Scaling, dimensional analysis, and indentation measurements

Materials Science and Engineering R: Reports

Volumn 44, Issue 4-5, 2004, Pages 91-149

  Cheng, Yang Tse ^a   Cheng, Che Min ^b  

^a GENERAL MOTORS CORPORATION   (United States)

^b INSTITUTE OF MECHANICS   (China)

Author keywords

Analysis; Indentation; Scaling

Indexed keywords

CERAMIC MATERIALS; CONTINUUM MECHANICS; CREEP TESTING; DEFORMATION; FRACTURE MECHANICS; INDENTATION; MICROELECTRONICS; OPTOELECTRONIC DEVICES; ROCK MECHANICS; SURFACE MEASUREMENT; TRIBOLOGY; VICKERS HARDNESS TESTING; VISCOELASTICITY;

DIMENSIONAL ANALYSIS; INDENTATION MEASUREMENTS; INDENTER GEOMETRY; SURFACE AREAS;

MATERIALS SCIENCE;

EID: 3242711141     PISSN: 0927796X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mser.2004.05.001     Document Type: Review

References (275)

1. See an early account in English by: A. Wahlberg, J. Iron Steel Inst. 59 (1901) 243.
2. B.W. Mott, Micro-indentation Hardness Testing, Butterworths, London, 1956.
3. D. Tabor, Hardness of Metals, Clarendon Press, Oxford, 1951.
4. M. Bauccio (Ed.), ASM Metals Reference Book, third ed., ASM International, Materials Park, 1993.
5. Ternovskii A.P., Alekhin V.P., Shorshorov M.Kh., Khrushchov M.M., Skvortsov V.N. Ind. Lab. (transl: Zavodskaya Laboratoriya). 39:1973;1242.
6. Bulychev S.I., Alekhin V.P., Shorshorov M.Kh., Ternovskii A.P., Shnyrev G.D. Ind. Lab. (transl.: Zavodskaya Laboratoriya). 41:1975;1137.
7. Fröhlich F., Grau P., Grellmann W. Phys. Stat. Sol. (a). 42:1977;79.
8. Newey D., Wilkins M.A., Pollock H.M. J. Phys. E: Sci. Instrum. 15:1982;119.
9. Loubet J.L., Georges J.M., Marchesini O., Meille G. J. Tribol. 106:1984;43.
10. Pethica J.B., Hutchings R., Oliver W.C. Philos. Mag. A. 48:1983;593.
11. This partial list of companies does not necessarily represent authors' preference: http://www.mts.com/nano; http://www.hysitron.com ; http://www.microphotonics.com/nht.html; http://www.micromaterials.co.uk; http://www.ctip.csiro.au/IMP/Surfaces/UMIS/.
12. Doerner M.F., Nix W.D. J. Mater. Res. 1:1986;601.
13. Oliver W.C., Pharr G.M. J. Mater. Res. 7:1992;1564.
14. Ortiz M. Computat. Mech. 18:1996;321.
15. D. Raabe, Computation Materials Science - The Simulation of Materials Microstructures and Properties, Wiley-VCH, Weinheim, 1998.
16. K. Ohno, K. Esfarjani, Y. Kawazoe, Computational Materials Science - From Ab Initio to Monte Carlo Methods, Springer-Verlag, Berlin, 1999.
17. T. Diaz de la Rubia, V.V. Bulatov (Eds.), Materials research by means of multiscale computer simulation, MRS Bull. 26 (2001).
18. Curtin W.A., Miller R.E. Model. Simul. Mater. Sci. 11:2003;R33-R68.
19. Smith G.S., Tadmor E.B., Kaxiras E. Phys. Rev. Lett. 84:2000;1260.
20. Zimmerman J.A., Kelchner C.L., Klein P.A., Hamilton J.C., Foiles S.M. Phys. Rev. Lett. 87:2001;165507.
21. Knap J., Ortiz M. Phys. Rev. Lett. 90:2003;226102.
22. J.H. Westbrook, H. Conrad (Eds.), The Science of Hardness testing and Its Research Applications, American Society for Metals, Metals Park, 1973.
23. S.P. Baker, R.F. Cook, S.G. Corcoran, N.R. Moody (Eds.), Fundamentals of Nanoindentation and Nanotribology II, Mater. Res. Soc. Symp. Proc. 649 (2001).
24. M.M. Chaudhri, Y.Y. Lim (Eds.), Second International Indentation Workshop, Cavendish Laboratory, University of Cambridge, Cambridge, UK, 15-20 July 2001, Phil. Mag. 82 (2002).
25. A. Kumar, W.-J. Meng, Y.-T. Cheng, J,S. Zabinski, G.L. Doll, S. Veprek (Eds.), Surface Engineering 2002 - Synthesis, Characterization and Applications, Mater. Res. Soc. Symp. Proc. 750 (2003).
26. Proceedings of the yearly International Conference on Metallurgical Coatings and Thin Films published in Thin Solid Films and Surface and Coatings Technology.
27. Focus topic: nanoindentation, J. Mater. Res. 14 (1999).
28. Y.-T. Cheng, T. Page, G.M. Pharr, M. Swain, K.J. Wahl (Eds.), Fundamentals and Applications of Instrumented Indentation in Multidisciplinary Research, J. Mater. Res. 19 (2004) 1.
29. Towler M.R., Bushby A.J., Billington R.W., Hill R.G. Biomaterials. 22:2001;1401.
30. Habelitz S., Marshall S.J., Marshall G.W., Balooch M. Arch. Oral Biol. 46:2001;173.
31. Mahoney E., Holt A., Swain M., Kilpatrick N. J. Dent. 28:2000;589.
32. Hengsberger S., Enstroem J., Peyrin F., Zysset Ph. J. Biomech. 36:2003;1503.
33. Saarakkala S., Laasanen M.S., Jurvelin J.S., Törrönen K., Lammi M.J., Lappalainen R., Töyräs J. Osteoarth. Cartil. 11:2003;697.
34. Rho J.Y., Tsui T.Y., Pharr G.M. J. Biomech. 31:1998;21.
35. Kohane M., Daugela A., Kutomi H., Charlson L., Wyrobek A., Wyrobek J. J. Biomed. Res. 66A:2003;633.
36. Liu Z., Scanlon M.G. Biosyst. Eng. 85:2003;477.
37. Özkan N., Xin H., Chen X.D. J. Food Sci. 67:2002;1814.
38. Yoshioka N., Yoshioka M. Geophys. Res. Lett. 22:1995;113.
39. Dieterich J.H., Kilgore B.D. Pure Appl. Geophys. 143:1994;238.
40. H.M. Pollock, in: Friction, Lubrication and Wear Technology, ASM Handbook, vol. 18, ASM International, Materials Park, OH, 1992, pp. 419-429.
41. Mencik J., Swain M.V. Mater. Forum. 18:1994;277.
42. Pharr G.M. Mater. Sci. Eng. A253:1998;151.
43. Wolf B. Cryst. Res. Technol. 35:2000;377.
44. J.L. Hay, G.M. Pharr, in: H. Kuhn, D. Medlin (Eds.), ASM Handbook: Mechanical Testing and Evaluation, 10th ed., vol. 8, ASM International, Materials Park, 2000, p. 232.
45. Bhushan B., Li X. Int. Mater. Rev. 48:2003;125.
46. VanLandingham M.R. J. Res. Natl. Inst. Stand. Technol. 108:2003;249.
47. Mackerle J. Finite Elem. Anal. Design. 37:2001;811.
48. Mackerle J. Engineering computations. Int. J. Comput.-Aid. Eng. 21:2004;23.
49. I.J. McColm, Ceramic Hardness, Plenum Press, New York, 1990.
50. A.C. Fischer-Cripps, Nanoindentation, Springer-Verlag, New York, 2002.
51. Cheng Y.-T., Cheng C.-M. Phil. Mag. Lett. 77:1998;39.
52. Cheng Y.-T., Cheng C.-M. Int. J. Solids Struct. 36:1999;1231.
53. Cheng Y.-T., Cheng C.-M. J. Appl. Phys. 84:1998;1284.
54. Cheng Y.-T., Cheng C.-M. Surf. Coat. Technol. 133-134:2000;417.
55. Cheng Y.-T., Cheng C.-M. Phil. Mag. Lett. 81:2001;9.
56. T.L. Heath, The Thirteen Books of Euclid's Elements, Dover, New York, 1956; http://aleph0.clarku.edu/̃djoyce/java/elements/toc.html.
57. Peterson M.A. Am. J. Phys. 70:2002;575.
58. G. Galilei, Dialogues Concerning Two New Sciences, Dover, New York, 1954.
59. G.I. Barenblatt, Scaling, Self-similarity, and Intermediate Asymptotics, Cambridge University Press, Cambridge, 1996.
60. Buckingham E. Phys. Rev. 4:1914;345.
61. Rayleigh L. Nature. 95:1915;66.
62. P.W. Bridgman, Dimensional Analysis, Yale University, New Haven, 1922.
63. L.I. Sedov, Similarity and Dimensional Methods in Mechanics, Academic, New York, 1959.
64. E.S. Taylor, Dimensional Analysis for Engineers, Clarendon Press, Oxford, 1974.
65. T. Szirtes, Applied Dimensional Analysis and Modeling, McGraw-Hill, New York, 1997.
66. Astarita G. Chem. Eng. Sci. 52:1997;4681.
67. Butterfield R. Geotechnique. 49:1999;357.
68. Macagno E. J. Franklin Inst. 292:1971;391.
69. F.M. Borodich, Similarity methods in Hertz contact problems and their relations with Meyer hardness test, Technical Report TR/MAT/FMB/98-98, Department of Mathematics, Glasgow Caledonian University, Glasgow G4 0BA, April 1998.
70. Barber J.R., Ciavarella M. Int. J. Solids Struct. 37:2000;29.
71. Borodich F.M., Galanov B.A. J. Mech. Phys. Solids. 50:2002;2441.
72. Lawn B.R., Wilshaw T.R. J. Mater. Sci. 10:1975;1049.
73. Evans A.G., Wilshaw T.R. Acta Mater. 24:1976;939.
74. Evan A.G., Charles E.A. J. Am. Ceram. Soc. 59:1976;371.
75. Lawn B.R., Evans A.G., Marshall D.B. J. Am. Ceram. Soc. 63:1980;574.
76. Lawn B.R. J. Am. Ceram. Soc. 81:1998;1977.
77. Lawn B.R. J. Mater. Res. 19:2004;22.
78. Y.C. Fung, P. Tung, Classical and Computational Solid Mechanics, World Scientific, Singapore, 2001.
79. G. Dieter, Mechanical Metallurgy, second ed., McGraw-Hill, New York, 1976.
80. J. Lubliner, Plasticity Theory, Macmillan, New York, 1990.
81. Arzt E. Acta Mater. 46:1998;5611.
82. W.N. Findley, J.S. Lai, K. Onaran, Creep and Relaxation of Nonlinear Viscoelastic Materials, Dover, Mineola, 1989.
83. R.M. Christensen, Theory of Viscoelasticity, second ed., Academic Press, New York, 1982.
84. G.T. Mase, G.E. Mase, Continuum Mechanics for Engineers, second ed., CRC press, Boca Raton, 1999.
85. Love A.E.H. Quat. Math. (Oxford). 10:1939;161.
86. Harding J.W., Sneddon I.N. Proc. Camb. Phil. Soc. 41:1945;16.
87. Sneddon I.N. Int. J. Eng. Sci. 3:1965;47.
88. Tabor D. Rev. Phys. Technol. 1:1970;145.
89. J.L. Loubet, J.M. Georges, J. Meille, in: P.J. Blau, B.R. Lawn (Eds.), Microindentation Techniques in Materials Science and Engineering, American Society for Testing and Materials, Philadelphia, 1986, p. 92.
90. ABAQUS, Inc., Pawtucket, Rhode Island 02860, USA.
91. Giannakopoulos A.E., Larsson P.-L., Vestergaard R. Int. J. Solids Struct. 31:1994;2679.
92. Larsson P.L., Giannakopoulos A.E., Söderlund E., Rowcliffe D.J., Vestergaard R. Int. J. Solids Struct. 33:1996;221.
93. Sakai M. Acta Metall. Mater. 41:1993;1751.
94. Rother B. Surf. Coat. Technol. 86-87:1996;535.
95. Hainsworth S.V., Chandler H.W., Page T.F. J. Mater. Res. 11:1996;1987.
96. Malzbender J., de With G., den Toonder J. J. Mater. Res. 15:2000;1209.
97. Troyon M., Martin M. Appl. Phys. Lett. 83:2003;863.
98. Li Z.Y., Chandrasekar S., Yang H.T. J. Appl. Mech. 69:2002;394.
99. Cheng Y.-T., Cheng C.-M. J. Mater. Res. 13:1998;1059.
100. Sun S., Zheng S., Bell T., Smith J. Phil. Mag. Lett. 79:1999;649.
101. Norbury A.L., Samuel T. J. Iron Steel Inst. 117:1928;673.
102. Chaudhri M.M., Winter M. J. Phys. D. 21:1988;370.
103. Bec S., Tonck A., Georges J.-M., Georges E., Loubet J.-L. Phil. Mag. A74:1996;1061.
104. Cheng Y.-T., Cheng C.-M. Phil. Mag. Lett. 78:1998;115.
105. Lockett F.J. J. Mech. Phys. Solids. 11:1963;345.
106. Chaudhri M.M., Lim Y.Y. Phil. Mag. A79:1999;2979.
107. Hill R., Storåkers B., Zdunek A. Proc. R. Soc. Lond. A. 423:1989;301.
108. Storåkers B., Biwa S., Larsson P.-L. Int. J. Solids Struct. 34:1997;3061.
109. Bishop R.F., Hill R., Motts N.F. Proc. Phys. Soc. 57:1945;147.
110. Marsh D.M. Proc. R. Soc. A279:1964;420.
111. Johnson K.L. J. Mech. Phys. Solids. 18:1970;115.
112. Yoffe E.H. Phil. Mag. A46:1983;617.
113. Tabor D. Proc. R. Soc. Lond. A192:1948;247.
114. Chaudhri M.M. Acta Mater. 46:1998;3047.
115. D. Tabor, in: P.J. Blau, B.R. Lawn (Eds.), Microindentation Techniques in Materials Science and Engineering, American Society for Testing and Materials, Philadelphia, 1986, p. 129.
116. Atkins A.G., Tabor D. J. Mech. Phys. Solids. 13:1965;149.
117. Cheng Y.-T., Li Z. J. Mater. Res. 15:2000;2830.
118. Pharr G.M., Oliver W.C., Brotzen F.R. J. Mater. Res. 7:1992;613.
119. Sakai M., Shimizu S., Ishikawa T. J. Mater. Res. 14:1999;1471.
120. Sakai M. J. Mater. Res. 14:1999;3630.
121. Sakai M., Nakano Y. J. Mater. Res. 17:2002;2161.
122. Sakai M. J. Mater. Res. 18:2003;1631.
123. Bolshakov A., Oliver W.C., Pharr G.M. Mater. Res. Soc. Symp. Proc. 356:1995;675.
124. Pharr G.M., Bolshakov A. J. Mater. Res. 17:2002;2660.
125. Woirgard J., Dargenton J-C. J. Mater. Res. 12:1997;2455.
126. Woirgard J., Dargenton J-C., Tromas C., Audurier V. Surf. Coat. Technol. 100-101:1998;103.
127. Cheng C.-M., Cheng Y.-T. Appl. Phys. Lett. 71:1997;2623.
128. King R.B. Int. J. Solids Struct. 23:1987;1657.
129. Bhattacharya A.K., Nix W.D. Int. J. Solids Struct. 24:1988;881.
130. Laursen T.A., Simo J.C. J. Mater. Res. 7:1992;618.
131. Hendrix B.C. J. Mater. Res. 10:1995;255.
132. Li K., Wu T.W., Li J.C.M. J. Mater. Res. 12:1997;2064.
133. Tanaka K., Koguchi H. Jpn. J. Tribol. 40:1995;129.
134. Bolshakov A., Pharr G.M. Mater. Res. Soc. Symp. Proc. 436:1997;189.
135. Bolshakov A., Pharr G.M. J. Mater. Res. 13:1998;1049.
136. Hay J.C., Bolshakov A., Pharr G.M. J. Mater. Res. 14:1999;2296.
137. Martin M., Troyon M. J. Mater. Res. 17:2002;2227.
138. Oliver W.C., Pharr G.M. J. Mater. Res. 19:2004;3.
139. Li Z., Cheng Y.-T., Yang H.T., Chandrasekar S. Surf. Coat. Technol. 154:2002;124.
140. Cheng Y.-T., Li Z., Cheng C.-M. Phil. Mag. A. 82:2002;1821.
141. Lawn B.R., Howes V.R. J. Mater. Sci. 16:1981;2745.
142. Cheng Y.-T., Cheng C.-M. Appl. Phys. Lett. 73:1998;614.
143. J.A. Williams, Engineering Tribology, Oxford University Press, Oxford, 1994.
144. Marshall D.B., Noma T., Evans A.G. J. Am. Ceram. Soc. 65:1982;C-175.
145. Leyland A., Matthews A. Wear. 246:2000;1.
146. Joslin D.L., Oliver W.C. J. Mater. Res. 5:1990;123.
147. Kusano Y., Hutchings I.M. Surf. Coat. Technol. 169-170:2003;739.
148. Kusano Y., Barber Z.H., Evetts J.E., Hutchings I.M. Surf. Coat. Technol. 174-175:2003;601.
149. Malzbender J., de With G. Surf. Coat. Technol. 135:2000;60.
150. Stilwell N.A., Tabor D. Proc. Phys. Soc. Lond. 78:1961;169.
151. Rother B., Steiner A., Dietrich D.A., Jehn H.A., Haupt J., Gissler W. J. Mater. Res. 13:1998;2071.
152. Gubicza J., Juhász A., Lendvai J. J. Mater. Res. 11:1997;2964.
153. Korsunsky A.M., McGurk M.R., Bull S.J., Page T.F. Surf. Coat. Technol. 99:1998;171.
154. Tuck J.R., Korsunsky A.M., Bull S.J., Elliott D.M. Surf. Coat. Technol. 127:2000;1.
155. Bull S.J. Mater. Res. Soc. Symp. Proc. 750:2003;Y6.1.1.
156. Giannakopoulos A.E., Suresh S. Scripta Mater. 40:1999;1191.
157. Malzbender J. J. Eur. Ceram. Soc. 23:2003;1355.
158. Ni W., Cheng Y.-T., Cheng C.-M., Grummon D.S. J. Mater. Res. 19:2004;149.
159. Jayaraman S., Hahn C.T., Oliver W.C., Rubin C.A., Bistias P.C. Int. J. Solids Struct. 35:1998;365.
160. Knapp J.A., Follstaedt D.M., Myers S.M., Barbour J.C., Friedmann T.A. J. Appl. Phys. 85:1999;1460.
161. Cheng Y.-T., Cheng C.-M. J. Mater. Res. 14:1999;3493.
162. Pelletier H., Krier J.J., Cornet A., Mille P. Thin Solid Films. 379:2000;147.
163. Venkatesh T.A., Van Vliet K.J., Giannakopoulos A.E., Suresh S. Scr. Mater. 42:2000;833.
164. Dao M., Chollacoop N., Van Vliet K.J., Venkatesh T.A., Suresh S. Acta Mater. 49:2001;3899.
165. Zeng K., Chiu C.-h. Acta Mater. 49:2001;3539.
166. Capehart T.W., Cheng Y.-T. J. Mater. Res. 18:2003;827.
167. Lichinchi M., Lenardi C., Haupt J., Vitali R. Thin Solid Films. 312:1998;240.
168. Li M., Chen W.-M., Liang N.-G., Wang L.-D. J. Mater. Res. 19:2004;73.
169. Tunvisut K., O'Dowd N.P., Busso E.P. Int. J. Solids Struct. 38:2001;335.
170. Tunvisut K., Busso E.P., O'Dowd N.P., Brantner H.P. Phil. Mag. A. 82:2002;2013.
171. Mata M., Alcala J. J. Mater. Res. 18:2003;1705.
172. Matsuda K. Phil. Mag. A82:2002;1941.
173. Futakawa M., Wakui T., Tanabe Y., Ioka I. J. Mater. Res. 16:2001;2283.
174. Bucaille J.L., Stauss S., Felder E., Michler J. Acta Mater. 51:2003;1663.
175. Chollacoop N., Dao M., Suresh S. Acta Mater. 51:2003;3713.
176. DiCarlo A., Yang H.T.Y., Chandrasekar S. J. Mater. Res. 18:2003;2068.
177. Hasanov A., Seyidmamedov Z. Int. J. Non-Linear Mech. 30:1995;465.
178. Taljat B., Zacharia T., Haggag F.M. J. Mater. Res. 12:1997;965.
179. Nayebi A., El Abdi R., Bartier O., Mauvoisin G. Mech. Mater. 34:2002;243.
180. Nayebi A., Bartier O., Mauvoisin G., El Abdi R. Int. J. Mech. Sci. 43:2001;2679.
181. Mart'ýnez E., Romero J., Lousa A., Esteve J. Appl. Phys. A. 77:2003;419.
182. Elghazal H., Lormand G., Hamel A., Girodin D., Vincent A. Mater. Sci. Eng. A303:2001;110.
183. Herbert E.G., Pharr G.M., Oliver W.C., Lucas B.N., Hay J.L. Thin Solid Films. 398-399:2001;331.
184. Hu X.Z., Lawn B.R. Thin Solid Films. 322:1998;225.
185. Huber N., Tsagrakisb I., Tsakmakis Ch. Int. J. Solids Struct. 37:2000;6499.
186. Huber N., Tsakmakis Ch. J. Mech. Phys. Solids. 47:1999;1569 Huber N., Tsakmakis Ch. J. Mech. Phys. Solids. 47:1999;1589.
187. Huber N., Tsakmakis Ch. J. Mech. Phys. Solids. 47:1999;1569 Huber N., Tsakmakis Ch. J. Mech. Phys. Solids. 47:1999;1589.
188. Huber N., Munz D., Tsakmakis Ch. J. Mater. Res. 12:1997;2459.
189. Kucharski S., Mróz Z. J. Eng. Mater. Technol. 123:2001;245 Kucharski S., Mróz Z. Mater. Sci. Eng. A318:2001;64.
190. Kucharski S., Mróz Z. J. Eng. Mater. Technol. 123:2001;245 Kucharski S., Mróz Z. Mater. Sci. Eng. A318:2001;64.
191. Nakamura T., Wang T., Sampath S. Acta Mater. 48:2000;4293.
192. Gua Y., Nakamura T., Prchlik L., Sampath S., Wallace J. Mater. Sci. Eng. A345:2003;223.
193. Ahn J.-H., Kwon D. J. Mater. Res. 16:2001;2137.
194. Ma D., Wo Ong C., Lu J., He J. J. Appl. Phys. 94:2003;288.
195. Atkins A.G., Silverio A., Tabor D. J. Inst. Met. 94:1966;369.
196. Chu S.N.G., Li J.C.M. J. Mater. Sci. 12:1977;2200.
197. Chu S.N.G., Li J.C.M. Mater. Sci. Eng. 39:1979;1.
198. Lucas G.E., Pendleton C. J. Nucl. Mater. 103-104:1981;1539.
199. Yang F.Q., Li J.C.M., Shih C.W. Mater. Sci. Eng. A201:1995;50.
200. Yang F. Int. J. Mech. Sci. 40:1998;87.
201. Li J.C.M. Mater. Sci. Eng. A322:2002;23.
202. Hannula S.-P., Stone D., Li C.-Y. Mater. Res. Soc. Symp. Proc. 40:1985;217.
203. Mayo M.J., Nix W.D. Acta Metall. 36:1988;2183.
204. Syed S.A., Pethica J.B. Phil. Mag. A. 76:1997;1105.
205. Lucas B.N., Oliver W.C. Metall. Mater. Trans. A. 30:1999;601.
206. Han W.-T., Tomozawa M. J. Am. Ceram. Soc. 73:1990;3626.
207. Grau P., Berg G., Meinhard H., Mosch S. J. Am. Ceram. Soc. 81:1998;1557.
208. Hill R. Proc. R. Soc. A436:1992;617.
209. Bower A.F., Fleck N.A., Needleman A., Ogbonna N. Proc. R. Soc. A. 441:1993;97.
210. Larsson J., Storåkers B. J. Mech. Phys. Solids. 50:2002;2029.
211. Storåkers B., Biwa S., Larsson P.L. Int. J. Solids Struct. 34:1997;3061.
212. Ma X., Yoshida F., Shinbata K. Mater. Sci. Eng. A344:2003;296.
213. Ma X., Yoshida F., Shinbata K. J. Mater. Sci. Lett. 21:2002;1397.
214. Garcia I.A., Berasategui E.G., Bull S.J., Page T.F., Neidhardt J., Hultman L., Hellgren N. Phil. Mag. A. 82:2002;2133.
215. Stone D.S., Yoder K.B. J. Mater. Res. 9:1994;2524.
216. Lee E.H. Q. Appl. Math. 13:1955;183.
217. Radok J.R.M. Q. Appl. Math. 15:1957;198.
218. Lee E.H., Radok J.R.M. J. Appl. Mech. 27:1960;438.
219. Hunter S.C. J. Mech. Phys. Solids. 8:1960;219.
220. Graham G.A.C. Int. J. Eng. Sci. 3:1965;27.
221. Graham G.A.C. Int. J. Eng. Sci. 5:1967;495.
222. Yang W.H. J. Appl. Mech. 33:1966;395.
223. Ting T.C.T. J. Appl. Mech. 33:1966;845.
224. Ting T.C.T. J. Appl. Mech. 35:1968;248.
225. Cheng L., Xia X., Yu W., Scriven L.E., Gerberich W.W. J. Polym. Sci.: Part B: Polym. Phys. 38:2001;10.
226. Larrson P.-L., Carlsson S. Polym. Test. 17:1998;49.
227. Shimizu S., Yanagimoto T., Sakai M. J. Mater. Res. 14:1999;4075.
228. Sakai M., Shimizu S. J. Non-Cryst. Solids. 282:2001;236.
229. Sakai M. Phil. Mag. A82:2002;1841.
230. Oyen M.L., Cook R.F. J. Mater. Res. 18:2003;139.
231. Unertl W.N. J. Adhesion. 74:2000;195.
232. Briscoe B.J., Fiori L., Pelillo E. J. Phys. D: Appl. Phys. 31:1998;2395.
233. Hochstetter G., Jimenez A., Loubet J.L. J. Macromol. Sci.: Phys. B38:1999;681.
234. Chudoba T., Richter F. Surf. Coat. Technol. 148:2001;191.
235. Feng G., Ngan A.H.W. J. Mater. Res. 17:2002;660.
236. Ngan A.H.W., Tang B. J. Mater. Res. 17:2002;2604.
237. Tang B., Ngan A.H.W. J. Mater. Res. 18:2003;1141.
238. Rikards R., Flores A. J. Macromol. Sci.: Phys. B40:2001;763.
239. Bucaille J.L., Felder E., Hochstetter G. J. Mater. Sci. 37:2002;3999.
240. Ovaert T.C., Kim B.R., Wang J. Prog. Org. Coat. 47:2003;312.
241. Huber N., Tyulyukovskiy E. J. Mater. Res. 19:2004;101.
242. Loubet J.L., Lucas B.N., Oliver W.C. Natl. Inst. Stand. Technol. Spec. Publ. 896:1996;31.
243. Shinozaki D.H., Liu Y. J. Electron. Mater. 26:1997;852.
244. Lucas B.N., Oliver W.C., Swindeman J.E. Mater. Res. Soc. Symp. Proc. 522:1998;3.
245. Burnham N.A., Baker S.P., Pollock H.M. J. Mater. Res. 15:2000;2006.
246. Loubet J.L., Oliver W.C., Lucas B.N. J. Mater. Res. 15:2000;1195.
247. Syed Asif S.A., Wahl K.J., Colton R.J., Warren O.L. J. Appl. Phys. 90:2001;1192.
248. Borovsky B., Krim J., Syed Asif S.A., Wahl K.J. J. Appl. Phys. 90:2001;6391.
249. Lorence D., Fränzel W., Eiunax M., Grau P., Berg G. J. Mater. Res. 16:2001;1776.
250. Briscoe B.J., Sebastian K.S. Proc. R. Soc. Lond. A. 452:1996;439.
251. Flores A., Balatá Calleja F.J. Phil. Mag. A. 78:1998;1283.
252. Klapperich C., Komvopoulos K., Pruitt L. J. Tribol. Trans. ASME. 123:2001;624.
253. Bull S.J. Z. Metallkd. 94:2003;787.
254. N.A. Stelmashenko, M.G. Walls, L.M. Brown, Yu.V. Milman, in: M. Nastasi, D.M. Parkin, H. Gleiter (Eds.), Mechanical Properties and Deformation Behavior of Materials Having Ultra-fine Microstructures, NATO ASI Ser. E233 (1993) 605.
255. Fleck N.A., Muller G.M., Ashby M.F., Hutchinson J.W. Acta Met. Mater. 42:1994;475.
256. Poole W.J., Ashby M.F., Fleck N.A. Scr. Mater. 34:1996;559.
257. Nix W.D., Gao H. J. Mech. Phys. Solids. 46:1998;411.
258. McElhaney K.W., Vlassak J.J., Nix W.D. J. Mater. Res. 13:1998;1300.
259. Liu Y., Ngan A.H.W. Scr. Mater. 44:2001;237.
260. Xue Z., Huang Y., Hwang K.C., Li M. J. Eng. Mater. Technol. 124:2002;371.
261. Swadener J.G., George E.P., Pharr G.M. J. Mech. Phys. Solids. 50:2002;681.
262. Gao H., Huang Y. Scr. Mater. 48:2003;113.
263. Wei Y., Wang X., Zhao M. J. Mater. Res. 19:2004;208.
264. Lam D.C.C., Chong A.C.M. Mater. Sci. Eng. A318:2001;313.
265. Lam D.C.C., Chong A.C.M. J. Mater. Res. 14:1999;3784.
266. Li H., Bradt R.C. J. Mater. Sci. 28:1993;917.
267. Rother B., Dietrich D.A. Surf. Coat. Technol. 74-75:1995;614.
268. Gong J., Guan Z. Mater. Lett. 49:2001;180.
269. Gong J., Li Y. J. Mater. Sci. 35:2000;209.
270. Gong J. J. Mater. Sci. Lett. 19:2000;515.
271. Zhang T.-Y., Xu W.-H. J. Mater. Res. 17:2002;1715.
272. Gao Y.X., Fan H. J. Mater. Sci. 37:2002;4493.
273. Gerberich W.W., Tymiak N.I., Grunlan J.C., Horstemeryer M.F., Baskes M.I. ASME J. Appl. Mech. 69:2002;433.
274. Ni W., Cheng Y.-T., Grummon D.S. Appl. Phys. Lett. 80:2002;3310.
275. Ni W., Cheng Y.-T., Grummon D.S. Appl. Phys. Lett. 82:2003;2811.