-1385
44. Taleb, L., Cailletaud, G., 2009. On the cyclic behavior of steels under non-proportional loading paths. Plasticity'09. In: International Symposium on Plasticity and its Current Applications, January 3-8, St. Thomas, USVI, USA.
45. Tanaka E. A nonproportionality parameter and a cyclic viscoplastic constitutive model taking into account amplitude dependences and memory effects of isotropic hardening. Eur. J. Mech., A/Solids 13 (1994) 155-173
46. Vincent L., Calloch S., Kurtyka T., and Marquis D. An improvement of multiaxial ratcheting modeling via yield surface distortion. J. Eng. Mater. Technol. 124 (2002) 402-411
47. Vincent L., Calloch S., and Marquis D. A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratcheting. Int. J. Plast. 20 (2004) 1817-1850
48. Wolff M., and Taleb L. Consistency of two multi-mechanism models in isothermal plasticity. Int. J. Plast. 24 11 (2008) 2059-2083
49. Yaguchi M., and Takahashi Y. Ratchetting of viscoplastic material with cyclic softening: II. Application of constitutive models. Int. J. Plast. 21 (2005) 835-860
50. Yoshida F. A constitutive model of cyclic plasticity. Int. J. Plast. 16 (2000) 359-380
51. Yoshida F., and Uemori T. A model for large strain cyclic plasticity describing the Bauschinger effect and work hardening stagnation. Int. J. Plast. 18 (2002) 661-686