A combined isotropic-kinematic hardening model for the simulation of warm forming and subsequent loading at room temperature

International Journal of Plasticity

Volumn 26, Issue 1, 2010, Pages 126-140

  Berisha, Bekim ^a   Hora, Pavel ^a   Wahlen, Arne ^a   Tong, Longchang ^a  

^a ETH ZURICH   (Switzerland)

Author keywords

Dynamic strain aging; Medium carbon steel; Nonlinear kinematic hardening; Orthogonal loading; Parameter identification

Indexed keywords

DYNAMIC STRAIN AGING; MEDIUM CARBON STEEL; NONLINEAR KINEMATIC HARDENING; ORTHOGONAL LOADING; PARAMETER IDENTIFICATION;

CARBON STEEL; DEFORMATION; KINEMATICS; PARAMETER ESTIMATION; STRAIN HARDENING;

SIMULATORS;

EID: 70350710325     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2009.06.001     Document Type: Article

References (51)

1. Abdel-Karim M., and Ohno N. Kinematic hardening model suitable for ratcheting with steady state. International Journal of Plasticity 16 (2000) 225-240
2. Abdel-Malek S., and Meyer L.W. Modelling of the flow stress and description of the ductile failure in a wide range of strain rates. Materialwissenschaft und Werkstofftechnik (2007) 10.1002/mawe.200600098
3. Ait-Amokhtar H., Fressengeas C., and Boudrahem s. The dynamics of Portevin-Le Chatelier bands in an Al-Mg alloy from infrared thermography. Materials Science and Engineering A 488 (2008) 540-546
4. Anon, N. 1990. Elevated-temperature properties of ferritic steels. In: Steiner, R. (Ed.), American Society for Metals ASM Handbook 1, pp. 617-652.
5. Armstrong, P.J., Frederick, C.O. 1966. A mathematical representation of the multiaxial Bauschinger Effect (CEGB Report RD/B/N/731). Berkeley Laboratories, R&D Department, CA.
6. Bailey J.E., and Hirsch P.B. The dislocation distribution, flow stress and stored energy in cold-worked polycrystalline silver. Philosophical Magazine 5 (1960) 485-497
7. Bari S., and Hassan T. Anatomy of coupled constitutive models for ratcheting simulation. International Journal of Plasticity 16 (2000) 381-409
8. Bari S., and Hassan T. An advancement in cyclic plasticity modeling for mulitaxial ratcheting simulation. International Journal of Plasticity 18 (2002) 873-894
9. Bergström Y. A dislocation model for the stress-strain behaviour of polykristalline alpha-Fe with special emphasis on the variation of the densities of the mobile and immobile dislocations. Material Science and Engineering 5 (1969) 193-200
10. Bergström Y. The plastic deformation of metals - A dislocation model and its applicability. Reviews on Powder Metallurgy and Physical Ceramics 2 (1983) 79-265
11. Berisha B., Hora P., Wahlen A., and Tong L. A dislocation based material model for warm forming simulation. International Journal of Material Forming (2008) 10.1007/s12289-008-0367-7
12. Berisha, B., Hora, P., Tong, L., Wahlen, A., Van den Boogaard, A.H. 2008b. Modeling of dynamic strain aging with a dislocation-based isotropic hardening model and investigation of orthogonal loading. In: 9th International Conference on Technology of Plasticity, pp. 185-186.
13. Chaboche J.L. Time-independent constitutive theories for cyclic plasticity. International Journal of Plasticity 2 (1986) 149-188
14. Chaboche J.L. Constitutive equations for cyclic plasticity and cyclic viscoplasticity. International Journal of Plasticity 5 (1989) 247-302
15. Chaboche J.L. On some modifications of kinematic hardening to improve the description of ratchetting effects. International Journal of Plasticity 7 (1991) 661-678
16. Chaboche J.L. Cyclic viscoplastic constitutive equations. Parts I and II. Journal of Applied Mechanics 60 (1993) 813-828
17. Chaboche J.L. A review of some plasticity and viscoplasticity constitutive theories. International Journal of Plasticity 24 (2008) 1642-1683
18. Chen X., Jiao R., and Kim K.S. On the Ohno-Wang kinematic hardening rules for multiaxial ratchetting modeling of medium carbon steel. International Journal of Plasticity 21 (2005) 161-184
19. Curtin W.A., Olmsted D.L., and Hector L.G. A predictive mechanism for dynamic strain ageing in aluminium-magnesium alloys. Nature Materials (2006) doi:10.1038/nmat1765
20. Feaugas X. On the region of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress. Acta Materialia 47 (1999) 3617-3632
21. Fressengeas C., Beaudoin A.J., Lebyodkin M., Kubin L.P., and Estrin Y. Dynamic strain aging: a coupled dislocation - solute dynamic model. Materials Science and Engineering A 400-401 (2005) 226-230
22. Gündüz S. Dynamic strain ageing effects in niobium microalloyed steel. Ironmak Steelmak (2002) 10.1179/030192302225004575
23. Hartmann G. Comparison of the uniaxial behavior of the inelastic constitutive models of Miller and Walker by numerical experiments. International Journal of Plasticity 6 (1990) 189-206
24. Hasegawa T., Yakou T., and Karashima S. Deformation behaviour and dislocation structures upon stress reversal in polycrystalline aluminum. Material Science Engineering 20 (1975) 267-276
25. Jiang H., Zhang Q., Chen X., Chen Z., Jiang Z., Wu X., and Fan J. Three types of Portevin-Le Chatelier effects: experiment and modelling. Acta Materialia 55 (2007) 2219-2228
26. Jiang Y., and Sehitoglu H. Modeling of cyclic ratchetting plasticity. Part I: development of constitutive relations. Journal of Applied Mechanics 63 (1996) 720-725
27. Jiang Y., and Zhang J. Benchmark experiments and characteristic cyclic plasticity deformation. International Journal of Plasticity 24 (2008) 1481-1515
28. Kang G., Li Y., and Gao Q. Non-proportionally multiaxial ratchetting of cyclic hardening materials at elevated temperatures: experiments and simulations. Mechanics of Materials 37 (2005) 1101-1118
29. Khan A.S., and Huang S. Continuum Theory of Plasticity (1995), A Wiley-Interscience Publicaton, John Wiley&Sons, New York
30. Khan A.S., Kazmi R., and Farrokh B. Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide range of strain rates and temperatures. International Journal of Plasticity 23 (2007) 931-950
31. In: Krausz A.S., and Krausz K. (Eds). Unified Constitutive Laws of Plastic Deformation (1996), Academic Press Inc.
32. Lemaitre J., and Chaboche J.L. Mechanics of Solid Materials (2002), Cambridge University Press, Cambridge
33. Mecking H., and Kocks U.F. Kinetics of flow and strain-hardening. Acta Metallurgica 29 (1981) 1865-1875
34. Miller A.K. The MATMOD Equations (1987), Elsevier Applied Science Publishers
35. In: Miller A.K. (Ed). Unified Constitutive Equations for Plastic Deformation and Creep of Engineering Alloys (1987), Elsevier Applied Science Publishers 139-219
36. Mücke R., and Bernhardi O.E. On temperature rate terms for viscoplastic constitutive models with applications to hight temperature materials. Computer Methods in Applied Mechanics and Engineering 195 (2006) 2411-2431
37. Nemat-Nasser S. Plasticity (2004), Cambridge University Press, Cambridge
38. Ohno N., Takahashi Y., and Kuwabara K. Constitutive modeling of anisothermal cyclic plasticity of 304 stainless steel. ASME Journal of Engineering Materials and Technology 111 (1989) 106-114
39. Ohno N., and Wang J.D. Kinematic hardening rules with critical state of dynamic recovery. Part I: formulation and basic features for ratchetting behavior. International Journal of Plasticity 9 (1993) 375-390
40. Omerspahic E., Mattiasson K., and Enquist B. Identification of material hardening parameters by three-point bending of metal sheets. International Journal of Mechanical Sciences 48 (2006) 1525-1532
41. Peeters B., Seefeldt M., Teodosiu C., Kalidindi S.R., Van Houtte P., and Aernoudt E. Work hardening/softening behaviour of bcc polycrystals during changing strain paths: I. Acta Materialia 49 (2001) 1607-1619
42. Prager W. A new method of analyzing stresses and strains in work-hardening plastic solids. Journal of Applied Mechanics ASME 23 (1956) 493-496
43. Rahman S.M., Hassan T., and Corona E. Evaluation of cyclic plasticity models in ratchetting simulation of straight pipes under cyclic bending and steady internal pressure. International Journal of Plasticity 24 (2008) 1756-1791
44. Roy A.K., Kumar P., and Maitra D. Dynamic strain ageing of P91 grade steels of varied silicon content. Materials Science and Engineering A 499 (2009) 379-386
45. Sai K., and Cailletaud G. Multi-mechanism models for the description of ratchetting: effect of the scale transition rule and of the coupling between hardening variables. International Journal of Plasticity 23 (2007) 1589-1617
46. Taleb L., Cailletaud G., and Blaj L. Numerical simulation of complex ratcheting tests with a multi-mechanism model type. International Journal of Plasticity 22 (2006) 724-753
47. Van Liempt P., Onink M., and Bodin A. Modelling the influence of dynamic strain ageing on deformation behaviour. Advanced Engineering Materials 4 4 (2002) 225-232
48. Voyiadjis G.Z., and Abu Al-Rub R.K. Thermodynamic based model for the evolution equation of the backstress in cyclic plasticity. International Journal of Plasticity 19 (2003) 2121-2147
49. Yoshida F., and Uemori T. A model for large-strain plasticity describing the Bauschinger effect and workhardening stagnation. International Journal of Plasticity 18 (2002) 661-686
50. Zeghib N.E., and Klepaczko J.R. Work hardening of mild steel within dynamic strain ageing temperatures. Journal of Materials Science 31 (1996) 6085-6088
51. Zisman A., Teodosiu C., and Rybin V. Micromechanics of shear microbands under strain-path changes in mild steel. Computational Materials Science 16 (1999) 307-314