Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure

International Journal of Plasticity

Volumn 24, Issue 10, 2008, Pages 1756-1791

  Rahman, Syed M ^a   Hassan, Tasnim ^a   Corona, Edmundo ^b  

^a North Carolina State University   (United States)

^b University of Notre Dame   (United States)

Author keywords

Cyclic plasticity; Ratcheting; Simulations; Straight pipe

Indexed keywords

BENDING (DEFORMATION); CRYSTALLOGRAPHY; CYCLIC LOADS; DYNAMIC LOADS; ELASTICITY; GENETIC ALGORITHMS; PIPE; PLASTICITY; PLASTICS; PRESSURE; SENSITIVITY ANALYSIS; STEEL RESEARCH;

(R ,S)-SYMMETRIC; CHABOCHE MODEL; CYCLIC BENDING; CYCLIC PLASTICITY; CYCLIC PLASTICITY MODELS; ELSEVIER (CO); FINITE ELEMENT (FE) PACKAGE; INTERNAL PRESSURE (IP); LOW-CYCLE FATIGUE (LCF); MATERIAL RESPONSE; MODEL EVALUATION; MODEL PARAMETERS; PARAMETER SENSITIVITIES; PARAMETER VALUES; STRAIGHT PIPES; STRUCTURAL FEATURES;

FINITE ELEMENT METHOD;

EID: 47049087010     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.02.010     Document Type: Article

References (53)

1. Abdel Karim M., and Ohno N. Kinematic hardening model suitable for ratcheting with steady-state. Int. J. Plasticity 16 (2000) 225-240
2. ANSYS Release 5.1, 1995. Swanson Analysis System, Inc., Houston, PA 15342.
3. Armstrong, P.J., Frederick, C.O., 1966. A mathematical representation of the multiaxial Bauchinger effect. CEGB Report No. RD/BN 731.
4. Bari S., and Hassan T. Anatomy of coupled constitutive models for ratcheting simulation. Int. J. Plasticity 16 (2000) 381-409
5. Bari S., and Hassan T. kinematic hardening rules in uncoupled modeling for multiaxial ratcheting simulation. Int. J. Plasticity 17 (2001) 885-905
6. Bari S., and Hassan T. An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation. Int. J. Plasticity 18 (2002) 873-894
7. Bertero V.V., and Popov E.P. Effect of large alternating strains of steel beams. ASCE J. Struct. Div. 91 (1965) 1-12
8. Besseling J.F. A theory of elastic, plastic and creep deformations of an initially isotropic material. J. Appl. Mech. 25 (1958) 529-536
9. Cailletaud G., and Sai K. A polycrystalline model for the description of ratcheting: effect of intragranular and intragranular hardening. Mat. Sci. Eng. A. 480 (2008) 24-39
10. Chaboche J.L. Time independent constitutive theories for cyclic plasticity. Int. J. Plasticity 2 (1986) 149-188
11. Chaboche J.L. On some modifications of kinematic hardening to improve the description of ratcheting effects. Int. J. Plasticity 7 (1991) 661-678
12. Chaboche J.L. Modeling of ratcheting: evaluation of various approaches. Eur. J. Mech. A: Solid 13 (1994) 501-518
13. Chaboche, J.L., Dang-Van, K., Cordier, G., 1979. Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel. In: Proceedings of the 5th International Conference on SMiRT, Div. L, Berlin, Germany.
14. Chen X., and Jiao R. Modified kinematic hardening rule for multiaxial ratcheting prediction. Int. J. Plasticity 20 (2003) 871-898
15. Corona E., and Kyriakides S. An experimental investigation of the degradation and buckling of circular tubes under cyclic bending and external pressure. Thin-Walled Struct. 12 (1991) 229-263
16. Corona E., Hassan T., and Kyriakides S. On the performance of kinematic hardening rules in predicting a class of biaxial ratcheting histories. Int. J. Plasticity 12 (1996) 117-145
17. DeGrassi, G., Hofmayer, C., Murphy, A., Suzuki, K., Namita, Y., 2003. BNL non-linear pre-test seismic analysis for the NUPEC ultimate strength piping test program. In: Proceedings of the SMiRT 17, Prague, Czech Republic, Paper K255.
18. EERI. Northridge Earthquake, January 17, 1994, Preliminary Reconnaissance Report (1995), Earthquake Engineering Research Institute
19. Ellison M.S., and Corona E. Buckling of T-beams under cyclic bending. Int. J. Mech. Sci. 40 (1998) 835-855
20. EPRI. Draft Final Report on the Piping and Fitting Dynamic Reliability Research (1992), Electric Power Research Institute, Palo Alto, CA (Restricted access)
21. Gosselin, S., 1994. Proposed ASME section XI philosophy related to operating plant fatigue protection. Welding Research Council Progress Report.
22. Hassan T., and Kyriakides S. Ratcheting in cyclic plasticity, part I: uniaxial behavior. Int. J. Plasticity 8 (1992) 91-116
23. Hassan T., and Kyriakides S. Ratcheting of cyclically hardening and softening materials, part I: multiaxial behavior. Int. J. Plasticity 10 (1994) 149-184
24. Hassan T., and Kyriakides S. Ratcheting of cyclically hardening and softening materials, part II: multiaxial behavior. Int. J. Plasticity 10 (1994) 185-212
25. Hassan T., Corona E., and Kyriakides S. Ratcheting in cyclic plasticity, part II: multiaxial behavior. Int. J. Plasticity 8 (1992) 117-146
26. Hassan T., Zhu Y., and Matzen V.C. Improved ratcheting analysis of piping components. Int. J. Press. Vessel Pip. 75 (1998) 643-652
27. Ishikawa H., and Sasaki K. Yield surfaces of SUS 304 under cyclic loading. J. Eng. Mater. Technol. 110 (1988) 365-371
28. Jhansale H.R. A new parameter for the hysteretic stress-strain behavior of metals. J. Eng. Mater. Technol. (1975) 33-38
29. Jiang Y., and Sehitoglu H. Comments on the Mroz multiple surface type plasticity models. Int. J. Solid Struct. 33 (1996) 1053-1068
30. Kan Q.H., Kang G.Z., and Zhang J. A unified visco-plastic constitutive model for uniaxial time-dependent ratcheting and its finite element implementation. Theo. Appl. Fract. Mech. 47 (2007) 133-144
31. Kang G.Z., and Gao Q. Uniaxial and non-proportionally multiaxial ratcheting of U71Mn rail steel: experiments and simulations. Mech. Mater. 34 (2002) 809-820
32. Kang G.Z., Li Y.G., and Gao Q. Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures and its constitutive modeling. Mech. Mater. 37 (2005) 1101-1118
33. Kang G.Z., Kan Q., Zhang J., and Sun Y. Time-dependent ratcheting experiments of SS304 stainless steel. Int. J. Plasticity 22 (2006) 858-894
34. Kulkarni S.C., Desai Y.M., Kant T., Reddy G.R., Parulekar Y., and Vaze K.K. Uniaxial and biaxial ratcheting studies of SA 333 Gr. 6 at room temperature. Int. J. Press Vessel Pip. 80 (2003) 179-185
35. Kulkarni S.C., Desai Y.M., Kant T., Reddy G.R., Prasad P., Vaze K.K., and Gupta C. Uniaxial and biaxial ratcheting in piping materials-experiments and analysis. Int. J. Press Vessel Pip. 81 (2004) 609-617
36. Kyriakides S., and Shaw P.K. Inelastic buckling of tubes under cyclic bending. ASME J. Press. Vessel Tech. 109 (1987) 169-178
37. Lu, X., 2003. Influence of residual stress on fatigue failure of welded joints. Ph.D. Thesis, North Carolina State University.
38. Masing, G., 1926. Eigenspannungen und Verfestingung beim Messing. In: Proceedings of the Second International Congress of Applied Mechanics, pp. 332-335.
39. Mayama T., Sasaki K., and Ishikawa H. Biaxial ratcheting deformation of type 304 stainless steel: effect of memorization of back stress. J. Mech. Eng. Sci. 218 (2004) 901-908
40. Morrow, J., 1965. Cyclic plastic strain energy in fatigue of metals. In: Proceedings of the Symposium on Internal Friction Damping in Cyclic Plasticity, ASTM STP, 378, pp. 45-87.
41. Ohno, N., 1997. Current state of the art in constitutive modeling for ratcheting. In: Proceedings of the 14th International Conference on SMiRT, Lyon, France, pp. 201-212.
42. Ohno N., and Wang J.D. Kinematic hardening rules with critical state of dynamic recovery, part I: formulations and basic features for ratcheting behavior. Int. J. Plasticity 9 (1993) 375-390
43. Owen R.J., Prakash A., and Zienkiewicz O.C. Finite Element Analysis of Non-linear Composite Materials by Use of Overlay Systems, Computer Structure (1974), Pergamon Press pp. 1251-1267
44. Prager W. A new method of analyzing stresses and strains in work hardening plastic solids. J. Appl. Mech. 23 (1956) 493-496
45. Rahman, S.M., 2006. Finite element analysis and related numerical schemes for ratcheting simulation. Ph.D. Dissertation, North Carolina State University.
46. Rider R.J., Harvey S.J., and Chandler H.D. Fatigue and ratcheting interactions. Int. J. Fatigue 17 (1995) 507-511
47. Sai K., and Cailletaud G. Multimechanism models for the description of ratcheting: effect of the scale transition rule and of the coupling between hardening variables. Int. J. Plasticity 23 (2007) 1589-1617
48. Shaw P.K., and Kyriakides S. Inelastic analysis of thin-walled tubes under cyclic bending. Int. J. Solid Struct. 21 (1985) 1073-1100
49. Tuegel E.J. Measurements of kinematic and isotropic hardening in 304 stainless steel during cyclic deformations. Res. Mech. 22 (1987) 65-78
50. Vaze S.P., and Corona E. Degradation and collapse of square tubes under cyclic bending. Thin Walled Struct. 31 (1998) 325-341
51. Vincent L., Calloch S., and Marquis D. A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratcheting. Int. J. Plasticity 20 (2004) 1817-1850
52. Wei E., Postberg B., Nicak T., and Rudolph J. Simulation of ratcheting and low cycle fatigue. Int. J. Pres. Vessel Pip. 81 (2004) 235-242
53. Yin S., Corona E., and Ellison M.S. Degradation and buckling of I-Beams under cyclic pure bending. ASCE J. Eng. Mech. 130 (2004) 809-817