Lost mold rapid infiltration forming of mesoscale ceramics: Part 1, fabrication

Journal of the American Ceramic Society

Volumn 92, Issue SUPPL. 1, 2009, Pages

  Antolino, Nicholas E ^a   Hayes, Gregory ^a   Kirkpatrick, Rebecca ^a   Muhlstein, Christopher L ^a   Frecker, Mary I ^b   Mockensturm, Eric M ^b   Adair, James H ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b The Pennsylvania State University

Author keywords

[No Author keywords available]

Indexed keywords

ATTRITION MILLINGS; BEND STRENGTHS; CERAMIC SUBSTRATES; CERAMIC SUSPENSIONS; CONCENTRATED SUSPENSIONS; ENGINEERING SOLUTIONS; FIRST GENERATIONS; MESOSCALE; MOLD FABRICATIONS; NANOSCALE; PHOTORESIST MOLDS; POINT BENDS; POWDER PROCESSING; RAPID INFILTRATIONS; REFRACTORY CERAMICS; SINGLE GRAINS; SINTERED MICROSTRUCTURES; THERMAL PROCESSES; TRAPEZOIDAL CROSS SECTIONS;

ASPECT RATIO; CERAMIC MATERIALS; COLLOID CHEMISTRY; COLLOIDS; FABRICATION; INFILTRATION; MOLDS; PHOTORESISTORS; POWDERS; SEEPAGE; SINTERING; SOIL MECHANICS; SURFACE TREATMENT; SUSPENSIONS (COMPONENTS); SUSPENSIONS (FLUIDS); ZIRCONIA;

SUBSTRATES;

EID: 58149333664     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2008.02627.x     Document Type: Conference Paper

References (46)

1. Christian P. J. A. Kenis Fabrication of Ceramic Microscale Structures J. Am. Ceram. Soc., 90 [9] 2779 83 (2007).
2. Z. Zhang, B. Liu F. F. Lange Increasing Wet Green Strength of Alumina Body During Microfabrication by Colloidal Isopressing J. Am. Ceram. Soc., 88 [6] 1411 4 (2005).
3. M. Heule L. J. Gauckler Gas Sensors Fabricated from Ceramic Suspensions by Micromolding in Capillaries Adv. Mater., 13 [23] 1790 3 (2001).
4. R. Maeda, J. J. Tsaur, S. H. Lee M. Ichiki Piezoelectric Microactuator Devices J. Electroceram., 12 [1-2] 89 100 (2004).
5. I. C. Clarke, M. Manaka, D. D. Green, P. Williams, G. Pezzotti, Y. H. Kim, M. Ries, N. Sugano, L. Sedel, C. Delauney, B. Ben Nissan, T. Donaldson G. A. Gustafson Current Status of Zirconia Used in Total Hip Implants J. Bone Jt. Surg. Am., 85A, 73 84 (2003).
6. F. F. Lange, B. I. Davis E. Wright Processing-Related Fracture Origins: 4. Elimination of Voids Produced by Organic Inclusions J. Am. Ceram. Soc., 69 [1] 66 9 (1986).
7. M. I. Frecker, R. P. Dziedzic R. S. Haluck Design of Multifunctional Compliant Mechanisms for Minimally Invasive Surgery Minim. Invasive Ther. Allied Technol., 11 [5-6] 311 9 (2002).
8. M. E. Aguirre, G. Hayes, M. Frecker, J. Adair N. Antolino Fabrication and Design of a Nanoparticulate Enabled Micro Forceps Proceedings of the IDETC/CIE, New York, NY, 2008.
9. J. A. Lewis, J. E. Smay, J. Stuecker J. Cesarano Direct Ink Writing of Three-Dimensional Ceramic Structures J. Am. Ceram. Soc., 89 [12] 3599 609 (2006).
10. B. Y. Tay, J. R. G. Evans M. J. Edirisinghe Solid Freeform Fabrication of Ceramics Int. Mater. Rev., 48 [6] 341 70 (2003).
11. M. Heule, S. Vuillemin L. J. Gauckler Powder-Based Ceramic Meso- and Microscale Fabrication Processes Adv. Mater., 15 [15] 1237 45 (2003).
12. Y. N. Xia G. M. Whitesides Soft Lithography Annu. Rev. Mater. Sci., 28, 153 84 (1998).
13. M. Heule, U. P. Schonholzer L. J. Gauckler Patterning Colloidal Suspensions by Selective Wetting of Microcontact-Printed Surfaces J. Eur. Ceram. Soc., 24 [9] 2733 9 (2004).
14. X. M. Zhao, Y. N. Xia G. M. Whitesides Fabrication of Three-Dimensional Micro-Structures: Microtransfer Molding Adv. Mater., 8 [10] 837 40 (1996).
15. R. A. Lawes Manufacturing Costs for Microsystems/MEMS Using High Aspect Ratio Microfabrication Techniques Microsyst. Technol., 13 [1] 85 95 (2007).
16. M. Heule L. J. Gauckler Microfabrication of Ceramics Based on Colloidal Suspensions and Photoresist Masks J. Photopolym. Sci. Technol., 14 [3] 449 52 (2001).
17. A. M. Morales, R. Pitchumani, T. J. Garino, A. K. Gutmann L. A. Domeier Fabrication of Ceramic Microstructures via Microcasting of Nanoparticulate Slurry J. Am. Ceram. Soc., 88 [3] 570 8 (2005).
18. T. J. Garino, A. M. Morales B. L. Boyce The Mechanical Properties, Dimensional Tolerance and Microstructural Characterization of Micro-Molded Ceramic and Metal Components Microsyst. Technol., 10 [6-7] 506 9 (2004).
19. M. Despont, H. Lorenz, N. Fahrni, J. Brugger, P. Renaud P. Vettiger High-Aspect-Ratio, Ultrathick, Negative-Tone Near-UV Photoresist for MEMS Applications pp. 518 22 in Proceedings of the Micro Electro Mechanical Systems. IEEE, Nagoya, Japan, 1997.
20. B. Eyre, J. Blosiu D. Wiberg Taguchi Optimization for the Processing of Epon SU-8 Resist pp. 218 22 in Proceedings of the Micro Electro Mechanical. IEEE, Heidelberg, Germany, 1998.
21. B. Su, D. Zhang T. W. Button Micropatterning of Fine Scale Ceramic Structures J. Mater. Sci., 37 [15] 3123 6 (2002).
22. G. Hong, A. S. Holmes M. E. Heaton SU8 Resist Plasma Etching and Its Optimisation Microsyst. Technol., 10 [5] 357 9 (2004).
23. U. P. Schonholzer, R. Hummel L. J. Gauckler Microfabrication of Ceramics by Filling of Photoresist Molds Adv. Mater., 12 [17] 1261 3 (2000).
24. T. Tsukada, S. Venigalla, A. A. Morrone J. H. Adair Low-Temperature Hydrothermal Synthesis of Yttrium-Doped Zirconia Powders J. Am. Ceram. Soc., 82 [5] 1169 74 (1999).
25. M. A. Janney, O. O. Omatete, C. A. Walls, S. D. Nunn, R. J. Ogle G. Westmoreland Development of Low-Toxicity Gelcasting Systems J. Am. Ceram. Soc., 81 [3] 581 91 (1998).
26. J. T. Ma, Z. P. Xie, H. Z. Miao, L. J. Zhou, Y. Huang Y. B. Cheng Elimination of Surface Spallation of Alumina Green Bodies Prepared by Acrylamide-Based Gelcasting via Poly(vinylpyrrolidone) J. Am. Ceram. Soc., 86 [2] 266 72 (2003).
27. G. Hayes, N. Antolino, M. Frecker, C. Muhlstein, E. Mockensturm J. H. Adair Processing of Sub-500 Micron Scale Ceramic Parts for Surgical Applications Proceedings of the Materials Science & Technology Conference, Cincinnati, OH, 2006.
28. ASTM International. ASTM C 1161-02c. Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature. ASTM International, West Conshohocken, PA, 2002.
29. T. Namazu, Y. Isono T. Tanaka Evaluation of Size Effect on Mechanical Properties of Single Crystal Silicon by Nanoscale Bending Test using AFM J. Microelectromech. Syst., 9 [4] 450 9 (2000).
30. W. C. Young R. G. Budynas, Roark's Formulas for Stress and Strain, 7th edition, McGraw-Hill, New York 2002).
31. R. M. German A Measure of the Number of Particles in Agglomerates Int. J. Powder Metall., 32 [4] 365 73 (1996).
32. T. Allen, Particle Size Measurement: Powder Sampling and Particle Size Measurement, Vol. 1, 5th edition, Chapman & Hall, London 1997).
33. F. F. Lange Sinterability of Agglomerated Powders J. Am. Ceram. Soc., 67 [2] 83 9 (1984).
34. J. H. Adair, T. R. Shrout, G. L. Messing, M. M. Mandanas T. M. Pecora Dynamic Control and Enhanced Chemical Milling of Ceramics to Submicron Particle Sizes U.S. Patent no 6,415,996, 2002.
35. M. C. Kerr J. S. Reed Comparative Grinding Kinetics and Grinding Energy During Ball Milling and Attrition Milling Am. Ceram. Soc. Bull., 71 [12] 1809 16 (1992).
36. J. H. Adair Colloidal Lessons Learned for Dispersion of Nanosize Particulate Suspensions p. 244 in Proceedings of the FORUM 2004 of the World Academy of Ceramics. Edited by J. F. Baumard. Faenza/Cesenatico, Italy, 2005.
37. S. Ding, P. H. Lu, R. R. Dammel, J. Shan, S. Mehtsun T. T. Hannigan Novel Polymeric Dyes for Bottom Antireflective Coatings SPIE Proc. Ser., 3049 [1028] 765 74 (1988).
38. J. H. Adair R. V. Linhart A Generalized Program to Calculate Interparticle Interactions in a Variety of Suspension Conditions pp. 69 84 in Handbook on Characterization Techiques in a Variety of Suspension Conditions, Edited by J. H. Adair, J. A. Casey S. Venigalla. American Ceramic Society, Westerville, OH, 1993.
39. S. Biggs T. W. Healy Electrosteric Stabilization of Colloidal Zirconia with Low-Molecular-Weight Polyacrylic-Acid J. Chem. Soc. - Faraday Trans., 90 [22] 3415 21 (1994).
40. 2-Polymer Solution Interface Powder Technol., 141 [1-2] 12 9 (2004).
41. L. Bergstrom Hamaker Constants of Inorganic Materials Adv. Colloid Interface Sci., 70, 125 69 (1997).
42. J. A. Lewis Colloidal Processing of Ceramics J. Am. Ceram. Soc., 83 [10] 2341 59 (2000).
43. L. Bergstrom, E. Blomberg H. Guldberg-Pedersen Interparticle Forces and Rheological Properties of Ceramic Suspensions pp. 119 26 in Proceedings of the Novel Synthesis and Processing of Ceramics. Edited by H. Suzuki, K. Komeya, K. Vematsu Zurith. Clausthal Zellerfe, Switzerland, 1999.
44. R. Feng R. J. Farris Influence of Processing Conditions on the Thermal and Mechanical Properties of SU8 Negative Photoresist Coatings J. Micromech. Microeng., 13 [1] 80 8 (2003).
45. B. Li, M. Liu Q. F. Chen Low-Stress Ultra-Thick SU-8 UV Photolithography Process for MEMS J. Microlithogr. Microfabr. Microsyst., 4 [4] 043008-1 6 (2005).
46. M. J. Readey C. L. McCallen Microstructure, Flaw Tolerance, and Reliability of Ce-TZP and Y-TZP Ceramics J. Am. Ceram. Soc., 78 [10] 2769 76 (1995).