Heat and mass transfer during fry-drying of sewage sludge

Drying Technology

Volumn 24, Issue 7, 2006, Pages 797-818

  Peregrina, C ^a   Arlabosse, P ^a   Lecomte, D ^a   Rudolph, V ^b  

^a ECOLE DES MINES D ALBI CARMAUX   (France)

^b UNIVERSITY OF QUEENSLAND   (Australia)

Author keywords

Boiling; Drying; Frying; Impregnation; Incineration; Recycled cooking oil

Indexed keywords

BOILING LIQUIDS; DRYING; HEAT TRANSFER; IMAGE ANALYSIS; IMPREGNATION; INCINERATION; MASS TRANSFER; OILS AND FATS;

DEEP-FRYING; RECYCLED COOKING OIL;

SEWAGE SLUDGE;

BOILING LIQUIDS; DRYING; HEAT TRANSFER; IMAGE ANALYSIS; IMPREGNATION; INCINERATION; MASS TRANSFER; OILS AND FATS; SEWAGE SLUDGE;

EID: 33745081827     PISSN: 07373937     EISSN: 15322300     Source Type: Journal    
DOI: 10.1080/07373930600733085     Document Type: Article

References (84)

1. Vermeersch, G.; Raoult-Wack, A.L.; Trystram, G.Understanding the frying process: Product quality. OCL, Oléagineux Corps Gras Lipides 1998, 5 (1), 28-29 (in French).
2. Vitrac, O. Experimental Characterization and Modeling of the Frying Operation; Ph.D. Thesis. Ecole Nationale Supérieure des Industries Agricoles et Alimenatires: Paris, France, 2000(in French).
3. Arlabosse, P. Study on Thermal Drying Processes of Municipal and Industrial Sewage Sludges; Report no. 99-0217/1A; Ecole des Mines d'Albi Carmaux & Association RE.CO.R.D.: Albi, France, 2001(in French).
4. Grüter, H.; Matter, M.; Oehlmann, K.H.; Hicks, M.D.Drying of sewage sludge. An important step in waste disposal. Water Science and Technology 1990, 22 (12), 57-63.
5. Vaxelaire, J.; Bongiovanni, J.M.; Mousques, P.; Puiggali, J.R.Thermal drying of residual sludge. Water Research 2000, 34 (17), 4318-4323. [CSA] [CROSSREF]
6. Ressent, S. State of the Art in Thermal Drying of Municipal and Industrial Sewage Sludge; Agence de l'eau Seine-Normandie: Paris, France, 1998(in French).
7. Chen, G.; Yue, P.L.; Mujumdar, A.S.Sludge dewatering and drying. Drying Technology 2002, 20 (4-5), 883-916. [CSA] [CROSSREF]
8. Kudra, T.Sticky region in drying - Definitions and identification. Drying Technology 2003, 21 (8), 1457-1469. [CSA] [CROSSREF]
9. Lowe, P.Developments in the thermal drying of sewage sludge. Journal of the Chartered Institution of Water and Environmental Management 1995, 9 (3), 306. [CSA]
10. Pires da Silva, D. Study of Sewage Sludge Drying Using Immersion Frying; Ph.D. Thesis. Universidade Estadual de Campinas: Campinas, SP, Brazil, 2003(in Portuguese).
11. Peregrina, C.; Arlabosse, P.; Lecomte, D.Fry-drying of sewage sludge: An alternative for the disposal of recycled food oils. The 9th International Congress on Engineering and Food - ICEF09; 7-11 March; Montpellier, France, 2004; 154-159.
12. Peregrina, C.; Arlabosse, P.; Lecomte, D.Thermal efficiency in sewage sludge fry drying. In Proceedings of the 14th International Drying Symposium - IDS; São Paulo, Brazil, 2004; 972-978.
13. Boatella-Riera, J.; Codony, R.; Rafecas, M.; Guardioal, F. Recycled Cooking Oils: Assessments of Risk for Public Health; European Parliament: Luxembourg, 2000.
14. Mauvieux, P.; Madeline, Y.; Gabarda-Oliva, D.; Fondin, P.; Cholin, B.; Picard, J.M. Greasy Wastewater Treatment: Which Are the Solutions and Their Costs?; Pollutec 2001 Paris, France, 2001(in French).
15. Mittelman, A.; Mizrahi, S.; Berk, Z.Heat and mass transfer in frying. In Engineering and Food; McKenna, B.M., Ed.; Elsevier Applied Science Publishers1984; 109-116.
16. Gamble, M.H.; Rice, P.; Selman, J.D.Relationships between oil uptake and moisture loss during frying potato slices from c.v. Record U.K. tubers. International Journal of Food Science and Technology 1987, 22, 233-241. [CSA]
17. Farkas, B.E.; Singh, R.P.; Rumsey, T.R.Modeling heat and mass transfer in immersion frying. I, Model development. Journal of Food Engineering 1996, 29 (2), 211-226. [CSA] [CROSSREF]
18. Farkas, B.E.; Singh, R.P.; Rumsey, T.R.Modeling heat and mass transfer in immersion frying. II, Model solution and verification. Journal of Food Engineering 1996, 29 (2), 227-248. [CSA]
19. Singh, R.P.Heat and mass transfer in foods during deep-fat frying. Food Technology 1995, 49 (4), 134-137. [CSA]
20. Moreira, R.; Castell-Perez, M.; Barrufet, M. Deep-Fat Frying: Fundamentals and Applications. Food Engineering; Aspen Publications: Gaithersburg, MD, 1999.
21. Ni, H.; Datta, K.Moisture, oil and energy transport during deep-fat frying of food materials. Trans IChemE 1999, 77 (C), 194-204. [CSA]
22. Saguy, S.; Pinthus, E.J.Oil uptake during deep-fat frying: Factors and mechanism. Food Technology 1995, 49 (4), 142-145, 152. [CSA]
23. Saguy, S.; Ufheil, G.; Livings, S.Oil uptake in deep-fat frying: Review. OCL, Oléagineux Corps Gras Lipides 1998, 5 (1), 30-35. [CSA]
24. McGill, E.A.The chemistry of frying. Baker's Digest 1980, 54 (3), 38-42. [CSA]
25. Graille, J.Chemical reactions induced by the frying. OCL, Oléagineux Corps Gras Lipides 1998, 5 (1), 36-40(in French). [CSA]
26. Dobarganes, C.Formation and analysis of high molecular weight compounds in frying fats and oils. OCL, Oléagineux Corps Gras Lipides 1998, 5 (1), 41-47. [CSA]
27. Blumenthal, M.A new look at the chemistry and physics of deep-fat frying. Food Technology 1991, 45 (2), 68-71, 94. [CSA]
28. Chavez, S. Agitated Conductive Drying Process of Municipal Sewage Sludge: Effect of the Type of Sludge and the Operating Conditions upon the Drying Kinetics and the Characteristics of the Dried Sludge and the Exhaust Vapors; Ph.D. Thesis, Université de Perpignan: Perpignan, France, 2004(in French).
29. Arlabosse, P.; Chavez, S.Characterization of some sewage sludge properties essential for the design and management of thermal processes. Environmental Technology 2005, Submitted. [CSA]
30. Huyard, A.; Ducray, F.; Patria, L. Sewage Sludge: Respect of French Regulation and Impact of the Future European Directive Project; CNISF:AGHTM symposium Pollutec 28 November 2002 LyonFrance.
31. Sud-Recupération. Treatment and Disposal of Recycled Cooking Oils; available at www.sudr-recuperation.fr/traitement.html, accessed 15 August 2005 (in French).
32. Miller, K.S.; Singh, R.P.; Farkas, B.E.Viscosity and heat transfer coefficients for canola, corn, plam and soybean oil. Journal of Food Processing and Preservation 1994, 186), 461-472. [CSA]
33. Tseng, Y.; Moreira, R.; Sun, X.Total frying-use time effects on soybean-oil deterioration and on tortilla chip quality. International Journal of Food Science and Technology 1996, (313), 287-294. [CSA] [CROSSREF]
34. Nawar, W.W.Lipids. In Food Chemistry, 3rd Ed; Marcel Dekker, Inc.: New York, 1996; 254-299.
35. Baumann, B.; Escher, F.Mass and heat transfer during deep-fat frying of potato slices - 1. Rate of drying and oil uptake. Lebensmittel Wissenschaft und Technologie 1995, 4 (28), 395-403. [CSA] [CROSSREF]
36. Moreira, R.; Palau, J.; Sun, X.Simultaneous heat and mass transfer during the deep fat frying of tortilla chips. Journal of Food Processing Engineering 1995, 18 (3), 307-320. [CSA]
37. Vitrac, O.; Dufour, D.; Trystram, G.; Raoult-Wack, A.-L.Characterization of heat and mass transfer during deep-fat frying and its effect on cassava chip quality. Journal of Food Engineering 2002, 53 (2), 161-176. [CSA] [CROSSREF]
38. Kemp, I.C.; Fyhr, B.C.; Laurent, S.; Roques, M.A.; Groenewold, C.E.; Tsotsas, E.; Sereno, A.A.; Bonazzi, C.B.; Bimbenet, J.J.; Kind, M.Methods for processing experimental drying kinetics data. Drying Technology 2001, 19 (1), 15-34. [CSA] [CROSSREF]
39. Vitrac, O.; Bohuon, P.Internal coupled heat and mass transfer during deep-frying of materials with high water contents: Application to apple chips fried at atmospheric pressure. The 9th International Congress on Engineering and Food-ICEF09; Montpellier, France, 2004; 177-182.
40. Degremont. Water Technical Handbook; Tec & Doc-Lavoisier: Paris, France, 1989(in French).
41. Aguilera, J.; Gloria, H.Determination of oil in fried potato products by differential scanning calorimetry. Journal of Agricultural and Food Chemistry 1997, 45, 781-785. [CSA] [CROSSREF]
42. Canselier, J.P.; Poux, M. Processes of Emulsification-Mechanisms of Emulsion Formation; Techniques de l'ingénieur. Ref:J2150-52 (in French).
43. Peters, D.C.Dynamics of emulsification. In Mixing in the Process Industries, 2nd Ed; Butterworth-Heinemann: Oxford, UK, 1992; 294-314.
44. Carey, V.P.Transport effects and dynamic behavior of interfaces. In Liquid-Vapor Phase-Change Phenomena; Series in Chemical and Engineering, Taylor & Francis: Bristol, PA, 1992; 85-126.
45. Melton, S.L.; Jafar, S.; Sykes, D.; Trigiano, M.K.Review of stability measurement for frying oils and fried food flavor. Journal of the American Oil Chemists' Society 1994, 71 (12), 1301. [CSA]
46. Paddy, J.F.; Russell, D.R.The measurement of the surface tension of pure liquids and solutions. Journal of Colloid Science 1960, 15, 503-511. [CSA] [CROSSREF]
47. Farkas, B.E.; Hubbard, L.J.Analysis of convective heat transfer during immersion frying. Drying Technology 2000, 18 (6), 1269-1285. [CSA]
48. Costa, R.M.; Oliveira, F.A.R.; Delaney, O.; Gekas, V.Analysis of the heat transfer coefficient during potato frying. Journal of Food Engineering 1999, 39 (3), 293-299. [CSA] [CROSSREF]
49. Costa, R.; Oliveira, A.; Delaney, O.Dependency of the heat transfer coefficient on surface boiling during frying of potato slices. In Proceedings of the 11th International Drying Symposium (IDS'98); Halkidiki, Greece, 1998; 1194-1199.
50. Hubbard, L.J.; Farkas, B.E.Determination of the convective heat transfer coefficient during immersion frying. In Proceedings of the 11th International Drying Symposium (IDS'98); Halkidiki, Greece, 1998; 781-788.
51. Sahin, S.; Sastry, S.K.; Bayindirli, L.The determination of convective heat transfer coefficient during frying. Journal of Food Engineering 1999, 39 (3), 307-311. [CSA] [CROSSREF]
52. Vitrac, O.; Trystram, G.; Raoult-Wack, A.-L.Continuous measurement of convective heat flux during deep-frying: Validation and application to inverse modeling. Journal of Food Engineering 2003, 60 (2), 111-124. [CSA] [CROSSREF]
53. Pannu, K.S.; Chinnan, M.S.Relating food frying to daily oil abuse. Part I. Determination of surface heat transfer coefficients with metal balls. In Transport Phenomena in Food Processing; CRC Press: Boca Raton, FL, 2003; 399-412.
54. Whitaker, S. Fundamental Principles of Heat Transfer; Pergamon Press: New York, 1977.
55. Tong, L.S.; Tang, Y.S. Boiling Heat Transfer and Two-Phase Flow, 2nd Ed.; Series in Chemical and Mechanical Engineering, Taylor and Francis: London, 1997.
56. Farid, M.The moving boundary problems from melting and freezing to drying and frying of food. Chemical Engineering and Processing 2002, 41 (1), 1-10. [CSA] [CROSSREF]
57. Farid, M.A unified approach to the heat and mass transfer in melting, solidification, frying and different drying processes. Chemical Engineering Science 2001, 56 (18), 5419-5427. [CSA] [CROSSREF]
58. Stefan, J.Ice development theory: Formation of ice in the Polar seas. Annalen der Physik und Chemie 1891, 42, 269-286(in German). [CSA]
59. Yortsos, Y.C.; Stubos, A.K.Phase change in porous media. Current Opinion in Colloid & Interface Science 2001, 6 (3), 208-216. [INFOTRIEVE] [CSA] [CROSSREF]
60. Topin, F. Boiling in a Porous Material. Seminar on liquid-solid change phase and its applications. Cargèse, France, 2003(in French).
61. Lallemand, M. Phase Change in Confined Environments. Seminar on liquid-solid change phase and its applications. Cargèse, France, 2003(in French).
62. Chen, Y.; Moreira, R.Modelling of a batch deep-fat frying process for tortilla chips. Trans IChemE 1997, 75 (Part C), 181-190. [CSA]
63. Moreira, R.; Sun, X.; Chen, Y.Factors affecting oil uptake in tortilla chips in deep-fat frying. Journal of Food Engineering 1997, 31, 485-498. [CSA] [CROSSREF]
64. Ufheil, G.; Escher, F.Dynamics of oil uptake during deep-fat frying of potato slices. Lebensmittel Wissenschaft und Technologie 1996, 29, 640-644. [CSA] [CROSSREF]
65. Smith, M.C.; Farid, M.A single correlation for the prediction of dehydration time in drying and frying of samples having different geometry and size. Journal of Food Engineering 2004, 63 (3), 265-271. [CSA] [CROSSREF]
66. Diaz, A.; Totte, A.; Giroux, F.; Reynes, M.; Raoult-Wack, A.L.Deep-fat frying of plantain (Musa paradisiaca L.). I. Characterization of control parameters. Lebensmittel Wissenschaft und Technologie 1996, 29, 489-497. [CSA] [CROSSREF]
67. Tsouris, C.; Porcelli, J.V.Process intensification - Has its time finally come? CEPmagazine 2003, October Issue, pp. 50-55. [CSA]
68. Arlabosse, P.Penetration model for contact drying of agitated sewage sludge. Chemical Engineering Transactions 2005, 7(2) 701-706. [CSA]
69. Brereton, C.; Lim, C.Spouted bed drying of sludge from metals finishing industries wastewater treatment plants. Drying Technology 1993, 11 (2), 389-399. [CSA]
70. Peregrina, C.; Arlabosse, P.; Lecomte, D.; Rudolph, V.Fry-drying: An intermediate sustainable operation for the co-disposal of sewage sludge and waste food oil. The 7th World Congress of Chemical Engineering; Glasgow, Scotland, 10-15 July, 2005.
71. Carrère-Gée, C. Indirect Drying of Thin-Film Alumina Sludge by Boiling - Application on Drum Drying; Ph.D. Thesis. Université Paul Sabatier: Toulouse, France, 1999(in French).
72. Peregrina, C.; Rudolph, V.; Lecomte, D.; Arlabosse, P.A new application of immersion frying for the thermal drying of sewage sludge: An economic assessment. Journal of Environmental Management 2006, Submitted. [CSA]
73. Werther, J.; Ogada, T.Sewage sludge combustion. Progress in Energy and Combustion Science 1999, 25 (1), 55-116. [CSA] [CROSSREF]
74. Niessen, W.R.Biological wastewater sludge: Sludge properties. In Combustion and Incineration Processes: Applications in Environmental Engineering, 2nd Ed; Marcel Dekker, Inc.: Cambridge, MA, 1995; 168-169.
75. Peregrina, C.; Lecomte, D.; Arlabosse, P.; Rudolph, V.Life cycle assessment (LCA) applied to the design of an innovative drying process for sewage sludge. Process Safety and Environmental Protection 2005, in press. [CSA]
76. Pires da Silva, D.; Peregrina, C.; Arlabosse, P.; Lecomte, D.; Pereira, O.; Rudolph, V.Fry-drying of sewage sludge: Preliminary results. In Proceedings of the 6th Conference on Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction - PRES'03; Hamilton, Ontario, Canada, 2003.
77. Ressent, S. Testing the Efficiency of Thermal Dryers of Municipal and Industrial Sewage Sludges; Report on 99INDU04; Agence de l'eau Seine-Normandie: Paris, France, 1999, 268(in French).
78. Bresters, A.R.; Coulomb, I.; Deak, B.; Matter, B.; Saabye, A.; Spinosa, L.; Utvik, A. Sludge Treatment and Disposal: Management Approaches and Experiences; European Environmental Agency & International Solid Waste Association: Copenhagen, 1997.
79. Christiannsen, K.M. Waste Annual Topic Update 1998. European Environment Agency: Copenhagen, 1999.
80. Munck-Kampmann, B. Waste Annual Topic Update 2000; European Environment Agency: Copenhagen, 2001.
81. Porteous, A.Energy from waste incineration - A state of the art emissions review with an emphasis on public acceptability. Applied Energy 2001, 70 (2), 157-167. [CSA] [CROSSREF]
82. Léonard, A. Study of Convective Drying of Wastewater Sludge - Texture Follow-Up by X-Ray Microtomography; Ph.D. Thesis. Université de Liège: Liège, Belgium, 2002(in French).
83. Freitas, L.; Freire, J.Heat transfer in spouted beds. Drying Technology 1993, 11 (2), 303-317. [CSA]
84. Couturier, C.; Berger, S.; Hèrault, I.; Meiffren, I. Anaerobic Digestion of Municipal Sewage Sludge: State of the Art; Agence de l'eau Adour-Garonne & Solagro: Toulouse, France, 2001(in French).