A review of current research on disassembly sequence generation and computer aided design for disassembly

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 217, Issue 3, 2003, Pages 299-312

  Dong, J ^a   Arndt, G ^a  

^a UNIVERSITY OF WOLLONGONG   (Australia)

Author keywords

Computer aided modelling; Disassemblability; Disassembly; Disassembly sequence generation

Indexed keywords

COMPUTER AIDED ENGINEERING; COMPUTER AIDED MANUFACTURING; COMPUTER INTEGRATED MANUFACTURING; COMPUTER SIMULATION; ENVIRONMENTAL PROTECTION; KNOWLEDGE BASED SYSTEMS; PETRI NETS; STRATEGIC PLANNING;

COMPUTER AIDED MODELLING; DISASSEMBLABILITY; DISASSEMBLY SEQUENCE GENERATION;

COMPUTER AIDED DESIGN;

EID: 0037259512     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/095440503321590479     Document Type: Article

References (84)

1. Moore, K. E., Gungor, A. and Gupta, S. M. Disassembly process planning using Petri nets. In Proceedings of ISEE International Symposium on Electronics and the Environment, 1998, pp. 88-93.
2. Garcia, M. A., Larre, A., Lopez, B. and Oller, A. Reducing the complexity of geometric selective disassembly. In Proceedings of IEEE/RSJ International Symposium on Intelligent Robots and Systems, 2000, pp. 1474-1479.
3. Wiendahl, H. P., Seliger, G., Perlewitz, H. and Burkner, S. General approach to disassembly planning and control, Prod. Planning and Control, 1999, 10(8), 718-726.
4. Mok, S. M., Wu, C. H. and Lee, D. T. A hierarchical work cell model for intelligent assembly and disassembly. In Proceedings of IEEE Symposium on Computational Intelligence in Robotics and Automation (CIRA), 1999, pp. 125-130.
5. Martinez, M., Pham, V. H. and Favrel, J. Dynamic generation of disassembly sequences. In Proceedings of IEEE Symposium on Emerging Technologies and Factory Automation (ETFA), 1997, pp. 177-182.
6. Zussman, E. Planning of disassembly system. Assembly Automn, 1995, 15(4), 20-23.
7. Lee, K. M., Kuren, B. V. and Martin, M. Modelling and supervisory control of a disassembly automation workfellow based on blocking topology. IEEE Trans., Robotics and Automn, 2000, 16(1), 67-77.
8. Kotera, Y. and Sato, S. An integrated recycling process for electric home appliances. Mitsubishi Electric Advance, 1997, 804, 23-26.
9. Zuo, B. R., Stenzel, A. and Seliger, G. Flexible handling in disassembly with screw nail indentation. In Proceedings of IEEE International Conference on Robotics and Automation, 2000, Vol. 4, pp. 3681-3686.
10. Zhang, H. C. and Kuo, T. C. A graph-based approach to disassembly model for end-of-life product recycling. In Proceedings of IEEE/CPMT Symposium on International Electronics Manufacturing Technology, 1996, pp. 247-254.
11. Jovane, F., Alting, L., Armillotta, A., Eversheim, W., Feldmann, K., Seliger, G. and Roth, N. Key issue in product life cycle: disassembly. Ann. CIRP, 1993, 42(2), 165-658.
12. Salomonski, N. and Zussman, E. On-line predictive mode for disassembly process planning adaptation. Robotics and Computer-Integrated Mfg, 1999, 15(1), 211-220.
13. Gupta, S. M. and Gungor, A. Product recovery using a disassembly line: changes and solution. In Proceedings of IEEE International Symposium on Electronics and the Environment, 2001, pp. 36-40.
14. Zussman, E. and Zhou, M. C. A methodology for modelling and adaptive planning of disassembly processes. IEEE Trans., Robotics and Automn, 1999, 15(1), 190-194.
15. Zussman, E., Zhou, M. C. and Caudill, R. Disassembly Petri net approach to modelling and planning disassembly processes of electronic products. In Proceedings of IEEE International Symposium on Electronics and the Environment, 1998, pp. 331-336.
16. Steinhilper, R. Remanufacturing-The Ultimate Form of Recycling, 1998 (Fraunhofer IRB Verlag, Germany).
17. Imamura, S., Masaki, H. and Nakazawa, Y. Disassembly planning for machine maintenance with multi-agent cooperation. In Proceedings of IEEE International Symposium on Assembly and Task Planning, 2001, pp. 214-219.
18. Subramani, A. K. and Dewhurst, P. Automatic generation of product disassembly sequences. Ann. CIRP, 1991, 40(1), 115-118.
19. Boks, C. B., Brouwers, W. C. J., Kroll, E. and Stevels, A. L. N. Disassembly modelling: two applications to a Philips 21″ television set. In Proceedings of IEEE International Symposium on Electronics and the Environment, 1996, pp. 224-229.
20. Lambert, A. J. D. Optimal disassembly of complex products. Int. J. Prod. Res., 1997, 15(9), 2509-2523.
21. Wiendahl, H. P., Scholz-Reiter, B., Burkner, S. and Scharke, H. Flexible disassembly systems: layouts and modules for processing obsolete products. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2001, 215(B5), 723-732.
22. Uhlmann, E., Spur, G. and Elbing, F. Development of flexible automatic disassembly processes and cleaning technologies for the recycling of consumer goods. In Proceedings of IEEE International Symposium on Assembly and Task Planning, 2001, pp. 442-446.
23. O'Shea, B., Kaebernick, H., Grewal, S. S., Perlewitz, H., Muller, K. and Seliger, G. Method for automatic tool selection for disassembly planning. Assembly Automn, 1999, 19(1), 47-54.
24. Koyachi, N., Arai, T., Adachi, H. and Itoh, Y. Integrated limb mechanism of manipulation and locomotion for disassembling robot: basic concept for control and mechanism. In Proceedings of IEEE International Symposium on Advanced Robotics, 1993, pp. 81-84.
25. Lee, K. and Gadh, R. Computer aided design for disassembly: a destructive approach. In Proceedings of IEEE International Symposium on Electronics and the Environment, 1996, pp. 173-178.
26. Touzanne, F., Henrioud, J. M. and Perrard, C. Method of disassembly sequence generation for recycling system design. In IEEE Proceedings on Assembly and Task Planning, 2001, pp. 458-463.
27. Lee, D. H., Kang, J. G. and Xirouchakis, P. Disassembly planning and scheduling: review and further research. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2001, 215(B5), 695-709.
28. Studny, D., Rittel, D. and Zussman, E. Impact fracture of screw for disassembly. Trans. ASME, J. Mfg Sci. Engng, 1999, 121(1), 118-126.
29. Feldmann, K., Trautner, S. and Meedt, O. Innovative disassembly strategies based on flexible partial destructive tools. In Proceedings of IFAC International Federation of Automatic Control Workshop on Intelligent Assembly and Disassembly, 1998, pp. 1-6.
30. Kroll, E. and Beardsley, B. A methodology to evaluate ease of disassembly for product recycling. IIE Trans. Inst. Ind. Engng, 1996, 28(10), 837-845.
31. Kroll, E. and Carver, B. S. Disassembly analysis through time estimation and other metrics. Robotics and Computer-Integrated Mfg, 1999, 15(3), 191-200.
32. Suga, T., Sanashige, K. and Fujimoto, J. Quantitative disassembly evaluation. In Proceedings of IEEE International Symposium on Electronics and the Environment, 1996, pp. 19-24.
33. Mok, H. S., Kim, H. J. and Moon, K. S. Disassemblability of mechanical parts in automobile for recycling. Computer and Ind. Engng, 1997, 33(3-4), 621-624.
34. Murayama, T. and Oba, F. Disassembly/assembly path search reusing solutions. In Proceedings of IEEE Symposium on Emerging Technologies and Factory Automation (ETFA), 1997, pp. 183-188.
35. Feldmann, K., Trautner, S., Lohrmann, H. and Melzer, K. Computer-based product structure analysis for technical goods regarding optimal end-of-life strategies. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2001, 215(B5), 684-693.
36. Moore, K. E., Gungor, A. and Gupta, S. M. Petri net approach to disassembly process planning. Computers and Ind. Engng, 1998, 35(1-2), 165-168.
37. Tang, Y., Zhou, M. C., Zussman, E. and Caudill, R. Disassembly modelling, planning, and application: a review. In Proceedings of IEEE International Conference on Robotics and Automation, 2000, Vol. 3, pp. 2197-2202.
38. Penev, K. D. and Ron, A. J. Determination of a disassembly strategy. Int. J. Prod. Res., 1996, 34(2), 495-506.
39. Zhang, H. C. and Kuo, T. C. A graph-based disassembly sequence planning for EOL product recycling. In Proceedings of the Twenty-First IEEE International Symposium on Electronics Manufacturing Technology, 1997, pp. 140-151.
40. Murayama, T., Kagawa, K. and Oba, F. Computer-aided redesign for improving recyclability. In Proceedings of First EcoDesign International Symposium on Environmentally Conscious Design and Inverse Manufacturing, 1999, pp. 746-751.
41. Perlewitz, H., Muller, K. and Seliger, G. Usage mode and effective analysis to support disassembly process planning. In Proceedings of IFAC International Federation of Automatic Control Workshop on Intelligent Assembly and Disassembly, 1998, pp. 59-64.
42. Homen de Mello, L. S. and Sanderson, A. C. A correct and complete algorithm for the generation of mechanical assembly sequences. IEEE Trans., Robotics and Automn, 1991, 7(2), 228-240.
43. Zussman, E., Kriwet, A. and Seliger, G. Disassembly-oriented assessment methodology to support design for recycling. Ann. CIRP, 1994, 43(1), 9-14.
44. Murayama, T., Oba, F., Abe, S. and Yamamichi, Y. Disassembly sequence generation using information entropy and heuristics for component replacement. In Proceedings of IEEE International Symposium on Assembly and Task Planning, 2001, pp. 208-213.
45. Kaebernick, H., O'Shea, B. and Grewal, S. A method for sequencing the disassembly of products. Ann. CIRP, 2000, 49(1), 13-16.
46. O'Shea, B., Kaebernick, H. and Grewal, S. Using a cluster graph representation of products for application in the disassembly planning process. Concurrent Engng: Res. Applic., 2000, 8(3), 158-170.
47. Kanai, S., Sasaki, R. and Kishinami, T. Graph-based information modelling of product-process interaction for disassembly and recycle planning. In Proceedings of First EcoDesign International Symposium on Environmentally Conscious Design and Inverse Manufacturing, 1999, pp. 772-777.
48. Kanai, S., Sasaki, R. and Kishinami, T. Representation of product and process for planning disassembly, shredding, and material sorting based on graphs. In Proceedings of IEEE International Symposium on Assembly and Task Planning, 1999, pp. 123-128.
49. Tang, Y., Zhou, M. C. and Caudill, R. J. An integrated approach to disassembly planning and demanufacturing operation. In Proceedings of ISEE International Symposium on Electronics and the Environment, 2000, pp. 354-359.
50. Kashiwa, K. I., Mitani, T., Tezuka, T. and Yoshikawa, H. Development of machine-maintenance training system in virtual environment. In Proceedings of IEEE International Workshop on Robotic and Human Communication, 1995, pp. 295-300.
51. Suzuki, T., Zanma, T., Inaba, A. and Okuma, S. Learning control of disassembly Petri net-an approach with discrete event system theory. In Proceedings of IEEE International Conference on Robotics and Automation, 1996, pp. 184-191.
52. Peterson, J. L. Petri Net Theory and the Modelling of Systems, 1981 (Prentice-Hall, Englewood Cliffs, New Jersey).
53. Zussman, E. and Zhou, M. C. Design and implementation of an adaptive process planner for disassembly processes. IEEE Trans., Robotics and Automn, 2000, 16(2), 171-179.
54. Moore, K. E., Gungor, A. and Gupta, S. M. Disassembly Petri net generation in the process of XOR precedence relationships. In Proceedings of IEEE International Conference on System, Man and Cybernetics, 1998, pp. 13-18.
55. Cselenyi, J. and Banyai, T. Modelling of stochastic part-ordering system served by mobile robots. In Proceedings of IFAC International Federation of Automatic Control Workshop on Intelligent Assembly and Disassembly, 1998, pp. 65-70.
56. Fernandez, R. and Zerhouni, N. Modelling and analysis of disassembly system using continuous Petri nets. In Proceedings of IEEE International Symposium on Assembly and Task Planning, 2001, pp. 232-237.
57. Srinivasan, H. and Gadh, R. Complexity reduction in geometric selective disassembly using the wave propagation abstraction. In Proceedings of IEEE International Conference on Robotics and Automation, 1998, pp. 1478-1483.
58. Srinivasan, H. and Gadh, R. Selective disassembly: representation and comparative analysis of wave propagation abstractions in sequence planning. In Proceedings of IEEE International Symposium on Assembly and Task Planning, 1999, pp. 129-134.
59. Srinivasan, H. and Gadh, R. Efficient geometric disassembly of multiple components from an assembly using wave propagation. J. Mech. Des., 2000, 122, 179-184.
60. Lee, K. and Gadh, R. Destructive disassembly to support virtual prototyping. IIE Trans., Inst. Ind. Engrs, 1998, 30(10), 959-972.
61. Shyamsundar, N. and Gadh, R. Geometric abstractions to support disassembly analysis. IIE Trans., Inst. Ind. Engrs, 1999, 31(10), 935-946.
62. Gungor, A. and Gupta, S. M. Disassembly sequence planning for products with defective parts in product recovery. Computers and Ind. Engng, 1998, 35(1-2), 161-164.
63. Hsu, H. Y. and Lin, G. C. I. An accessibility based approach for design for disassembly applications. In Proceedings of 8th ICME International Conference on Manufacturing Engineering, 2000, pp. 463-467.
64. Lee, S. and Moradi, H. Disassembly sequencing and assembly sequence verification using force flow networks. In Proceedings of IEEE International Conference on Robotics and Automation, 1999, pp. 2762-2767.
65. Zeid, I., Gupta, S. M. and Bardasz, T. A case-based reasoning approach to planning for disassembly, J. Intell. Mfg. 1997, 8(2), 97-106.
66. Zeid, I., Gupta, S. M. and Bardasz, T. An analogical problem solving approach to planning for disassembly. In Design for Manufacturing and Assembly, 1996, Vol. 89, pp. 79-88 (American Society of Mechanical Engineers, Design Engineering Division, New York).
67. Arai, E. and Iwata, K. CAD system with product assembly/disassembly planning function. Robotics and Computer-Integrated Mfg, 1993, 10(1/2), 41-48.
68. Rosen, D. W., Bras, B., Mistree, F. and Goel, A. Virtual prototyping for product demanufacture and service using a virtual design approach. In Proceedings of the Computers in Engineering ASME Database Symposium, 1995, pp. 951-958.
69. Shyamsundar, N. and Gadh, R. Selective disassembly of virtual prototypes. In Proceedings of IEEE International Conference on System, Man and Cybernetics, 1996, 4, 3159-3164.
70. Srinivasan, H., Shyamundar, N. and Gadh, R. Framework for virtual disassembly analysis. J. Intell. Mfg, 1997, 8(4), 277-295.
71. Siddique, Z. and Rosen, D. W. Virtual prototyping approach to product disassembly reasoning. Computer-Aided Des., 1997, 29(12), 847-860.
72. Gadh, R., Srinivasan, H., Nuggehalli, S. and Figueroa, R. Virtual disassembly-a software tool for developing product dismantling and maintenance system. In Proceedings of IEEE Symposium Annals on Reliability and Maintainability, 1998, pp. 120-125.
73. Srinivasan, H., Figueroa, R. and Gadh, R. Selective disassembly for virtual prototyping as applied to de-manufacturing. Robotics and Computer-Integrated Mfg, 1999, 15(1), 231-245.
74. Vujosevic, R., Raskar, R., Yetukuri, N. V., Jothisankar, M. C. and Juang, S. H. Simulation, animation, and analysis of design disassembly for maintainability analysis. Int. J. Prod. Res., 1995, 33(11), 2999-3022.
75. Gutierrez, T., Barbero, J. I. and Eguidazu, A. Virtual assembly and disassembly simulation. in Proceedings of IFAC International Federation of Automatic Control Workshop on Intelligent Assembly and Disassembly, 1998, pp. 35-40.
76. Sandborn, P. A. and Murphy, C. F. A model for optimising the assembly and disassembly of electronic systems. IEEE Trans., Electronics Packaging Mfg, 1999, 22(2), 105-117.
77. Mok, S. M., Wu, C. H. and Lee, D. T. Modelling automatic assembly and disassembly operations for virtual manufacturing. IEEE Trans., Systems, Man and Cybernetics, Part A, 2001, 31(3), 223-232.
78. Uhlmann, E., Seliger, G., Haertwig, J. P. and Keil, T. Pilot disassembly system. Prod. Engng, 2001, 8(1), 83-88.
79. Mascle, C. and Figour, J. Methodology approach of sequences determination using the disassembly method. In Proceedings of IEEE International Symposium on Electronics and the Environment, 1990, pp. 139-144.
80. Grewal, S., Tran, P. and Bhaskare, A. Assembly planning software. Ann. CIRP, 1995, 44(1), 1-6.
81. Grewal, S. Integrated part and assembly planning. In Proceedings of IEEE International Symposium on Assembly and Task Planning, 1997, pp. 36-41.
82. Geiger, D. and Zussman, E. Probabilistic reactive disassembly planning. Ann. CIRP, 1996, 45(1), 49-52.
83. Cser, L. and Garamvolgyi, E. Object oriented disassembly design. In Proceedings of IFAC International Federation of Automatic Control Workshop on Intelligent Assembly and Disassembly, 1998, pp. 59-64.
84. Erdos, G. and Xirouchakis, P. Extended Petri net modelling for re-manufacturing line simulation. In Proceedings of First EcoDesign International Symposium on Environmentally Conscious Design and Inverse Manufacturing, 1999, pp. 83-88.