Influences of roll-to-roll process and polymer substrate anisotropies on the tensile failure of thin oxide films

Thin Solid Films

Volumn 518, Issue 23, 2010, Pages 6984-6992

  Leterrier, Yves ^a   Pinyol, Albert ^a   Rougier, Luc ^a   Waller, Judith H ^a   Månson, Jan Anders ^a   Dumont, Pierre J J ^b   Andersons, Janis ^c   Modniks, Janis ^c   Campo, Manuel ^d   Sauer, Peter ^d   Schwenzel, Julian ^d  

^a LABORATOIRE DE TECHNOLOGIE DES COMPOSITES ET POLYMÈRES LTC   (Switzerland)

^b Laboratory of Pulp and Paper Industry LGP2 UMR CNRS 5518   (France)

^c UNIVERSITY OF LATVIA   (Latvia)

^d Applied Films GmbH and Co KG   (Germany)

Author keywords

Anisotropy; Failure; Internal stresses; Polymer substrates; Roll to roll processing

Indexed keywords

ANISOTROPIC SUBSTRATES; EXPERIMENTAL DATA; FAILURE; FINITE ELEMENT MODELING; FRACTURE MECHANICS ANALYSIS; IN-PLANE ORIENTATION; INTERNAL STRAINS; INTERNAL STRESS; MACHINE DIRECTIONS; POLYMER SUBSTRATE; POLYMER SUBSTRATES; ROLL TO ROLL; ROLL-TO-ROLL PROCESS; ROLL-TO-ROLL PROCESSING; SUBSTRATE ANISOTROPY; TENSILE FAILURES; THIN OXIDE FILMS; THIN OXIDES; TRANSVERSE DIRECTIONS;

ANISOTROPY; FINITE ELEMENT METHOD; FRACTURE MECHANICS; OXIDE FILMS; PLASTIC COATINGS; POLYMER FILMS; POLYMERS; PROTECTIVE COATINGS; STRESS ANALYSIS;

SUBSTRATES;

EID: 77956224987     PISSN: 00406090     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tsf.2010.07.033     Document Type: Article

References (38)

1. G.P. Crawford, Flexible Flat Panel Displays 2005 J. Wiley Chichester, UK
2. K.J. Allen Proc. IEEE 93 2005 1394
3. R.H. Reuss, D.G. Hopper, and J.G. Park MRS Bull. 31 2006 447
4. M.C. Choi, Y. Kim, and C.S. Ha Prog. Polym. Sci. 33 2008 581
5. R. Ludwig, R. Kukla, and E. Josephson Proc. IEEE 93 2005 1483
6. Z. Suo, J. Vlassak, and S. Wagner China Particuology 3 2005 321
7. A. Pinyol, L. Rougier, D. Gilliéron, V. Mewani, Y. Leterrier, J.-A.E. Månson, P. Dumont, J. Andersons, M. Campo, P. Sauer, and J. Schwenzel 7th Annual Flexible Electronics and Displays Conference and Exhibition, Phoenix, AZ January 21-24, 2008
8. C.A. Bishop Vacuum Deposition onto Webs, Films and Foils 2007 William Andrew Publishing Norwich, NY, USA
9. Y. Okabe, N. Takeda, M. Yanaka, and Y. Tsukahara IEEE Trans. Ultrason. Ferroelectr. Freq. Control 46 1999 1269
10. R. Feng, and R.J. Farris J. Appl. Polym. Sci. 86 2002 2937
11. S.L. Zhang, and J.C.M. Li J. Polym. Sci. B. Polym. Phys. 42 2004 260
12. S.D. Cheng, Y. Zhou, C.H. Kam, W.X. Que, Y.L. Lam, Y.C. Chan, and W.S. Gan M. Osinski, S.J. Chua, S.F. Chichibu, Proc. SPIE Conference on Design, Fabrication, and Characterization of Photonic Devices, Int. Soc. Opt. Eng., Singapore 1999 680
13. S. Lee, S.T. Choi, and Y.Y. Earmme Int. J. Sol. Struct. 43 2006 3401
14. S. Lee, S.T. Choi, and Y.Y. Earmme I Int. J. Sol. Struct. 44 2007 5801
15. S. Lee, S.T. Choi, and Y.Y. Earmme Int. J. Sol. Struct. 45 2008 746
16. X. Chen, E.K. Richman, B.L. Kirsch, R. Senter, S.H. Tolbert, and V. Gupta J. Appl. Phys. 104 2008 083515
17. P. Dumont, G. Tornare, Y. Leterrier, and J.-A.E. Månson Thin Solid Films 515 2007 7437
18. G. Rochat, Y. Leterrier, P. Fayet, and J.-A.E. Månson Thin Solid Films 437 2003 204
19. Y. Leterrier Prog. Mater. Sci. 48 2003 1
20. K. Röll J. Appl. Phys. 47 1976 3224
21. Y. Inoue, and Y. Kobatake Appl. Sci. Res. A7 1958 314
22. C.B. Masters, and N.J. Salamon Int. J. Eng. Sci. 31 1993 915
23. J. de Goede, P. Bouten, L. Médico, Y. Leterrier, J.-A.E. Månson, and G. Nisato R.P. Vinci, R. Schwaiger, A. Karim, V. Shenoy, Stability AR of Thin Films and Nanostructures, Mater. Res. Soc. Symp. Proc. 854E, Warrendale, PA 2005
24. Y. Leterrier, L. Boogh, J. Andersons, and J.A.E. Månson J. Polym. Sci. B. Polym. Phys. 35 1997 1449
25. B. Haworth, Z.W. Dong, and P. Davidson Polym. Int. 32 1993 325
26. R.M. Gohil J. Appl. Polym. Sci. 48 1993 1635
27. R.M. Gohil J. Appl. Polym. Sci. 52 1994 925
28. G. Rochat, Y. Leterrier, P. Fayet, and J.A.E. Månson Thin Solid Films 484 2005 94
29. W.A. MacDonald, M.K. Looney, D. MacKerron, R. Eveson, and K. Rakos Plast. Rubber Compos. 37 2008 41
30. J.L. Beuth Int. J. Sol. Struct. 29 1992 1657
31. J.J. Vlassak Int. J. Fract. 119 2003 299
32. J. Andersons, J. Modniks, Y. Leterrier, G. Tornare, P. Dumont, and J.-A.E. Månson Theor. Appl. Fract. Mech. 49 2008 151
33. Z.C. Xia, and J.W. Hutchinson J. Mech. Phys. Solids 48 2000 1107
34. J. Andersons, P.H.M. Timmermans, and J. Modniks Int. J. Fract. 148 2007 233
35. R.M. Jones Mechanics of Composite Materials Second Edition 1999 Taylor & Francis London
36. J.N. Reddy Mechanics of Laminated Composite Plates and Shells: Theory and Analysis Second Edition 2000 CRC Press LLC publishing Boca Raton, FL, USA
37. B.F. Blumentritt IBM J. Res. Dev. 23 1979 66
38. R.P. Vinci, and J.J. Vlassak Annu. Rev. Mater. Sci. 26 1996 431