Fundamentals of Earthquake Engineering

Fundamentals of Earthquake Engineering

Volumn , Issue , 2008, Pages 1-347

  Elnashai, Amr S ^a   Di Sarno, Luigi ^b  

^a UNIVERSITY OF ILLINOIS AT URBANA CHAMPAIGN   (United States)

^b UNIVERSITY OF SANNIO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 77952099200     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470024867     Document Type: Book

References (528)

1. Abrahamson, N.A. (1991). Spatial coherency of ground motion from the SMART-1 array. Geotechnical News, 9 (1), 31-34.
2. AIJ (1995). Performance of Steel Buildings during the 1995 Hyogoken-Nanbu Earthquake. Architectural Institute of Japan, Tokyo, Japan.
3. Ambraseys, N.N. (1959). A note on the response of an elastic overburden of varying rigidity to an arbitrary ground motion. Bulletin of the Seismological Society of America, 49 (3), 211-220.
4. Ambraseys, N.N. (1985). Intensity-attenuation and magnitude-intensity relationships for Northwest European earthquakes. Earthquake Engineering and Structural Dynamics, 13 (6), 733-778.
5. Ambraseys, N.N. (1989). Long-term Seismic Hazard in the Eastern Mediterranean Region, Geohazards, Natural and Man-Made. Chapman and Hall, New York, NY, USA.
6. Ambraseys, N.N. (2006). Comparison of frequency of occurrence of earthquakes with slip rates from long-term seismicity data: The cases of Gulf of Corinth, Sea of Marmara and Dead Sea Fault Zone. Geophysical Journal International, 165 (2), 516-526.
7. Ambraseys, N.N. and Finkel, C. (1986). Corpus of Isoseismal Maps of Eastern Mediterranean Region. Engineering Seismology and Earthquake Engineering, Research Report No. ESEE 86/8, Imperial College, London, UK.
8. Ambraseys, N.N. and Melville, C.P. (1982). A History of Persian Earthquakes. Cambridge University Press, Cambridge, UK.
9. Ambrose, J. and Vergun, D. (1999). Design for Earthquakes. John Wiley & Sons, New York, NY, USA.
10. Andreason, K. and Rose, J.D. (1994). Northridge, California earthquake: Structural performance of buildings in San Fernando Valley, California (January 17, 1994). American Plywood Association, APA Report No. T94-5, Tacoma, Washington, DC, USA.
11. Applied Technology Council (ATC) (1998). Design, Retrofit and Performance of Nonstructural components. Proceedings of the ATC Seminar, Report No. 2-1, Redwood City, CA.
12. Baker, W.A., Brown, D.H. and Tissel, J.R. (1989). Loma Prieta earthquake, San Francisco Bay Area, October 17, 1989. American Plywood Association, APA Report No. T89-28, Tacoma, Washington, DC, USA.
13. Benioff, H. (1955). Mechanism and strain characteristics of the White Wolf fault as indicated by the aftershock sequence. In Earthquake in Kern County, California During 1955, Oakeshott, G.B. Editor, California Division of Mines, Bulletin No. 171CA, USA.
14. Ben-Menachem, A. (1961). Radiation patterns of seismic surface waves from finite moving sources. Bulletin of the Seismological Society of America, 51 (2), 401-435.
15. Bertero, V.V. (2000). Introduction to Earthquake Engineering. (http://nisee.berkeley.edu/ebooks/).
16. Bolt, B.A. (1999). Earthquakes. 4th Edition, W.H. Freeman and Company, New York, NY, USA.
17. Bonilla, M.G., Mark, R.K. and Lienkaemper, J.J. (1984). Statistical relations among earthquake magnitude, surface rupture length, and surface fault displacement. Bulletin of the Seismological Society of America, 76 (6), 2379-2411.
18. Broderick, B.M., Elnashai, A.S., Ambraseys, N.N., Barr, J.M., Goodfellow, R.G. and Higazy, E.M. (1994). The Northridge (California) Earthquake of 17 January 1994: Observations, Strong Motion and Correlative Response Analysis. Engineering Seismology and Earthquake Engineering, Research Report No. ESEE 94/4, Imperial College, London, UK.
19. Bukowski, W. and Scawthorn, C. (1995). Kobe Reconnaissance Report. Fire. Earthquake Spectra, Supplement A, 11 (S 1), 33-40. Earthquake Engineering Research Institute.
20. Clough, R.W. and Penzien, J. (1993). Dynamics of Structures. 2nd Edition, McGraw-Hill, New York, NY, USA.
21. Coburn, A. and Spence, R. (2002). Earthquake Protection. 2nd Edition, John Wiley & Sons, Chichester, UK.
22. Der Kiureghian, A. (1996). A coherency model for spatially varying ground motions. Earthquake Engineering and Structural Dynamics, 25 (1), 99-111.
23. Dewey, J.F. (1972). Plate Tectonics. Scientific American, 226 (5), 56-68.
24. Durrani, A.J., Elnashai, A.S., Hashah, Y.M.A., Kim, S.J. and Masud, A. (2005). The Kashmir earthquake of October 8, 2005. A quick look report. MAE Center Report No. 05-04, University of Illinois at Urbana-Champaign, IL, USA.
25. Elnashai, A.S. (2002). A very brief history of earthquake engineering with emphasis on developments in and from the British Isles. Chaos Solitons & Fractals, 13 (5), 967-972.
26. Elnashai, A.S., Bommer, J.J., Baron, I., Salama, A.I. and Lee, D. (1995). Selected Engineering Seismology and Structural Engineering Studies of the Hyogo-ken Nanbu (Kobe, Japan) Earthquake of 17 January 1995. Engineering Seismology and Earthquake Engineering, Report No. ESEE/95-2, Imperial College, London, UK.
27. Elnashai, A.S., Bommer, J.J. and Martinez-Pereira, A. (1998). Engineering implications of strong motion records from recent earthquakes. Proceedings of the 11th European Conference on Earthquake Engineering, Paris, France.
28. Federal Emergency Management Agency (FEMA) (2001). HAZUS 1999 Estimated Annualized Earthquake Losses for United States. Report No. FEMA 366, Washington, DC, USA.
29. Finn, W.D.L. (1991). Geotechnical engineering aspects of microzonation. Proceedings of the 4th International Conference on Seismic Zonation, Stanford, CA, USA, pp. 199-259.
30. Goltz, J.D. (1994). The Northridge, California Earthquake of January 17, 1994: General Reconnaissance Report. National Centre for Earthquake Engineering Research, Report No. NCEER-94-0005, Buffalo, NY, USA.
31. Gutenberg, B. and Richter, C.F. (1936). Magnitude and energy of earthquakes. Science, 83 (2147), 183-185.
32. Gutenberg, B. and Richter, C.F. (1956). Earthquake magnitude. Intensity, energy and acceleration. Bulletin of the Seismological Society of America, 46 (1), 105-145.
33. Haricharan, R.S. and Vanmarcke, E.H. (1986). Stochastic variation of earthquake ground motion in space and time. Journal of Engineering Mechanics, ASCE, 112 (2), 154-174.
34. Housner, G.W. (1965). Intensity of earthquake ground shaking near the causative fault. Proceedings of the 3rd World Conference on Earthquake Engineering, Wellington, New Zealand, Vol. 1, pp. 95-115.
35. Housner, G.W. (1973). Important features of earthquake ground motions. Proceedings of the 5th World Conference on Earthquake Engineering, Rome, Italy, Vol. 1, pp. CLIX-CLXVIII.
36. Kanai, K. (1983). Engineering Seismology. University of Tokyo Press, Tokyo, Japan.
37. Kanamori, H. (1977). The energy release in great earthquakes. Journal of Geophysical Research, 82 (20), 2981-2987.
38. Kasahara, K. (1981). Earthquake Mechanics, Cambridge University Press, Cambridge, UK.
39. Kramer, S.L. (1996). Geotechnical Earthquake Engineering. Prentice Hall, Upper Saddle River, NJ, USA.
40. Krinitzsky, E. (1974). Fault assessment in earthquake engineering. Army Engineering Waterways Experiment Station, Miscellaneous Paper S-73-1, Vicksburg, MS, USA.
41. Lee, W.H.K., Kanamori, H., Jennings, P.C. and Kisslinger, C. (2003). International Handbook of Earthquake and Engineering Seismology. Academic Press, San Diego, CA, USA.
42. Luco, J.E. and Wong, H.L. (1986). Response of a rigid foundation to a spatially random ground motion. Earthquake Engineering and Structural Dynamics, 14 (6), 891-908.
43. Mallet, R. (1862). Great Neapolitan Earthquake of 1857. The First Principles of Observational Seismology. Vol. 1, Chapman and Hall, London, UK.
44. Manolis, G.D. and Koliopoulos, P.K. (2001). Stochastic Structural Dynamics in Earthquake Engineering. Advances in Earthquake Engineering Series. WIT Press, Southampton, UK.
45. Mark, R.K. and Bonilla, M.G. (1977). Regression analysis of earthquake magnitude and surface fault length using the 1970 data of Bonilla and Buchanan. U.S. Geological Survey, USGS Open File Report 77-164. Menlo Park, CA, USA.
46. Miranda, E. and Aslani, H. (2003). Building-specific loss estimation methodology. PEER Report No. 2003-03, Pacific Earthquake Engineering Research Center, University of California at Berkeley, Berkeley, CA, USA.
47. Nuttli, O.W. (1983). Average seismic source-parameter relations for mid-plate earthquakes. Bulletin of the Seismological Society of America, 73 (2), 519-535.
48. Okamoto, S. (1984). Introduction to Earthquake Engineering. 2nd Edition, University of Tokyo Press, Tokyo, Japan.
49. Oliveira, C.S., Hao, H. and Penzien, J. (1991). Ground modelling for multiple input structural analysis. Structural Safety, 10 (1-3), 79-93.
50. Osteraas, J. and Krawinkler, H. (1990). The Mexico earthquake of September 19, 1985-Behavior of steel buildings. Earthquake Spectra, 5 (1), 51-88.
51. Plafker, G. and Galloway, J.P. (1989). Lessons learned from the Loma Prieta California, Earthquake of October 17, 1989. USGS Circular 1045.
52. Purcaru, G. and Berckhemer, H. (1978). A magnitude scale for very long earthquakes. Tectonophysics, 49, 189-198.
53. Reiter, L. (1990). Earthquake Hazard Analysis: Issues and Insights. Columbia University Press, New York, NY, USA.
54. Richter, C.F. (1935). An instrumental earthquake scale. Bulletin of the Seismological Society of America, 25 (1), 1-32.
55. Richter, C.F. (1958). Elementary Seismology. W.H. Freeman and Company, San Francisco, CA, USA.
56. Sano, T. and Pugliese, A. (1999). Parametric study on topographic effects in seismic soil amplification. Proceedings of 'Advances in Earthquake Engineering', Earthquake Resistant Engineering Structures II, Vol. 4, pp. 321-330.
57. Scawthorn, C., Eidinger, J.M. and Schiff, A.J. (2005). Fire Following Engineering. American Society of Civil Engineers, Technical Council on Lifeline Earthquake Engineering, Monograph No. 26, ASCE/NFPA, Reston, VA, USA.
58. Scholz, C.H. (1990). The Mechanics of Earthquakes and Faulting. Cambridge University Press, Cambridge, UK.
59. Scholz, C.H., Aviles, C. and Wesnousky, S. (1986). Scaling differences between large intraplate and interpolate earthquakes. Bulletin of the Seismological Society of America, 76 (1), 65-70.
60. Seed, H.B., Idriss, I.M. and Kiefer, F.S. (1969). Characteristics of rock motions during earthquakes. Journal of the Soil Mechanics and Foundations Division, ASCE, 95 (SM 5), 1199-1218.
61. Silva, W.J. (1988). Soil response to earthquake ground motion. Electric Power Research Institute, Report No. EPRI-NP-5747, Palo Alto, CA, USA.
62. Singh, J.P. (1985). Earthquake ground motions: Implications for designing structures and reconciling structural damage. Earthquake Spectra, 1 (2), 239-270.
63. Slemmons, D.B. (1977). State-of-the-art for assessing earthquake hazards in the United States: Report 6, faults and earthquake magnitude. Miscellaneous Paper S-173-1, US Army Corps of Engineers, Waterways Experiment Station, Vicksburg, MS, USA.
64. Somerville, P., McLaren, J.P., Mrinal, K.S. and Helmberg, D.V. (1991). The influence of site conditions on the spatial incoherence of ground motions. Structural Safety, 10 (1-3), 1-13.
65. Somerville, P.G., Smith, N.F., Graves, R.W. and Abrahamson N.A. (1997). Modification of empirical strong motion attenuation relations to include the amplitude and duration effects of rupture directivity. Seismological Research Letters, 68 (1), 199-222.
66. Sponheuer, W. (1960). Methoden zur Herdtiefenbestimung in der Madkroseismik. Akademic Verlag, East Berlin, Germany.
67. Steinbrugge, K.V. (1982). Earthquakes, Volcanoes and Tsunamis: An Anatomy of Hazards. Skandia America Group, New York, NY, USA.
68. Stewart, J.P., Chiou, S.J., Bray, J.O., Graves, R.W., Somerville, P.G. and Abrahamson, N.A. (2001). Ground motion evaluation procedures for performance-based design. Pacific Earthquake Engineering Center, Report No. PEER 2001/9, University of California, Berkeley, CA, USA.
69. Street, R.L. and Turcotte, F.T. (1977). A study of northeastern North America spectral moments, magnitudes and intensities. Bulletin of the Seismological Society of America, 67 (3), 599-614.
70. Taylor, C. and VanMarcke, E. (2002). Acceptable risk processes: Lifelines and natural hazards. Technical Council on Lifeline Earthquake Engineering, ASCE, Monograph No. 21, Reston, VA, USA.
71. Taylor, C., Mittler, E. and LeVal, L. (1998). Overcoming Barriers: Lifeline Seismic Improvement Programs. Technical Council on Lifeline Earthquake Engineering, ASCE, Monograph No. 13, Reston, VA, USA.
72. Tocher, D. (1958). Earthquake energy and ground breakage. Bulletin of the Seismological Society of America, 48 (1), 147-153.
73. Udias, A. (1999). Principles of Seismology. Cambridge University Press, Cambridge, UK.
74. Wells, D. L. and Coppersmith, K.J. (1994). New empirical relationships among magnitude, rupture length, rupture width, rupture area, and surface displacement. Bulletin of the Seismological Society of America, 84 (4), 974-1002.
75. Wyss, M. (1979). Estimating maximum expectable magnitude of earthquakes from fault dimensions. Geology, 7 (7), 336-340.
76. Abrams, D.P. and Angel, R. (1993). Strength, behavior and repair of masonry infills. Proceedings of the Structures Congress '93, ASCE, Vol. 2, pp. 1439-1444.
77. Akiyama, H. (1985). Earthquake-Resistant Limit-State Design for Buildings. University of Tokyo Press, Tokyo, Japan.
78. Al Chaar, G., Issa, M. and Sweeney, S. (2002). Behavior of masonry-infilled nonductile reinforced concrete frames. Journal of Structural Engineering, ASCE, 128 (8), 1055-1063.
79. Ascheim, M.A. (2002). Seismic design based on the yield displacement. Earthquake Spectra, 18 (4), 581-600.
80. Bachmann, H., Ammann, W.J., Deischl, F., Eisenmann, J., Floegl, I., Hirsch, G.H., Klein, G.K., Lande, G.J., Mahrenholtz, O., Natke, H.G., Nussbaumer, H., Pretlove, A.J., Rainer, J.H., Saemann, E.U. and Steinbeisser, L. (1995). Vibration Problems in Structures. Practical Guidelines. Birkhauser Verlag, Basel, Switzerland.
81. Bertero, V.V. (2000). Performance-based seismic engineering: Conventional vs. innovative approaches. Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand, CD-ROM.
82. Bertero, R.D. and Bertero, V.V. (1992). Tall Reinforced Concrete Structures: Conceptual Earthquake Resistant Design Methodology. Earthquake Engineering Research Center, Report No. UCB/EERC/92-16, University of California, Berkeley, CA, USA.
83. Bertero, R.D. and Bertero, V.V. (1999). Redundancy in earthquake-resistant design. Journal of Structural Engineering, ASCE, 125 (1), 81-88.
84. Bertero, V.V. and Brokken, S. (1983). Infills in seismic resistant building. Journal of Structural Engineering, ASCE, 190 (6), 1337-1361.
85. Blandon, C.A. and Priestley, M.J.N. (2005). Equivalent viscous damping equations for direct displacement based design. Journal of Earthquake Engineering, 9 (2), 257-278.
86. Blume, J.A., Newmark, N.M. and Corning, L.H. (1961). Design of Multistory Reinforced Concrete Buildings for Earthquake Motions. Portland Cement Association, IL, USA.
87. Borzi, B., Calvi, G.M., Elnashai, A.S., Faccioli, E. and Bommer, J.J. (2001). Inelastic spectra for displacement-based design. Soil Dynamics and Earthquake Engineering, 21 (1), 47-61.
88. Bozorgnia, Y. and Bertero, V.V. (2004). Earthquake Engineering. From Engineering Seismology to Performance-Based Engineering. CRC Press, Boca Raton, FL, USA.
89. Bruneau, M., Uang, C.M. and Whittaker, A. (1998). Ductile design of steel structures. McGraw-Hill, New York, NY, USA.
90. Calvi, G.M. (1999). A displacement-based approach for vulnerability evaluation of classes of buildings. Journal of Earthquake Engineering, 3 (3), 411-438.
91. Comite Euro-Internationale du Beton (CEB) (1996). RC Frames Under Earthquake Loading. State of the Art Report. Thomas Telford, London, UK.
92. Di Sarno, L. (2003). Performance-based assessment of steel perimeter frames. Proceedings of the International Conference 'Extreme Loading on Structures', Toronto, Canada, CD-ROM.
93. Di Sarno, L. and Elnashai, A.S. (2002). Seismic retrofitting of steel and composite building structures. Mid-America Earthquake Center Report, CD Release 02-01, University of Illinois at Urbana-Champaign, IL, USA.
94. Di Sarno, L. and Elnashai, A.S. (2003). Innovative strategies for seismic retrofitting of steel and composite structures. Journal of Progress in Structural Engineering and Materials, 7 (3), 115-135.
95. Di Sarno, L. and Elnashai, A.S. (2005). Special metals for seismic retrofitting of steel buildings. Journal of Progress in Structural Engineering and Materials, 5 (2), 60-76.
96. Di Sarno, L., Elnashai, A.S. and Nethercot, D.A. (2003). Seismic performance assessment of stainless steel frames. Journal of Constructional Steel Research, 59 (10), 1289-1319.
97. Durkin, M.E. (1985). Behavior of building occupants in earthquakes. Earthquake Spectra, 1 (2), 271-283.
98. Elnashai, A.S. (1992). Effect of member characteristics on the response of RC structures. Proceedings of the 10th World Conference on Earthquake Engineering, Madrid, Spain, pp. 3275-3280.
99. Elnashai, A.S. (1994). Local ductility in steel structures subjected to earthquake Load Ing. In Behaviour of Steel Structures In Seismic Areas, F.M. Mazzolani and V. Gioncu, Eds., STESSA '94, E & FN Spon, pp. 133-148.
100. Elnashai, A.S (1999). The Kocaeli (Turkey) Earthquake of 17 August 1999: Assessment of Spectra and Structural Response Analysis. Engineering Seismology and Earthquake Engineering, Report No. ESEE/99-3, Imperial College, London, UK.
101. Elnashai, A.S. and Dowling, P.J. (1991). Seismic design of steel structures. In Steel Subjected to Dynamic Loading. Stability and Strength, R. Narayanan and T.M. Roberts, Eds., Elsevier Applied Science, London, England.
102. Elnashai, A.S. and Mwafy, A.M. (2002). Overstrength and force reduction factors of multistorey reinforced-concrete buildings. The Structural Design of Tall Buildings, 11 (5), 329-351.
103. Elnashai, A.S. and Pinho, R. (1998). Repair and retrofitting of RC walls using selective techniques. Journal of Earthquake Engineering , 2 (4), 525-568.
104. Elnashai, A.S., Elghazouli, A.Y. and Danesh Ashtiani, F.A. (1998). Response of semi-rigid steel frames to cyclic and earthquake loads. Journal of Structural Engineering, ASCE, 124 (8), 857-867.
105. Engineering Sciences Data Unit (ESDU) (1991). Structural Parameters Used in Response Calculations (Estimation of Numerical Values). Item No.91001, ESDU International, London, UK.
106. Fang, J.Q., Li, Q.S., Jeary, A.P. and Liu, D.K. (1999). Damping of tall buildings: Its evaluation and probabilistic characteristics. The Structural Design of Tall Buildings, 8 (2), 145-153.
107. Fardis, M.N. and Calvi, G.M. (1995). Effects of infills on the global response of reinforced concrete frames. Proceedings of the 10th European Conference on Earthquake Engineering, A.A. Balkema, Rotterdam, Vol. 4, pp. 2893-2898.
108. Fardis, M.N. and Panagiotakos, T.B. (1996). Hysteretic damping of reinforced concrete elements. Proceedings of the 11th World Conference on Earthquake Engineering, Elsevier, Paper No. 464.
109. Fardis, M.N. and Panagiotakos, T.B. (1997). Seismic design and response of bare and masonry-infilled reinforced concrete buildings -Part II: Infilled structures. Journal of Earthquake Engineering, 1 (3), 475-503.
110. Fu, H.C., Erki, M.A. and Seckin, M. (1991). Review of effects of loading rate on reinforced concrete. Journal of Structural Engineering, ASCE, 117 (12), 3660-3679.
111. Hart, G.C. (1996). Random damping in buildings. Journal of Wind Engineering and Industrial Aerodynamics, 59 (2-3), 233-246.
112. Hart, G.C., Lew, M. and Julio, R.D. (1973). High-rise building response: Damping and period non-linearities. Proceedings of the 5th World Conference on Earthquake Engineering, Rome, Italy, Vol. 2, pp. 1440-1444.
113. Housner, G.W. (1956). Limit design of structures to resist earthquakes. Proceedings of the 1st World Conference on Earthquake Engineering, Berkeley, CA, USA, Vol. 5, pp. 1-11.
114. Humar, J.L. and Ragozar, M.A. (1996). Concept of overstrength in seismic design. Proceedings of the 11th WCEE, Acapulco, Mexico, CD-ROM, Paper No. 639.
115. Izzuddin, B.A. and Elnashai, A.S. (1993). The influence of rate-sensitivity on the response of steel frames. Proceedings of Eurodyn '93, Trondheim, Norway, pp. 617-624.
116. Jacobsen, L.S. (1930). Steady forced vibration as influenced by damping. Transactions of ASME, 52 (1), 169-181.
117. Jain, S.K. and Navin, N. (1995). Seismic overstrength in reinforced concrete frames. Journal of Structural Engineering, ASCE, 121 (3), 580-585.
118. Jennings, P.C. (1968). Equivalent viscous damping for yielding structures. Journal of Engineering Mechanics Division, ASCE, 94 (EM-1), 131-165.
119. Jeary, A.P. (1986). Damping in tall buildings. A mechanism and a predictor. Earthquake Engineering and Structural Dynamics, 14 (5), 733-750.
120. Jeary, A.P. (1996). Description and measurement of non-linear damping in structures. Journal of Wind Engineering and Industrial Aerodynamic, 59 (2-3), 103-114.
121. Kappos, A.J., Stylianidis, K.C. and Michailidis, C.N. (1998). Analytical models for brick masonry infilled R/C frames under lateral loading. Journal of Structural Engineering, ASCE, 2 (1), 59-87.
122. Kasai, K. and Popov, E.P. (1986). A study on the seismically resistant eccentrically steel frames. Earthquake Engineering Research Center, Report No. UCB/EERC-86/01, University of California, Berkeley, CA, USA.
123. Klinger, R.E. and Bertero, V.V. (1976). Infilled frames in earthquake-resistant construction. Report No. EERC/76-32. Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
124. Krawinkler, H. and Mohasseb, S. (1987). Effects of panel zone deformations on seismic response. Journal of Constructional Steel Research, 8 (3), 233-250.
125. Kurose, Y. (1987). Recent studies on reinforced concrete deep-beam-column assemblages under cyclic loads. Phil M. Ferguson Structural Engineering Laboratory, Report No. 87-8, Civil Engineering, University of Texas, Austin, TX, USA.
126. Kwon, O.S. and Elnashai, A.S. (2006). The effect of material and ground motion uncertainty on the seismic vulnerability curves of RC structure. Engineering Structures, 28 (2), 289-303.
127. Lee, D.H. and Elnashai, A.S. (2002). Inelastic seismic analysis of RC bridge piers including flexure-shear-axial interaction. Structural Engineering and Mechanics, Vol. 13 (3), 241-260.
128. Lin, Y.Y., Miranda, E., Chnag, K.C. (2005). Evaluation of damping reduction factors for estimating elastic response of structures with high damping. Earthquake Engineering and Structural Dynamics, 34 (11), 1427-1443.
129. Matos, C.G. and Dodds, R.H. (2002). Probabilistic modelling of weld fracture in steel frame connections. Part II: Seismic loadings. Engineering Structures, 24 (6), 687-705.
130. Mehrabi, A.B., Shing, P.B., Schuller, M.P. and Noland, J.L. (1996). Experimental evaluation of masonry-infilled RC frames. Journal of Structural Engineering, ASCE, 11 (3), 228-236.
131. Mileti, D.S. and Nigg, J.M. (1984). Earthquakes and human behavior. Earthquake Spectra, 1 (1), 89-106.
132. Miranda, E. and Ruiz-Garcia, J. (2002). Evaluation of the approximate methods to estimate maximum inelastic displacement demands. Earthquake Engineering and Structural Dynamics, 31 (3), 539-560.
133. Mitchell, D. and Paulter, P. (1994). Ductility and overstrength in seismic design of reinforced concrete structures. Canadian Journal of Civil Engineering, 21 (6), 1049-1060.
134. Moghaddam, H.A. (1990). Seismic design of infilled frames. Proceedings of the 9th European Conference on Earthquake Engineering, Kucherenko Tsniisk of the USSR Gosstroy, Moscow, Vol. 3, pp. 3-8.
135. Moghaddam, H.A., Dowling, J.P. and Ambraseys, N.N. (1988). Shaking table study of brick masonry infilled frames subjected to seismic excitations. Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo, Japan, Vol. VIII, Paper No. SI-13, pp. 913-918.
136. Mwafy, A.M. (2000). Seismic Performance of Code-Designed RC Buildings. PhD Thesis, Imperial College, London, UK.
137. Mwafy, A.M. and Elnashai, A.S.(2001). Static pushover versus collapse analysis of RCbuildings. Engineering Structures, 23(5), 407-424.
138. Mwafy, A.M. and Elnashai, A.S. (2002). Calibration of force reduction factors of RCbuildings. Journal of Earthquake Engineering, 6(2), 239-273.
139. Mylonakis, G. and Gazetas, G. (2000). Seismic soil-structure interaction: Beneficialor detrimental. Journal of Earthquake Engineering ,4 (3), 277-301.
140. Nader, M.N. and Astaneh, A.A. (1992). Seismic behaviour and design of semi-rigid steel frames. Report No. UCB/EERC-92/06, University ofCalifornia, Berkeley, CA, USA.
141. Newmark, N.M. and Hall, W.J. (1969). Seismic design criteria for nuclear reactorfacilities. Proceedings of the 4th World Conference on EarthquakeEngineering, Santiago, Chile, B-4, pp. 37-50.
142. Novak, M. (1974). Effect of soil on structuralresponse to wind and earthquake. Earthquake Engineering and Structural Dynamics, 3 (1), 79-96.
143. Park, R. (1988). Ductility evaluation fromlaboratory and analytical testing. Proceedings of the 9th World Conference onEarthquake Engineering, Tokyo-Kyoto, Japan, Vol.VIII, pp. 605-616.
144. Park, R.(1996). Explicit incorporation of element and structureoverstrength in the design process. Proceedings of the 11th WCEE, Acapulco, Mexico, CD-ROM, Paper No. 2130.
145. Park, R. and Paulay, T. (1975). Reinforced Concrete Structures.John Wiley & Sons, New York, NY, USA.
146. Paulay, T. (1998). Torsional mechanisms in ductile buildingsystems. Earthquake Engineering and Structural Dynamics,27 (10), 1101-1121.
147. Paulay, T. (2001). Some design principles relevant to torsionalphenomena in ductile buildings. Journal of EarthquakeEngineering, 5 (3), 273-308.
148. Paulay, T. and Priestley, M.N.J. (1992). SeismicDesign of Reinforced Concrete and Masonry Buildings. John Wiley& Sons, New York, NY, USA.
149. Priestley, M.J.N.(2003). Myths and Fallacies in Earthquake EngineeringRevisited. The Mallet Milne Lecture, IUSS Press, Italy.
150. Priestley, M.J.N. and Grant, D.N.(2005). Viscous damping in seismic design and analysis.Journal of Earthquake Engineering, 9 (2),229-255.
151. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996). Seismic design and retrofit of bridges.John Wiley & Sons, New York, NY, USA.
152. Roeder, C.W. (2002). Connection performance for seismic design ofsteel moment frames. Journal of Structural Engineering, ASCE,128 (4), 517-525.
153. Roesset, J., Whitman, R.V. and Dobry, R. (1973). Modal analysis forstructures with foundation interaction. Journal of StructuralDivision, ASCE, 99 (ST3), 399-416.
154. Saneinejad, A. and Hobbs, B. (1995). Inelasticdesign of infilled frames. Journal of Structural Engineering, ASCE, 121 (4), 634-650.
155. Satake, N., Suda, K., Arakawa, T., Sasaki, A. and Tamura, Y.(2003). Damping evaluation using full scale data of buildings inJapan. Journal of Structural Engineering, ASCE, 129(4), 470-477.
156. Schneider, S.P., Roeder, C.W.and Carpenter, J.E. (1993). Seismic behavior of momentresisting steel frames: Experimental studies. Journal of StructuralEngineering, ASCE, 119 (ST 6), 1885-1902.
157. Schneider, S.P., Zagers, B.R. and Abrams, D.P.(1998). Lateral strength of steel frames with masonry infillshaving large openings. Journal of Structural Engineering, ASCE,124 (8), 896-904.
158. Shing, P.B.and Mehrabi, A.B. (2002). Behaviour and analysis ofmasonry-infilled frames. Progress in Structural Engineering and Materials, 4 (3), 320-331.
159. Soong, T.T. and Spencer, B.F. Jr. (2002).Supplemental energy dissipation: State-of-the-art and state-of-practice. Engineering Structures, 24 (3),243-259.
160. Suda, K., Satake, N., Ono, J. and Sasaki, A. (1996). Damping properties of buildings in Japan.Journal of Wind Engineering and Industrial Aerodynamics,59 (2-3), 383-392.
161. Taranath, B.S. (1998). Steel, Concrete and Composite Design of TallBuildings. McGraw-Hill, New York, NY, USA.
162. Tomazevic, M. (1999). Earthquake Resistant Designof Masonry Buildings. Series on Innovation in Structures and Construction. Vol. 1, A.S. Elnashai and P.J. Dowling, Eds., Imperial College Press, London, UK.
163. Tsai, N.C. 1974). Modal damping for soil-structure interaction.Journal of Engineering Mechanics Division, ASCE, 100(EM 2), 323-341.
164. Uang, C.M.(1991). Establishing R (or R w) and C d factors for buildingseismic provisions. Journal of Structural Engineering, ASCE,117 (1), 19-28.
165. Usami, T., Mizutani, S., Aoki, T. and Itoh, Y. (1992). Steel andconcrete-filled steel compression members under cyclic loading. InStability and Ductility of Steel Structures Under Cyclic Loading, Y. Fukumotoand G. Lee, Eds., CRC Press, Boca Raton, FL, USA, pp. 123-138.
166. Wakabayashi, M. (1986). Design of arthquake-Resistant Buildings. McGraw-Hill, New York, NY, USA.
167. Wen, Y.K. and Song, S.H. (2003).Structural reliability/redundancy under earthquakes. Journal ofStructural Engineering, ASCE, 129 (1), 56-67.
168. Whittaker, A.S., Uang, C.M. and Bertero, V.V.(1990). An experimental study of the behavior of dual steelsystems. Report No. UCB/EERC-88/14, University of California, Berkeley, CA, USA.
169. Whittaker, A., Hart, G. and Rojahn, C. (1999). Seismic response modification factors.Journal of Structural Engineering, ASCE, 125(4), 438-444.
170. Abrahamson, N.A. and Litehiser, J.J. (1989). Attenuation of vertical peakacceleration. Bulletin of the Seismological Society of America, 79 (3), 549-580.
171. Afra, H. and Pecker, A. (2001). Stochastic characterization of seismicmotion: Application to Eurocode 8 response spectra, European Earthquake Engineering, XV (2), 35-41.
172. Ambraseys, N.N. (1975). Trends inengineering seismology in Europe. Proceedings of the 5th European Conference on Earthquake Engineering, 3, 39-52.
173. Ambraseys, N.N. and Bommer, J.J.(1991). The attenuation of ground accelerations in Europe. Earthquake Engineering and Structural Dynamics, 20(12), 1179-1202.
174. Ambraseys, N.N. and Bommer, J.J. (1992). On the attenuation of groundaccelerations in Europe. Proceedings of the 10th World Conference on Earthquake Engineering, 2, 675-678.
175. Ambraseys, N.N. and Bommer, J.J. (1995).Attenuation relationships for use in Europe: An overview.Proceedings of the 5th SECED Conference on European Seismic Design Practice, Balkema, Rotterdam, pp. 67-74.
176. Ambraseys, N.N. and Douglas, J. (2000).Reappraisal of the effect of vertical ground motions on response.Engineering Seismology and Earthquake Engineering, Research Report No.ESEE 00/4, Imperial College, London, UK.
177. Ambraseys, N.N.and Douglas, J. (2003). Near-field horizontal and verticalearthquake ground motions. Soil Dynamics and Earthquake Engineering, 23 (1), 1-18.
178. Ambraseys, N.N. and Simpson, K.A. (1995).Prediction of vertical response spectra in Europe. Engineering ismology and Earthquake Engineering, Research Report No. ESEE 95/1, Imperial College, London, UK.
179. Ambraseys, N.N. and Simpson, K.A. (1996). Prediction of vertical response spectra in Europe. Earthquake Engineering and Structural Dynamics,25 (4), 401-412.
180. Ambraseys, N.N., Simpson, K.A. and Bommer, J.J. (1996). Prediction ofhorizontal response spectra in Europe. Earthquake Engineering and Structural Dynamics, 25 (4), 371-400.
181. Ambraseys, N.N., Douglas, J., Sarma, S.K. and Smit, P.M. (2005a). Equations for the estimation of strong ground tions from shallow crustal earthquakes using data from Europe and the Middle East: Horizontal peak ground acceleration and spectral acceleration.Bulletin of Earthquake Engineering, 3 (1),1-53.
182. Ambraseys, N.N., Douglas, J., Sarma, S.K. and Smit, P.M. (2005b). Equations for the estimation of strongground motions from shallow crustal earthquakes using data from Europe and the Middle East: Vertical peak ground acceleration and spectral acceleration. Bulletin of Earthquake Engineering, 3 (1),55-73.
183. Aptikaev, F. and Kopnichev, J.(1980). Correlation between seismic vibration parameters andtype of faulting. Proceedings of the 7th World Conference on Earthquake Engineering, Istanbul, Turkey, Vol.1, pp. 107-110.
184. Arias, A.(1970). A measure of earthquake intensity. In Seismic Design for clear Power Plants, R. Hansen, Ed., MIT Press, Cambridge, MA, USA, pp. 438-483.
185. Atkinson, G.M. and Boore, D.M. (1995). Ground motion relations for eastern North America. Bulletin of the Seismological Society of America,85 (1), 17-30.
186. Atkinson, G.M.and Boore, D.M., (1997). Some comparisons between recentground-motion relations. Seismological Research Letters,68 (1), 24-40.
187. Atkinson, G.M.and Boore, D.M. (2006). Earthquake ground-motion prediction uations for eastern North America. Bulletin of the Seismological Society of America, 96 (6), 2181-2205.
188. Bard, P.Y., Bouchon, M., Campillo, M. and Gariel, J.C. (1995). Numerical simulation of strong-motion usingdiscrete wavenumber method: A review of main results. Recent Advances in Earthquake Engineering and Structural Dynamics. Proceedings of the Fifth AFPS/EERI Microzonation Conference, Nice, France.
189. Bathe, K.J. (1996). Finite Element Procedures in Engineering Analysis. Prentice Hall, Englewood Cliffs, NJ, USA.
190. Bolt, B.A. (1973). Duration ofstrong ground motions. Proceedings of the 5th World Conference on Earthquake Engineering, 1, 1304-1313.
191. Bolt, B.A. (1978). Fallacies in current groundmotion prediction. Proceedings of the Second International Conference on Microzonation, San Francisco, CA, USA, Vol. 2, pp. 617-633.
192. Bolt, B.A. (1996).From Earthquake Acceleration to Seismic Displacement: Fifth Mallet-Milne Lecture (Mallet-Milne lecture). John Wiley & Sons, Chichester, England.
193. Bolt, B.A. (1999).Earthquakes. 4th Edition, W.H. Freeman and Company, New York, NY, USA.
194. Bommer, J.J. and Acevedo, A.B.(2004). The use of real earthquake accelerograms as input todynamic analysis. Journal of Earthquake Engineering,8 (1), 43-91.
195. Bommer, J.J. and Elnashai, A.S. (1999). Displacement spectra for seismicdesign. Journal of Earthquake Engineering, 3(4), 1-32.
196. Bommer, J.J. and Martinez-Pereira, A. (1999). The effective duration of earthquakestrong-motion. Journal of Earthquake Engineering , 3 (2), 127-172.
197. Bommer, J.J., Elnashai, A.S.and Weir, A.G. (2000). Compatible and accelerationdisplacement spectra for seismic design codes. Proceedings of the Twelfth World Conference on Earthquake Engineering, Auckland, New Zealand.
198. Boore, D.M. (1983).Stochastic simulation of high-frequency ground motions based onseismological models of the radiated spectra. Bulletin of the Seismological Society of America, 73 (6, Part A), 1865-1894.
199. Boore, D.M.(2005). Erratum: Equations for estimating horizontal responsespectra and peak acceleration from western North American earthquakes: A summary ecent work. Seismological Research Letters, 76(3), 368-369.
200. Boore, D.M. and Atkinson, G.M. (2007). Boore-Atkinson NGA ground motion relations for geometric mean horizontal component of peak and spectral ground motionparameters. Pacific Earhquake Engineering Research Center, Report No. 2007/01, Berkeley, CA, USA.
201. Boore, D.M. and Joyner, W.B. (1982). The empirical prediction of groundmotion. Bulletin of the Seismological Society of America,72 (6, Part B), S43-S60.
202. Boore, D.M., Joyner, W.B. and Fumal, T.E. (1993).Estimation of response spectra and peak accelerations from western North American earthquakes: An interim report. US Geological Survey Open-File Report, pp. 93-509.
203. Boore, D.M., Joyner, W.B. and Fumal, T.E. (1994). Estimation of response spectra peak accelerations from western North American earthquakes: An interim report-Part 2. US Geological Survey Open-File Report, pp. 94-127.
204. Boore, D.M., Joyner, W.B. and Fumal, T.E. (1997). Equations for estimating horizontal response spectra andeak acceleration from western North American earthquakes: A summary of recentwork. Seismological Research Letters, 68(1), 128-153.
205. Borzi, B. and Elnashai, A.S. (2000). Refined force reduction factors for seismicdesign. Engineering Structures, 22 (10),1244-1260.
206. Borzi, B., Elnashai, A.S., Faccioli, E., Calvi, G.M. and Bommer, J.J. (1998). Inelastic spectra andductility-damping relationships for displacement-based seismic design.ESEE Research Report No. 98-4, Imperial College, London, UK.
207. Borzi, B., Calvi, G.M., Elnashai, A.S., Faccioli, E.and Bommer, J.J. (2001). Inelastic spectra fordisplacement-based seismic design. Journal of Soil Dynamics and Earthquake Engineering, 21 (1), 47-61.
208. Bozorgnia, Y. and Bertero, V.V. (2004). Earthquake Engineering. From Engineering Seismology to Performance-Based Engineering. CRC Press, Boca Raton, FL, USA.
209. Bozorgnia, Y., Niazi, M. and Campbell, K.W. (1994).Characteristics of the free-field vertical ground motion during the Northridge earthquake. Earthquake Spectra, 23(4), 515-525.
210. Bozorgnia, Y., Campbell, K.W. Niazi, M. (2000). Observed spectral characteristics ofvertical ground motion recorded during worldwide earthquakes from 1957 to1995. Proceedings of the 12th World Conference on Earthquake Engineering, New Zealand, Paper No. 2671, CD-ROM.
211. Broderick, B.M. and Elnashai, A.S. (1996). Seismic ponse of composite frames, I: Response criteria and input motion.Engineering Structures, 18 (9), 696-706.
212. Broderick, B.M., Elnashai, A.S., Ambraseys, N.N., Barr, J.M., Goodfellow, R.G. and Higazy, E.M. (1994). The Northridge (California) Earthquake of 17 January 1994: Observations, strong-motion and correlative response analysis. Engineering Seismologyand Earthquake Engineering, Research Report No. ESEE 94/4, Imperial College, London, UK.
213. Building Standard Law of Japan(BSL). (2004). Building Research Institute,Tokyo, Japan.
214. Bycroft, G.N.(1960). White noise representation of earthquakes.Journal of the Engineering Mechanics Division, ASCE, 86(EM2), 1-16.
215. Campbell, K.W.(1985). Strong-motion attenuation relationships: A ten-yearprospective. Earthquake Spectra, 1 (4),759-804.
216. Campbell, K.W. (1993).Empirical prediction of near-source ground motion from largeearthquakes. Proceedings of the International Workshop on Earthquake Hazard and Large Dams in the Himalaya, New Delhi, India.
217. Campbell, K.W. (1997).Empirical near-source attenuation relationships for horizontal and vertical onents of peak ground acceleration, peak ground velocity, and pseudo-absoluteacceleration response spectra. Seismological Research Letters,68 (1), 154-179.
218. Campbell, K.W.and Bozorgnia, Y. (2003). Updated near-source ground-motion attenuation) relations for the horizontal and vertical components of peakground acceleration and acceleration response spectra. Bulletin ofthe Seismological Society of America, 93 (1),314-331.
219. Campbell, K.W. and Bozorgnia, Y.(2007). Campbell-Bozorgnia NGA ground motion relations for thegeometric mean horizontal component of peak and spectral ground motionparameters. Pacific Earhquake Engineering Research Center, Report No. 2007/02, Berkeley, CA, USA.
220. Chandler, A.M.(1991). Evaluation of site-dependent spectra for earthquake-resistant design of structures in Europe and North America.Proceedings of the Institution of Civil Engineers, Part 1,605-626.
221. Chang, F.K. d Krinitzsky, E.L.(1977). Duration, spectral content and redominant period ofstrong-motion earthquake records from western United States.Miscellaneous Paper 5-73-1, US Army Corps of Engineers Waterways Experiment Station, Vicksburg, MS, USA.
222. Chapman, M.C. (1999). On the use of elastic input energy for seismic azard analysis. Earthquake Spectra, 15(4), 607-635.
223. Chopra, A.K.(2002). Dynamics of Structures: Theory and Applications to Earthquake Engineering. 2nd Edition, Prentice Hall College Division, Upper Saddle River, New Jersey, USA.
224. Chopra, A.K. and Goel, R.K. (1999). Capacity-demand-diagrammethods based on inelastic design spectrum. Earthquake ectra,15 (4), 637-656.
225. Clough, R.W.and Penzien, J. (1993). Dynamics of Structures.McGraw-Hill, New York, NY, USA.
226. JrCoffin, L.F.. (1954). A study of the effect of cyclic thermalstress in ductile metals. Transactions of ASME, 76,931-950.
227. Collier, C.J. and Elnashai, A.S.(2001). A procedure for combining horizontal and verticalseismic action effects. Journal of Earthquake Engineering,5 (4), 521-539.
228. Coppersmith, K.S. and Youngs, R.R. (1990). Improved methods for seismichazard analysis in the Western United States. Proceedings of the 4th National Conference on Earthquake Engineering, 1, 723-731.
229. Cornell, C.A. (1968). Engineering eismic risk analysis. Bulletin of the Seismological Society of America, 58 (4), 1583-1606.
230. Cornell, C.A., Falayer, F., Hamburger, R.O. and Foutch, D.A.(2002). Probabilistic basis for 2000 SAC Federal Emergency Management Agency Steel Moment Frame Guidelines. Journal of Structural Engineering, ASCE, 128 (4), 526-533.
231. Cosenza, E., Manfredi, G. and Ramasco, R.(1993). The use of damage functionals in earthquake engineering: comparison between different methods. Earthquake Engineering and Structural Dynamics, 22 (10), 855-868.
232. Crouse, C.B. (1991). Ground-motion attenuation equations for earthquakes on the Cascadia subductionzones. Earthquake Spectra, 7 (2),201-236.
233. Dahle, A., Bungum, H. and Kvamme, L.(1990). Attenuation models inferred from intraplate earthquakerecordings. Earthquake Engineering and Structural Dynamics,19 (8), 1125-1141.
234. Deodatis, G.and Shinozouka, M. (1989). Simulation of seismic groundmotion using stochastic waves. Journal of Engineering Mechanics, ASCE, 115 (12), 2723-2737.
235. Dobry, R., Idriss, I.M. and Ng, E. (1978). Duration characteristics of orizontal components of strong-motion earthquakerecords. Bulletin Seismological Society of America,68 (5), 1487-20.
236. Douglas, J. (2001). A comprehensive worldwide summary of strong-motion attenuation relationships for peak ground acceleration and spectralordinates (1969 to 2000). ESEE Research Report No. 01-1, Department of Civil Engineering and Environmental Engineering, Imperial College, London, UK.
237. Douglas, J. (2002).Errata of and additions to ESEE Report No. 01-1 'A comprehensive worldwidesummary of strong-motion attenuation relationships for peak ground accelerationand spectral ordinates (1969 to 2000)'. Department Research Report, Department of Civil Engineering and Environmental Engineering, Imperial College, London, UK.
238. Douglas, J. (2004).Ground motion estimation equations 1964 to 2003. Re-issue of ESEE Research Report No. 01-1 'A comprehensive worldwide summary of strong-motion attenuationrelationships for peak ground acceleration and spectral ordinates (1969 to2000)'. Technical Report No.04-001-SM. Department of Civil Engineering and Environmental Engineering, Imperial College, London, UK.
239. Douglas, J. (2006). Errata ofand additions to 'Ground motion estimation equations 1964-2003'.ESEE Research Report No. 01-6, Department of Civil Engineering and Environmental Engineering, Imperial College, London, UK.
240. Elghadamsi, F.E. and Mohraz, B. (1987). Inelasticearthquake spectra. Earthquake Engineering and Structural Dynamics, 15 (1), 91-104.
241. Elnashai, A.S. (1998). Use of real earthquaketime-histories in analytical seismic assessment of structures. HMNuclear Installations Directorate (NII) Report.
242. Elnashai, and Papazoglou, A.J. (1997). Procedure and spectra fornalysis of RC structures subjected to strong vertical earthquake loads.Journal of Earthquake Engineering, 1 (1),121-155.
243. Elnashai, A.S., Bommer, J.J., Baron, I., Salama, A.I. and Lee, D. (1995). Selected Engineering Seismology and Structural Engineering Studies of the Hyogo-ken Nanbu (Kobe, Japan) Earthquake of 17 January 1995. Engineering Seismology and Earthquake Engineering, Report No. ESEE/95-2, Imperial College, London, UK.
244. Esteva, L. and Villaverde, R. (1973). Seismic risk, design spectra and structural reliability. Proceedings of the 5th World Conference on Earthquake Engineering, Rome, Italy, Vol. 2, pp. 2586-2596.
245. Eurocode 8 (2004). Design provisions forearthquake resistance of structures. Part 1.3: General rules.Specific rules for various materials and elements. European Communities for Standardisation, Brussels, Belgium.
246. Fajfar, P.(1995). Elastic and inelastic spectra. Proceedings of 0th European Conference on Earthquake Engineering, 2,1169-1178.
247. Fajfar, P. (1998).Capacity spectrum method based on inelastic demand spectra.Report EE-3/98, IKPIR, Ljubljana, Slovenia.
248. Fernandez, J.A. (2007). Numerical Simulation of Earthquake Ground Motions in the Upper Mississippi Embayment. PhD Thesis, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, GA, USA.
249. Fernandez, J.A. and Rix, G.J. (2006). Soil attenuation relationships and seismichazard analyses in the Upper Mississippi Embayment. Proceedings ofthe 8th National Conference on Earthquake Engineering 8NCEE, San Francisco, CA, CD-ROM.
250. Frankel, A., Mueller, C., Barnhard, T., Perkins, D., Leyendecker, E.V., Dickman, N., Hanson, S. and Hopper, M.(1996). National Seismic Hazard Maps: Documentation.OFR 96-532, US Geological Survey.
251. Free, M.W. (1996) The Attenuation of Earthquake Strong-Motion in Intraplate Regions. PhD Thesis, Imperial College, London, UK.
252. Freeman, S.A. (1998). The capacity spectrum method as a tool forseismic design. Proceedings of the 11th European Conference on Earthquake Engineering, Paris, France, CD-ROM.
253. Frohlich, C. and Apperson, K.D. (1992). Earthquake focal mechanisms, moment tensors, and the consistency of seismic activity near plateboundaries. Tectonics, 11 (2), 279-296.
254. Fukushima, Y., Gariel, J.C. and Tanaka, R.(1995). Site-dependent attenuation relations of seismic motionparameters at depth using borehole data. Bulletin of the Seismological Society of America, 85 (6), 1790-.
255. Gariel, J.C., Archuleta, R.J. and Bouchon, M.(1990). Rupture process of an earthquake with kilometric sizefault inferred from near source records. Bulletin of the Seismological Society of America, 8 (2), 870-888.
256. Gasparini, D.A. and Vanmarcke, E.H.(1976). Simulated earthquake motions compatible with prescribedresponse spectra. Department of Civil Engineering,Research Report R76-4, Massachusetts Institute of Technology, Cambridge, MA, USA.
257. Gutenberg, B. and Richter, C.F.(1954). The Seismicity of the Earth. Princeton University Press, Princeton, NJ, USA.
258. Hancock, J. and Bommer, J.J. (2005). The effective number of cycles ofearthquake ground motion. Earthquake Engineering and Structural Dynamics, 34 (6), 637-664.
259. Housner, G.W. (1952). Spectrum intensities ofstrong-motion earthquakes. Proceedings of Symposium on Earthquakeand Blast Effects on Structures, EERI.
260. Housner, G.W. (1956). Limit design of structures to resist earthquakes.Proceedings of the 1st World Conference on Earthquake Engineering, 5-1 to , Berkeley, CA, USA.
261. Housner, G.W.(1959). Behavior of structures during earthquakes.Journal of Engineering Mechanics Division, ASCE, 85(EM-4), 109-129.
262. Housner, G.W.(1965). Intensity of ground motion shaking near the causativefault. Proceedings of the 3rd World Conference on Earthquake Engineering, Vol. 1, Auckland, New Zealand, pp.81-94.
263. Hughes, T.J.R. (1987). The te Element Method. Prentice Hall, Englewood Cliffs, NJ, USA.
264. Husid, L.R. (1969). Characteristicas de terremotos. Analis general. Revista del IDIEM, Santiago, 8, 21-42.
265. Kalkan, E. Gulkan, P. (2004). Empirical attenuation equations forvertical ground motion in Turkey. Earthquake Spectra,20 (3), 853-882.
266. Kamiyama, M. (1995). An attenuation model for the peak values ofstrong ground motions with emphasis on local soil effects.Proceedings of the 1st International Conference on Earthquake Geotechnical Engineering, 1, 579-585.
267. Kanai, K. (1983). Engineering Seismology. Universityof Tokyo Press, Tokyo, Japan.
268. Kawashima, K. and Aizawa, K. (1989). Bracketed and normalized durations of earthquake nd accelerations. Earthquake Engineering and Structural Dynamics, 18, 1041-1051.
269. Kawashima, K., Aizawa, K. and Takahashi, K. (1986). Attenuation ofpeak ground acceleration, velocity and displacement based on multiple regression ysis of Japanese strong-motion records. Earthquake Engineering and Structural Dynamics, 14 (2), 199-215.
270. Kramer, S.L. (1996). Geotechnical hquake Engineering. Prentice Hall, Upper Saddle River, NJ, USA.
271. Krawinkler, H. and Nassar, A.A.(1992). Seismic design based on ductility and cumulative damagedemand and capacities. In Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings, P. Fajfar and H. Krawinkler, Eds., Elsevier Applied Science, New York, NY, USA.
272. Kunnath, S.K. and Chai, Y.H. (2004). Cumulative damage-based inelastic cyclic nd spectrum. Earthquake Engineering and Structural Dynamics,33 (4), 499-520.
273. Idriss, I.M. (1978). Characteristics of earthquake roundmotions. Proceedings of the Geotechnical Engineering Division Specialty Conference: Earthquake Engineering and Soil Dynamics, ASCE,III, 1151-1265.
274. Iervolino, I. and Cornell, C.A. (2005). Record selection for nonlinear seismicanalysis of structures. Earthquake Spectra, 21(3), 685-713.
275. Inel, M., Bretz, E.M., Black, E.F. Ascheim, M.A. and Abrams, D.P. (2001). USEE 2001:Utility Software for Earthquake Engineering. Report and User's Manual.Mid America Earthquake Center Report, University of Illinois at Urbana-Champaign, IL, USA.
276. Iwasaki, T., Kawashima, K. and Saeki, (1980). Effects of seismic and geotechnical conditions onmaximum ground accelerations and response spectra. Proceedings of the th World Conference on Earthquake Engineering, 2, 813-190.
277. Jennings, P.C. (1985). Groundmotion parameters that influence structural damage. In Strong-motion Simulation and Earthquake Engineering Applications-A Technological Assessment, R.E. Scholl and J.L. King, Eds., Earthquake Engineering Research Institute, Publication No. 85-02.
278. Jeong, G.D. and Iwan, W.D. (1988). The effect of earthquake duration on thedamage of structures. Earthquake Engineering and Structural Dynamics, 16, 1201-1211.
279. Johnson, R.A. (1973). An earthquake spectrum predictiontechnique. Bulletin of the Seismological Society of America,63 (4), 1255-274.
280. Johnston, A.C., Coppersmith, K.J., Kanter, L.R. and Cornell, C.A. (1994).The earthquakes of stable continental egions: Volume 1-Assessment of largeearthquake potential. EPRI Report TR-10 2261-VI, Electric Power Research Institute, Palo Alto, CA, USA.
281. Joyner, W.B. and Boore, D.M. (1981). Peak horizontal acceleration andvelocity from strong-motion records including records from the 1979 Imperial Valley, California earthquake. Bulletin of the Seismological Societyof America, 71 (6), 1479-1480.
282. Joyner, W.B. and Boore, D.M. (1988). Measurement, characterization, and prediction of strong-motion. Proceedings of Earthquake Engineering and Soil Dynamics II, Geotechnical Division, ASCE, pp. 43-102.
283. Joyner, W.B. and Boore, D.M.(1996). Recent developments in strong-motion attenuationrelationships. Proceedings of the 28th Joint Meeting of the US-Japan Cooperative Program in Natural Resource Panel on Wind and Seismic Effects, pp. 101-116.
284. Lee, W.H.K., Kanamori, H., Jennings, P.C. and Kisslinger, C. (2003). International Handbook of Earthquake nd Engineering Seismology. Academic Press, San Diego, CA, USA.
285. Mahin, S.A. and Bertero, V.V.(1981). An evaluation of inelastic seismic design spectra. Journal of Structural Engineering, ASCE, 107 (9),1777-1795.
286. Malhotra, P.K. (2002).Cyclic-demand spectrum. Earthquake Engineering and Structural Dynamics, 31 (7), 1441-1457.
287. Mander, J., Peckan, G. and Chen, S. (1995). Low-cycle variable amplitude fatigue modelling of top-and-seat angleconnections. Engineering Journal, AISC, 32(2), 54-63.
288. Manson, S.S. (1954). Behavior of materials under conditions of thermalstress. NACA TN 2933.
289. Martinez-Rueda, J.E. (1997). Energy Dissipation Devices for Seismic Upgrading of RC Structures. PhD Thesis, University of London, UK.
290. Matsumura, K. (1992). On theintensity measure of strong-motions related to structural failures.Proceedings of the 10th World Conference on Earthquake Engineering,1, 375-380.
291. McGarr, A.(1984). Scaling of ground motion parameters, state of stress and l depth. Journal of Geophysical Research, 89(B8), 6969-6979.
292. McGuire, R.K.(1978). Seismic ground motion parameter relations.Journal of the Geotechnical Engineering Division, ASCE,104 (GT4), 481-490.
293. Miranda, E.and Bertero, V.V. (1994). Evaluation of strength reductionfactor for earthquake-resistance design. Earthquake Spectra,10 (2), 357-379.
294. Mohammadioun, G. (1994). Calculation of site-adapted reference spectrafrom the statistical analysis of an extensive strong-motion databank.Proceedings of the 10th European Conference on Earthquake Engineering, Vienna, Austria, Vol. 1, 177-181.
295. Naeim, F., Alimoradi, A. and Pezeshk, S.(2004). Selection and scaling of ground motion time historiesfor structural design using genetic algorithms. Earthquake Spectra, 20 (2), 413-426.
296. Nau, J.M. and Hall, W.J. (1984). Scaling methodsfor earthquake response spectra. Journal of Structural Engineering, ASCE, 110 (7), 1533-1548.
297. Newmark, N.M. and Hall, W.J. (1969). Seismicdesign criteria for nuclear reactor facilities. Proceedings of the4th World Conference on Earthquake Engineering, Santiago, Chile, B-4, pp. 37-50.
298. Newmark, N.M. and Hall, W.J.(1982). Earthquake Spectra and Design, EERIMonograph Series, EERI, Oakland, CA, USA.
299. Newmark, N.M., Blume, J.A. and Kapur, K.K. (1973). Seismic design spectrafor nuclear power plants. Journal of Power Division,99 (PO2), 287-303.
300. Novikova, E.I.and Trifunac, M.D. (1994). Duration of ground motion interms of earthquake magnitude, epicentral distance, site conditions and sitegeometry. Earthquake Engineering and Structural Dynamics,23 (6), 1023-1043.
301. Nuclear Regulatory Commission (NRC) (2001). Technical Basis for Revision of Regulatory Guidance on Design Ground Motions:Hazard-and Risk-Consistent Ground Motion Spectra Guidelines. NUREG/CR-6728, Government Printing Office, Washington, DC, USA.
302. Papazoglou, A. and Elnashai, A.S. (1996).Analytical and field evidence of the damaging effect of vertical earthquake und motion. Earthquake Engineering and Structural Dynamics,25 (10), 1109-1137.
303. Power, M., Chiou, B., Abrahamson, N. and Roblee, C. (2006). The Next Generation of Ground Motion Attenuation Models (NGA) project: An overview. Proceedings of the 8th National Conference on Earthquake Engineering 8NCEE, San Francisco, CA, USA, Paper No. 2022, CD-ROM.
304. Reiter, L. (1990). Earthquake Hazard Analysis-Issues and Insights. Columbia University Press, New York, NY, USA.
305. Rinaldis, D., Berardi, R., Theodulidis, N. and Margaris, B. (1998). Empirical predictive models based on a nt Italian and Greek strong-motion database: I. Peak ground acceleration andvelocity. Proceedings of the 11th European Conference on Earthquake ineering, Balkema, Rotterdam.
306. Saatcioglu, M. and Ozcebe, G. (1989). Response of reinforced concrete columns tosimulated seismic loading. ACI Structural Journal,86 (1), 3-12.
307. Sadek, F., Mohraz, and Riley, M.A. (2000). Linear procedures for structuresith velocity-dependent dampers. Journal of Structural Engineering, ASCE, 128 (8), 887-895.
308. Sarma, S.K. and Srbulov, M. (1996). A simplifiedmethod for prediction of kinematic soil-foundation interaction effects on peakhorizontal acceleration of a rigid foundation. Earthquake Engineering Structural Dynamics, 25 (8), 815-836.
309. Sarma, S.K. and Srbulov, M. (1998).A uniform estimation of some basic ground motion parameters.Journal of Earthquake Engineering , 2 (2),267-287.
310. Shinozouka, M. and Deodatis, G.(1988). Stochastic process models for earthquake groundmotion. Journal of Probabilistic Engineering Mechanics,3 (3), 499-519.
311. Silva, W., Gregor, N. and Darragh, R. (2003). Development of Regional Hard Rock Attenuation Relations for Central and Eastern North America, Mid-Continent and Gulf Coast Areas. Pacific Engineering and Analysis, El Cerrito, CA, USA.
312. Skarlatoudis, A., Theodulidis, N., Papaioannou, C. and Roumelioti, Z. (2004). The dependenceof peak horizontal acceleration on magnitude and distance for small magnitudeearthquakes in Greece. Proceedings of Thirteenth World Conferenceon Earthquake Engineering, Paper No. 1857, CD-ROM.
313. Somerville, P.G., Smith, N.F., Graves, R.W. and Abrahamson, N.A.(1997). Modification of empirical strong-motion attenuationrelations to include the amplitude and duration effects of rupturedirectivity. Seismological Research Letters, 68(1), 199-222.
314. Spudich, P., Fletcher, J.B., Hellweg, M., Boatwright, J., Sullivan, C., Joyner, W.B., Hanks, T.C., Boore, D.M., McGarr, A., Baker, L.M. and Lindh, A.G. (1997).SEA96-A new predictive relation for earthquake ground motions inextensional tectonic regimes. Seismological Research Letters,68 (1), 190-198.
315. Spudich, P., Joyner, W.B., Lindh, A.G., Boore, D.M., Margaris, B.M. and Fletcher, J.B.(1999). SEA99-A revised ground motion prediction relation foruse in extensional tectonic regimes. Bulletin of the Seismological Society of America, 89 (5), 1156-1170.
316. Stamatovska, S. (2002). A newazimuth dependent empirical strong-motion model for Vranchea subductionzone. Proceedings of the Twelfth European Conference on Earthquake Engineering. Paper No. 324, CD-ROM.
317. Takahashi, T., Kobayashi, S., Fukushima, Y., Zhao, J.X., Nakamura, H. and Somerville, P.G. (2000). A spectral attenuation model for Japan using strong-motion data base. Proceedings of the 6th International Conferenceon Seismic Zonation: Managing Earthquake Risk in the 21st Century, Earthquake Engineering Research Institute, Oakland, CA, USA.
318. Tolis, S.V. and Faccioli, E. (1999). Displacement designspectra. Journal of Earthquake Engineering, 3(1), 107-125.
319. Tong, H. and Katayama, T. (1988) Peak acceleration attenuation by eliminating the ill-effect of the correlation between magnitude and epicentral distance. Proceedings the 9th World Conference on Earthquake Engineering, II, 349-354.
320. Trifunac, M.D. and Brady, A.G. (1975). A study ofthe duration of strong earthquake ground motion. Bulletin Seismological Society of America, 65 (3), 581-626.
321. Trifunac, M.D. and Brady, A.G. (1976). Correlations of peak, velocity and displacement with earthquake magnitude, distance and site conditions. Earthquake Engineering and Structural Dynamics, 4 (5), 455-471.
322. Tso, W.K., Zhu, T.J. and Heidebrecht, A.C. (1992).Engineering applications of ground motion a/v ratio. Soil Dynamics and Earthquake Engineering, 11 (3),133-144.
323. Uang, C.M. (1991).Establishing R (R w) and C d factors for buildings seismicprovisions. Journal of Structural Engineering, ASCE,117 (1), 19-28.
324. Vanmarcke, E.H.and Lai, S.S. (1980). Strong-motion duration and RMSamplitude of earthquake records. Bulletin Seismological Society of America, 70 (4), 1293-1307.
325. Vidic, T., Fajfar, P. and Fischinger, M. (1994).Consistent inelastic design spectra: Strength and displacement.Earthquake Engineering and Structural Dynamics, 23(5), 507-521.
326. Wesnousky, S., Scholz, C., Shimazaki, K. and Masuda, T. (1984). Integration ofgeological and seismological data for the analysis of seismic hazard: A casestudy of Japan. Bulletin of the Seismological Society of America, 74 (2), 687-708.
327. Whittaker, A., Hart, G. and Rojahn, C. (1999).Seismic response modification factors. Journal of Structural Engineering, ASCE, 125 (4), 438-444.
328. Youngs, R.R., Day, S.M. and Stevens, J.L.(1988). Near field ground motions on rock for large subductionearthquakes. Proceedings of Earthquake Engineering and Soil Dynamics II, Geotechnical Division, ASCE, pp. 445-462.
329. Youngs, R.R., Chiou, S.J., Silva, W.J. and Humphrey, J.R.(1997). Strong ground motion attenuation relationships forsubduction zone earthquakes. Seismological Research Letters,68 (1), 58-73.
330. Zhu, T.J., Heidebrecht, A.C. and Tso, W.K. (1988). Effect of peakground acceleration to velocity ratio on the ductility demand of inelasticsystems. Earthquake Engineering and Structural Dynamics,16 (1), 63-79.
331. Akiyama, H.(1985). Earthquake-Resistant Limit-State Design for Buildings. University of Tokyo Press, Tokyo, Japan.
332. Allen, D.E. (1975). Limit states design: Aprobabilistic study. Canadian Journal of Civil Engineering,2 (1), 36-49.
333. Anderson, J.C. and Gurfinkel, G. (1975). Seismic behaviour of framedtubes. Earthquake Engineering and Structural Dynamics,4 (2), 145-162.
334. Antoniou, S. and Pinho, R. (2004a). Advantages and limitations of adaptiveand non-adaptive force-based pushover procedures. Journal of Earthquake Engineering, 8 (4), 497-522.
335. Antoniou, S. and Pinho, R. (2004b).Development and verification of a displacement-based adaptive pushoverprocedure. Journal of Earthquake Engineering, 8(5), 643-661.
336. Aydinoglu, M.N.(2004). An improved pushover procedure for engineering practice: ncremental response spectrum analysis (IRSA). Proceedings of the Workshop " Performance-based seismic design. Concepts and implementation." PEER Report No. 2004/05, pp. 345-356.
337. Baker, J.W. and Cornell, C.A. (2003). Uncertaintyspecification and propagation for loss estimation using FOSM methods.Pacific Earthquake Engineering Research Center, PEER Report 2003/07, College of Engineering, University of California, Berkeley, CA, USA.
338. Baker, J.F. and Heyman, J. (1969).Plastic Design of Frames 1: Fundamentals. Cambridge University ress, Cambridge, England.
339. Balendra, T.(1993). Vibration of Buildings to Wind and Earthquake Loads. Springer-Verlag, London, UK.
340. Balendra, T. and Huang, X. (2003). Overstrengthand ductility factors for steel frames designed according to BS 5950.Journal of Structural Engineering, ASCE, 129(8), 1019-1035.
341. Bathe, K.J.(1996). Finite Element Procedures in Engineering Analysis. Prentice Hall, Englewood Cliffs, NJ, USA.
342. Bazzurro, P. and Cornell, C.A. (1994). Seismic Hazard Analysis of Nonlinear Structures I: Methodology. Journal of Structural Engineering, ASCE, 120 (11), 3320-3344.
343. Berry, M.P. (2006). Performance Modeling Strategies for Modern Reinforced Bridge Columns. PhD Thesis, Department of Civil and Environmental Engineering, University of Washington, Washington, DC, USA.
344. Bertero, V.V.(1977). Strength and deformation capacities of buildings underextreme environments. In Structural Engineering and Structural Mechanics, K.S. Pister, Ed., Prentice-Hall, Englewood Cliffs, NJ, USA, pp. 211-215.
345. Bommer, J.J., Elnashai, A.S. and Weir, A.G. (2000). Compatible acceleration and displacementspectra for seismic design codes. Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand, Paper No. 207, CD-ROM.
346. Bozorgnia, Y. and Bertero, V.V.(2004). Earthquake Engineering. From Engineering Seismology to Performance-Based Engineering. CRC Press, Boca Raton, FL, USA.
347. Bracci, J.M., Kunnath, S.K. and Reinhorn, A.M.(1997). Seismic performance and retrofit evaluation of RCstructures. Journal of Structural Engineering, ASCE,123 (1), 3-10.
348. Broderick, B.M.and Elnashai, A.S. (1996). Seismic response of compositeframes. I-Response criteria and input motions. Engineering Structures, 18 (9), 696-706.
349. Broderick, B.M., Elnashai, A.S. and Izzuddin, B.A.(1994). Observations on the effect of numerical dissipation onthe nonlinear dynamic response of structural systems. Engineering Structures, 16 (1), 51-62.
350. Bruneau, M., Uang, C.M. and Whittaker, A. (1998).Ductile Design of Steel Structures. McGraw-Hill, New York, NY, USA.
351. Burdette, N.J. and Elnashai, A.S.(2008). The effect of asynchronous earthquake motion on complexbridges. Part II: Results and implication on assessment. Journal of Bridge Engineering, ASCE, 13 (2), 166-172.
352. Burdette, N.J., Elnashai, A.S., Lupoi, A. and Sextos, A.G. (2008). Effect of asynchronous earthquake motion oncomplex bridges. Part I: Methodology and input motion. Journal of Bridge Engineering, ASCE, 13 (2), 158-167.
353. Chen, W.F. (1982). Plasticity in Reinforced Concrete. McGraw-Hill, New York, NY, USA.
354. Chen, W.F. and Saleeb, A.F. (1982). Constitute Equations for Engineering Materials: Elasticity and Modelling. Vol. 1, John Wiley & Sons, New York, NY, USA.
355. Chopra, A.K. (2002). Dynamicsof Structures: Theory and Applications to Earthquake Engineering. 2nd Edition, Prentice Hall College Division, Upper Saddle River, New Jersey, USA.
356. Chopra, A.K. and Chintanapakdee, C. (2004).Evaluation of modal and FEMA pushover analyses: Vertically 'regular 'andirregular generic frames. Earthquake Spectra, 20(1), 255-271.
357. Chopra, A.K. and Goel, R.K. (2002). A modal pushover analysis procedure forestimating seismic demands for buildings. Earthquake Engineering and Structural Dynamics, 31 (3), 561-582.
358. Chrysostomou, C.Z., Gergely, P. and Abel, J.F.(1992). Nonlinear seismic response of infilled steel frames. Proceedings of the 10th World Conference on Earthquake Engineering, Madrid, Spain, Vol. 8, pp. 4435-4437.
359. Clough, R.W.and Johnston, S. (1966). Effect of stiffness degradation onearthquake ductility requirements. Transactions of Japan Earthquake Engineering Symposium, Tokyo, Japan, pp. 195-198.
360. Clough, R.W. and Penzien, J. (1993). Dynamics of Structures. McGraw-Hill, New York, NY, USA.
361. Collier, C.J. and Elnashai, A.S.(2001). A procedure for combining horizontal and verticalseismic action effects. Journal of Earthquake Engineering,5 (4), 521-539.
362. Collins, M.P. (1978). Towards a rational theory for RC members in shear. ASCE Proceedings, 104 (ST 4), 649-666.
363. Collins, M.P., Mitchell, D., Adebar, P. and Vecchio, F.J. (1996). A general sheardesign method. ACI Structural Journal, 93(1), 36-45.
364. Comite Euro-International DuBeton (CEB) (1996). RC Frames Under Earthquake Loading. State ofthe Art Report. Thomas Telford, London, UK.
365. Cook, R.D., Malkus, D.S., Plesha, M.E. and Witt, R.J. (2002). Concepts and Applications of Finite Element Analysis. 4th Edition, John Wiley & Sons, New York, NY, USA.
366. Cordova, P.P. and Deierlein, G.G.(2005). Validation of the seismic performance of composite frames:full-scale testing, analytical modeling and seismic design. The John A. Blume Earthquake Engineering Research Center, Report No. 155, Department of Civil and Environmental Engineering, Stanford University, Stanford, CA, USA.
367. Cornell, C.A. (1968). Engineering seismic riskanalysis. Bulletin of the Seismological Society of America,58 (4), 1583-1606.
368. Cornell, C.A., Jalayer, F., Hamburger, R.O. and Foutch, D.A. (2002).Probabilistic basis for 2000 SAC Federal Emergency Management Agency steelmoment frame guidelines. Journal of Structural Engineering, ASCE, 128 (4), 526-533.
369. Der Kiureghian, A. (1980). Probabilistic modalcombination for earthquake loading. Proceedings of the 7th World Conference on Earthquake Engineering, Istanbul, Turkey, Vol. 6, pp. 729-736.
370. Di Sarno, L. (2002). Dynamic Response of Tall Framed Buildings Under Environmental Actions. PhD Thesis, University of Salerno, Salerno, Italy.
371. Di Sarno, L. and Elnashai, A.S. (2003). special metals for Seismic Retrofitting of Steel and Composite Buildings. Journal of Progress in Structural Engineering and Materials, 5 (2), 60-76.
372. Dokainish, M.A. and Subbaraj, K. (1989). A survey of direct time-integration methods in computational structural dynamics-I. Explicit methods. Computers and Structures, 32 (6), 1371-1386.
373. Dymiotis, C., Kappos, A.J. and Chryssanthopoulos, M.K. (1999). Seismic reliability of RC frames with uncertain drift and member capacity. Journal of Structural Engineering, ASCE, 125 (9), 1038-1047.
374. Elnashai, A.S. (2002). Do we really need inelastic dynamic analysis? Journal of Earthquake Engineering, 6 (1), 123-130.
375. Elnashai, A.S. and Elghazouli, A.Y. (1993). Performance of composite steel/concrete members under earthquake loading. Part I:Analytical model. Earthquake Engineering and Structural Dynamics, 22 (4), 315-345.
376. Elnashai, A.S. and Izzuddin, B.A. (1993). Modelling of material non-linearities in steel structures subjected to transient dynamic loading. Earthquake Engineering and Structural Dynamics, 22 (6), 509-532.
377. Elnashai, A.S. and Kwon, O.S. (2007). Distributed analytical modelling of bridges with soil-foundation-structure interaction. Proceedings of the 1st US-Italy Bridge Workshop, Pavia, Italy.
378. Elnashai, A.S. and Mwafy, A.M. (2002). Calibration of force reduction factors of RC buildings. Journal of Earthquake Engineering, 6 (2), 239-273.
379. Elnashai, A.S., Elghazouli, A.Y. and Danesh, A.F.A. (1998). Response of semirigid steel frames to cyclic and earthquake loads. Journal of Structural Engineering, ASCE, 124 (8), 857-867.
380. Elnashai, A.S., Papanikolaou, V. and Lee, D. (2003). Zeus NL-A System for Inelastic Analysis of Structures. Mid-America Earthquake Center, CD-Release, No.03-0, University of Illinois at Urbana-Champaign, IL, USA.
381. El-Tawil, S., Mikesell, T. and Kunnath, S.K. (2000). Effect of local details and yield ration on behavior of FR steel connections. Journal of Structural Engineering, ASCE, 126 (1), 79-87.
382. Erberik, M.A. and Elnashai, A.S. (2004). Fragility analysis of flat-slab structures. Engineering Structures, 26 (7), 937-948.
383. Fardis, M.N. (1994). Analysis and design of reinforced concrete buildings according to Eurocodes 2 and 8. Configuration 3, 5 and 6, Reports on Prenormative Research in Support of Eurocode 8.
384. Federal Emergency Management Agency (FEMA) (2004). NEHRP recommended provisions for seismic regulations for new buildings and other structures, Part 1-Provisions. Report No. FEMA 450, Washington, DC, USA.
385. Gerin, M. and Adebar, P. (2004). Accounting for shear in seismic analysis of concrete structures. Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper no. 1747, CD-ROM.
386. Ghobarah, A. and Biddah, A. (1999). Dynamic analysis of reinforced concrete frames including joint shear deformation. Engineering Structures, 21 (11), 971-987.
387. Ghobarah, A., Abou-Elfath, H. and Biddah, A. (1999). Response-based damage assessment of structures. Earthquake Engineering and Structural Dynamics, 58 (1), 79-104.
388. Goel, R.K. and Chopra, A.K. (1997). Period formulas for moment-resisting frame building. Journal of Structural Engineering, ASCE, 123 (11), 1454-1461.
389. Goel, R.K. and Chopra, A.K. (1998). Period formulas for concrete shear wall buildings. Journal of Structural Engineering, ASCE, 124 (4), 426-433.
390. Goel, R.K. and Chopra, A.K. (2004). Evaluation of modal and FEMA pushover analyses: SAC buildings. Earthquake Spectra, 20 (1), 225-254.
391. Gulkan, P. and Sozen, M.A. (1974). Inelastic responses of reinforced concrete structures to earthquake motions. ACI Journal, 71 (12), 604-610.
392. Gupta, A. and Krawinler, H. (2000). Estimation of seismic drift demands for frame structures. Earthquake Engineering and Structural Dynamics, 29 (9), 1287-1305.
393. Gupta, B. and Kunnath, S.K. (2000). Adaptive spectra-based pushover procedure for seismic evaluation of structures. Earthquake Spectra, 16 (2), 367-391.
394. Hilber, H.M., Hughes, T.J.R. and Taylor, R.L. (1977). Improved numerical dissipation for time integration algorithms in structural dynamics. Earthquake Engineering and Structural Dynamics, 5 (3), 283-292.
395. Kappos, A.J. (1997). Seismic damage indices for R/C buildings: Evaluation of concepts and procedures. Progress in Structural Engineering and Materials, 1 (1), 78-87.
396. Kappos, A.S., Paraskeva, T.S. and Sextos, A.G. (2005). Modal pushover analysis as a means for the seismic assessment of bridge structures. Proceedings of the 4th European Workshop the Seismic Behaviour of Irregular and Complex Structures, Thessaloniki, Greece, Paper No. 49.
397. Karayannis, C.G., Izzuddin, B.A. and Elnashai, A.S. (1994). Application of adaptive analysis to reinforced concrete frames. Journal of Structural Engineering, ASCE, 120 (10), 2935-2957.
398. Kim, K.O. (1993). A review of mass matrices for eigenproblems. Computers & Structures, 46 (6), 1041-1048.
399. Kowalski, M.J., Priestley, M.J.N. and MacRae, G.A. (1995). Displacement-based design of RC bridge columns in seismic regions. Earthquake Engineering and Structural Dynamics, 24 (12), 1623-1643.
400. Krawinkler, H. and Seneviratna, G.D.P.K. (1998). Pros and cons of a pushover analysis of seismic performance evaluation. Engineering Structures, 20 (4-6), 452-464.
401. Krawinkler, H., Medina, R. and Alavi, B. (2003). Seismic drift and ductility demands and their dependance on ground motions. Engineering Structures, 25 (5), 637-653.
402. Kwon, O.H. and Elnashai, A.S. (2006). Analytical seismic assessment of highway bridges with soil-structure interaction. Proceedings of the 4th International Conference on Earthquake Engineering, Taipei, Taiwan, Paper No. 142.
403. Ibarra, L.F, Medina, R.A. and Krawinkler, H. (2005). Hysteretic models that incorporate strength and stiffness deterioration. Earthquake Engineering and Structural Dynamics, 34 (12), 1489-1511.
404. International Organization for Standardization (ISO) (1998). General Principles on Reliability for Structures. Document N. ISO/FDIS 2394, Final Draft.
405. Izzuddin, B.A. (1991). Nonlinear Dynamic Analysis of Framed Structures. PhD Thesis, Department of Civil and Environmental Engineering, Imperial College, London, UK.
406. Izzuddin, B.A. and Elnashai, A.S. (1993). Eulerian formulation for large-displacement analysis of space frames. Journal of Engineering Mechanics, ASCE, 119 (3), 549-569.
407. Jain, S.K. (1983). Analytical models for the dynamics of buildings. Earthquake Engineering Research Laboratory, Report No. EERL 83-02, California Institute of Technology, Pasadena, CA, USA.
408. Jeong, S.H. and Elnashai, A.S. (2005). Analytical assessment of an irregular RC frame for full-scale pseudo-dynamic testing. Part I: Analytical model verification. Journal of Earthquake Engineering, 9 (1), 95-128.
409. Joint Committee on Structural Safety (JCSS) (2001). Assessment of Existing Structures. JCSS-RILEM Publication, Cachan, France.
410. Madas, P.J. and Elnashai, A.S. (1992a). A new passive confinement model for transient analysis of reinforced concrete structures. Earthquake Engineering and Structural Dynamics, 21 (5), 409-431.
411. Madas, P.J. and Elnashai, A.S. (1992b). A component-based model for beam-column connections. Proceedings of the 10th World Conference on Earthquake Engineering, Spain, Vol. 8, pp. 4495-4499.
412. Mainstone, R.J. (1974). Supplementary note on the stiffness and strength of infilled frames. Current Paper CP 13/74, Building Research Station Garston, Watford, UK.
413. Mander, J.B., Priestley, M.J.N. and Park, R. (1988). Theoretical stress-strain model for confined concrete. Journal of Structural Engineering, ASCE, 114 (8), 1804-1826.
414. Martinez-Rueda, J.E. and Elnashai, A.S. (1997). Confined concrete model under cyclic load. Journal of Materials and Structures, 30 (4), 139-147.
415. Mazzolani, F.M. and Piluso, V. (1996). Theory and Design of Seismic Resistant Steel Frames. E & FN Spon, London, UK.
416. Menegotto, M. and Pinto, P.E. (1973). Method of analysis for cyclically loaded RC plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending. Preliminary Report IABSE, 13, pp. 15-22.
417. Miranda, E. and Aslani, H. (2003). Building-specific loss estimation methodology. PEER Report No. 2003-03, Pacific Earthquake Engineering Research Center, University of California at Berkeley, Berkeley, CA, USA.
418. Mitra, N. and Lowes, L.N. (2007). Evaluation, calibration and verification of a reinforced concrete beam-column joint model. Journal of Structural Engineering, ASCE, 133 (1), 105-120.
419. Monti, G., Nuti, C. and Pinto, P.E. (1996). Nonlinear response of bridges under multisupport excitation. Journal of Structural Engineering, ASCE, 122 (10), 1146-1159.
420. Mylonakis, G., Papastamatiou, D., Psycharis, J. and Mahmoud, K. (2001). Simplified modeling of bridge response on soft soil to nonuniform seismic excitation. Journal of Bridge Engineering, ASCE, 6 (6), 587-597.
421. Nader, M.N. and Astaneh, A.A. (1989). Experimental studies if a single storey steel structure with fixed, semi-rigid and flexible connections. Earthquake Engineering Research Center, Report No. EERC/ 89-15, University of California, Berkeley, CA, USA.
422. Nassar, A.A. and Krawinkler, H. (1991). Seismic demands for SDOF and MDOF systems. The John Blume Earthquake Engineering Center, Report No. 95, Stanford University, Stanford, CA, USA.
423. Negro, P., Mola, E., Molina, F.J. and Magonette, G.E. (2004). Full-scale PSD testing of a torsionally unbalanced three-storey non-seismic RC frame. Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, British Columbia, Canada, CD-ROM.
424. Nowak, A.S. and Collins, K.R. (2000). Reliability of Structures. McGraw-Hill Higher Education, New York, USA.
425. Papanikolaou, V.K., Elnashai, A.S. and Pareva, J.F. (2006). Evaluation of conventional and adaptive pushover analysis II: Comparative results. Journal of Earthquake Engineering, 10 (1), 127-151.
426. Park, R. (1988). Ductility evaluation from laboratory and analytical testing. Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, Vol. VIII, pp. 605-616.
427. Park, Y.J., Reinhorn, A.M. and Kunnath, S.K. (1987). IDARC: Inelastic damage analysis of reinforced concrete frame-shear-wall structures. National Center for Earthquake Engineering Research, Report No. NCEER-87-0008, Buffalo, NY, USA.
428. Price, T.E. and Eberhard, M.O. (1998). Effects of spatially varying ground motions on short bridges. Journal of Structural Engineering, ASCE, 124 (8), 948-955.
429. Priestley, M.J.N. (2003). Myths and Fallacies in Earthquake Engineering Revisited. The Mallet Milne Lecture. IUSS Press, Pavia, Italy.
430. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996). Seismic Design and Retrofit of Bridges. John Wiley & Sons, New York, NY, USA.
431. Saiidi, M. and Sozen, M.A. (1979). Simple and complex models for nonlinear seismic response of reinforced concrete structures. Department of Civil Engineering, Structural Research Series 465, University of Illinois at Urbana-Champaign, IL, USA.
432. Sextos, A.G., Pitilakis, K.D. and Kappos, A.J. (2003a). Inelastic dynamic analysis of RC bridges accounting for spatial variability of ground motion, site effects and soil-structure interaction phenomena. Part 1: Methodology and analytical tools. Earthquake Engineering and Structural Dynamics, 32 (4) 607-627.
433. Sextos, A.G., Pitilakis, K.D. and Kappos, A.J. (2003b). Inelastic dynamic analysis of RC bridges accounting for spatial variability of ground motion, site effects and soil-structure interaction phenomena. Part 2: Parametric study. Earthquake Engineering and Structural Dynamics, 32 (4) 629-652.
434. Shibata, A. and Sozen, M.A. (1976). Substitute structure method for seismic design in reinforced concrete. Journal of Structural Division, ASCE, 102 (ST 1), 1-18.
435. Spacone, E., Filippou, F.C. and Taucer, F.F. (1996a). Fibre beam-column model for non-linear analysis of R/C frames. Part I. Formulation . Earthquake Engineering and Structural Dynamics, 25 (7), 711-725.
436. Spacone, E., Filippou, F.C. and Taucer, F.F. (1996b). Fibre beam-column model for non-linear analysis of R/C frames. Part II. Applications. Earthquake Engineering and Structural Dynamics, 25 (7), 727-742.
437. Stafford-Smith, B. (1968). Model test results of vertical and horizontal loading of infilled frames. Journal of American Concrete Institute, 65, 618-624.
438. Stewart, J.P., Fenves, G.L. and Seed, R.B. (1999). Seismic soil-structure interaction in buildings. I: Analytical methods. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125 (1), 26-37.
439. Subbaraj, K. and Dokainish, M.A. (1989). A survey of direct time-integration methods in computational structural dynamics-I. Implicit methods. Computers and Structures, 32 (6), 1387-1401.
440. Taghavi, S. and Miranda, E. (2003). Response assessment of nonstructural elements. PEER Report No. 2003-04, Pacific Earthquake Engineering Research Center, Richmond, CA, USA.
441. Takayanagi, T. and Schnobrich, W. (1979). Non-linear analysis of coupled walls. Earthquake Engineering and Structural Dynamics, 7 (1), 1-22.
442. Takeda, T., Sozen, M.A. and Nielson, N.N. (1970). Reinforced concrete response to simulated earthquake. Journal of Structural Division, ASCE, 96 (ST 12), 2557-2573.
443. Taranath, B.S. (1998). Steel, Concrete and Composite Design of Tall Buildings. McGraw-Hill, New York, NY, USA.
444. Tzanetos, N., Elnashai, A.S., Hamdan, F.H. and Antoniou, S. (2000). Inelastic dynamic response of RC bridges subjected to spatial non-synchronous earthquake motion. Advances in Structural Engineering, 3 (3), 191-214.
445. Vamvatsikos, D. and Cornell, A.C. (2002). Incremental dynamic analysis. Earthquake Engineering and Structural Dynamics, 31 (3), 491-514.
446. Vamvatsikos, D. and Cornell, A.C. (2004). Applied incremental dynamic analysis. Earthquake Spectra, 20 (2), 523-553.
447. Vecchio, F.J. and Collins, M.P. (1982). The response of the reinforced concrete to in-plane shear and normal stresses. Publication No. 82-03, Department of Civil Engineering, University of Toronto, Toronto, Canada.
448. Wen, Y.K., Ellingwood, B.R. and Bracci, J. (2004). Vulnerability function framework for consequence-based engineering. MAE Center Project DS-4 Report, Department of Civil and Environmental Engineering, University of Illinois, Urbana, IL, USA.
449. Williams, M.S. and Sexsmith, R.G. (1995). Seismic damage indices for concrete structures: A state of the art review. Earthquake Spectra, 11 (2), 319-349.
450. Wolf, J.P. (1994). Foundation Vibration Analysis Using Simple Physical Models. Prentice-Hall, Englewood Cliffs, NJ, USA.
451. Wood, W.L. (1990). Practical Time-Stepping Schemes. Clarendon Press, Oxford, UK.
452. Yun, G.J., Ghaboussi, J. and Elnashai, A.S. (2007). Development of neural network based hysteretic models for steel beam-column connections through self-learning simulation. Journal of Earthquake Engineering, 11 (3), 453-467.
453. Zerva, A. (2008). Seismic Ground Motion Spatial Variability: Modeling and Engineering Applications. Advances in Engineering Series. CRC Press, Boca Raton, FL, USA.
454. Zhang, J. and Makris, N. (2002). Seismic response analysis of highway overcrossings including soil-structure interaction. Earthquake Engineering and Structural Dynamics, 31 (11), 1967-1991.
455. Ambrose, J. and Vergun, D. (1999). Design for Earthquakes. John Wiley & Sons, New York, NY, USA.
456. Aoyama, H. (2001). Design of Modern High Rise Reinforced Concrete Structures. Imperial College Press, London, UK.
457. Arnold, C. and Reitherman, R. (1982). Building Configuration and Seismic Design. John Wiley & Sons, New York, NY, USA.
458. Astaneh, A.A. (2001). Seismic behaviour and design of steel shear walls. Structural Tips, Structural Steel Education Council, Technical Information and Product Service, July, Berkeley, CA, USA.
459. Balendra, T. (1993). Vibration of Buildings to Wind and Earthquake Loads. Springer-Verlag, London, UK.
460. Balendra, T., Sam, M.T., Liaw, C.Y. and Lee, S.L. (1991). Preliminary studies into the behaviour of knee braced frames subjected to seismic loading. Engineering Structures, 13 (1), 67-74.
461. Balendra, T., Lim, E.L. and Liaw, C.Y. (1997). Large-scale seismic testing of knee-brace-frame. Journal of Structural Engineering, ASCE, 123 (1), 11-19.
462. Bertero, R.D. and Bertero, V.V. (1999). Redundancy in earthquake-resistant design. Journal of Structural Engineering, ASCE, 125 (1), 81-88.
463. Bozorgnia, Y. and Bertero, V.V. (2004). Earthquake Engineering. From Engineering Seismology to Performance-Based Engineering. CRC Press, Boca Raton, FL, USA.
464. Bruneau, M. and Bhagwagar, T. (2002). Seismic retrofit of flexible steel frames using thin infill panels. Engineering Structures, 24 (4), 443-453.
465. Bruneau, M., Uang, C.M. and Whittaker, A. (1998). Ductile design of steel structures. McGraw-Hill, New York, NY, USA.
466. Comite Euro-Internationale du Beton (CEB) (1996). RC Frames Under Earthquake Loading. State of The Art Report. Thomas Telford, London, UK.
467. Council on Tall Buildings and Urban Habitat (CTBUH) (1995). Structural Systems For Tall Buildings. Tall Buildings and Urban Environment Series. McGraw-Hill, New York, NY, USA.
468. DesRoches, R. and Fenves, G.L. (1997). New design and analysis procedures for intermediate hinges in multiple-frame bridges. Report No. UCB/EERC-97/12, Earthquake Engineering Research Center, University of California, Berkeley, CA, USA.
469. DesRoches, R. and Muthukumar, S. (2002). Effect of pounding and restrainers on seismic response of multi-frame bridges. Journal of Structural Engineering, ASCE, 128 (7), 860-869.
470. Di Sarno, L. (2002). Dynamic Response of Tall Framed Buildings Under Environmental Actions. PhD Thesis, University of Salerno, Salerno, Italy.
471. Dowrick, D.J. (1987). Earthquake Resistant Design for Engineers and Architects. 2nd Edition, John Wiley & Sons, New York, NY, USA.
472. Elnashai, A.S. and Dowling, P.J. (1991). Seismic design of steel structures. In Steel Subjected to Dynamic Loading. Stability and Strength, R. Narayanan and T.M. Roberts, Eds., Elsevier Applied Science, London, England.
473. Eurocode 8 (2004). Design provisions for earthquake resistance of structures. Part 1.3: General rules. Specific rules for various materials and elements. European Communities for Standardisation, Brussels, Belgium.
474. Federal Emergency Management Agency (FEMA) (2004). NEHRP recommended provisions for seismic regulations for new buildings and other structures, Part 2-Commentary. Report No. FEMA 450, Washington, DC, USA.
475. Foliente, G.C. (1997). Earthquake Performance and Safety of Timber Structures. Forest Products Society, Madison, WI, USA.
476. Ghoubhir, M.L. (1984). Earthquake resistance of structural systems for tall buildings. Proceedings of the 8th World Conference on Earthquake Engineering, Vol. V, San Francisco, CA, USA, pp. 491-498.
477. Gupta, A. and Krawinkler, H. (2000). Estimation of seismic drift demands for frame structures. Earthquake Engineering and Structural Dynamics, 29 (9), 1287-1305.
478. Hassan, O.F. and Goel, S.C. (1991). Modeling of bracing members and seismic behaviour of concentric braced steel structures. Report No. UMCE 91-1, Department of Civil Engineering, University of Michigan, Ann Arbor, MI, USA.
479. Hjelmstadt, K.D. and Popov, E.P. (1984). Characteristics of eccentrically braced frames. Journal of Structural Engineering, ASCE, 110 (2), 340-353.
480. Hoenderkamp, J.C.D. and Snijder, H.H. (2003). Preliminary analysis of high-rise braced frames with fa ç ade riggers. Journal of Structural Engineering, ASCE, 129 (5), 640-647.
481. Inoue, K. Sawaizumi, S. and Higashibata, Y. (2001). Stiffening requirements for unbounded braces encased in concrete panels. Journal of Structural Engineering, ASCE, 127 (6), 712-719.
482. Kasai, K. and Popov, E.P. (1986). A study on the seismically resistant eccentrically steel frames. Earthquake Engineering Research Center, Report No. UCB/EERC-86/01, University of California, Berkeley, CA, USA.
483. Kasai, K., Jagiasi, A.R. and Jeng, V. (1996). Inelastic vibration phase theory for seismic pounding mitigation. Journal of Structural Engineering, ASCE, 112 (10), 1136-1146.
484. Khatib, I., Mahin, S.A. and Pister, K.S. (1988). Seismic behavior of concentrically braced steel frames. Earthquake Engineering Research Center, Report No. UCB/EERC-8-01, Berkeley, CA, USA.
485. Kim, S.H., Lee, S.W., Won, J.H. and Mha, H.S. (2000). Dynamic behaviours of bridges under seismic excitations with pounding between adjacent girders. Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand, Paper N.1815.
486. Laogan, B.T. and Elnashai, A.S. (1999). Structural performance and economics of tall high strength RC buildings in seismic regions. The Structural Design of Tall Buildings, 8 (3), 171-204.
487. Nowak, A.S. and Collins, K.R. (2000). Reliability of Structures. McGraw-Hill Higher Education, New York, USA.
488. Paulay, T. and Priestley, M.N.J. (1992). Seismic Design of Reinforced Concrete and Masonry Buildings. John Wiley & Sons, New York, NY, USA.
489. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996). Seismic Design and Retrofit of Bridges. John Wiley & Sons, New York, NY, USA.
490. Qi, X., Chang, K.L. and Tsai, K.C. (1997). Seismic design of eccentrically braced space frames. Journal of Structural Engineering, ASCE, 123 (8), 977-985.
491. Sam, M.T., Balendra, T. and Liaw, C.Y. (1995). Earthquake resistant steel frames with energy dissipating knee. Engineering Structures, 17 (5), 334-343.
492. Stafford-Smith, B. and Salim, I. (1981). Parameter study of outrigger-braced tall building structures. Journal of Structural Engineering, ASCE, 107 (10), 2001-2014.
493. Taranath, B.S. (1998). Steel, Concrete and Composite Design of Tall Buildings. McGraw-Hill, New York, NY, USA.
494. Wakabayashi, M. (1986). Design of Earthquake-Resistant Buildings. McGraw-Hill, New York, NY, USA.
495. Wen, Y.K. and Song, S.H. (2003). Structural reliability/redundancy under earthquakes. Journal of Structural Engineering, ASCE, 129 (1), 56-67.
496. Yang, C.S., Leon, R.T. and DesRoches, R. (2006). On the development of zipper frames by pushover testing. Proceedings of the 5th International Conference on the Behaviour of Steel Structures in Seismic Areas, Yokohama, Japan, pp. 555-561.
497. Ambraseys, N.N., Elnashai, A.S., Bommer, J.J., Haddar, F., Madas, P., Elghazouli, A.Y. and Vogt, J. (1990). The Chenoua (Algeria) Earthquake of 29 October 1989, Engineering Seismology and Earthquake Engineering, Report No. ESEE/90-4, Imperial College, London, UK.
498. Ambraseys, N.N., Elnashai, A.S., Broderick, B.M., Salama, A.I and Soliman, M.M. (1992). The Erzincan (Turkey) Earthquake of 13 March 1992, Engineering Seismology and Earthquake Engineering, Report No. ESEE/92-11, Imperial College, London, UK.
499. Aoyama, H. (2001). Design of Modern Highrise Reinforced Concrete Structures. Series on Innovation in Structures and Construction, Vol. 3, A.S. Elnashai and P.J. Dowling, Eds., Imperial College Press, London, UK.
500. Astaneh-Asl, A., Bertero, V.V., Bolt, B., Mahin, S.A., Moehle, J.P. and Seed, R.B. (1989). Preliminary report on the seismological and engineering aspects of the October 17, 1989 Santa Cruz (Loma Prieta) earthquake. Earthquake Engineering Research Centre, University of Berkeley, Report No. UCB/EERC-89/14, Berkeley, CA, USA.
501. Bertero, V.V. (1996). Implications of observed pounding of buildings on seismic code regulations. Proceedings of the 11th World Conference on Earthquake Engineering, Disc N.4, Paper N.2102, CD-ROM.
502. Braga, F., Briseghella, L. and Pinto, P.E. (1977). The Friuli (Italy) May and September 1976 earthquake: A brief survey of the damage. Proceedings of the 6th World Conference on Earthquake Engineering, Sarita Prakashan, Meerut, India, Vol. I, pp. 289-294.
503. Broderick, B.M., Elnashai, A.S., Ambraseys, N.N., Barr, J.M., Goodfellow, R.G. and Higazy, E.M. (1994). The Northridge (California) Earthquake of 17 January 1994: Observations, Strong Motion and Correlative Response Analysis. Engineering Seismology and Earthquake Engineering, Research Report No. ESEE 94/4, Imperial College, London, UK.
504. Bruneau, M. (1998). Performance of steel bridges during the 1995 Hyogoken-Nanbu (Kobe, Japan) earthquake-A North American perspective. Engineering Structures, 20 (12), 1063-1078.
505. Earthquake Engineering Research Institute (EERI) (1994). Northridge Earthquake January 17, 1994. Preliminary Reconnaissance Report. J.F. Hall, Ed., EERI, CA, USA.
506. Elnashai, A.S. (1998). Observations on the Effects of the Adana-Ceyhan (Turkey) Earthquake of 27 June 1998. Engineering Seismology and Earthquake Engineering, Report No. ESEE/98-5, Imperial College, London, UK.
507. Elnashai, A.S. (1999). The Kocaeli (Turkey) Earthquake of 17 August 1999: Assessment of Spectra and Structural Response Analysis . Engineering Seismology and Earthquake Engineering, Report No. ESEE/99-3, Imperial College, London, UK.
508. Elnashai, A.S., Bommer, J.J. and Elghazouli, A.Y. (1989). The Loma Prieta (Santa Cruz, California) Earthquake of 17 October 1989. Engineering Seismology and Earthquake Engineering, Report No. ESEE/98-9, Imperial College, London, UK.
509. Elnashai, A.S., Bommer, J.J., Baron, I., Salama, A.I. and Lee, D. (1995). Selected Engineering Seismology and Structural Engineering Studies of the Hyogo-ken Nanbu (Kobe, Japan) Earthquake of 17 January 1995. Engineering Seismology and Earthquake Engineering, Report No. ESEE/95-2, Imperial College, London, UK.
510. Federal Emergency Management Agency (FEMA) (2000). State of the art report on past performance of steel moment frame buildings in earthquakes. Report No. FEMA 355E, Washington, DC, USA.
511. Goltz, J.D. (1994). The Northridge, California Earthquake of January 17, 1994: General Reconnaissance Report. National Centre for Earthquake Engineering Research, Report No. NCEER-94-0005, Buffalo, NY, USA.
512. Kawashima, K. (1995). Seismic design for construction and repair of highway bridges that suffered damage by the Hanshin Awaji great earthquake. In Building for the 21st Century, Y.C. Loo, Ed., EASEC-5, Gold Coast, Australia.
513. Matos, C.G. and Dodds, R.H. (2002). Probabilistic modelling of weld fracture in steel frame connections. Part II: Seismic loadings. Engineering Structures, 24 (6), 687-705.
514. Miller, D.K. (1998). Lessons learned from the Northridge earthquake. Engineering Structures, 20 (4-6), 249-260.
515. Naeim, F. (2001). The Seismic Design Handbook. 2nd Edition, Kluwer Academic Publisher, New York, NY, USA.
516. Naeim, F., Lew, M., Huang, C.H., Lam, H.K. and Carpenter, L.D. (2000). The performance of tall buildings during the 21 September 1999 Chi-Chi earthquake Taiwan. The Structural Design of Tall Buildings, 9 (2), 137-160.
517. Nakashima, M., Inoue, K. and Tada, M. (1998). Classification of damage to steel buildings observed in the 1995 Hyogoken-Nanbu earthquake. Engineering Structures, 20 (4-6), 271-281.
518. Nateghi, F.A. (1995). Retrofitting of earthquake damaged steel buildings. Engineering Structures, 17 (10), 749-755.
519. Nateghi, F.A. (1997). Seismic upgrade design of a low-rise steel buildings. Engineering Structures, 19 (11), 954-963.
520. National Information Service for Earthquake Engineering (NISEE) (2000). Image Database. http://www.nisee.org.
521. Penelis, G.G. and Kappos, A.J. (1997). Earthquake Resistant Concrete Structures. E & FN SPON-Chapman & Hall, London, UK.
522. Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996). Seismic Design and Retrofit of Bridges. John Wiley & Sons, New York, NY, USA.
523. Roeder, C.W. (2002). Connection performance for seismic design of steel moment frames. Journal of Structural Engineering, ASCE, 128 (4), 517-525.
524. Rosenblueth, E., Ruiz, S.E. and Thiel, C.C. (1989). The Michoacan Earthquake: Collected Papers Published in Earthquake Spectra, Volumes 4 and 5, 1988 and 1989. Earthquake Engineering Research Institute, El Cerrito, CA, USA.
525. Saeki, S., Kurihara, T., Toriumi, R. and Nishjtani, M. (1997). Effect of the Hyogoken-Nanbu earthquake on the Akashi Kaikyo bridge. Proceedings of the 2nd Italy-Japan Workshop on Seismic Design and Retrofit of bridges, 27-28 February, Rome, Italy.
526. Watanabe, E., Sugiura, K., Nagata, K. and Kitane, Y. (1998). Performances and damages to steel structures during 1995 Hyogoken-Nanbu earthquake. Engineering Structures, 20 (4-6), 282-290.
527. Yasuda, T., Moritani, T., Fukunaga, S. and Kawabata, A. (2000). Seismic behavior and simulation analysis of Honshu-Shikoku bridges. Journal of Structural Engineering, JSCE, 46 A, 685-694.
528. Youssef, N.F.G., Bonowitz, D. and Gross, J.L. (1995). A survey of steel moment-resisting frame buildings affected by the 1994 Northridge earthquake. Report No. NISTR 56254, National Institute for Science and Technology, Gaithersburg, MD, USA.