Finite-element modeling of nanoindentation

Journal of Applied Physics

Volumn 85, Issue 3, 1999, Pages 1460-1474

  Knapp, J A ^a   Follstaedt, D M ^a   Myers, S M ^a   Barbour, J C ^a   Friedmann, T A ^a  

^a SANDIA NATIONAL LABORATORIES   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0000592102     PISSN: 00218979     EISSN: None     Source Type: Journal    
DOI: 10.1063/1.369178     Document Type: Article

References (39)

1. J. B. Pethica, R. Hutchings, and W. C. Oliver, Philos. Mag. A 48, 593 (1983).
2. M. F. Doerner and W. D. Nix, J. Mater. Res. 1, 601 (1986).
3. W. C. Oliver and G. M. Pharr, J. Mater, Res. 7, 1564 (1992).
4. G. M. Pharr and W. C. Oliver, Mater. Res. Bull. 17, 28 (1992).
5. J. C. Hay and G. M. Pharr. Mater. Res. Soc. Symp. Proc. 505, 65 (1998).
6. 0.2 was later found to be incorrect due to an error in the measurement. The correct yield strength and modulus are 1.7±0.2 and 143 ±26 GPa, respectively.
7. J. A. Knapp and D. M. Follstaedt, Mater. Res. Soc. Symp. Proc. 397, 387 (1996).
8. J. A. Knapp, D. M. Follstaedt, J. C. Barbour, and S. M. Myers, Nucl. Instrum. Methods Phys. Res. B 127/128, 935 (1997).
9. J. A. Knapp, D. M. Follstaedt, J. C. Barbour, S. M. Myers, J. W. Ager III, O. R. Monteiro, and I. G. Brown, Mater. Res. Soc. Symp. Proc. 438, 617 (1997).
10. S. M. Myers, D. M. Follstaedt, J. A. Knapp, and T. A. Christenson, Mater. Res. Soc. Symp. Proc. 444, 99 (1997).
11. S. M. Myers, J. A. Knapp, D. M. Follstaedt, and M. T. Dugger, J. Appl. Phys. 83, 1256 (1998).
12. J. A. Knapp, D. M. Follstaedt, S. M. Myers, J. C. Barbour, T. A. Friedmann, J. W. Ager III, O. R. Monteiro, and I. G. Brown. Surf. Coat. Technol. 103-104, 268 (1998).
13. T. A. Friedmann, J. P. Sullivan, J. A. Knapp, D. R. Tallant, D. M. Follstaedt, D. L. Medlin, and P. B. Mirkarimi, Appl. Phys. Lett. 71, 3820 (1997).
14. ABAQUS version 5.7, Hibbitt, Karlsson & Sorensen, Inc., Pawtucket, RI.
15. A. K. Bhattacharya and W. D. Nix, Int. J. Solids Struct. 24, 1287 (1988).
16. R. J. Bourcier, D. M. Follstaedt, M. T. Dugger, and S. M. Myers, Nucl. Instrum. Methods Phys. Res. B 59/60, 905 (1991).
17. T. A. Laursen and J. C. Simo, J. Mater. Res. 7, 618 (1992).
18. Y.-T. Cheng and C.-M. Cheng, Philos. Mag. Lett. 77, 39 (1998).
19. A. Bolshakov and G. M. Pharr, Mater. Res. Soc. Symp. Proc. 436, 189 (1997).
20. J. C. Hay, A. Bolshakov, and G. M. Pharr, Mater. Res. Soc. Symp. Proc. 522,263 (1998).
21. J. C. Hay and G. M. Pharr, Mater. Res. Soc. Symp. Proc. 522, 39 (1998).
22. All of the indentation tests shown here were performed at Nano Instruments. Inc., Knoxville, TN.
23. I. N. Sneddon, Int. J. Eng. Sci. 3, 47 (1965).
24. J. W. Harding and I. N. Sneddon, Proc. Phys. Soc. London 78, 169 (1961).
25. G. M. Pharr, W. C. Oliver, and F. R. Brotzen, J. Mater. Res. 7, 613 (1992).
26. R. B. King, Int. J. Solids Struct. 23, 1657 (1987).
27. J. A. Knapp, D. M. Follstaedt, T. A. Friedmann, A. J. Magerkurth, S. W. Clark, B. N. Lucas, and W. C. Oliver (to be published).
28. COSMOS/M, Structural Research & Analysis Corp., Los Angeles. CA.
29. Mechanical Behavior of Materials, edited by F. A. McClintock and A. S. Argon (Addison-Wesley, Reading, MA, 1966), pp. 276-279.
30. G. M. Pharr, T. Y. Tsui, A. Bolshakov, and W. C. Oliver, Mater. Res. Soc. Symp. Proc. 338, 127 (1994).
31. Atlas of Stress-Strain Curves, edited by H. E. Boyer (ASM, Metals Park, OH. 1987), p. 383.
32. D. M. Follstaedt, Nucl. Instrum. Methods Phys. Res. B 10-11, 549 (1985).
33. See Ref. 29, pp. 453-458.
34. J. Niebuhr, R. Gerber, A. Schaller, and H.-W. Müller, Physical Data of Amorphous Metals, Par B (Fachinformationszentrum Karlsruhe, Germany, 1991).
35. A. Inoue, T. Iwadachi, T. Minemura, and T. Masumoto, Trans. Jpn. Inst. Met. 22, 197 (1981).
36. S. M. Myers et al (unpublished).
37. Metals Handbook (ASM, Metals Park, OH, 1990), Vol. 2. pp. 437, 1143.
38. G. M. Pharr, A. Bolshakov, T. Y. Tsui, and J. C. Hay, Mater. Res. Soc. Symp. Proc. 505, 109 (1998).
39. C. A. Brookes, in The Properties of Natural and Synthetic Diamond, edited by J. E. Field (Academic, New York, 1992), pp. 515-546.