Review on the pharmaceutical applications of hot melt extruder

Asian Journal of Pharmaceutical and Clinical Research

Volumn 3, Issue 2, 2010, Pages 80-83

  Patel, Pradip S ^a   Raval, Jignesh P ^a   Patel, Hemul V ^a  

^a Ashok & Rita Patel Institute of Integrated Study and Research in Biotechnology and Allied Sciences   (India)

Author keywords

Excipients in HME process; Extruder; Formulations development; HME process; Hot melt extrusion

Indexed keywords

CARBON DIOXIDE; CELLULOSE DERIVATIVE; LIPID; MACROGOL; METHACRYLIC ACID; PLASTICIZER; POLYGLACTIN; POLYMER; POLYVINYL ACETATE; STARCH; WAX;

DRUG DELIVERY SYSTEM; DRUG FORMULATION; DRUG MANUFACTURE; DRUG SOLUBILITY; DRUG STABILITY; EQUIPMENT; EXCIPIENT COMPATIBILITY; HOT MELT EXTRUDER; HOT MELT EXTRUSION PROCESS; LOW TEMPERATURE PROCEDURES; PARTICLE SIZE; PHYSICAL CHEMISTRY; REVIEW; SENSITIVITY ANALYSIS; TABLET PROPERTY;

EID: 77953402856     PISSN: 09742441     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (56)

1. st ed. New Yolk: John Wiley & Son; 1977.
2. McGinity JW, Zhang F, Repka MA, Koleng JJ. Hot-melt extrusion as a pharmaceutical process. Am Pharm Rev. 2001; 4(2): 25-36.
3. Breitenbach J. Melt extrusion: from process to drug delivery technology. Eur J Pharm Biopharm. 2002; 54:107-117.
4. Crowley MM, Zhang F, Koleng JJ, McGinity JW. Stability of polyethylene oxide in matrix tablets prepared by hot-melt extrusion, Biomaterials. 2002; 23:4241-4248.
5. McGinity J, Hot-melt extrusion as a pharmaceutical process. AAPS Newsmagazine. 2004; 7(3):21-25.
6. Dittgen M, Fricke S, Gerecke H, Osterwald H. Hot spin mixing: a new technology to manufacture solid dispersions, Pharmazie.1995; 50:225-226.
7. Patel PS, Mundargi RC, Ramesh Babu V, Jain D, Rangaswamy V, Aminabhavi TM. Microencapsulation of doxycyline into Poly(lactideco- glycolide) by spray drying technique: Effect of polymer molecular weight on process parameters. J App Poly Sci. 2008; 108:4038-4046.
8. Sekikawa H, Arita T, Nakano M. Dissolution behaviors and gastrointestinal absorption of phenytoin in phenytoinpolyvinylpyrrolidine coprecipitate. Chem Pharm Bull. 1978; 26:118-126.
9. Sekikawa H, Fukyda W, Takada M, Ohtani K, Arita T, Nakano M. Dissolution behavior and gastrointestinal absorption of dicumarol from solid dispersion systems of dicumarol-polyvinylpyrrolidine and dicumarol-beta-cyclodextrin. Chem Pharm Bull. 1983; 31:1350-1356.
10. Nozawa Y, Mizumoto T, Higshide F. Roll-mixing of formulations, Pharm Acta Helv 1985; 60:175-177.
11. Nozawa Y, Mizumoto T, Higashide F. Improving dissolution rate of practically insoluble drug kitasamycin by forcibly roll mixing with additives, Pharm Ind 1986; 8:967-969.
12. Sekiguchi K, Obi N. Studies on absorption of entectic mixtures. Chem Pharm Bull 1961; 9:866-872.
13. Hajratwala BR. Dissolution of solid dispersion systems, Aust J Pharm Sci. 1974; 4:101-109.
14. Forster A, Hempenstall J, Rades T. Characterization of glass solutions of poorly water-soluble drugs produced by melt extrusion with hydrophilic amorphous polymers. J Pharm Pharmacol. 2001; 53(3):303-315.
15. Kinoshita M, Baba K, Nagayasu A, Yamabe K, Shimooka T, Takeichi Y. et al. Improvement of solubility and oral bioavailability of a poorly water-soluble drug, TAS-301, by its melt-adsorption on a porous calcium silicate. J Pharm Sci. 2002; 91(2):362-370.
16. Ndindayino F, Vervaet C, Van Den Mooter G, Remon JP. Direct compression and moulding properties of co-extruded isomalt/drug mixtures. Int J Pharm. 2002; 235(1-2):159-168.
17. Breitenbach J, Magerlein M. Melt extruded molecular dispersions. In I. Ghebre-Sellassie & C. Martin, editors, Pharmaceutical Extrusion Technology. Vol. 133 New York: Marcel Dekker Inc; 2003.
18. Brabander C de, Vervaet C, Remon JP. Development and evaluation of sustained release mini-matrices prepared via hot melt extrusion. J Controlled Release 2003; 89(2):235-247.
19. Zhang F, McGinity JW. Properties of sustained-release tablets prepared by hot-melt extrusion. Pharmaceut Dev. Tech. 1999; 4(2):241-250.
20. Prodduturi S, Manek RV, Kolling WM, Stodghill SP, Repka MA. Solidstate stability and characterization of hot-melt extruded poly (ethylene oxide) films. J Pharm Sci. 2005; 94(10):2232-2245.
21. Mididoddi PK, Prodduturi S, Repka MA. Influence of tartaric acid on the bioadhesion and mechanical properties of hot-melt extruded hydroxypropyl cellulose films for the human nail. Drug Dev Ind Pharm. 2006; 32:1059-1066.
22. Repka MA, McGinity JW. Bioadhesive properties of hydroxypropylcellulose topical films produced by hot-melt extrusion. J Controlled Release. 2001; 70(3):341-351.
23. st Century: A Risk-Based Approach, September 2004.
24. Luker K. Single-screw extrusion and screw design. In I. Ghebre-Sellassie & C. Martin, editors, Pharmaceutical extrusion technology. Drugs and the pharmaceutical sciences. Volume 133:39-68 New York: Marcel Dekker, Inc.; 2003.
25. Mollan M. Historical overview. In I. Ghebre-Sellassie & C. Martin, editors, Pharmaceutical extrusion technology. Volume 133:1-18 New York: Marcel Dekker, Inc.; 2003.
26. Repka MA, McGinity JW, Zhang F, Koleng JJ. Hot-melt extrusion technology. In J. Swarbrick & J. Boylan, editors, Encyclopedia of pharmaceutical technology. 2nd ed. New York: Marcel Dekker, Inc.; 2002, 203-266.
27. Hülsmann S, Backensfeld T, Keitel S, Bodmeier R. Melt extrusion - an alternative method for enhancing the dissolution rate of 17β- estradiol hemihydrates. Eur J Pharm Biopharm. 2000; 49(3):237-242.
28. Geert Verreck, Karel Six, Guy Van den Mooter, Lieven Baert, Jef Peeters, Marcus E Brewster. Characterization of solid dispersions of itraconazole and hydroxypropylmethylcellulose prepared by melt extrusion-Part: I, Int J Pharm. 2003; 251(1-2):165-174.
29. Prodduturi S, Urman KL, Otaigbe JU, Repka MA. Stabilization of hotmelt extrusion formulations containing solid solutions using polymer blends. AAPS Pharm Sci Tech 2007; 8 (2):1-10.
30. Michael M, Crowley, Zhang F, Koleng JJ, McGinity JW. Stability of polyethylene oxide in matrix tablets prepared by hot-melt extrusion. Biomaterials 2002; 23(21):4241-4248
31. Verhoeven E, De Beer TRM, Schacht E, Van den Mooter G, Remon JP, Vervaet C. Influence of polyethylene glycol/polyethylene oxide on the release characteristics of sustained-release ethylcellulose minimatrices produced by hot-melt extrusion: in vitro and in vivo evaluations. Eur J Pharm Biopharm. 2009; 72(2):463-470,
32. Young SS, Chang-Won J, Hongkee S, Eun-Seok P, Beom-Jin L. Characterization of itraconazole semisolid dosage forms prepared by hot melt technique. Arch Pharm Res. 2006; 29(11):1055-1060.
33. Brabander C de, Van den Mooter G, Vervaet C, Remon JP. Characterization of ibuprofen as a nontraditional plasticizer of ethyl cellulose. J Pharm Sci. 2002; 91:1678-1685.
34. Munjal M, Stodghill SP, ElSohly MA, Repka MA. Polymeric systems for amorphous 9-tetrahydrocannabinol produced by a hot-melt method. Part I: Chemical and thermal stability during processing. J Pharm Sci. 2006; 95:1841-1853.
35. Crowley MM, Schroeder B, Fredersdorf A, Obara S, Talarico M, Kucera S. et al. Physicochemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot melt extrusion. Int J Pharm. 2004; 271(1-2):77-84.
36. Coppens K. Thermal and rheological evaluation of pharmaceutical excipients for hot melt extrusion. Paper presented at the AAPS Annual Meeting and Exposition, Baltimore, MD. 2004.
37. Verreck G. Characterization of solid dispersions of itraconazole and hydroxypropylmethylcellulose prepared by melt extrusion- Part I. Int J Pharm. 2003; 251(1-2):165-174.
38. Sprockel OL, Sen M, Shivanand P, Prapaitrakul W. A melt extrusion process for manufacturing matrix drug delivery systems. Int J Pharm. 1997; 155(2):191-199.
39. Zhu YC, Shah NH, Malick AW, Infeld MH, McGinity JW. Solid-state plasticization of an acrylic polymer with chlorpheniramine maleate and triethyl citrate. Int J Pharm. 2002; 241(2):301-310.
40. Crowley MM, Zhang F, Koleng JJ, McGinity JW. Stability of polyethylene oxide in matrix tablets prepared by hot-melt extrusion. Biomaterials. 2002; 23(21): 4241-4248.
41. Zhang F, McGinity JW. Properties of hot-melt extruded theophylline tablets containing poly (vinyl acetate). Drug Dev Ind Pharm. 2000; 26(9):931-942.
42. Mundargi RC, Ramesh Babu V, Rangaswamy V, Patel PS, Aminabhavi TM. Nano/micro technologies for delivering macromolecular therapeutics using poly (D,L-lactide-co-glycolide) and its derivatives. J Controlled Release. 2008; 125: 193-209.
43. Bhardwaj R, Blanchard J. In vitro characterization and in vivo release profile of a poly (D, L-lactide-co-glycolide)-based implant delivery system for the alpha-MSH analog, melanotan-I. Int J Pharm. 1998; 170(1):109-117.
44. Henrist D, Lefebvre RA, Remon JP. Bioavailability of starch based hot stage extrusion formulations. Int J Pharm. 1999; 187(2):185-191.
45. Pinto JF, Silverio NP. Assessment of the extrudability of three different mixtures of saturated polyglycolysed glycerides by determination of the "specific work of extrusion" and by capillary rheometry. Pharm Dev Technol. 2001; 6:117-128.
46. Miyagawa Y, Sato H, Okabe T, Nishiyama T, Miyajima MA, Sunada H. In vivo performance of wax matrix granules prepared by a twinscrew compounding extruder. Drug Dev Ind Pharm. 1999; 25(4):429-435.
47. Heo MY, Piao ZZ, Kim TW, Cao QR, Kim A, Lee BJ. Effect of solubilizing and microemulsifying excipients in polyethylene glycol 6000 solid dispersion on enhanced dissolution and bioavailability of ketoconazole. Arch Pharm Res. 2005; 28:604-611.
48. Follonier N, Doelker E, Cole ET. Evaluation of hot-melt extrusion as a new technique for the production of polymer-based pellets for sustained release capsules containing high loadings of freely soluble drugs. Drug Dev Ind Pharm. 1994; 20(8):1323-1339.
49. Aitken-Nichol C, Zhang F, McGinity JW. Hot melt extrusion of acrylic films. Pharm Res. 1996; 13(5):804-808.
50. ® J Pharm Pharmacol. 2007; 59(11):1493-1500.
51. Repka MA, McGinity JW. Physical-mechanical, moisture absorption and bioadhesive properties of hydroxypropylcellulose hot-melt extruded films. Biomaterials. 2000; 21(14):1509-1517.
52. Rahman M, Brazel CS, The plasticizer market: an assessment of traditional plasticizers and research trends to meet new challenges. Prog Poly Sci. 2004; 29(12):1223-1248.
53. Follonier N, Doelker E, Cole ET. Various ways of modulating the release of diltiazem hydrochloride from hot-melt extruded sustained release pellets prepared using polymeric materials. J Controlled Release. 1995; 36:243-250.
54. Perissutti B, Newton J, John M, Podczeck F, Rubessa F. Preparation of extruded carbamazepine and PEG 4000 as a potential rapid release dosage form, Eur J Pharm Biopharm. 2002; 53:125-132.
55. Shaikh NA, Abidi SE, Block LH, Evaluation of ethylcellulose as a matrix for prolonged release formulations. Part 1. Water-soluble drugs- acetaminophen and theophylline. Drug Dev Ind Pharm. 1987; 13:1345-1369.
56. Young CR, Dietzsch C, Cerea M, Farrell T, Fegely KA, Rajabi SA, et al. Physicochemical characterization and mechanisms of release of theophylline from melt-extruded dosage forms based on a methacrylic acid copolymer. Int J Pharm. 2005; 301(1-2):112-120.