On the significance of the H/E ratio in wear control: A nanocomposite coating approach to optimised tribological behaviour

Wear

Volumn 246, Issue 1-2, 2000, Pages 1-11

  Leyland, A ^a   Matthews, A ^a  

^a UNIVERSITY OF HULL   (United Kingdom)

Author keywords

Coating; H E; Nanocomposite; Tribology; Wear

Indexed keywords

ELASTIC MODULI; HARDNESS; NANOSTRUCTURED MATERIALS; PROTECTIVE COATINGS; TRIBOLOGY;

WEAR CONTROL;

WEAR OF MATERIALS;

COATING; COMPOSITE; HARDNESS; TRIBOLOGY; WEAR;

EID: 0034324823     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(00)00488-9     Document Type: Article

References (64)

1. Contact and rubbing of flat surfaces
2. Properties influencing wear of metals
3. The wear of metals by relatively soft abrasives
4. The relationship between the wear of carbon brush materials and their elastic moduli
5. The friction and wear of various materials sliding against unlubricated surfaces of different types and degrees of roughness
6. Surface films in tribology
7. The value of deposition processes for industrial tools
8. Structure, hardness and mechanical properties of magnetron-sputtered titanium-aluminium boride films
9. Attempt to design a strong solid
10. Strength enhancement in thin-layered A1-Cu laminates
11. Retardation of dislocation generation and motion in thin-layered metal laminates
12. Microstructure and wear behaviour of metal-containing diamond-like coatings
13. Preparation of W-C-H coatings by reactive magnetron sputtering
14. Deposition and properties of polycrystalline TiN/NbN superlattice coatings
15. New routes in the preparation of mechanically hard films
16. Investigation of superlattice coatings deposited by a combined steered-arc evaporation and unbalanced magnetron sputtering technique
17. Large-scale fabrication of hard superlattice thin films by combined steered-arc evaporation and unbalanced magnetron sputtering
18. Material selection for hard coatings
19. 2 and TiC/TiN coatings with high amounts of phase boundaries
20. Sputter deposition of ultrahard coatings within the system Ti-B-C-N
21. Evaluation of some new titanium-based ceramic coatings in tribological model wear and metal cutting tests
22. Evaluation of some titanium-based ceramic coatings on high speed steel cutting tools
23. Structure and properties of Ti-B-N coatings
24. Conventional and new approaches towards the design of novel superhard materials
25. New development in superhard coatings: The superhard nanocrystalline-amorphous composites
26. Nanocrystalline and nanocomposite CrCu and CrCu-N films prepared by magnetron sputtering
27. ZrN/Cu nanocomposite film - a novel superhard material
28. On the validity of the Hall-Petch relationship in nanocrystalline materials
29. Grain-size effects in nanocrystalline materials
30. Mechanical properties of nanophase metals
31. On the 'anomalous' hardness of nanocrystalline materials
32. Film-substrate interface stresses and their role in the tribological performance of surface coatings
33. Multi-layer and composite structures for advanced coatings
34. Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks
35. Measurement of mechanical properties by ultra-low load indentation
36. Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates
37. Elastic/plastic indentation damage in ceramics: The median/radial crack system
38. 2
39. Structure, mechanical and tribological properties of Ti-B-N and Ti-Al-B-N thin films produced by electron beam evaporation
40. Structure, mechanical and tribological properties of sputtered TiAlBN thin films
41. Deposition and characterisation of TiAlBN coatings produced by direct electron-beam evaporation of Ti and Ti-Al-B-N material from a twin crucible source
42. The effect of boron additions on the tribological behaviour of TiN coatings produced by electron-beam evaporative PVD
43. Correlation of hardness, elastic modulus and density measurements by nanoindentation and ultrasonic surface acoustic wave techniques on magnetron sputtered TiAlBN coatings
44. Wear behaviour of carbon-containing tungsten coatings prepared by reactive magnetron sputtering
45. Structure, mechanical and tribological properties of nitrogen-containing chromium coatings prepared by reactive magnetron sputtering
46. Titanium boron nitride coatings of very high hardness
47. Synthesis and properties of titanium aluminium boron nitride coatings
48. Determination of true Knoop hardness
49. The least wear
50. Structure, hardness and wear behaviour of nitrogen-containing chromiumcopper coatings
51. Mechanical properties from instrumented indentation: Uncertainties due to tip shape correction
52. The search for novel superhard materials
53. 4 nc-TiN/TiSi(x) and nc-(Ti(1-y)Al(y)Si(x))N superhard nanocomposite coatings reaching the hardness of diamond
54. Microstructure of CrN coatings produced by PVD techniques
55. A method for elastic modulus measurements of magnetron sputtered thin films dedicated to mechanical applications
56. Mechanical properties of W and W(C) thin films: Young's modulus fracture toughness and adhesion
57. Elsevier tribology series 28 D
58. Design aspects for advanced tribological surface coatings
59. Developments in PVD tribological coatings