Growth structures and phase formation in industrially room-temperature pulsed laser deposited FCC Ti-based nitride coatings

Materials Science Forum

Volumn 513, Issue , 2006, Pages 85-104

  Lackner, J M ^a  

^a JOANNEUM RESEARCH   (Austria)

Author keywords

Hardness; Laser ablation; Microstructure; Room temperature pulsed laser deposition; Solid solution hardening; Titanium nitride; Titanium aluminum carbonitride; Titanium alumnium nitride

Indexed keywords

GROWTH (MATERIALS); HARDNESS; LASER ABLATION; MICROSTRUCTURE; PULSED LASER DEPOSITION; TITANIUM NITRIDE;

ROOM-TEMPERATURE PULSED LASER DEPOSITION; SOLID-SOLUTION-HARDENING; TITANIUM-ALUMINUM CARBONITRIDE; TITANIUM-ALUMNIUM NITRIDE;

COATINGS;

EID: 33751241263     PISSN: 02555476     EISSN: 16629752     Source Type: Book Series    
DOI: 10.4028/0-87849-400-6.85     Document Type: Conference Paper

References (78)

1. R.F. Bunshah: Handbook of Hard Coatings (Noyes Publ., Park Ridge, N.J., 2000).
2. J.P. Bars, E. Etchessahar, J. Debuigne: J. Less-Common Metals Vol. 52 (1997) p. 51.
3. D.B. Chrisey, G.K. Hubler (Eds.): Pulsed Laser Deposition of Thin Films (Wiley, New York, 1994).
4. J.M. Lackner: Innovative Coating by Pulsed Laser Deposition (PhD thesis, University of Leoben, Austria, 2003).
5. J.M. Lackner, W. Waldhauser, R. Ebner, B. Major, T. Schöberl: Thin Solid Films Vol. 181C (2004) p. 585.
6. J.M. Lackner, W. Waldhauser, R. Ebner, C. Stotter, G. Jakopic, T. Schöberl: BHM 149 (2004) p. 118.
7. L.E. Toth: Refractory Materials (vol. 7, Academic Press, New York, 1971).
8. F.J. Teeter: in Ceramic Coatings (vol. 44, ASME, New York, 1993, p. 87).
9. K. Holmberg, A. Matthews: Coatings Tribology (Elsevier, Amsterdam, 1994).
10. E. Ertuerk, O. Knotek,W. Bergmer, H.-G. Prengel: Surf. Coat. Technol. Vol. 46 (1991) p. 39.
11. E. Bergmann, H. Kaufmann, R. Schmid, J. Vogel: Surf. Coat. Technol. Vol. 42 (1990) p. 237.
12. S. PalDey, S.C. Deevi: Mater. Sci. Eng. A Vol. 342 (2003) p. 58.
13. B. Navinsek: Mater. Manuf. Process. Vol. 7 (1992) p. 63.
14. W.D. Sproul: J. Vac. Sci. Technol. A Vol. 12 (1994) p. 1595.
15. K. Narasimhan, S. Prasad, D. Bhat: Wear Vol. 188 (1995) p. 123.
16. J. Deng, M. Braun: Surf. Coat. Technol. Vol. 70 (1994) p. 49.
17. H.K. Tonshoff, C. Blawit: Surf. Coat. Technol. Vol. 93 (1997) p. 119.
18. T. Lyman, H.E. Boyer, W.J. Carnes, M.W. Chevalier: Metals Handbook, Vol. 8, Metallography, Structures and Phase Diagrams (ASM International, Materials Park, Ohio, 1973).
19. J.C. Schuster, J. Baure: J. Solid State Chem. Vol. 53 (1984) p. 260.
20. J.M. Lackner, W. Waldhauser, R. Ebner, W. Lenz, W. Mroz: Galvanotechnik Vol. 5 (2003) p. 1226.
21. J.M. Lackner: Large-area high-rate Pulsed Laser Deposition - Principles, Applications and Potentialities in Industrial Coating, Surf. Coat. Technol. (2005) (in preparation).
22. R. Ebner, W. Waldhauser, W. Lenz: Pulsed Laser Deposition: A new Technique for Coating Sheet Materials and three-dimensional industrial Components (Proc. Materials Week 2001, Munich).
23. J.M. Lackner: (in preparation).
24. J.A. Thornton: Ann. Rev. Mater. Sci. Vol. 7 (1977) p. 239.
25. B.A. Movchan, A.V. Demchisin: Phys. Metals Metallogr. Vol. 28 (1969) p. 83.
26. J.A. Thornton: J. Vac. Sci. Technol. Vol. 11 (1974) p. 666.
27. R. Messier, A.P. Giri, R.A. Roy: J. Vac. Sci. Technol. A Vol. 2 (1984) p. 500.
28. J.A. Thornton: J. Vac. Sci. Technol. Vol. 12 (1975) p. 830.
29. W. Ensinger: Nucl. Instr. Meth. Phys. Res. B Vol. 127/128 (1997) p. 796.
30. P. Haasen: Physical Metallurgy (Cambridge University Press, London, UK, 1978).
31. C.S. Barrett, T.B. Massalski: Structure of Metals (Pergamon Press, Oxford, 1980).
32. J.E. Greene: in D.T.J. Hurle (Ed.), Handbook of Crystal Growth, Vol. 1 (Elsevier Science Publishers, Amsterdam, 1993, pp. 640).
33. W. Schatt, H. Worch (Eds.), Werkstoffwissenschaft (Deutscher Verlag für Grundstoffindustrie, Stuttgart, 1996).
34. F.A. Smidt, Int. Mat. Reviews Vol. 35 (1990) p. 61.
35. R. Roy, Surf. Coat. Technol. Vol. 51 (1992) p. 203.
36. D.M. Mattox: J. Vac. Sci. Technol. A Vol. 7 (1989) p. 1105.
37. nd Edition; Springer; Berlin, 1998, p. 228).
38. A.D. Akhsakhalyan, B.A. Biryutin, S.V. Gaponov, A.A. Gudkov, V.I. Luchin: Sov. Phys.-Techn. Phys. Vol. 27 (1982) p. 969.
39. A.D. Akhsakhalyan, B.A. Biryutin, S.V. Gaponov, A.A. Gudkov, V.I. Luchin: Sov. Phys.-Techn. Phys. Vol. 27 (1982) p. 973.
40. J.M. Lackner, W. Waldhauser, R. Ebner, W. Lenz, B. Major, T. Schöberl: Praktische Metallographie Sonderband Vol. 34 (2003) p. 291.
41. J.M. Lackner, W. Waldhauser, R. Ebner, J. Keckes, T. Schöberl: Surf. Coat. Techn. 177-178 (2004) p. 447.
42. B. Major, W. Mroz, T. Wierzchon, W. Waldhauser, J.M. Lackner, R. Ebner: Surf. Coat. Techn. Vol. 180-181 (2004) p. 580.
43. x und Ti PLD-Schichten (Diploma Thesis, University of Leoben, Leoben, 1997).
44. K.T.-Y. Kung, R. Reif: J. Appl. Phys. Vol. 59 (1986) p. 2422.
45. P. Huber, D. Manova, S. Mandl, B. Rauschenbach: Surf. Coat. Technol. Vol. 156 (2002) p. 176.
46. C. Kooy, J.M. Nieuwenhuizen, in: R. Niedermayer, H. Mayer: Basic Problems in Thin Film Physics (Vandenhoeck and Ruprecht, Göttingen, 1966, p. 181).
47. J.F. Ziegler, J.P. Biersack: SRIM - The Stopping and Range of Ions in Matter (Software-Version 2003.20, 2003).
48. A. Van der Drift: Philips Res. Rep. Vol. 22 (1967) p. 267.
49. L. Hultman, W.-D. Münz, J. Musil, K. Kadlec, I. Petrov, J.E. Greene: J. Vac. Sci. Technol. A Vol. 9 (1991) p. 434.
50. N. Sonnenberg, A.S. Longo, J.M. Cim, P.B. Chang, K.G. Ressler, P.C. McIntyre, Y.P. Liu: J. Appl. Phys. Vol. 74 (1993) p. 1027.
51. G. Knuyt, C. Quaeyhaegens, J. D'Haen, L.M. Stals: Thin Solid Films Vol. 258 (1995 p. 159.
52. G. Knuyt, C. Quaeyhaegens, J. D'Haen, L.M. Stals: Surf. Coat. Technol. Vol. 76-77 (1995) p. 311.
53. H. Ljungcrantz, L. Hultman, J.-E. Sundgren, L. Karlsson: J. Appl. Phys. Vol. 78 (1995) p. 832.
54. J.-H. Huang, Y.-P. Tsai, G.-P. Yu: Thin Solid Films Vol. 355-356 (1999) p. 440.
55. Y.M. Chen, G.P. Yu, J.-H. Huang: Surf. Coat. Techn. Vol. 141 (2001) p. 156
56. M.I. Jones, I.R. McColl, D.M. Grant: Surf. Coat. Technol. Vol. 132 (2000) p. 143.
57. H. Lüth: Surfaces and Interfaces of Solid Materials (Springer Vg., Berlin, 1995).
58. I. Petrov, L. Hultman, U. Helmersson, J.-E. Sundgren, J.E. Greene: Thin Solid Films Vol. 169 (1989) p. 299.
59. J. Pelleg, L.Z. Zevin, S. Lungo: Thin Solid Films Vol. 197 (1991) p. 117.
60. U.C. Oh, J.H. Je: J. Appl. Phys. Vol. 74 (1993) p. 1692.
61. H. Kheyrandish, J.S. Colligon, J.-K. Kim: J. Vac. Sci. Techn. A Vol. 12 (1995) p. 2723.
62. Powder Diffraction File from JCPDF International Center for Diffraction Data; Swarthmore; 1992.
63. B. Rother, J. Vetter: Plasmabeschichtungsverfahren und Hartstoffschichten (Deutsche Vg. für Grundstoffindustrie, 1992).
64. G. Gottstein: Physical Foundation of Materials Science (Springer Vg., 2004).
65. R.W. Siegel: Mater. Sci. Forum Vol. 235-238 (1997) p. 851.
66. V. Sedlacek: Metallic Surfaces, Films and Coatings (Elsevier, Amsterdam, 1992).
67. D.S. Rickerby, B.A. Bellamy, A.M. Jones: Surf. Engin. Vol. 3 (1987) p. 138.
68. D.S. Rickerby, G. Eckold, K.T. Scott, I.M. Buckley-Golder: Thin Solid Films Vol. 154 (1987) p. 125.
69. D.S. Rickerby: A.M. Jones, B.A. Bellamy: Surf. Coat. Technol. Vol. 37 (1989) p. 111.
70. H. Windischmann: J. Appl. Phys. 62 (1987) p. 1800.
71. H. Holleck: J. Vac. Sci. Technol. A 4 (1986) p. 2661.
72. A. Kimura, h. Hasegawa, K. Yamada, T. Suzuki: J. Mater. Sci. Lett. Vol. 19 (2000) p. 601.
73. T. Ikeda, H. Satoh: Thin Solid Films 195 (1991) p. 99.
74. M. Zhou, Y. makino, M. Nose, K. Nogi: Thin Solid Films Vol. 339 (1999) p. 203.
75. J.M. Lackner, W. Waldhauser, R. Ebner, R.J. Bakker, T. Schöberl, B. Major: Thin Solid Films Vol. 468 (2004) p. 125.
76. P. Panjan, M. Cekada, D. Kek Merl, M. Macek: Vacuum Vol. 71 (2003) p. 261.
77. C. Suryanarayana: Non-equilibrium Processing of Materials (Pergamon, 1999, p. 313).
78. J.M. Lackner, W. Waldhauser, R. Ebner, R.J. Bakker: Applied Physics A Vol. 79 (2004) p. 1469.