SCOPUS 정보 검색 플랫폼

International Materials Reviews

Volumn 48, Issue 6, 2003, Pages 341-370

Solid freeform fabrication of ceramics

(3) Tay, B Y a,b Evans, J R G a Edirisinghe, M J a

a QUEEN MARY UNIVERSITY OF LONDON (United Kingdom)

b SINGAPORE INSTITUTE OF MANUFACTURING TECHNOLOGY (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

MULTIFUNCTIONAL MATERIALS; SOLID FREEFORMING; TAXONOMY;

BIOMIMETIC MATERIALS; COMPUTER AIDED DESIGN; COMPUTER CONTROL; COMPUTERIZED TOMOGRAPHY; INFORMATION TECHNOLOGY; MICROSTRUCTURE; MULTILAYERS; PERSONAL COMPUTERS; RAPID PROTOTYPING;

CERAMIC MATERIALS;

EID: 0345801401 PISSN: 09506608 EISSN: None Source Type: Journal
DOI: 10.1179/095066003225010263 Document Type: Review

Times cited : (150)

References (307)

1
- 0004311137
- Boston, Allyn and Bacon
- R. A. LINDBERG: 'Processes and materials of manufacture', 4th edn, 18-20; 1990, Boston, Allyn and Bacon.
- (1990) 'Processes and Materials of Manufacture', 4th Edn , pp. 18-20
- Lindberg, R.A.¹

2
- 0004203698
- New York, Wiley
- B. H. AMSTEAD, P. F. OSTWALD and M. L. BEOEMAN: 'Manufacturing processes', 8th edn; 1969, New York, Wiley.
- (1969) 'Manufacturing Processes', 8th Edn
- Amstead, B.H.¹ Ostwald, P.F.² Beoeman, M.L.³

3
- 0008130435
- London, Macmillan
- G. MAIR: 'Mastering manufacturing'; 1993, London, Macmillan.
- (1993) Mastering Manufacturing
- Mair, G.¹

4
- 0004149007
- Chichester, Ellis Harwood
- A. GHOSH and A. K. MALIK: 'Manufacturing science'; 1986, Chichester, Ellis Harwood.
- (1986) Manufacturing Science
- Ghosh, A.¹ Malik, A.K.²

5
- 0004181403
- New York, McGraw-Hill
- J. A. SCHEY: 'Introduction to manufacturing processes', 2-3; 1997, New York, McGraw-Hill.
- (1997) Introduction to Manufacturing Processes , pp. 2-3
- Schey, J.A.¹

6
- 0003598723
- New York, Addison Wesley
- S. KALPAKJIAN: 'Manufacturing processes for engineering materials', 2nd edn, 6-7; 1991, New York, Addison Wesley.
- (1991) 'Manufacturing Processes for Engineering Materials', 2nd Edn , pp. 6-7
- Kalpakjian, S.¹

7
- 0345801991
- Cambridge, Cambridge University Press
- J. BOURRIAU: 'Pottery from the Nile valley before the Arab conquest', 15-18; 1981, Cambridge, Cambridge University Press.
- (1981) Pottery from the Nile Valley before the Arab Conquest , pp. 15-18
- Bourriau, J.¹

8
- 0031546297
- J. BALLATO, R. VAN WEEREN, M. AGARWALA, R. E. RIMAN and S. C. DANFORTH: Electron. Lett., 1997, 33, 83-84.
- (1997) Electron. Lett. , vol.33 , pp. 83-84
- Ballato, J.¹ Van Weeren, R.² Agarwala, M.³ Riman, R.E.⁴ Danforth, S.C.⁵

9
- 0347459403
- Chicago, Encyclopaedia Britannica Inc.
- 'The new encyclopaedia Britannica', 15th edn, Vol. 7, 313; 1995, Chicago, Encyclopaedia Britannica Inc.
- (1995) 'The New Encyclopaedia Britannica', 15th Edn , vol.7 , pp. 313

10
- 0347459404
- Chicago, Encyclopaedia Britannica Inc.
- 'The new encyclopaedia Britannica', 15th edn, Vol. 9, 347; 1995, Chicago, Encyclopaedia Britannica Inc.
- (1995) 'The New Encyclopaedia Britannica', 15th Edn , vol.9 , pp. 347

11
- 0013585249
- ed. R. W. Cahn et al., Weinheim, VCH
- P. CALVERT: 'Materials science and technology', (ed. R. W. Cahn et al.), Vol. 17, 51-82; 1996, Weinheim, VCH.
- (1996) Materials Science and Technology , vol.17 , pp. 51-82
- Calvert, P.¹

12
- 0026391429
- J. P. KRUTH: CIRP Ann., 1991, 40, 603-614.
- (1991) CIRP Ann. , vol.40 , pp. 603-614
- Kruth, J.P.¹

13
- 0031270024
- J. G. CONLEY and H. L. MARCUS: J. Manuf. Sci. Eng. (Trans. ASME), 1997, 119, 811-816.
- (1997) J. Manuf. Sci. Eng. (Trans. ASME) , vol.119 , pp. 811-816
- Conley, J.G.¹ Marcus, H.L.²

14
- 0032188397
- D. T. PHAM and R. S. GAULT: Int. J. Mach. Tools Manuf., 1998, 38, 1257-1287.
- (1998) Int. J. Mach. Tools Manuf. , vol.38 , pp. 1257-1287
- Pham, D.T.¹ Gault, R.S.²

15
- 0003606655
- New York, McGraw-Hill
- P. F. JACOBS: 'Rapid prototyping and manufacturing: fundamentals of stereolithography'; 1993, New York, McGraw-Hill.
- (1993) Rapid Prototyping and Manufacturing: Fundamentals of Stereolithography
- Jacobs, P.F.¹

16
- 0348089419
- J. G. ZHOU: Mater. Des., 2000, 21, 61-63.
- (2000) Mater. Des. , vol.21 , pp. 61-63
- Zhou, J.G.¹

17
- 0003549879
- Dordrecht, Kluwer Academic
- J. J. SEAMAN, J. W. BARLOW, D. L. BOURELL, R. H. CRAWFORD, H. L. MARCUS and K. P. MCALEA: 'Solid freeform fabrication: a new direction in manufacturing', 1-49 and 121-165; 1997, Dordrecht, Kluwer Academic.
- (1997) Solid Freeform Fabrication: A New Direction in Manufacturing , pp. 1-49
- Seaman, J.J.¹ Barlow, J.W.² Bourell, D.L.³ Crawford, R.H.⁴ Marcus, H.L.⁵ McAlea, K.P.⁶

18
- 0001265052
- C. GRIFFIN, J. DANFENBACH and S. MCMILLIN: Bull. Am. Ceram. Soc., 1994, 73, 109-113.
- (1994) Bull. Am. Ceram. Soc. , vol.73 , pp. 109-113
- Griffin, C.¹ Danfenbach, J.² McMillin, S.³

19
- 0024090540
- D. HAUBER: Int. Powder Metall., 1988, 24, 337-342.
- (1988) Int. Powder Metall. , vol.24 , pp. 337-342
- Hauber, D.¹

20
- 0026909122
- D. KOCHAN: Comput. Ind., 1992, 20, 133-140.
- (1992) Comput. Ind. , vol.20 , pp. 133-140
- Kochan, D.¹

21
- 0036685719
- W. BAUER and R. KNITTER: J. Mater. Sci., 2002, 37, 3127-3140.
- (2002) J. Mater. Sci. , vol.37 , pp. 3127-3140
- Bauer, W.¹ Knitter, R.²

22
- 84967531123
- New York, Wiley
- C. K. CHUA: 'Rapid prototyping; principles and applications in manufacturing'; 1997, New York, Wiley.
- (1997) Rapid Prototyping; Principles and Applications in Manufacturing
- Chua, C.K.¹

23
- 0030402839
- New York, ASME
- H. L. MARCUS, S. HARRISON and J. CROCKER: Proc. Int. Symp. on 'Information storage and processing systems', Vol. 4, 3-9; 1996, New York, ASME.
- (1996) Proc. Int. Symp. on 'Information Storage and Processing Systems' , vol.4 , pp. 3-9
- Marcus, H.L.¹ Harrison, S.² Crocker, J.³

24
- 0346198090
- I. SHISHKOVSKY: Rapid Prototyp. J., 2001, 7, 138-147 and 207-211.
- (2001) Rapid Prototyp. J. , vol.7 , pp. 138-147
- Shishkovsky, I.¹

25
- 0033280683
- J. W. HALLORAN: Br. Ceram. Trans., 1999, 98, 299-303.
- (1999) Br. Ceram. Trans. , vol.98 , pp. 299-303
- Halloran, J.W.¹

26
- 0027744787
- New York, ASME
- S. AU and P. K. WRIGHT: 'Intelligent concurrent designs: fundamentals, methodology, modelling and practice', Vol. 66, 73-82; 1993, New York, ASME.
- (1993) Intelligent Concurrent Designs: Fundamentals, Methodology, Modelling and Practice , vol.66 , pp. 73-82
- Au, S.¹ Wright, P.K.²

27
- 0028464801
- L. TRYGG: Int. J. Human Factors Manuf., 1994, 4, 321-338.
- (1994) Int. J. Human Factors Manuf. , vol.4 , pp. 321-338
- Trygg, L.¹

28
- 0037604134
- G. M. A. COX: Foundryman, 1996, 89, 331-337.
- (1996) Foundryman , vol.89 , pp. 331-337
- Cox, G.M.A.¹

29
- 0029236660
- P. M. DICKENS: Proc. Inst. Mech. Eng., 1995, 209, 261-266.
- (1995) Proc. Inst. Mech. Eng. , vol.209 , pp. 261-266
- Dickens, P.M.¹

30
- 0031655056
- C. K. CHUA, S. M. CHOU and T. S. WONG: Int. J. Adv. Manuf. Technol., 1998, 14, 146-152.
- (1998) Int. J. Adv. Manuf. Technol. , vol.14 , pp. 146-152
- Chua, C.K.¹ Chou, S.M.² Wong, T.S.³

31
- 0035274897
- J. W. SEARS: Int. J. Powder Metall., 2001, 37, 29-30.
- (2001) Int. J. Powder Metall. , vol.37 , pp. 29-30
- Sears, J.W.¹

32
- 0032181971
- G. WANG and V. D. KRSTIC: J. Can. Ceram. Soc., 1998, 67, 52-57.
- (1998) J. Can. Ceram. Soc. , vol.67 , pp. 52-57
- Wang, G.¹ Krstic, V.D.²

33
- 0348089418
- R. IRVING: Int. J. Powder Metall., 2000, 7, 32-41.
- (2000) Int. J. Powder Metall. , vol.7 , pp. 32-41
- Irving, R.¹

34
- 0022249680
- J. HEINZL and C. H. HERTZ: Electron. Electron Phys., 1985, 65, 91-171.
- (1985) Electron. Electron Phys. , vol.65 , pp. 91-171
- Heinzl, J.¹ Hertz, C.H.²

35
- 0348089417
- N. P. FUSTER: Assem. Autom., 1997, 17, 525-540.
- (1997) Assem. Autom. , vol.17 , pp. 525-540
- Fuster, N.P.¹

36
- 0346828661
- Orlando, FA, New York, American Society of Mechanical Engineers
- J. D. CAWLEY: Proc. Int. Gas Turbine and Aeroengine Congress and Exhibition, Orlando, FA, 1-6; 1997, New York, American Society of Mechanical Engineers.
- (1997) Proc. Int. Gas Turbine and Aeroengine Congress and Exhibition , pp. 1-6
- Cawley, J.D.¹

37
- 0030259832
- M. L. GRIFFITH and J. W. HALLORAN: J. Am. Ceram. Soc., 1996, 79, 2601-2608.
- (1996) J. Am. Ceram. Soc. , vol.79 , pp. 2601-2608
- Griffith, M.L.¹ Halloran, J.W.²

38
- 0346828662
- Austin, TX, University of Texas at Austin
- M. K. AGARWALA, A. BANDYOPADHYAY, R. VAN WEEREN, N. A. LANGRANA, A. SAFARI, S. C. DANFORTH, V. R. JAMALABAD, P. J. WHALEN, R. DONALDSON and J. POLLINGER: Proc. Symp on 'Solid freeform fabrication', 326-334; 1996, Austin, TX, University of Texas at Austin.
- (1996) Proc. Symp on 'Solid Freeform Fabrication' , pp. 326-334
- Agarwala, M.K.¹ Bandyopadhyay, A.² Van Weeren, R.³ Langrana, N.A.⁴ Safari, A.⁵ Danforth, S.C.⁶ Jamalabad, V.R.⁷ Whalen, P.J.⁸ Donaldson, R.⁹ Pollinger, J.¹⁰

39
- 0029233912
- P. K. SUBRAMANIAN and H. L. MARCUS: Mater. Manuf. Process., 1995, 10, 689-706.
- (1995) Mater. Manuf. Process. , vol.10 , pp. 689-706
- Subramanian, P.K.¹ Marcus, H.L.²

40
- 0030190462
- E. A. GRIFFIN, D. R. MUMM and D. B. MARSHALL: Am. Ceram. Soc. Bull., 1996, 75, 65-68.
- (1996) Am. Ceram. Soc. Bull. , vol.75 , pp. 65-68
- Griffin, E.A.¹ Mumm, D.R.² Marshall, D.B.³

41
- 0030151882
- J. D. CAWLEY, A. H. HEUER, W. S. NEWMAN and B. B. MATHEWSON: Am. Ceram. Soc. Bull., 1996, 75, 75-79.
- (1996) Am. Ceram. Soc. Bull. , vol.75 , pp. 75-79
- Cawley, J.D.¹ Heuer, A.H.² Newman, W.S.³ Mathewson, B.B.⁴

42
- 3543100031
- ed. H. L. Marcus et al., Austin, TX, University of Texas at Austin
- M. J. CIMA, J. YOO, S. KHANUJA, M. RHYNERSON and D. NAMMOUR: Proc. Symp. on 'Solid freeform fabrication', (ed. H. L. Marcus et al.), 479-488; 1995, Austin, TX, University of Texas at Austin.
- (1995) Proc. Symp. on 'Solid Freeform Fabrication' , pp. 479-488
- Cima, M.J.¹ Yoo, J.² Khanuja, S.³ Rhynerson, M.⁴ Nammour, D.⁵

43
- 0011449541
- ed. T. S. Srivatsan and K. A. Khor, Warrendale, PA, TMS
- M. J. EDIRISINGHE: Proc. 1998 TMS Fall Meeting, (ed. T. S. Srivatsan and K. A. Khor), 139-150; 1998, Warrendale, PA, TMS.
- (1998) Proc. 1998 TMS Fall Meeting , pp. 139-150
- Edirisinghe, M.J.¹

44
- 0028523309
- O. LEHMANN and M. STUKE: Mater. Lett., 1994, 21, 131-136.
- (1994) Mater. Lett. , vol.21 , pp. 131-136
- Lehmann, O.¹ Stuke, M.²

45
- 0004029265
- Dordrecht, Kluwer Academic
- R. H. LEACH, R. J. PIERCE, E. P. HICKMAN, M. J. MACKENZIE and H. G. SMITH: 'The printing ink manual', 5th edn, 14-85; 1999, Dordrecht, Kluwer Academic.
- (1999) 'The Printing Ink Manual', 5th Edn , pp. 14-85
- Leach, R.H.¹ Pierce, R.J.² Hickman, E.P.³ Mackenzie, M.J.⁴ Smith, H.G.⁵

46
- 0036132358
- N. S. LEYLAND, J. R. A. EVANS and D. J. HARRISON: J. Euro. Ceram. Soc., 2002, 22, 1-13.
- (2002) J. Euro. Ceram. Soc. , vol.22 , pp. 1-13
- Leyland, N.S.¹ Evans, J.R.A.² Harrison, D.J.³

47
- 0008153690
- J. VECHEMBRE, L. SAGALOWICZ and N. SETTER: Ferroelectrics, 1999, 224, 573-580.
- (1999) Ferroelectrics , vol.224 , pp. 573-580
- Vechembre, J.¹ Sagalowicz, L.² Setter, N.³

48
- 0004797737
- A. KAWAHARA, H. KATSUKI and M. EGASHIRA: Key Eng. Mater., 1999, 159, 175-180.
- (1999) Key Eng. Mater. , vol.159 , pp. 175-180
- Kawahara, A.¹ Katsuki, H.² Egashira, M.³

49
- 0029217190
- J. Y. H. FUH, Y. S. CHOU, A. Y. C. NEE, L. LU and K. C. LEE: Mater. Des., 1995, 16, 23-32.
- (1995) Mater. Des. , vol.16 , pp. 23-32
- Fuh, J.Y.H.¹ Chou, Y.S.² Nee, A.Y.C.³ Lu, L.⁴ Lee, K.C.⁵

50
- 0037103906
- S. MARUO and K. IKUTA: Sensors Actuators A, 2002, 100, 70-76.
- (2002) Sensors Actuators A , vol.100 , pp. 70-76
- Maruo, S.¹ Ikuta, K.²

51
- 0031099548
- M. L. GRIFFITH and J. W. HALLORAN: J. Appl. Phys., 1997, 81, 2538-2546.
- (1997) J. Appl. Phys. , vol.81 , pp. 2538-2546
- Griffith, M.L.¹ Halloran, J.W.²

52
- 0030282531
- H. M. LIAO and T. W. COYLE: J. Can. Ceram. Soc., 1996, 65, 254-262.
- (1996) J. Can. Ceram. Soc. , vol.65 , pp. 254-262
- Liao, H.M.¹ Coyle, T.W.²

53
- 0019637045
- H. KODAMA: Rev. Sci. Intrum., 1981, 52, 1770-1773.
- (1981) Rev. Sci. Intrum. , vol.52 , pp. 1770-1773
- Kodama, H.¹

54
- 0034950889
- R. GLARDON, N. KARAPATIS and V. ROMAND: CIRP Ann., Manuf. Technol., 2001, 50, 133-136.
- (2001) CIRP Ann., Manuf. Technol. , vol.50 , pp. 133-136
- Glardon, R.¹ Karapatis, N.² Romand, V.³

55
- 0034238955
- F. DOREAU, C. CHAPUT and T. CHARTIER: Adv. Eng. Mater., 2000, 2, 493-496.
- (2000) Adv. Eng. Mater. , vol.2 , pp. 493-496
- Doreau, F.¹ Chaput, C.² Chartier, T.³

56
- 0034771908
- T. CHARTIER, C. CHAPUT, F. DOREAU and M. LOISEAU: Key Eng. Mater., 2002, 206, 293-296.
- (2002) Key Eng. Mater. , vol.206 , pp. 293-296
- Chartier, T.¹ Chaput, C.² Doreau, F.³ Loiseau, M.⁴

57
- 14344280464
- A. LICCIULLI, A. GRECO and A. MAFFEZZOLI: Ind. Ceram., 2000, 20, 97-99.
- (2000) Ind. Ceram. , vol.20 , pp. 97-99
- Licciulli, A.¹ Greco, A.² Maffezzoli, A.³

58
- 0035124681
- A. GRECO, A. LICCIULLI and A. MAFFEZZOLI: J. Mater. Sci., 2001, 36, 99-105.
- (2001) J. Mater. Sci. , vol.36 , pp. 99-105
- Greco, A.¹ Licciulli, A.² Maffezzoli, A.³

59
- 0032598274
- J. S. YOUNG, S. R. FOX and K. S. ANSETH: J. Manuf. Sci. Eng. (Trans. ASME), 1999, 121, 474-477.
- (1999) J. Manuf. Sci. Eng. (Trans. ASME) , vol.121 , pp. 474-477
- Young, J.S.¹ Fox, S.R.² Anseth, K.S.³

60
- 0036751275
- S. MONNERET, C. PROVIN, H. LE GALL and S. CORBEL: Microsyst. Technol., 2002, 8, 368-374.
- (2002) Microsyst. Technol. , vol.8 , pp. 368-374
- Monneret, S.¹ Provin, C.² Le Gall, H.³ Corbel, S.⁴

61
- 0036899922
- S. MONNERET, H. LE GALL, V. BADE, F. DEVAUS, A. MOSSET and E. LANTZ: Euro. Phys. J., Appl. Phys., 2002, 20, 213-218.
- (2002) Euro. Phys. J., Appl. Phys. , vol.20 , pp. 213-218
- Monneret, S.¹ Le Gall, H.² Bade, V.³ Devaus, F.⁴ Mosset, A.⁵ Lantz, E.⁶

62
- 0035175615
- M. L. WU, W. H. ZHAO, Y. P. TANG, D. C. LI and B. H. LU: Rapid Prototyp. J., 2001, 77, 268-274.
- (2001) Rapid Prototyp. J. , vol.77 , pp. 268-274
- Wu, M.L.¹ Zhao, W.H.² Tang, Y.P.³ Li, D.C.⁴ Lu, B.H.⁵

63
- 18744376559
- C. SUN and X. ZHANG: J. Appl. Phys., 2002, 92, 4796-4802.
- (2002) J. Appl. Phys. , vol.92 , pp. 4796-4802
- Sun, C.¹ Zhang, X.²

64
- 0036684937
- T. CHARTIER, C. CHAPUT, F. DOREAU and M. LOISEAU: J. Mater. Sci., 2002, 37, 3141-3147.
- (2002) J. Mater. Sci. , vol.37 , pp. 3141-3147
- Chartier, T.¹ Chaput, C.² Doreau, F.³ Loiseau, M.⁴

65
- 0034771983
- P. RISTHAUS, D. GOHRING and R. KNITTER: Key Eng. Mater., 2002, 206, 337-340.
- (2002) Key Eng. Mater. , vol.206 , pp. 337-340
- Risthaus, P.¹ Gohring, D.² Knitter, R.³

66
- 0002138357
- R. KNITTER, D. GOHRING, P. RISTHAUS and J. HAUSSELT: Microsyst. Technol., 2001, 7, 85-90.
- (2001) Microsyst. Technol. , vol.7 , pp. 85-90
- Knitter, R.¹ Gohring, D.² Risthaus, P.³ Hausselt, J.⁴

67
- 0035530965
- R. KNITTER, W. BAUER and D. GOHRING: Adv. Eng. Mater., 2001, 3, 49-54.
- (2001) Adv. Eng. Mater. , vol.3 , pp. 49-54
- Knitter, R.¹ Bauer, W.² Gohring, D.³

68
- 14344273095
- L. W. WANG, J. YANEZ, W. M. SIGMUND and F. ALDINGER: Ind. Ceram., 2000, 20, 93-94.
- (2000) Ind. Ceram. , vol.20 , pp. 93-94
- Wang, L.W.¹ Yanez, J.² Sigmund, W.M.³ Aldinger, F.⁴

69
- 0034957704
- T. M. G. CHU, J. W. HALLORAN, S. J. HOLLISTER and S. E. FEINBERG: J. Mater. Sci., Mater. Med., 2001, 12, 471-478.
- (2001) J. Mater. Sci., Mater. Med. , vol.12 , pp. 471-478
- Chu, T.M.G.¹ Halloran, J.W.² Hollister, S.J.³ Feinberg, S.E.⁴

70
- 0036291108
- New York Acad. Sci.
- T. M. G. CHU, S. J. HOLLISTER, J. W. HALLORAN, S. E. FEINBERT and D. G. ORTON: Repar. Med.: Grow. Tiss. Org., Ann. New York Acad. Sci., 2002, 961, 114-117.
- (2002) Repar. Med.: Grow. Tiss. Org., Ann. , vol.961 , pp. 114-117
- Chu, T.M.G.¹ Hollister, S.J.² Halloran, J.W.³ Feinbert, S.E.⁴ Orton, D.G.⁵

71
- 0036498046
- T. M. G. CHU, D. G. ORTON, S. I. HOLLISTER, S. E. FEINBERG and T. W. HALLORAN: Biomaterials, 2002, 23, 1283-1293.
- (2002) Biomaterials , vol.23 , pp. 1283-1293
- Chu, T.M.G.¹ Orton, D.G.² Hollister, S.I.³ Feinberg, S.E.⁴ Halloran, T.W.⁵

72
- 0032598851
- T. PHAM, S. S. DIMOV and R. S. GAULT: Int. J. Adv. Manuf. Technol., 1999, 15, 674-682.
- (1999) Int. J. Adv. Manuf. Technol. , vol.15 , pp. 674-682
- Pham, D.T.¹ Dimov, S.S.² Gault, R.S.³

73
- 0345533939
- W. Y. MA and P. R. HE: J. Mater. Process. Technol., 1999, 90, 191-197.
- (1999) J. Mater. Process. Technol. , vol.90 , pp. 191-197
- Ma, W.Y.¹ He, P.R.²

74
- 0035739524
- J. H. LEE, R. K. PRUD'HOMME and I. A. AKSAY: J. Mater. Res., 2001, 16 3536-3544.
- (2001) J. Mater. Res. , vol.16 , pp. 3536-3544
- Lee, J.H.¹ Prud'Homme, R.K.² Aksay, I.A.³

75
- 0033938128
- D. T. PHAM: Proc. Inst. Mech. Eng. C, J. Mech. Eng. Sci., 2000, 214, 635-640.
- (2000) Proc. Inst. Mech. Eng. C, J. Mech. Eng. Sci. , vol.214 , pp. 635-640
- Pham, D.T.¹

76
- 0348089416
- Dayton, OH, University of Dayton
- S. S. CRUMP: Proc. 2nd Int. Conf. on 'Rapid prototyping', 354-357; 1991, Dayton, OH, University of Dayton.
- (1991) Proc. 2nd Int. Conf. on 'Rapid Prototyping' , pp. 354-357
- Crump, S.S.¹

77
- 0347694069
- Q. DAO, J. C. FRIMODIG, H. N. LE, X. Z. LI, S. B. PUTNAM, K. GOLDA, J. FOYOS, R. NOORANI and B. FRITZ: Comput. Appl. Eng. Educ., 1999, 7, 186-195.
- (1999) Comput. Appl. Eng. Educ. , vol.7 , pp. 186-195
- Dao, Q.¹ Frimodig, J.C.² Le, H.N.³ Li, X.Z.⁴ Putnam, S.B.⁵ Golda, K.⁶ Foyos, J.⁷ Noorani, R.⁸ Fritz, B.⁹

78
- 0034928573
- C. W. ZIEMIAN and P. M. CRAWN: Rapid Prototyp. J., 2001, 7, 138-147.
- (2001) Rapid Prototyp. J. , vol.7 , pp. 138-147
- Ziemian, C.W.¹ Crawn, P.M.²

79
- 0033076509
- P. KULKARNI and D. DUTTA: J. Manuf. Sci. Eng. (Trans. ASME), 1999, 121, 93-103.
- (1999) J. Manuf. Sci. Eng. (Trans. ASME) , vol.121 , pp. 93-103
- Kulkarni, P.¹ Dutta, D.²

80
- 0034226391
- S. RANGARAJAN, G. QI, N. VENKATARAMAN, A. SAFARI and S. C. DANFORTH: J. Am. Ceram. Soc., 2000, 83, 1663-1669.
- (2000) J. Am. Ceram. Soc. , vol.83 , pp. 1663-1669
- Rangarajan, S.¹ Qi, G.² Venkataraman, N.³ Safari, A.⁴ Danforth, S.C.⁵

81
- 0347459400
- A. SAFARI: Ferroelectrics, 2001, 263, 1345-1354.
- (2001) Ferroelectrics , vol.263 , pp. 1345-1354
- Safari, A.¹

82
- 0027849078
- I. TSAO, S. C. DANFORTH and A. B. METZNER: J. Am. Ceram. Soc., 1993, 76, 2977-2984.
- (1993) J. Am. Ceram. Soc. , vol.76 , pp. 2977-2984
- Tsao, I.¹ Danforth, S.C.² Metzner, A.B.³

83
- 0003472183
- New York, Halstead Press/Wiley
- F. N. COGSWELL: 'Polymer melt rheology', 136-137; 1981, New York, Halstead Press/Wiley.
- (1981) Polymer Melt Rheology , pp. 136-137
- Cogswell, F.N.¹

84
- 0034176635
- Y. N. YAN, R. J. ZHANG, G. D. HONG and X. M. YUAN: Mater. Des., 2000, 21, 93-99.
- (2000) Mater. Des. , vol.21 , pp. 93-99
- Yan, Y.N.¹ Zhang, R.J.² Hong, G.D.³ Yuan, X.M.⁴

85
- 0029546476
- M. GREUL, T. TINTANT and M. GREULICH: Comput. Ind., 1995, 28, 23-28.
- (1995) Comput. Ind. , vol.28 , pp. 23-28
- Greul, M.¹ Tintant, T.² Greulich, M.³

86
- 14344270582
- M. GREUL and R. LENK: Ind. Ceram., 2000, 20, 115-117.
- (2000) Ind. Ceram. , vol.20 , pp. 115-117
- Greul, M.¹ Lenk, R.²

87
- 0348089415
- M. GEIGER, W. STEGER, M. GREUL and M. SINDEL: EARP Newsletter, (3), 1994.
- (1994) EARP Newsletter , Issue.3
- Geiger, M.¹ Steger, W.² Greul, M.³ Sindel, M.⁴

88
- 0033748999
- G. M. LOUS, I. A. CORNEJO, T. F. MCNULTY, A. SAFARI and S. C. DANFORTH: J. Am. Ceram. Soc., 2000, 83, 124-128.
- (2000) J. Am. Ceram. Soc. , vol.83 , pp. 124-128
- Lous, G.M.¹ Cornejo, I.A.² McNulty, T.F.³ Safari, A.⁴ Danforth, S.C.⁵

89
- 0031168347
- A. BANDYOPADHYAY, R. K. PANDA, V. E. JANAS, M. K. AGARWALA, S. C. DANFORTH and A. SAFARI: J. Am. Ceram. Soc., 1997, 80, 1366-1372.
- (1997) J. Am. Ceram. Soc. , vol.80 , pp. 1366-1372
- Bandyopadhyay, A.¹ Panda, R.K.² Janas, V.E.³ Agarwala, M.K.⁴ Danforth, S.C.⁵ Safari, A.⁶

90
- 0032384779
- A. SAFARI, S. DANFORTH, R. PANDA and T. MCNULTY: J. Korean Phys. Soc., 1998, 32, S1733-S1736.
- (1998) J. Korean Phys. Soc. , vol.32
- Safari, A.¹ Danforth, S.² Panda, R.³ McNulty, T.⁴

91
- 0001155381
- A. SAFARI: Mater. Res. Innov., 1999, 2, 263-269.
- (1999) Mater. Res. Innov. , vol.2 , pp. 263-269
- Safari, A.¹

92
- 0008079841
- A. SAFARI and S. C. DANFORTH: Ferroelectrics, 1999, 231, 731-745.
- (1999) Ferroelectrics , vol.231 , pp. 731-745
- Safari, A.¹ Danforth, S.C.²

93
- 0038353813
- S. TURCU, B. JADIDIAN, S. C. DANFORTH and A. SAFARI: J. Electroceram., 2003, 9, 165-171.
- (2003) J. Electroceram. , vol.9 , pp. 165-171
- Turcu, S.¹ Jadidian, B.² Danforth, S.C.³ Safari, A.⁴

94
- 0035812411
- Y. CHEN, D. BARTZOS, Y. LU, E. NIVER, M. E. PILLEUX, M. ALLAHVERDI, S. C. DANFORTH and A. SAFARI: Microwave Opt. Technol. Lett., 2001, 30, 305-307.
- (2001) Microwave Opt. Technol. Lett. , vol.30 , pp. 305-307
- Chen, Y.¹ Bartzos, D.² Lu, Y.³ Niver, E.⁴ Pilleux, M.E.⁵ Allahverdi, M.⁶ Danforth, S.C.⁷ Safari, A.⁸

95
- 0031706409
- A. BANDYOPADHYAY, R. K. PANDA, T. F. MCNULTY, F. MOHAMMADI, S. C. DANFORTH and A. SAFARI: Rapid Prototyp. J., 1998, 4, 37-49.
- (1998) Rapid Prototyp. J. , vol.4 , pp. 37-49
- Bandyopadhyay, A.¹ Panda, R.K.² McNulty, T.F.³ Mohammadi, F.⁴ Danforth, S.C.⁵ Safari, A.⁶

96
- 0036722658
- D. GUO, K. CAI, C. NAN, L. T. LI and Z. L. GUL: Scr. Mater., 2002, 47, 383-387.
- (2002) Scr. Mater. , vol.47 , pp. 383-387
- Guo, D.¹ Cai, K.² Nan, C.³ Li, L.T.⁴ Gul, Z.L.⁵

97
- 0034889492
- M. ALLAHVERDI, S. C. DANFORTH, M. JAFARI and A. SAFARI: J. Euro. Ceram. Soc., 2001, 21, 1485-1490.
- (2001) J. Euro. Ceram. Soc. , vol.21 , pp. 1485-1490
- Allahverdi, M.¹ Danforth, S.C.² Jafari, M.³ Safari, A.⁴

98
- 0036703620
- M. ALLAHVERDI, A. HALL, R. BRENNAN, M. E. EBRAHIMI, N. M. HASH and A. SAFARI: J. Electroceram., 2002, 8, 129-137.
- (2002) J. Electroceram. , vol.8 , pp. 129-137
- Allahverdi, M.¹ Hall, A.² Brennan, R.³ Ebrahimi, M.E.⁴ Hash, N.M.⁵ Safari, A.⁶

99
- 0033328992
- S. BOSE, S. SUGUIRA and A. BANDYOPADHYAY: Scr. Mater., 1999, 41, 1009-1014.
- (1999) Scr. Mater. , vol.41 , pp. 1009-1014
- Bose, S.¹ Suguira, S.² Bandyopadhyay, A.³

100
- 0037120343
- J. E. SINAY, G. M. GRATSON, R. F. SHEPHERD, J. CESARANO and J. A. LEWIS: Adv. Mater., 2002, 14, 1279.
- (2002) Adv. Mater. , vol.14 , pp. 1279
- Sinay, J.E.¹ Gratson, G.M.² Shepherd, R.F.³ Cesarano, J.⁴ Lewis, J.A.⁵

101
- 0037047225
- J. E. SMAY, J. CESARANO and J. A. LEWIS: Langmuir, 2002, 18, 5429-5437.
- (2002) Langmuir , vol.18 , pp. 5429-5437
- Smay, J.E.¹ Cesarano, J.² Lewis, J.A.³

102
- 0034481554
- R. VAIDYANATHAN, J. WALISH, J. L. LOMBARDI, S. KASICHAINULA, P. CALVERT and K. C. COOPER: JOM, 2000, 52, 34-37.
- (2000) JOM , vol.52 , pp. 34-37
- Vaidyanathan, R.¹ Walish, J.² Lombardi, J.L.³ Kasichainula, S.⁴ Calvert, P.⁵ Cooper, K.C.⁶

103
- 0033102406
- J. L. LOMBARDI and P. CALVERT: Polymer, 1999, 40, 1775-1779.
- (1999) Polymer , vol.40 , pp. 1775-1779
- Lombardi, J.L.¹ Calvert, P.²

104
- 0032783871
- J. TYBERG and J. H. BOHN: Mater. Des., 1999, 20, 77-82.
- (1999) Mater. Des. , vol.20 , pp. 77-82
- Tyberg, J.¹ Bohn, J.H.²

105
- 0034924976
- A. A. TSENG and M. TANAKA: Rapid Prototyp. J., 2001, 7, 6-17.
- (2001) Rapid Prototyp. J. , vol.7 , pp. 6-17
- Tseng, A.A.¹ Tanaka, M.²

106
- 0030285283
- M. K. AGARWALA, A. BANDYOPADHYAY, R. VAN WEHREN, A. SAFARI, S. C. DANFORTH, N. A. LANGRANA, V. R. JAMALABAD and P. J. WHALEN: Am. Ceram. Soc. Bull., 1996, 75, 60-65.
- (1996) Am. Ceram. Soc. Bull. , vol.75 , pp. 60-65
- Agarwala, M.K.¹ Bandyopadhyay, A.² Van Wehren, R.³ Safari, A.⁴ Danforth, S.C.⁵ Langrana, N.A.⁶ Jamalabad, V.R.⁷ Whalen, P.J.⁸

107
- 0035324320
- B. A. TUTTLE, J. E. SINAY, J. COSARANO, J. A. VOIGT, T. W. SCOFIELD and W. OLSON: J. Am. Ceram. Soc., 2001, 84, 872-874.
- (2001) J. Am. Ceram. Soc. , vol.84 , pp. 872-874
- Tuttle, B.A.¹ Sinay, J.E.² Cosarano, J.³ Voigt, J.A.⁴ Scofield, T.W.⁵ Olson, W.⁶

108
- 0002939776
- J. CESARANO, R. SEGALMAN and P. CALVERT: Ceram. Ind., 1998, 148, 94-102.
- (1998) Ceram. Ind. , vol.148 , pp. 94-102
- Cesarano, J.¹ Segalman, R.² Calvert, P.³

109
- 0012970362
- C. W. SOUVIGNIER, T. B. SEROCOMBE, S. H. HUO, P. CALVERT and G. B. SCHAFTER: J. Mater. Res., 2001, 16, 2613-2618.
- (2001) J. Mater. Res. , vol.16 , pp. 2613-2618
- Souvignier, C.W.¹ Serocombe, T.B.² Huo, S.H.³ Calvert, P.⁴ Schafter, G.B.⁵

110
- 0036684925
- S. FINKE and F. K. FEENSTRA: J. Mater. Sci., 2002, 37, 3101-3106.
- (2002) J. Mater. Sci. , vol.37 , pp. 3101-3106
- Finke, S.¹ Feenstra, F.K.²

111
- 0346198088
- G. HILMAS: Mater. Technol., 1996, 11, 226-228.
- (1996) Mater. Technol. , vol.11 , pp. 226-228
- Hilmas, G.¹

112
- 0034921082
- B. KHOSHNEVIS, S. BUKKAPATNAM, H. KWON and J. SAITO: Rapid Prototyp. J., 2001, 7 32-41.
- (2001) Rapid Prototyp. J. , vol.7 , pp. 32-41
- Khoshnevis, B.¹ Bukkapatnam, S.² Kwon, H.³ Saito, J.⁴

113
- 0032592475
- Solid Freeform and Additive Fabrication, Warrendale, PA, Materials Research Society
- C. J. GASDASKA, R. CLANCY, V. JAMALABAD and D. DALFONZO: in 'Solid freeform and additive fabrication', MRS Symp. Proc. 542, 79-84; 1999, Warrendale, PA, Materials Research Society.
- (1999) MRS Symp. Proc. , vol.542 , pp. 79-84
- Gasdaska, C.J.¹ Clancy, R.² Jamalabad, V.³ Dalfonzo, D.⁴

114
- 0032592467
- Solid Freeform and Additive Fabrication, Warrendale, PA, Materials Research Society
- S. RANGARAJAM, I. POZSGAI, J. MCINTOSH, R. MCCUISTON, B. L. HARPER, N. LANGRANA, A. SAFARI, S. C. DANFORTH, R. B. CLANCY, C. GASDASKA and P. J. WHALBN: in 'Solid freeform and additive fabrication', MRS Symp. Proc. 542, 97-103; 1999, Warrendale, PA, Materials Research Society.
- (1999) MRS Symp. Proc. , vol.542 , pp. 97-103
- Rangarajam, S.¹ Pozsgai, I.² McIntosh, J.³ McCuiston, R.⁴ Harper, B.L.⁵ Langrana, N.⁶ Safari, A.⁷ Danforth, S.C.⁸ Clancy, R.B.⁹ Gasdaska, C.¹⁰ Whalbn, P.J.¹¹

115
- 0034300134
- S. L. MORISSETTE, J. A. LEWIS, J. CESARANO, D. B. DIMOS and T. Y. BAER: J. Am. Ceram. Soc., 2000, 83, 2409-2416.
- (2000) J. Am. Ceram. Soc. , vol.83 , pp. 2409-2416
- Morissette, S.L.¹ Lewis, J.A.² Cesarano, J.³ Dimos, D.B.⁴ Baer, T.Y.⁵

116
- 0030182110
- M. GREUL: Mater. Technol., 1996, 11, 140-142.
- (1996) Mater. Technol. , vol.11 , pp. 140-142
- Greul, M.¹

117
- 0032592420
- Solid Freeform and Additive Fabrication, Warrendale, PA, Materials Research Society
- P. YANG, D. DIMOS, M. A. RODRIGUEZ, R. F. HUANG, S. DAI and D. WILCOX: in 'Solid freeform and additive fabrication', MRS Symp. Proc. 542, 159-164; 1999, Warrendale, PA, Materials Research Society.
- (1999) MRS Symp. Proc. , vol.542 , pp. 159-164
- Yang, P.¹ Dimos, D.² Rodriguez, M.A.³ Huang, R.F.⁴ Dai, S.⁵ Wilcox, D.⁶

118
- 0032688496
- B. H. KING, D. DIMOS, P. YANG and S. L. MORISSETTE: J. Electroceram., 1999, 3, 173-178.
- (1999) J. Electroceram. , vol.3 , pp. 173-178
- King, B.H.¹ Dimos, D.² Yang, P.³ Morissette, S.L.⁴

119
- 0036343535
- V. TOHVER, S. L. MORISSETTE, J. A. LEWIS, B. A. TUTTLE, J. A. VOIGT and D. B. DIMOS: J. Am. Ceram. Soc., 2002, 85, 123-128.
- (2002) J. Am. Ceram. Soc. , vol.85 , pp. 123-128
- Tohver, V.¹ Morissette, S.L.² Lewis, J.A.³ Tuttle, B.A.⁴ Voigt, J.A.⁵ Dimos, D.B.⁶

120
- 0035526539
- S. L. MORISSETTE, J. L. LEWIS, P. G. CLEM, J. CESARANO and D. B. DIMOS: J. Am. Ceram. Soc., 2001, 84, 2462-2468.
- (2001) J. Am. Ceram. Soc. , vol.84 , pp. 2462-2468
- Morissette, S.L.¹ Lewis, J.L.² Clem, P.G.³ Cesarano, J.⁴ Dimos, D.B.⁵

121
- 0026930618
- D. L. BOURELL, H. L. MARCUS, J. W. BARLOW and J. J. SEAMAN: Int. J. Powder Metall., 1992, 28, 369-381.
- (1992) Int. J. Powder Metall. , vol.28 , pp. 369-381
- Bourell, D.L.¹ Marcus, H.L.² Barlow, J.W.³ Seaman, J.J.⁴

122
- 0029726999
- C. L. ATWOOD, M. C. MAGUIRE, B. T. PARDO and E. A. BRYCE: SAMPE J., 1996, 32, 55-60.
- (1996) SAMPE J. , vol.32 , pp. 55-60
- Atwood, C.L.¹ Maguire, M.C.² Pardo, B.T.³ Bryce, E.A.⁴

123
- 0032787256
- S. DAS, M. WOHLERT, J. J. SEAMAN and D. L. BOURELL: Mater. Des., 1999, 20, 115-121.
- (1999) Mater. Des. , vol.20 , pp. 115-121
- Das, S.¹ Wohlert, M.² Seaman, J.J.³ Bourell, D.L.⁴

124
- 0031073205
- J. PEGNA: Autom. Constr., 1997, 5, 427-437.
- (1997) Autom. Constr. , vol.5 , pp. 427-437
- Pegna, J.¹

125
- 17044440922
- X. LI, H. CHOI and Y. YANG: Thin Solid Films, 2002, 420-421, 515-523.
- (2002) Thin Solid Films , vol.420-421 , pp. 515-523
- Li, X.¹ Choi, H.² Yang, Y.³

126
- 0042122511
- S. YANG and J. R. G. EVANS: Powder Technol., 2003, 133, 251-254.
- (2003) Powder Technol. , vol.133 , pp. 251-254
- Yang, S.¹ Evans, J.R.G.²

127
- 0033686240
- Proc. Inst. Mech. Eng. B
- D. T. PHAM and X. WANG: Proc. Inst. Mech. Eng. B, J. Eng. Manuf., 2000, 214, 425-430.
- (2000) J. Eng. Manuf. , vol.214 , pp. 425-430
- Pham, D.T.¹ Wang, X.²

128
- 0042314879
- ed. A. J. Lightman et al., Dayton, OH, University of Dayton
- K. MCALEA, P. FORDERHASE, U. HEJMADI and C. NELSON: Proc. 7th Int. Conf. on 'Rapid prototyping', (ed. A. J. Lightman et al.), 23-33; 1997, Dayton, OH, University of Dayton.
- (1997) Proc. 7th Int. Conf. on 'Rapid Prototyping' , pp. 23-33
- McAlea, K.¹ Forderhase, P.² Hejmadi, U.³ Nelson, C.⁴

129
- 0005305361
- ed. H. L. Marcus et al., Austin, TX, University of Texas at Austin
- N. K. VAIL and J. W. BARLOW: Proc. Symp. on 'Solid freeform fabrication', (ed. H. L. Marcus et al.), 124-130; 1992, Austin, TX, University of Texas at Austin.
- (1992) Proc. Symp. on 'Solid Freeform Fabrication' , pp. 124-130
- Vail, N.K.¹ Barlow, J.W.²

130
- 0011598774
- ed. H. L. Marcus et al., Austin, TX, University of Texas at Austin
- U. LAKSHMINARAYAN and H. L. MARCUS: Proc. Symp. on 'Solid freeform fabrication', (ed. H. L. Marcus et al.), 44-53; 1992, Austin, TX, University of Texas at Austin.
- (1992) Proc. Symp. on 'Solid Freeform Fabrication' , pp. 44-53
- Lakshminarayan, U.¹ Marcus, H.L.²

131
- 0036534415
- W. Z. WU and M. G. YAN: J. Adv. Mater., 2002, 34, 25-28.
- (2002) J. Adv. Mater. , vol.34 , pp. 25-28
- Wu, W.Z.¹ Yan, M.G.²

132
- 0343782907
- ed. H. L. Marcus et al., Austin, TX, University of Texas at Austin
- P. K. SUBRAMANIAN, G. ZONG and H. L. MARCUS: Proc. Symp. on 'Solid freeform fabrication', (ed. H. L. Marcus et al.), 63-71; 1992, Austin, TX, University of Texas at Austin.
- (1992) Proc. Symp. on 'Solid Freeform Fabrication' , pp. 63-71
- Subramanian, P.K.¹ Zong, G.² Marcus, H.L.³

133
- 0027677553
- J. C. NELSON, S. XUE, J. W. BARLOW, J. J. SEAMAN, H. L. MARCUS and D. L. BOURELL: Ind. Eng. Chem. Res., 1993, 32, 2305-2317.
- (1993) Ind. Eng. Chem. Res. , vol.32 , pp. 2305-2317
- Nelson, J.C.¹ Xue, S.² Barlow, J.W.³ Seaman, J.J.⁴ Marcus, H.L.⁵ Bourell, D.L.⁶

134
- 0010054392
- J. C. NELSON, N. K. VAIL, J. W. BARLOW, J. J. BEAMAN, D. L. BOURELL and H. L. MARCUS: Ind. Eng. Chem. Res., 1995, 34, 1641-1651.
- (1995) Ind. Eng. Chem. Res. , vol.34 , pp. 1641-1651
- Nelson, J.C.¹ Vail, N.K.² Barlow, J.W.³ Beaman, J.J.⁴ Bourell, D.L.⁵ Marcus, H.L.⁶

135
- 0001612488
- Proc. Inst. Mech. Eng. B
- N. VOLPATO, T. H. C. CHILDS, T. D. STEWART and P. WATSON: Proc. Inst. Mech. Eng. B, J. Eng. Manuf., 2001, 215, 873-876.
- (2001) J. Eng. Manuf. , vol.215 , pp. 873-876
- Volpato, N.¹ Childs, T.H.C.² Stewart, T.D.³ Watson, P.⁴

136
- 0035273699
- A. SIMCHI, F. PETZOLDT and H. POHL: Int. J. Powder Metall., 2001, 37, 49-61.
- (2001) Int. J. Powder Metall. , vol.37 , pp. 49-61
- Simchi, A.¹ Petzoldt, F.² Pohl, H.³

137
- 0035440352
- J. BEUTH and N. KLINGBEIL: JOM, 2001, 53, 36-39.
- (2001) JOM , vol.53 , pp. 36-39
- Beuth, J.¹ Klingbeil, N.²

138
- 13044249174
- M. L. GRIFFITH, M. E. SCHLIENGER, L. D. HARWELL, M. S. OLIVER, M. D. BALDWIN, M. T. ENSZ, M. ESSIEN, J. BROOKS, C. V. ROBINO, J. E. SMUGERESKY, W. H. HOFMEISTER, M. J. WERT and D. V. NELSON: Mater. Des., 1999, 20, 107-113.
- (1999) Mater. Des. , vol.20 , pp. 107-113
- Griffith, M.L.¹ Schlienger, M.E.² Harwell, L.D.³ Oliver, M.S.⁴ Baldwin, M.D.⁵ Ensz, M.T.⁶ Essien, M.⁷ Brooks, J.⁸ Robino, C.V.⁹ Smugeresky, J.E.¹⁰ Hofmeister, W.H.¹¹ Wert, M.J.¹² Nelson, D.V.¹³

139
- 0037360372
- A. V. GUSAROV, T. LAOUI, L. FROYEN and V. I. TITOV: Int. J. Heat Mass Transf., 2003, 46, 1103-1109.
- (2003) Int. J. Heat Mass Transf. , vol.46 , pp. 1103-1109
- Gusarov, A.V.¹ Laoui, T.² Froyen, L.³ Titov, V.I.⁴

140
- 0036534445
- P. FISCHER, N. KARAPATIS, V. ROMAND, R. GLARDON and H. P. WEBER: Appl. Phys. A, Mater. Sci. Process., 2002, 74, 467-474.
- (2002) Appl. Phys. A, Mater. Sci. Process. , vol.74 , pp. 467-474
- Fischer, P.¹ Karapatis, N.² Romand, V.³ Glardon, R.⁴ Weber, H.P.⁵

141
- 0348089412
- ed. H. L. Marcus, Austin, TX, University of Texas at Austin
- L. S. MELVIN and J. J. BEAMAN: Proc. Symp. on 'Solid freeform fabrication', (ed. H. L. Marcus), 171-177; 1991, Austin, TX, University of Texas at Austin.
- (1991) Proc. Symp. on 'Solid Freeform Fabrication' , pp. 171-177
- Melvin, L.S.¹ Beaman, J.J.²

142
- 79960892828
- ed. H. L. Marcus et al., Austin, TX, University of Texas at Austin
- L. S. MELVIN and J. J. BEAMAN: Proc. 3rd Symp. on 'Solid freeform fabrication', (ed. H. L. Marcus et al.), 118-123; 1992, Austin, TX, University of Texas at Austin.
- (1992) Proc. 3rd Symp. on 'Solid Freeform Fabrication' , pp. 118-123
- Melvin, L.S.¹ Beaman, J.J.²

143
- 0005105362
- ed. H. L. Marcus et al., Austin, TX, University of Texas at Austin
- D. E. BUNNELL, S. DAS, D. L. BOURELL, J. B. BEAMAN and H. L. MARCUS: Proc. Symp. on 'Solid freeform fabrication', (ed. H. L. Marcus et al.), 440-447; 1995, Austin, TX, University of Texas at Austin.
- (1995) Proc. Symp. on 'Solid Freeform Fabrication' , pp. 440-447
- Bunnell, D.E.¹ Das, S.² Bourell, D.L.³ Beaman, J.B.⁴ Marcus, H.L.⁵

144
- 0034217335
- L. LU, J. Y. H. FUH, Z. D. CHEN, C. C. LEONG and Y. S. WONG: Mater. Res. Bull., 2000, 35, 1555-1561.
- (2000) Mater. Res. Bull. , vol.35 , pp. 1555-1561
- Lu, L.¹ Fuh, J.Y.H.² Chen, Z.D.³ Leong, C.C.⁴ Wong, Y.S.⁵

145
- 0000756736
- J. D. CAWLEY: Curr. Opin. Solid State Mater. Sci., 1999, 4, 483-489.
- (1999) Curr. Opin. Solid State Mater. Sci. , vol.4 , pp. 483-489
- Cawley, J.D.¹

146
- 0032179584
- D. A. KLOSTERMAN, R. P. CHARTOFF, N. R. OSBORNE, G. A. GRAVES, A. LIGHTMAN, G. HAN, A. BEZEREDI, S. RODRIGUES, S. PAK, G. KALMANOVICH, L. DODIN and S. TU: Am. Ceram. Soc. Bull., 1998, 77, 69-74.
- (1998) Am. Ceram. Soc. Bull. , vol.77 , pp. 69-74
- Klosterman, D.A.¹ Chartoff, R.P.² Osborne, N.R.³ Graves, G.A.⁴ Lightman, A.⁵ Han, G.⁶ Bezeredi, A.⁷ Rodrigues, S.⁸ Pak, S.⁹ Kalmanovich, G.¹⁰ Dodin, L.¹¹ Tu, S.¹²

147
- 0037410806
- A. DAS, G. MADRAS, N. DASGUPTA and A. M. UMARJI: J. Euro. Ceram. Soc., 2003, 23, 1013-1017.
- (2003) J. Euro. Ceram. Soc. , vol.23 , pp. 1013-1017
- Das, A.¹ Madras, G.² Dasgupta, N.³ Umarji, A.M.⁴

148
- 0034803156
- Y. ZHANG, X. HE, J. HAN, X. DO and Z. ZHANG: Int. J Adv. Manuf. Technol., 2001, 17, 531-534.
- (2001) Int. J Adv. Manuf. Technol. , vol.17 , pp. 531-534
- Zhang, Y.¹ He, X.² Han, J.³ Do, X.⁴ Zhang, Z.⁵

149
- 0342431696
- D. KOCHAN and T. HIMMER: Ceram. Forum Int., 1999, 76, 5-9.
- (1999) Ceram. Forum Int. , vol.76 , pp. 5-9
- Kochan, D.¹ Himmer, T.²

150
- 0035254269
- Y. M. ZHANG, J. C. HAN, X. H. ZHANG, X. D. HE, Z. Q. LI and S. Y. DU: Mater. Sci. Eng., 2001, 299, 218-224.
- (2001) Mater. Sci. Eng. , vol.299 , pp. 218-224
- Zhang, Y.M.¹ Han, J.C.² Zhang, X.H.³ He, X.D.⁴ Li, Z.Q.⁵ Du, S.Y.⁶

151
- 0030684235
- D. KLOSTERMANN, R. CHARTOFF, N. OSBORNE and G. GRAVES: Ceram. Eng. Sci. Proc., 1997, 18, 113-120.
- (1997) Ceram. Eng. Sci. Proc. , vol.18 , pp. 113-120
- Klostermann, D.¹ Chartoff, R.² Osborne, N.³ Graves, G.⁴

152
- 0026369845
- ed. A. Bachi and J. J. Seaman, New York, American Society of Mechanical Engineers
- S. S. CRUMP: 'Intelligent design and manufacturing for prototyping', (ed. A. Bachi and J. J. Seaman), Vol. 50, 53-60; 1991, New York, American Society of Mechanical Engineers.
- (1991) Intelligent Design and Manufacturing for Prototyping , vol.50 , pp. 53-60
- Crump, S.S.¹

153
- 0032315266
- J. P. KRUTH, M. C. LEU and T. NAKAGAWA: CIRP Ann., 1998, 47, 525-540.
- (1998) CIRP Ann. , vol.47 , pp. 525-540
- Kruth, J.P.¹ Leu, M.C.² Nakagawa, T.³

154
- 0029639810
- O. LEHMANN and M. STUKE: Science, 1995, 270, 1644-1646.
- (1995) Science , vol.270 , pp. 1644-1646
- Lehmann, O.¹ Stuke, M.²

155
- 24844449910
- O. LEHMANN and M. STUKE: J. Phys. IV, 1995, 5, C5-601-C5-605.
- (1995) J. Phys. IV , vol.5
- Lehmann, O.¹ Stuke, M.²

156
- 0031043478
- M. C. WANKE, O. LEHMANN, K. MULLER, Q. Z. WEN and M. STUKE: Science, 1997, 275, 1284-1286.
- (1997) Science , vol.275 , pp. 1284-1286
- Wanke, M.C.¹ Lehmann, O.² Muller, K.³ Wen, Q.Z.⁴ Stuke, M.⁵

157
- 0032158033
- J. L. MAXWELL, J. PEGNA and D. V. MESSIA: Appl. Phys. A, Mater. Sci. Process., 1998, 67, 323-329.
- (1998) Appl. Phys. A, Mater. Sci. Process. , vol.67 , pp. 323-329
- Maxwell, J.L.¹ Pegna, J.² Messia, D.V.³

158
- 0029633955
- F. T. WALLENBERGER: Science, 1995, 267, 1274-1275.
- (1995) Science , vol.267 , pp. 1274-1275
- Wallenberger, F.T.¹

159
- 0033185403
- L. SUN and L. L. SHAW: Metall. Mater. Trans. A, 1999, 30A, 2549-2551.
- (1999) Metall. Mater. Trans. A , vol.30 A , pp. 2549-2551
- Sun, L.¹ Shaw, L.L.²

160
- 0032592480
- Solid Freeform and Additive Fabrication, Warrendale, PA, Materials Research Society
- L. SUN, J. E. CROCKER, L. L. SHAW and H. L. MARCUS: in 'Solid freeform and additive fabrication', MRS Symp. Proc. 542, 37-44; 1999, Warrendale, PA, Materials Research Society.
- (1999) MRS Symp. Proc. , vol.542 , pp. 37-44
- Sun, L.¹ Crocker, J.E.² Shaw, L.L.³ Marcus, H.L.⁴

161
- 0035568995
- C. DUTY, D. JEAN and W. J. LACKEY: Int. Mater. Rev., 2001, 46, 271-287.
- (2001) Int. Mater. Rev. , vol.46 , pp. 271-287
- Duty, C.¹ Jean, D.² Lackey, W.J.³

162
- 84889544828
- ed. T. S. Srivatsan and J. J. Moore, Warrendale, PA, TMS
- B. R. BIRMINGHAM, J. V. TOMPKINS, S. L. HARRISON and H. L. MARCUS: Proc. 2nd Int. Conf. on 'Beam processing of advanced materials', (ed. T. S. Srivatsan and J. J. Moore), 105-117; 1996, Warrendale, PA, TMS.
- (1996) Proc. 2nd Int. Conf. on 'Beam Processing of Advanced Materials' , pp. 105-117
- Birmingham, B.R.¹ Tompkins, J.V.² Harrison, S.L.³ Marcus, H.L.⁴

163
- 0043020111
- ed. H. L. Marcus et al., Austin, TX, University of Texas at Austin
- J. MAXWELL and J. PEGNA: Proc. Symp. on 'Solid freeform fabrication', (ed. H. L. Marcus et al.), 143-150; 1995, Austin, TX, University of Texas at Austin.
- (1995) Proc. Symp. on 'Solid Freeform Fabrication' , pp. 143-150
- Maxwell, J.¹ Pegna, J.²

164
- 0026954313
- E. SACHS, M. CIMA, P. WILLIAMS, D. BRANCAZIO and J. CORNIE: J. Eng. Ind., 1992, 114, 481-488.
- (1992) J. Eng. Ind. , vol.114 , pp. 481-488
- Sachs, E.¹ Cima, M.² Williams, P.³ Brancazio, D.⁴ Cornie, J.⁵

165
- 0027205875
- E. SACHS, M. CIMA, J. CORNIE, D. BRANCAZIO, J. BREDT, A. CURODEAU, T. FAN, S. KHANUJA, A. LAUDER, J. LEE and S. MICHAELS: CIRP Ann., 1993, 42, 257-260.
- (1993) CIRP Ann. , vol.42 , pp. 257-260
- Sachs, E.¹ Cima, M.² Cornie, J.³ Brancazio, D.⁴ Bredt, J.⁵ Curodeau, A.⁶ Fan, T.⁷ Khanuja, S.⁸ Lauder, A.⁹ Lee, J.¹⁰ Michaels, S.¹¹

166
- 24844440521
- Dearborn, MI, Society of Manufacturing Engineers
- Y. UZIEL: SME technical paper PE98-117-2, 1-8; 1997, Dearborn, MI, Society of Manufacturing Engineers.
- (1997) SME Technical Paper , vol.PE98-117-2 , pp. 1-8
- Uziel, Y.¹

167
- 0346828653
- US Patent 6036777, 14 March
- E. M. SACHS: 'Powder dispensing apparatus using vibration', US Patent 6036777, 14 March 2000.
- (2000) Powder Dispensing Apparatus Using Vibration
- Sachs, E.M.¹

168
- 0041568713
- ed. H. L. Marcus et al., Austin, TX, University of Texas at Austin
- S. MICHAELS, E. M. SACHS and M. J. CIMA: Proc. Symp. on 'Solid freeform fabrication', (ed. H. L. Marcus et al.), 244-250; 1992, Austin, TX, University of Texas at Austin.
- (1992) Proc. Symp. on 'Solid Freeform Fabrication' , pp. 244-250
- Michaels, S.¹ Sachs, E.M.² Cima, M.J.³

169
- 0031353285
- A. CARRION: Rapid Prototyp. J., 1997, 3, 99-115.
- (1997) Rapid Prototyp. J. , vol.3 , pp. 99-115
- Carrion, A.¹

170
- 0031649588
- j. YOO, K. M. CHO, W. S. BAE, M. CIMA and S. SURESH: J. Am. Ceram. Soc., 1998, 81, 21-32.
- (1998) J. Am. Ceram. Soc. , vol.81 , pp. 21-32
- Yoo, J.¹ Cho, K.M.² Bae, W.S.³ Cima, M.⁴ Suresh, S.⁵

171
- 0032794921
- T. R. JACKSON, H. LIU, N. M. PATRIKALAKIS, E. M. SACHS and M. J. CIMA: Mater. Des., 1999, 20, 63-75.
- (1999) Mater. Des. , vol.20 , pp. 63-75
- Jackson, T.R.¹ Liu, H.² Patrikalakis, N.M.³ Sachs, E.M.⁴ Cima, M.J.⁵

172
- 0033813833
- A. CURODEAU, E. SACHS and S. CALDARISE: J. Biomed. Mater. Res., 2000, 53, 525-535.
- (2000) J. Biomed. Mater. Res. , vol.53 , pp. 525-535
- Curodeau, A.¹ Sachs, E.² Caldarise, S.³

173
- 0032592458
- Solid Freeform and Additive Fabrication, Warrendale, PA, Materials Research Society
- S. A. UHLAND, R. K. HOLMAN, M. J. CIMA, E. SACHS and Y. ENOKIDO: in 'Solid freeform and additive fabrication', MRS Symp. Proc. 542, 153-158; 1999, Warrendale, PA, Materials Research Society.
- (1999) MRS Symp. Proc. , vol.542 , pp. 153-158
- Uhland, S.A.¹ Holman, R.K.² Cima, M.J.³ Sachs, E.⁴ Enokido, Y.⁵

174
- 0021374160
- F. F. LANGE: J. Amer. Ceram. Soc., 1984, 66, 83-89.
- (1984) J. Amer. Ceram. Soc. , vol.66 , pp. 83-89
- Lange, F.F.¹

175
- 0036353245
- R. K. HOLMAN, S. A. UHLAND, M. J. CIMA and E. SACHS: J. Colloid Interf. Sci., 2002, 247, 266-274.
- (2002) J. Colloid Interf. Sci. , vol.247 , pp. 266-274
- Holman, R.K.¹ Uhland, S.A.² Cima, M.J.³ Sachs, E.⁴

176
- 0036351040
- R. K. HOLMAN, M. J. CIMA, S. A. UHLAND and E. SACHS: J. Colloid Interf. Sci., 2002, 249, 432-440.
- (2002) J. Colloid Interf. Sci. , vol.249 , pp. 432-440
- Holman, R.K.¹ Cima, M.J.² Uhland, S.A.³ Sachs, E.⁴

177
- 0036545236
- J. MOON, J. E. GRAU, V. KNEZEVIC, M. J. CIMA and E. M. SACHS: J. Am. Ceram. Soc., 2002, 85, 755-762.
- (2002) J. Am. Ceram. Soc. , vol.85 , pp. 755-762
- Moon, J.¹ Grau, J.E.² Knezevic, V.³ Cima, M.J.⁴ Sachs, E.M.⁵

178
- 0034299426
- J. MOON, J. E. GRAU, M. J. CIMA and E. M. SACHS: J. Am. Ceram. Soc., 2000, 83, 2401-2408.
- (2000) J. Am. Ceram. Soc. , vol.83 , pp. 2401-2408
- Moon, J.¹ Grau, J.E.² Cima, M.J.³ Sachs, E.M.⁴

179
- 0029488767
- S-F. F. LEE, E. SACHS and M. CIMA: Rapid Prototyp. J., 1995, 1, 24-37.
- (1995) Rapid Prototyp. J. , vol.1 , pp. 24-37
- Lee, S.-F.F.¹ Sachs, E.² Cima, M.³

180
- 0039009728
- A. M. ALLEN and E. M. SACHS: Met. Mater. (Korea), 2000, 6, 589-594.
- (2000) Met. Mater. (Korea) , vol.6 , pp. 589-594
- Allen, A.M.¹ Sachs, E.M.²

181
- 0009671841
- J. MOON, A. C. CABALLERO, L. HOZER, Y. M. CHIANG and M. J. CIMA: Mater. Sci. Eng. A, 2001, 298, 110-119.
- (2001) Mater. Sci. Eng. A , vol.298 , pp. 110-119
- Moon, J.¹ Caballero, A.C.² Hozer, L.³ Chiang, Y.M.⁴ Cima, M.J.⁵

182
- 0033738335
- E. SACHS, E. WYLONIS, S. ALLEN, M. CIMA and H. L. GUO: Polym. Eng. Sci, 2000, 40, 1232-1247.
- (2000) Polym. Eng. Sci , vol.40 , pp. 1232-1247
- Sachs, E.¹ Wylonis, E.² Allen, S.³ Cima, M.⁴ Guo, H.L.⁵

183
- 0035698610
- J. R. G. EVANS: Br. Ceram. Trans., 2001, 100, 124-128.
- (2001) Br. Ceram. Trans. , vol.100 , pp. 124-128
- Evans, J.R.G.¹

184
- 0002952155
- B. J. RAMSEY, P. S. A. EVANS and D. HARRISON: J. Electronic Manuf., 1997, 7, 63-67.
- (1997) J. Electronic Manuf. , vol.7 , pp. 63-67
- Ramsey, B.J.¹ Evans, P.S.A.² Harrison, D.³

185
- 0033312310
- A. J. WALTON, J. T. M. STEVENSON, L. I. HAWORTH, M. FALLON, P. S. A. EVANS, B. J. RAMSEY and D. HARRISON: IEICE Trans. Electron., 1999, E82C, 576-581.
- (1999) IEICE Trans. Electron. , vol.E82C , pp. 576-581
- Walton, A.J.¹ Stevenson, J.T.M.² Haworth, L.I.³ Fallon, M.⁴ Evans, P.S.A.⁵ Ramsey, B.J.⁶ Harrison, D.⁷

186
- 0031096187
- P. R. SHEPHERD, P. S. A. EVANS, B. J. RAMSEY and D. J. HARRISONI Electron. Lett., 1997, 33 483-484.
- (1997) Electron. Lett. , vol.33 , pp. 483-484
- Shepherd, P.R.¹ Evans, P.S.A.² Ramsey, B.J.³ Harrisoni, D.J.⁴

187
- 0029409342
- P. F. BLAZDELL, J. R. G. EVANS, M. J. EDIRISINGHE, P. SHAW and M. J. BINSTEAD: J. Mater. Sci. Lett., 1995, 14, 1562-1565.
- (1995) J. Mater. Sci. Lett. , vol.14 , pp. 1562-1565
- Blazdell, P.F.¹ Evans, J.R.G.² Edirisinghe, M.J.³ Shaw, P.⁴ Binstead, M.J.⁵

188
- 0031097380
- M. J. EDIRISINGHE: Mater. World, 1997, 5, 138-140.
- (1997) Mater. World , vol.5 , pp. 138-140
- Edirisinghe, M.J.¹

189
- 0001568291
- M. MOTT and J. R. G. EVANS: Mater. Sci. Eng. A, 1999, 271, 344-352.
- (1999) Mater. Sci. Eng. A , vol.271 , pp. 344-352
- Mott, M.¹ Evans, J.R.G.²

190
- 0001776654
- ed. R. C. Durbeck and S. Sherr, New York/Boston, Academic Press
- W. J. LLOYD and H. H. TAUB: in 'Output hardcopy devices', (ed. R. C. Durbeck and S. Sherr), 311-370; 1988, New York/Boston, Academic Press.
- (1988) Output Hardcopy Devices , pp. 311-370
- Lloyd, W.J.¹ Taub, H.H.²

191
- 0019613555
- M. R. KEELING: Phys. Technol., 1981, 12, 196-203.
- (1981) Phys. Technol. , vol.12 , pp. 196-203
- Keeling, M.R.¹

192
- 0031683832
- H. P. LE: J. Imaging Sci. Technol., 1998, 42, 49-62.
- (1998) J. Imaging Sci. Technol. , vol.42 , pp. 49-62
- Le, H.P.¹

193
- 0343720036
- L. KUHN and R. A. MYERS: Am. Sci., 1979, 240, 120-132.
- (1979) Am. Sci. , vol.240 , pp. 120-132
- Kuhn, L.¹ Myers, R.A.²

194
- 0032533867
- E. LITBORN, M. STJERNSTRÖM and J. ROERAADE: Anal. Chem., 1998, 70, 4847-4852.
- (1998) Anal. Chem. , vol.70 , pp. 4847-4852
- Litborn, E.¹ Stjernström, M.² Roeraade, J.³

195
- 0032533878
- P. ÖNNERFJORD, J. NILSSON, L. WALLMAN, T. LAURELL and G. MARKO-VARGA: Anal. Chem., 1998, 70, 4755-4760.
- (1998) Anal. Chem. , vol.70 , pp. 4755-4760
- Önnerfjord, P.¹ Nilsson, J.² Wallman, L.³ Laurell, T.⁴ Marko-Varga, G.⁵

196
- 0032401681
- A. V. LEMMO, D. J. ROSE and T. C. TISONE: Curr. Opin. Biotechnol., 1998, 9, 615-617.
- (1998) Curr. Opin. Biotechnol. , vol.9 , pp. 615-617
- Lemmo, A.V.¹ Rose, D.J.² Tisone, T.C.³

197
- 0001799374
- K. R. OLDENBURG, J-H. ZHANG, T. CHEN, A. MAFFIA, K. F. BLOM, A. P. COMBS and T. D. Y. CHUNG: J. Biomolec. Screen., 1998, 3, 55-62.
- (1998) J. Biomolec. Screen. , vol.3 , pp. 55-62
- Oldenburg, K.R.¹ Zhang, J.-H.² Chen, T.³ Maffia, A.⁴ Blom, K.F.⁵ Combs, A.P.⁶ Chung, T.D.Y.⁷

198
- 0024233173
- R. KLEBE: Exp. Cell. Res., 1988, 179, 362-373.
- (1988) Exp. Cell. Res. , vol.179 , pp. 362-373
- Klebe, R.¹

199
- 0023560045
- K. F. TENG and R. W. VEST: IEEE Trans. Comp. Hybrids Manuf. Technol., 1987, 10, 545-549.
- (1987) IEEE Trans. Comp. Hybrids Manuf. Technol. , vol.10 , pp. 545-549
- Teng, K.F.¹ Vest, R.W.²

200
- 0024070375
- K. F. TENG and R. W. VEST: IEEE Trans. Comp. Hybrids Manuf. Technol., 1988, 11, 291-297.
- (1988) IEEE Trans. Comp. Hybrids Manuf. Technol. , vol.11 , pp. 291-297
- Teng, K.F.¹ Vest, R.W.²

201
- 0032472660
- T. R. HEBNER, C. C. WU, D. MARCY, M. H. LU and J. C. STURM: Appl. Phys. Lett., 1998, 72, 519-521.
- (1998) Appl. Phys. Lett. , vol.72 , pp. 519-521
- Hebner, T.R.¹ Wu, C.C.² Marcy, D.³ Lu, M.H.⁴ Sturm, J.C.⁵

202
- 0030678276
- A. ATKINSON, J. DOORBAR, A. JUDD, D. L. SEGAL and P. J. WHITE: J. Sol-Gel Sci. Technol., 1997, 8, 1093-1097.
- (1997) J. Sol-gel Sci. Technol. , vol.8 , pp. 1093-1097
- Atkinson, A.¹ Doorbar, J.² Judd, A.³ Segal, D.L.⁴ White, P.J.⁵

203
- 0031674531
- S. J. KIM and D. E. MCKEAN: J. Mater. Sci. Lett., 1998, 17, 141-144.
- (1998) J. Mater. Sci. Lett. , vol.17 , pp. 141-144
- Kim, S.J.¹ McKean, D.E.²

204
- 0346828651
- to be published
- H. AGO, J. QI, K. TSUKAGOSHI, K. MURATA, S. OHSHIMA, Y. AOYAGI and M. YUMURA: J. Electroanal. Chem., to be published.
- J. Electroanal. Chem.
- Ago, H.¹ Qi, J.² Tsukagoshi, K.³ Murata, K.⁴ Ohshima, S.⁵ Aoyagi, Y.⁶ Yumura, M.⁷

205
- 0001093176
- J. W. S. RAYLEIGH: Philos. Mag., 1882, 14, 184-186.
- (1882) Philos. Mag. , vol.14 , pp. 184-186
- Rayleigh, J.W.S.¹

206
- 0346198079
- C. WEBER: Z. Angew. Math., 1939, 11, 136-154.
- (1939) Z. Angew. Math. , vol.11 , pp. 136-154
- Weber, C.¹

207
- 0017574312
- W. T. PIMBLEY and H. C. LEE: IBM J. Res Dev., 1977, 21, 21-30.
- (1977) IBM J. Res Dev. , vol.21 , pp. 21-30
- Pimbley, W.T.¹ Lee, H.C.²

208
- 0017576083
- G. L. FILLMORE, W. L. BUEHNBR and D. L. WEST: IBM J. Res. Dev., 1977, 21, 37-47.
- (1977) IBM J. Res. Dev. , vol.21 , pp. 37-47
- Fillmore, G.L.¹ Buehnbr, W.L.² West, D.L.³

209
- 0021425007
- F. C. LEE, R. N. MILLS and F. E. TULKE: IBM J. Res. Dev., 1984, 28, 307-313.
- (1984) IBM J. Res. Dev. , vol.28 , pp. 307-313
- Lee, F.C.¹ Mills, R.N.² Tulke, F.E.³

210
- 0033332517
- J. H. SONG, M. J. EDIRISINGHE and J. R. G. EVANS: J. Am. Ceram. Soc., 1999, 82, 3374-3380.
- (1999) J. Am. Ceram. Soc. , vol.82 , pp. 3374-3380
- Song, J.H.¹ Edirisinghe, M.J.² Evans, J.R.G.³

211
- 0032047740
- W. D. TENG and M. J. EDIRISINGHE: J. Am. Ceram. Soc., 1998, 81, 1033-1036.
- (1998) J. Am. Ceram. Soc. , vol.81 , pp. 1033-1036
- Teng, W.D.¹ Edirisinghe, M.J.²

212
- 0033880265
- P. F. BLAZDELL and J. R. G. EVANS: J. Mater. Process. Technol., 2000, 99, 94-102.
- (2000) J. Mater. Process. Technol. , vol.99 , pp. 94-102
- Blazdell, P.F.¹ Evans, J.R.G.²

213
- 0034707774
- P. F. BLAZDELL and S. KURODA: Surf. Coat. Technol., 2000, 123, 239-246.
- (2000) Surf. Coat. Technol. , vol.123 , pp. 239-246
- Blazdell, P.F.¹ Kuroda, S.²

214
- 0035262034
- B. Y. TAY and M. J. EDIRISINGHE: J. Mater. Res., 2001, 16, 373-384.
- (2001) J. Mater. Res. , vol.16 , pp. 373-384
- Tay, B.Y.¹ Edirisinghe, M.J.²

215
- 0030680827
- Proc. Inst. Mech. Eng. B
- Q. F. XIANG, J. R. G. EVANS, M. J. EDIRISINGHE and P. F. BLAZDELL: Proc. Inst. Mech. Eng. B, J. Eng. Manuf., 1997, 211B, 211-214.
- (1997) J. Eng. Manuf. , vol.211 B , pp. 211-214
- Xiang, Q.F.¹ Evans, J.R.G.² Edirisinghe, M.J.³ Blazdell, P.F.⁴

216
- 0032655856
- M. MOTT, J. H. SONG and J. R. G. EVANS: J. Am. Ceram. Soc., 1999, 82, 1653-1658.
- (1999) J. Am. Ceram. Soc. , vol.82 , pp. 1653-1658
- Mott, M.¹ Song, J.H.² Evans, J.R.G.³

217
- 0032314503
- S. BIEHL, R. DANZEBRINK, P. OLIVEIRA and M. A. AEGERTER: J. Sol-Gel Sci. Technol., 1998, 13, 177-182.
- (1998) J. Sol-gel Sci. Technol. , vol.13 , pp. 177-182
- Biehl, S.¹ Danzebrink, R.² Oliveira, P.³ Aegerter, M.A.⁴

218
- 0032178196
- C. E. SLADE and J. R. G. EVANS: J. Mater. Sci. Lett., 1998, 17, 1669-1671.
- (1998) J. Mater. Sci. Lett. , vol.17 , pp. 1669-1671
- Slade, C.E.¹ Evans, J.R.G.²

219
- 0032650926
- J. WINDLE and B. DERBY: J. Mater. Sci. Lett., 1999, 18, 87-90.
- (1999) J. Mater. Sci. Lett. , vol.18 , pp. 87-90
- Windle, J.¹ Derby, B.²

220
- 0032639308
- M. J. WRIGHT and J. R. G. EVANS: J. Mater. Sci. Lett., 1999, 18, 99-101.
- (1999) J. Mater. Sci. Lett. , vol.18 , pp. 99-101
- Wright, M.J.¹ Evans, J.R.G.²

221
- 0002796104
- B. A. GLOWACKI: Supercond. Sci. Technol., 2000,13, 1-8.
- (2000) Supercond. Sci. Technol. , vol.13 , pp. 1-8
- Glowacki, B.A.¹

222
- 0040077832
- M. M. MOHEBI and J. R. G. EVANS: J. Combinator. Chem., 2002, 4, 267-274.
- (2002) J. Combinator. Chem. , vol.4 , pp. 267-274
- Mohebi, M.M.¹ Evans, J.R.G.²

223
- 0035501875
- J. R. G. EVANS, M. J. EDIRISINGHE, P. V. COVENEY and J. EAMES: J. Euro. Ceram. Soc., 2001, 21, 2291-2299.
- (2001) J. Euro. Ceram. Soc. , vol.21 , pp. 2291-2299
- Evans, J.R.G.¹ Edirisinghe, M.J.² Coveney, P.V.³ Eames, J.⁴

224
- 0036575798
- G. PERCIN and B. T. K-YAKUB: Rev. Sci. Instr, 2002, 73, 2193-2196.
- (2002) Rev. Sci. Instr , vol.73 , pp. 2193-2196
- Percin, G.¹ K-Yakub, B.T.²

225
- 0029771299
- J. H. SONG and J. R. G. EVANS: J. Rheol., 1996, 40, 131-152.
- (1996) J. Rheol. , vol.40 , pp. 131-152
- Song, J.H.¹ Evans, J.R.G.²

226
- 0036685703
- C. AINSLEY, N. REIS and B. DERBY: J. Mater. Sci., 2002, 37, 3155-3161.
- (2002) J. Mater. Sci. , vol.37 , pp. 3155-3161
- Ainsley, C.¹ Reis, N.² Derby, B.³

227
- 0034445312
- Solid freeform and additive fabrication 2000, Warrendale, PA, Materials Research Society
- N. REIS and B. DERBY: in 'Solid freeform and additive fabrication 2000', MRS Symp. Proc. 625, 117-122; 2000, Warrendale, PA, Materials Research Society.
- (2000) MRS Symp. Proc. , vol.625 , pp. 117-122
- Reis, N.¹ Derby, B.²

228
- 0035526577
- K. A. M. SEERDEN, N. REIS, I. R. G. EVANS, P. S. GRANT, J. W. HALLORAN and B. DERBY: J. Am. Ceram. Soc., 2001, 84, 2514-2520.
- (2001) J. Am. Ceram. Soc. , vol.84 , pp. 2514-2520
- Seerden, K.A.M.¹ Reis, N.² Evans, I.R.G.³ Grant, P.S.⁴ Halloran, J.W.⁵ Derby, B.⁶

229
- 0032592462
- Solid freeform and additive fabrication, Warrendale, PA, Materials Research Society
- K. A. M. SEERDEN, N. REIS, B. DERBY, P. S. GRANT, J. W. HALLORAN and J. R. G. EVANS: in 'Solid freeform and additive fabrication', MRS Symp. Proc. 542, 141-146; 1999, Warrendale, PA, Materials Research Society.
- (1999) MRS Symp. Proc. , vol.542 , pp. 141-146
- Seerden, K.A.M.¹ Reis, N.² Derby, B.³ Grant, P.S.⁴ Halloran, J.W.⁵ Evans, J.R.G.⁶

230
- 0032592457
- Solid freeform and additive fabrication, Warrendale, PA, Materials Research Society
- N. REIS, K. A. M. SEERDEN, B. DERBY, J. W. HALLORAN and J. R. G. EVANS: in 'Solid freeform and additive fabrication', MRS Symp. Proc. 542, 147-152; 1999, Warrendale, PA, Materials Research Society.
- (1999) MRS Symp. Proc. , vol.542 , pp. 147-152
- Reis, N.¹ Seerden, K.A.M.² Derby, B.³ Halloran, J.W.⁴ Evans, J.R.G.⁵

231
- 0034771981
- C. AINSLEY, N. REIS and B. DERBY: Key Eng. Mater., 2002, 206, 297-300.
- (2002) Key Eng. Mater. , vol.206 , pp. 297-300
- Ainsley, C.¹ Reis, N.² Derby, B.³

232
- 0032766612
- W. ZHANG, M. C. LEU, Z. M. JI and Y. N. YAN: Mater. Des., 1999, 20, 139-145.
- (1999) Mater. Des. , vol.20 , pp. 139-145
- Zhang, W.¹ Leu, M.C.² Ji, Z.M.³ Yan, Y.N.⁴

233
- 0033355704
- G. THORNELL, L. KLINTBER, T. LAURELL, J. NILSSON and S. JOHANSSON: J. Micromech. Microeng., 1999, 9, 434-437.
- (1999) J. Micromech. Microeng. , vol.9 , pp. 434-437
- Thornell, G.¹ Klintber, L.² Laurell, T.³ Nilsson, J.⁴ Johansson, S.⁵

234
- 0036538811
- H. M. NUR, J. H. SONG, J. R. G. EVANS and M. J. EDIRISINGHE: J. Mater. Sci., Mater. Electron., 2002, 13, 213-219.
- (2002) J. Mater. Sci., Mater. Electron. , vol.13 , pp. 213-219
- Nur, H.M.¹ Song, J.H.² Evans, J.R.G.³ Edirisinghe, M.J.⁴

235
- 0035388328
- A. R. BHATTI, M. MOTT, J. R. G. EVANS and M. J. EDIRISINGHE: J. Mater. Sci. Lett., 2001, 20, 1245-1248.
- (2001) J. Mater. Sci. Lett. , vol.20 , pp. 1245-1248
- Bhatti, A.R.¹ Mott, M.² Evans, J.R.G.³ Edirisinghe, M.J.⁴

236
- 0035250308
- M. MOTT and J. R. G. EVANS: J. Am. Ceram. Soc., 2001, 84, 307-313.
- (2001) J. Am. Ceram. Soc. , vol.84 , pp. 307-313
- Mott, M.¹ Evans, J.R.G.²

237
- 0037094361
- X. ZHAO, J. R. G. EVANS, M. J. EDIRISINGHE and J. H. SONG: J. Mater. Sci., 2002, 37, 1987-1992.
- (2002) J. Mater. Sci. , vol.37 , pp. 1987-1992
- Zhao, X.¹ Evans, J.R.G.² Edirisinghe, M.J.³ Song, J.H.⁴

238
- 0036687436
- X. ZHAO, J. R. G. EVANS, M. J. EDIRISINGHE and J. H. SONG: J. Am. Ceram. Soc., 2002, 85, 2113-2115.
- (2002) J. Am. Ceram. Soc. , vol.85 , pp. 2113-2115
- Zhao, X.¹ Evans, J.R.G.² Edirisinghe, M.J.³ Song, J.H.⁴

239
- 0035526129
- X. ZHAO, J. R. G. EVANS, M. J. EDIRISINGHE and J. H. SONG: J. Mater. Synth. Process., 2001, 9, 319-327.
- (2001) J. Mater. Synth. Process. , vol.9 , pp. 319-327
- Zhao, X.¹ Evans, J.R.G.² Edirisinghe, M.J.³ Song, J.H.⁴

240
- 8844226147
- ed. R. H. Leach et al., Dordrecht, Kluwer Academic
- A. HUDD: in The printing ink manual', 5th edn, (ed. R. H. Leach et al.), 678-698; 1999, Dordrecht, Kluwer Academic.
- (1999) 'The Printing Ink Manual', 5th Edn , pp. 678-698
- Hudd, A.¹

241
- 0347459394
- US Patent 5076843, 31 Dec. 1991 (assigned to Lexmark Inc.)
- M. A. ACITELLI, C. J. MERZ, F. M. ROSE and J. C. SMITH: US Patent 5076843, 31 Dec. 1991 (assigned to Lexmark Inc.).
- Acitelli, M.A.¹ Merz, C.J.² Rose, F.M.³ Smith, J.C.⁴

242
- 0346828650
- ed. R. H. Leach et al., Dordrecht, Kluwer Academic
- R. H. LEACH and R. J. PIERCE: in The printing ink manual', 5th edn, (ed. R. H. Leach et al.), 1-13; 1999, Dordrecht, Kluwer Academic.
- (1999) 'The Printing Ink Manual', 5th Edn , pp. 1-13
- Leach, R.H.¹ Pierce, R.J.²

243
- 0346828649
- ed. R. H. Leach et al., Dordrecht, Kluwer Academic
- I. HARGREAVES: in The printing ink manual', 5th edn, (ed. R. H. Leach et al.), 636-677; 1999, Dordrecht, Kluwer Academic.
- (1999) 'The Printing Ink Manual', 5th Edn , pp. 636-677
- Hargreaves, I.¹

244
- 0347459393
- ed. R. H. Leach et al., London, Van Nostrand Reinhold
- R. MARSH: in The printing ink manual', 4th edn, (ed. R. H. Leach et al.), 687; 1988, London, Van Nostrand Reinhold.
- (1988) 'The Printing Ink Manual', 4th Edn , pp. 687
- Marsh, R.¹

245
- 0021422097
- J. E. FROMM: IBM J. Res. Dev., 1984, 28, 322-333.
- (1984) IBM J. Res. Dev. , vol.28 , pp. 322-333
- Fromm, J.E.¹

246
- 0346828648
- B. Y. TAY and M. J. EDIRISINGHE: J. Mater. Sci. Lett., 2002, 21, 213-219.
- (2002) J. Mater. Sci. Lett. , vol.21 , pp. 213-219
- Tay, B.Y.¹ Edirisinghe, M.J.²

247
- 57249088481
- B. Y. TAY and M. J. EDIRISINGHE: Proc. R. Soc. (London) Series A, 2002, 458, 2039-2051.
- (2002) Proc. R. Soc. (London) Series A , vol.458 , pp. 2039-2051
- Tay, B.Y.¹ Edirisinghe, M.J.²

248
- 0017572912
- W. L. BUEHNER, J. D. HILL, T. H. WILLIAMS and J. W. WOODS: IBM J. Res. Dev., 1977, 21, 2-9.
- (1977) IBM J. Res. Dev. , vol.21 , pp. 2-9
- Buehner, W.L.¹ Hill, J.D.² Williams, T.H.³ Woods, J.W.⁴

249
- 0033733117
- H. RASHID, B. Y. TAY and M. J. EDIRISINGHE: J. Mater. Sci. Lett., 2000, 19, 799-801.
- (2000) J. Mater. Sci. Lett. , vol.19 , pp. 799-801
- Rashid, H.¹ Tay, B.Y.² Edirisinghe, M.J.³

250
- 0033722279
- B. Y. TAY, H. RASHID and M. J. EDIRISINGHE: J. Mater. Sci. Lett., 2000, 19, 1151-1154.
- (2000) J. Mater. Sci. Lett. , vol.19 , pp. 1151-1154
- Tay, B.Y.¹ Rashid, H.² Edirisinghe, M.J.³

251
- 0031076681
- W. D. TENG, M. J. EDIRISINGHE and J. R. O. EVANS: J. Am. Ceram. Soc., 1997, 80, 486-494.
- (1997) J. Am. Ceram. Soc. , vol.80 , pp. 486-494
- Teng, W.D.¹ Edirisinghe, M.J.² Evans, J.R.O.³

252
- 0025477937
- E. JORGE, T. CHARTIER and P. BOCK: J. Am. Ceram. Soc., 1990, 73, 2552-2554.
- (1990) J. Am. Ceram. Soc. , vol.73 , pp. 2552-2554
- Jorge, E.¹ Chartier, T.² Bock, P.³

253
- 0027875856
- K. HIGASHITANI, K. YOSHIDA, N. TANISE and H. MURATA: Colloid Surf. A. Physiochem. Eng., 1993, 81, 167-175.
- (1993) Colloid Surf. A. Physiochem. Eng. , vol.81 , pp. 167-175
- Higashitani, K.¹ Yoshida, K.² Tanise, N.³ Murata, H.⁴

254
- 0348089404
- to be published
- B. Y. TAY and M. J. EDIRISINGHE: to be published.
- Tay, B.Y.¹ Edirisinghe, M.J.²

255
- 0347459392
- W. D. TENG and M. J. EDIRISINGHE: Br. Ceram. Trans., 1998, 97, 109-173.
- (1998) Br. Ceram. Trans. , vol.97 , pp. 109-173
- Teng, W.D.¹ Edirisinghe, M.J.²

256
- 0028462597
- M. E. R. SHANNAHAN and C. BOURGES: Int. J. Adhes. Adhes., 1994, 14, 201-205.
- (1994) Int. J. Adhes. Adhes. , vol.14 , pp. 201-205
- Shannahan, M.E.R.¹ Bourges, C.²

257
- 0002980595
- ed. K. L. Mittal, Utrecht, VSP
- K. S. BIRDI and D. T. VU: in 'Contact angle, wettability and adhesion', (ed. K. L. Mittal), 285-293; 1993, Utrecht, VSP.
- (1993) Contact Angle, Wettability and Adhesion , pp. 285-293
- Birdi, K.S.¹ Vu, D.T.²

258
- 0030192637
- F. PARISEE and C. ALLAIN: J. Phys. II (France), 1996, 6, 1111-1119.
- (1996) J. Phys. II (France) , vol.6 , pp. 1111-1119
- Parisee, F.¹ Allain, C.²

259
- 0031561076
- F. PARISEE and C. ALLAIN: Langmuir, 1997, 13, 3598-3602.
- (1997) Langmuir , vol.13 , pp. 3598-3602
- Parisee, F.¹ Allain, C.²

260
- 0005334506
- W. W. Y. LAU and C. M. BURNS: J. Colloid Interf. Sci., 1973, 45, 295-302.
- (1973) J. Colloid Interf. Sci. , vol.45 , pp. 295-302
- Lau, W.W.Y.¹ Burns, C.M.²

261
- 0033350036
- H. Y. ERBIL: J. Adhes. Sci. Technol., 1999, 13, 1405-1413.
- (1999) J. Adhes. Sci. Technol. , vol.13 , pp. 1405-1413
- Erbil, H.Y.¹

262
- 0024015873
- A. K. RAY, J. LEE and H. L. TILLEY: Langmuir, 1988, 4, 631-637.
- (1988) Langmuir , vol.4 , pp. 631-637
- Ray, A.K.¹ Lee, J.² Tilley, H.L.³

263
- 0030233629
- S. CHANDRA, M. DI MARZO, Y. M. QIAO and P. TARTARINI: Fire Safety J., 1996, 27, 141-158.
- (1996) Fire Safety J. , vol.27 , pp. 141-158
- Chandra, S.¹ Di Marzo, M.² Qiao, Y.M.³ Tartarini, P.⁴

264
- 0033076614
- S. MAENOSONO, C. D. DUSHKIN, S. SAITA and Y. YAMAGUCHI: Langmuir, 1999, 15, 957-965.
- (1999) Langmuir , vol.15 , pp. 957-965
- Maenosono, S.¹ Dushkin, C.D.² Saita, S.³ Yamaguchi, Y.⁴

265
- 0035436213
- Y. SHENGJIE, Y. C. LAM, S. C. M. YU and K. C. TAM: J. Mater. Res., 2001, 16, 2436-2451.
- (2001) J. Mater. Res. , vol.16 , pp. 2436-2451
- Shengjie, Y.¹ Lam, Y.C.² Yu, S.C.M.³ Tam, K.C.⁴

266
- 0030674572
- J. A. LEWIS: Ann. Rev. Mater. Sci., 1997, 27, 147-173.
- (1997) Ann. Rev. Mater. Sci. , vol.27 , pp. 147-173
- Lewis, J.A.¹

267
- 0040446085
- M. J. EDIRISINGHE and J. R. G. EVANS: Int. J. High. Tech. Ceram., 1986, 2, 249-278.
- (1986) Int. J. High. Tech. Ceram. , vol.2 , pp. 249-278
- Edirisinghe, M.J.¹ Evans, J.R.G.²

268
- 0024681102
- S. MASIA, P. D. CALVERT, W. E. RHINE and H. K. BOWEN: J. Mater. Sci., 1989, 24, 1907-1912.
- (1989) J. Mater. Sci. , vol.24 , pp. 1907-1912
- Masia, S.¹ Calvert, P.D.² Rhine, W.E.³ Bowen, H.K.⁴

269
- 0026626806
- M. J. EDIRISINGHE, H. M. SHAW and K. L. TOMKINS: Ceram. Int., 1992, 18, 193-200.
- (1992) Ceram. Int. , vol.18 , pp. 193-200
- Edirisinghe, M.J.¹ Shaw, H.M.² Tomkins, K.L.³

270
- 0027592768
- S. ASHLEY: Mech. Eng., 1993, 115, 50-53.
- (1993) Mech. Eng. , vol.115 , pp. 50-53
- Ashley, S.¹

271
- 0033777846
- P. A. WEBB: J. Med. Eng. Technol., 2000, 24, 149-153.
- (2000) J. Med. Eng. Technol. , vol.24 , pp. 149-153
- Webb, P.A.¹

272
- 14344277349
- J. VANDER SLOTEN, R. VAN AUDEKERCKE and G. VAN DER PERRE: Ind. Ceram., 2000, 20, 109-112.
- (2000) Ind. Ceram. , vol.20 , pp. 109-112
- Sloten, J.V.¹ Van Audekercke, R.² Van Der Perre, G.³

273
- 0028274854
- R. A. LEVY, S. GODVRI and R. H. CRAWFORD: Am. J. Neuroradiol., 1994, 15, 473-477.
- (1994) Am. J. Neuroradiol. , vol.15 , pp. 473-477
- Levy, R.A.¹ Godvri, S.² Crawford, R.H.³

274
- 0033998729
- P. S. D'URSO, W. J. EARWAKER, T. M. BARKER, M. J. REDMOND, R. G. THOMPSON, D. J. EFFENEY and F. H. TOMLINSON: Br. J. Plast. Surg., 2000, 53, 200-204.
- (2000) Br. J. Plast. Surg. , vol.53 , pp. 200-204
- D'Urso, P.S.¹ Earwaker, W.J.² Barker, T.M.³ Redmond, M.J.⁴ Thompson, R.G.⁵ Effeney, D.J.⁶ Tomlinson, F.H.⁷

275
- 0031545915
- R. A. LEVY, T. M. G. CHU, J. W. HALLORAN, S. E. FEINBERG and S. HOLLISTER: Am. J. Neuroradiol., 1997, 18, 1522-1525.
- (1997) Am. J. Neuroradiol. , vol.18 , pp. 1522-1525
- Levy, R.A.¹ Chu, T.M.G.² Halloran, J.W.³ Feinberg, S.E.⁴ Hollister, S.⁵

276
- 0033181210
- R. PETZOLD, H. F. ZEILHOFER and W. A. KALENDER: Comput. Med. Imag. Graph., 1999, 23, 277-284.
- (1999) Comput. Med. Imag. Graph. , vol.23 , pp. 277-284
- Petzold, R.¹ Zeilhofer, H.F.² Kalender, W.A.³

277
- 0032618790
- T. J. COWARD, R. M. WATSON and I. C. WILKINSON: Int. J. Prosthodont., 1999, 12, 20-27.
- (1999) Int. J. Prosthodont. , vol.12 , pp. 20-27
- Coward, T.J.¹ Watson, R.M.² Wilkinson, I.C.³

278
- 0034487160
- Proc. Inst. Mech. Eng. H
- R. BIBB, P. FREEMAN, R. BROWN, A. SUGAR, P. EVANS and A. BOCCA: Proc. Inst. Mech. Eng. H, J. Eng. Med., 2000, 214, 589-594.
- (2000) J. Eng. Med. , vol.214 , pp. 589-594
- Bibb, R.¹ Freeman, P.² Brown, R.³ Sugar, A.⁴ Evans, P.⁵ Bocca, A.⁶

279
- 0035870103
- B. BORAH, G. J. GROSS, T. E. DUFRESNE, T. S. SMITH, M. D. COCKMAN, P. A. CHMIELEWSKI, M. W. LUNDY, J. R. HARTKE and E. W. SOD: Anatom. Rec., 2001, 265, 101-110.
- (2001) Anatom. Rec. , vol.265 , pp. 101-110
- Borah, B.¹ Gross, G.J.² Dufresne, T.E.³ Smith, T.S.⁴ Cockman, M.D.⁵ Chmielewski, P.A.⁶ Lundy, M.W.⁷ Hartke, J.R.⁸ Sod, E.W.⁹

280
- 0028236592
- J. C. ANDREWS, N. J. MANKOVICH, Y. ANZAI and R. B. LUFKIN: Am. J. Otol., 1994, 15, 335-339.
- (1994) Am. J. Otol. , vol.15 , pp. 335-339
- Andrews, J.C.¹ Mankovich, N.J.² Anzai, Y.³ Lufkin, R.B.⁴

281
- 0026516508
- N. G. STOKER, N. J. MANKOVICH and D. VALENTINO: J. Oral Maxillofacial Surg., 1992, 50, 466-471.
- (1992) J. Oral Maxillofacial Surg. , vol.50 , pp. 466-471
- Stoker, N.G.¹ Mankovich, N.J.² Valentino, D.³

282
- 0034583695
- I. ONO, K. ABE, S. SHIOTANI and Y. HIRAYAMA: J. Croniofacial Surg., 2000, 11, 527-537.
- (2000) J. Croniofacial Surg. , vol.11 , pp. 527-537
- Ono, I.¹ Abe, K.² Shiotani, S.³ Hirayama, Y.⁴

283
- 0030982950
- E. BERRY, J. M. BROWN, M. CONNELL, C. M. CRAVEN, N. D. EFFORD, A. RADJENOVIC and M. A. SMITH: Med. Eng. Phys., 1997, 19, 90-96.
- (1997) Med. Eng. Phys. , vol.19 , pp. 90-96
- Berry, E.¹ Brown, J.M.² Connell, M.³ Craven, C.M.⁴ Efford, N.D.⁵ Radjenovic, A.⁶ Smith, M.A.⁷

284
- 0035381222
- S. J. LEE, I. Y. JUNG, C. Y. LEE, S. Y. CHOI and K. Y. RUM: Dental Traumatol., 2001, 17, 114-119.
- (2001) Dental Traumatol. , vol.17 , pp. 114-119
- Lee, S.J.¹ Jung, I.Y.² Lee, C.Y.³ Choi, S.Y.⁴ Rum, K.Y.⁵

285
- 0041314785
- ed. A. J. Lightman et al., Dayton, OH, University of Dayton
- A. GRIFFIN, S. MCMILLIN, C. GRIFFIN and K. BARTON: Proc. 7th Int. Conf. on 'Rapid prototyping', (ed. A. J. Lightman et al.), 355-359; 1997, Dayton, OH, University of Dayton.
- (1997) Proc. 7th Int. Conf. on 'Rapid Prototyping' , pp. 355-359
- Griffin, A.¹ McMillin, S.² Griffin, C.³ Barton, K.⁴

286
- 0035885555
- N. L. PORTER, R. M. PILLIAR and M. D. GRYNPAS: J. Biomed. Mater. Res., 2001, 56, 504-515.
- (2001) J. Biomed. Mater. Res. , vol.56 , pp. 504-515
- Porter, N.L.¹ Pilliar, R.M.² Grynpas, M.D.³

287
- 0032803201
- N. K. VAIL, L. D. SWAIN, W. C. FOX, T. B. AUFDLEMORTE, G. LEE and J. W. BARLOW: Mater. Des., 1999, 20, 123-132.
- (1999) Mater. Des. , vol.20 , pp. 123-132
- Vail, N.K.¹ Swain, L.D.² Fox, W.C.³ Aufdlemorte, T.B.⁴ Lee, G.⁵ Barlow, J.W.⁶

288
- 0002813324
- ed. K. A. Khor et al., Singapore, World Science
- D. W. HUTMACHER, I. ZEIN and S. H. TEOH: in 'Processing and fabrication of advanced materials VIII', (ed. K. A. Khor et al.), 201-206; 2000, Singapore, World Science.
- (2000) Processing and Fabrication of Advanced Materials VIII , pp. 201-206
- Hutmacher, D.W.¹ Zein, I.² Teoh, S.H.³

289
- 0037082740
- I. ZEIN, D. W. HUTMACHER, K. C. TAN and S. H. TEOH: Biomaterials, 2002, 23, 1169-1185.
- (2002) Biomaterials , vol.23 , pp. 1169-1185
- Zein, I.¹ Hutmacher, D.W.² Tan, K.C.³ Teoh, S.H.⁴

290
- 0035094757
- D. W. HUTMACHER, T. SCHANTZ, I. ZEIN, K. W. NG, S. H. TEOH and K. C. TAN: J. Biomed. Mater. Res., 2001, 55, 203-216.
- (2001) J. Biomed. Mater. Res. , vol.55 , pp. 203-216
- Hutmacher, D.W.¹ Schantz, T.² Zein, I.³ Ng, K.W.⁴ Teoh, S.H.⁵ Tan, K.C.⁶

291
- 0035840815
- Z. XIONG, Y. N. YAN, R. J. ZHANG and L. SUN: Scr. Mater., 2001, 45, 773-779.
- (2001) Scr. Mater. , vol.45 , pp. 773-779
- Xiong, Z.¹ Yan, Y.N.² Zhang, R.J.³ Sun, L.⁴

292
- 0037385506
- I. GRIDA and J. R. G. EVANS: J. Euro. Ceram. Soc., 2003, 23, 629-635.
- (2003) J. Euro. Ceram. Soc. , vol.23 , pp. 629-635
- Grida, I.¹ Evans, J.R.G.²

293
- 0037352762
- F. C. GOMES DE SOUSA and J. R. G. EVANS: J. Am. Ceram. Soc., 2003, 86, 517-519.
- (2003) J. Am. Ceram. Soc. , vol.86 , pp. 517-519
- De Sousa, F.C.G.¹ Evans, J.R.G.²

294
- 0035089666
- M. C. MELICAN, M. C. ZIMMERMAN, M. S. DHILLON, A. R. PONNAMBALAM, A. CURODEAU and J. R. PARSONS: J. Biomed. Mater. Res., 2001, 55, 194-202.
- (2001) J. Biomed. Mater. Res. , vol.55 , pp. 194-202
- Melican, M.C.¹ Zimmerman, M.C.² Dhillon, M.S.³ Ponnambalam, A.R.⁴ Curodeau, A.⁵ Parsons, J.R.⁶

295
- 0029231059
- R. IPPOLITO, L. LULIANO and A. GATTO: CIRP Ann., 1995, 44, 157-160.
- (1995) CIRP Ann. , vol.44 , pp. 157-160
- Ippolito, R.¹ Luliano, L.² Gatto, A.³

296
- 0030216726
- B. K. PAUL and S. BASKARAN: J. Mater. Process. Technol., 1996, 61, 168-172.
- (1996) J. Mater. Process. Technol. , vol.61 , pp. 168-172
- Paul, B.K.¹ Baskaran, S.²

297
- 0034227035
- W. M. SIGMUND, N. S. BELL and L. BERGSTRÖM: J. Am. Ceram. Soc., 2000, 83, 1557-1574.
- (2000) J. Am. Ceram. Soc. , vol.83 , pp. 1557-1574
- Sigmund, W.M.¹ Bell, N.S.² Bergström, L.³

298
- 0034627932
- Z. W. ZHAO and L. LAPERRIERE: Int. J. Prod. Res., 2000, 38, 69-83.
- (2000) Int. J. Prod. Res. , vol.38 , pp. 69-83
- Zhao, Z.W.¹ Laperriere, L.²

299
- 0036026411
- S. N. JAYASINGHE, M. J. EDIRISINGHE and T. DE WILDE:. J. Mater. Res. Innovat., 2002, 6, 92-95.
- (2002) J. Mater. Res. Innovat. , vol.6 , pp. 92-95
- Jayasinghe, S.N.¹ Edirisinghe, M.J.² De Wilde, T.³

300
- 0346828647
- S. N. JAYASINGHE and M. J. EDIRISINGHE: J. Mater. Res. Innovat., 2003, 7, 62-64.
- (2003) J. Mater. Res. Innovat. , vol.7 , pp. 62-64
- Jayasinghe, S.N.¹ Edirisinghe, M.J.²

301
- 0030111540
- A. J. MESTEL: J. Fluid Mech., 1996, 312, 311-326.
- (1996) J. Fluid Mech. , vol.312 , pp. 311-326
- Mestel, A.J.¹

302
- 0025497368
- M. CLOUPEAU and B. PRUNET-FOCH: J. Electrostat., 1990, 25, 165-184.
- (1990) J. Electrostat. , vol.25 , pp. 165-184
- Cloupeau, M.¹ Prunet-Foch, B.²

303
- 0033180995
- C. H. CHEN, M. H. J. EDMOND, E. M. KELDER, B. MEESTER and J. SCHOONMAN: J. Aerosol Sci., 1999, 30, 959-969.
- (1999) J. Aerosol Sci. , vol.30 , pp. 959-969
- Chen, C.H.¹ Edmond, M.H.J.² Kelder, E.M.³ Meester, B.⁴ Schoonman, J.⁵

304
- 0031162628
- W. D. TENG, Z. A. HUNEITI, W. MACHOWSKI, J. R. G. EVANS, M. J. EDIRISINGHE and W. BALACHANDRAN: J. Mater. Sci. Lett., 1997, 16, 1017-1019.
- (1997) J. Mater. Sci. Lett. , vol.16 , pp. 1017-1019
- Teng, W.D.¹ Huneiti, Z.A.² Machowski, W.³ Evans, J.R.G.⁴ Edirisinghe, M.J.⁵ Balachandran, W.⁶

305
- 0036790914
- S. N. JAYASINGHE and M. J. EDIRISINGHE: J. Aerosol. Sci., 2002, 33, 1379-1388.
- (2002) J. Aerosol. Sci. , vol.33 , pp. 1379-1388
- Jayasinghe, S.N.¹ Edirisinghe, M.J.²

306
- 0034604044
- H. FAN, Y. LU, A. STUMP, S. T. REED, T. BAER, R. SCHUNK, V. PEREZ-LUNA, G. P. LOFEZ and C. J. BRINKER: Nature, 2000, 405, 56-60.
- (2000) Nature , vol.405 , pp. 56-60
- Fan, H.¹ Lu, Y.² Stump, A.³ Reed, S.T.⁴ Baer, T.⁵ Schunk, R.⁶ Perez-Luna, V.⁷ Lofez, G.P.⁸ Brinker, C.J.⁹

307
- 0035361631
- H. Y. FAN, S. REED, T. BAER, R. SCHUNK, G. P. LOPEZ and C. J. BRINKER: Micropor. Mesopor. Mater., 2001, 44, 625-637.
- (2001) Micropor. Mesopor. Mater. , vol.44 , pp. 625-637
- Fan, H.Y.¹ Reed, S.² Baer, T.³ Schunk, R.⁴ Lopez, G.P.⁵ Brinker, C.J.⁶

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.