Analytical and 3D finite element study of the deflection of an elastic cantilever bilayer plate

Journal of Applied Mechanics, Transactions ASME

Volumn 78, Issue 1, 2011, Pages 0110081-0110087

  Chekchaki, M ^a   Lazarus, V ^a   Frelat, J ^a  

^a CNRS   (France)

Author keywords

[No Author keywords available]

Indexed keywords

3D FINITE ELEMENT; ANALYTICAL FORMULAS; BI-LAYER; BI-LAYER PLATES; CANTILEVER PLATE; FINITE ELEMENT CALCULATIONS; LINEAR ELASTIC; MECHANICAL STRESS; MECHANICAL SYSTEMS; NUMERICAL RESULTS; PLATE GEOMETRY; PRESTRESSES; THREE-DIMENSIONAL ELASTICITY; VERY THIN FILMS; VOLUME VARIATION;

DEFLECTION (STRUCTURES); NANOCANTILEVERS; THERMOELECTRICITY; THIN FILMS; THREE DIMENSIONAL;

STRESSES;

EID: 78249271688     PISSN: 00218936     EISSN: 15289036     Source Type: Journal    
DOI: 10.1115/1.4002306     Document Type: Article

References (29)

1. Stoney, G. G., 1909, "The Tension of Metallic Films Deposited by Electrolysis", Proc. R. Soc. London, Ser. A, 82(553), pp. 172-175.
2. Rosakis, A. J., Singh, R. P., Tsuji, Y., Kolawa, E., and Moore, N. R., 1998, "Full Field Measurements of Curvature Using Coherent Gradient Sensing: Application to Thin Film Characterization", Thin Solid Films, 325 (1-2), pp. 42-54.
3. Petersen, C., Heldmann, C., and Johannsmann, D., 1999, "Internal Stresses During Film Formation of Polymer Latices", Langmuir, 15(22), pp. 7745-7751.
4. Tirumkudulu, M. S., and Russel, W. B., 2005, "Cracking in Drying Latex Films", Langmuir, 21(11), pp. 4938-4948.
5. Guisbiers, G., Strehle, S., and Wautelet, M., 2005, "Modeling of Residual Stresses in Thin Films Deposited by Electron Beam Evaporation", Microelectron. Eng., 82 (3-4), pp. 665-669.
6. Gravier, S., Coulombier, M., Safi, A., Andre, N., Boe, A., Raskin, J.-P., and Pardoen, T., 2009, "New On-Chip Nanomechanical Testing Laboratory-Applications to Aluminum and Polysilicon Thin Films", J. Microelectromech. Syst, 18(3), pp. 555-569.
7. Flinn, P., Gardner, D., and Nix, W., 1987, "Measurement and Interpretation of Stress in Aluminum-Based Metallization as a Function of Thermal History", IEEE Trans. Electron Devices, 34(3), pp. 689-699.
8. Freund, L. B., and Suresh, S., 2004, Thin Film Materials: Stress, Defect Formation and Surface Evolution, Cambridge University, Cambridge, UK.
9. Ngo, D., Feng, X., Huang, Y., Rosakis, A. J., and Brown, M. A., 2007, "Thin Film/Substrate Systems Featuring Arbitrary Film Thickness and Misfit Strain Distributions. Part I: Analysis for Obtaining Film Stress From Non-Local Curvature Information", Int. J. Solids Struct., 44(6), pp. 1745-1754. (Pubitemid 46161513)
10. Feng, X., Huang, Y., and Rosakis, A. J., 2007, "On the Stoney Formula for a Thin Film/Substrate System With Nonuniform Substrate Thickness", ASME J. Appl. Mech., 74(6), pp. 1276-1281.
11. Shen, Y L., Suresh, S., and Blech, I. A., 1996, "Stresses, Curvatures, and Shape Changes Arising From Patterned Lines on Silicon Wafers", J. Appl. Phys., 80(3), pp. 1388-1398.
12. Wikström, A., Gudmundson, P., and Suresh, S., 1999, "Thermoelastic Analysis of Periodic Thin Lines Deposited on a Substrate", J. Mech. Phys. Solids, 47(5), pp. 1113-1130.
13. Salamon, N. J., and Masters, C. B., 1995, "Bifurcation in Isotropic Thin-Film Substrate Plates", Int. J. Solids Struct., 32 (3-4), pp. 473-481.
14. Freund, L. B., 2000, "Substrate Curvature Due to Thin Film Mismatch Strain in the Nonlinear Deformation Range", J. Mech. Phys. Solids, 48 (6-7), pp. 1159-1174.
15. Zhang, Y., and Zhao, Y P., 2006, "Applicability Range of Stoney's Formula and Modified Formulas for a Film/Substrate Bilayer", J. Appl. Phys., 99(5), p. 053513.
16. Janssen, G., Abdalla, M., van Keulen, F., Pujada, B., and van Venrooy, B., 2009, "Celebrating the 100th Anniversary of the Stoney Equation for Film Stress: Developments From Polycrystalline Steel Strips to Single Crystal Silicon Wafers", Thin Solid Films, 517(6), pp. 1858-1867.
17. Huang, Y., and Rosakis, A. J., 2005, "Extension of Stoney's Formula to Non-Uniform Temperature Distributions in Thin Film/Substrate Systems. The Case OF Radial Symmetry", J. Mech. Phys. Solids, 53(11), pp. 2483-2500.
18. Ngo, D., Huang, Y., Rosakis, A. J., and Feng, X., 2006, "Spatially Non-Uniform, Isotropic Misfit Strain in Thin Films Bonded on Plate Substrates: The Relation Between Non-Uniform Film Stresses and System Curvatures", Thin Solid Films, 515(4), pp. 2220-229.
19. Huang, Y., and Rosakis, A. J., 2007, "Extension of Stoney's Formula to Arbitrary Temperature Distributions in Thin Film/Substrate Systems", ASME J. Appl. Mech., 74(6), pp. 1225-1233.
20. Feng, X., Huang, Y., and Rosakis, A. J., 2008, "Stresses in a Multilayer Thin Film/Substrate System Subjected to Nonuniform Temperature", ASME J. Appl. Mech., 75(2), p. 021022.
21. Feng, X., Huang, Y., and Rosakis, A., 2008, "Multi-Layer Thin Films/Substrate System Subjected to Non-Uniform Misfit Strains", Int. J. Solids Struct., 45(13), pp. 3688-3698.
22. Freund, L. B., Floro, J. A., and Chason, E., 1999, "Extensions of the Stoney Formula for Substrate Curvature to Configurations With Thin Substrates or Large Deformations", Appl. Phys. Lett., 74(14), pp. 1987-1989.
23. Klein, C. A., 2000, "How Accurate are Stoney's Equation and Recent Modifications", J. Appl. Phys., 88(9), pp. 5487-5489.
24. Guyot, N., Harmand, Y., and Mézin, A., 2004, "The Role of the Sample Shape and Size on the Internal Stress Induced Curvature Of Thin-Film Substrate Systems", Int. J. Solids Struct., 41 (18-19), pp. 5143-5154.
25. Lakes, R. S., 1987, "Foam Structures With a Negative Poisson's Ratio", Science, 235, pp. 1038-1040.
26. Evans, K. E., 1991, "Auxetic Polymers-A New Range of Materials", Endeavour, 15(4), pp. 170-174.
27. Yang, W., Li, Z. M., Shi, W., Xie, B. H., and Yang, M. B., 2004, "On Auxetic Materials", J. Mater. Sci., 39(10), pp. 3269-3279.
28. Timoshenko, S., and Woinowsky-Kreiger, S., 1959, Theory of Plates and Shells, McGraw-Hill, New York.
29. Pomeroy, R. J., 1970, "The Effect of Anticlastic Bending on the Curvature of Beams", Int. J. Solids Struct., 6(2), pp. 277-285.