Wear behavior and work hardening of high strength steels in high stress abrasion

Wear

Volumn 322-323, Issue , 2015, Pages 32-40

  Lindroos, Matti ^a   Valtonen, Kati ^a   Kemppainen, Anu ^b   Laukkanen, Anssi ^c   Holmberg, Kenneth ^c   Kuokkala, Veli Tapani ^a  

^a TAMPERE UNIVERSITY OF TECHNOLOGY   (Finland)

^b Raahe Steelworks   (Finland)

^c VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

Author keywords

Abrasive wear; High strength steels; Scratch testing; Work hardening

Indexed keywords

ABRASION; EROSION; HIGH SPEED STEEL; STRAIN HARDENING; SURFACE HARDENING; WEAR RESISTANCE;

HIGH STRESS; INITIAL STATE; MATERIAL REMOVAL; SCRATCH TESTING; SURFACE LOADING; WEAR BEHAVIORS; WEAR RATES; WEAR RESISTANT;

HIGH STRENGTH STEEL;

EID: 84910674385     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2014.10.018     Document Type: Article

References (29)

1. Gates J.D., Gore G.J., Hermand M.J.-P., Guerineau M.J.-P., Martin P.B., Saad J. The meaning of high stress abrasion and its application in white cast irons. Wear 2007, 263:6-35.
2. Bressan J.D., Daros D.P., Sokolowski A., Mesquita R.A., Barbosa C.A. Influence of hardness on the wear resistance of 17-4 PH stainless steel evaluated by the pin-on-disc testing. J. Mater. Process. Technol. 2008, 205:353-359.
3. Das Bakeshi S., Shipway P.H., Bhadeshia H.K.D.H. Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite. Wear 2013, 308:46-53.
4. De Pellegrin D.V., Torrance A.A., Haran E. Wear mechanisms and scale effects in two-body abrasion. Wear 2009, 266:13-20.
5. Sun D., Wharton J.A., Wood R.J.K. Micro-abrasion mechanisms of cast CoCrMo in simulated body fluids. Wear 2009, 267:1845-1855.
6. Qu J., Blau P.J., Watkins T.R., Cabin O.B., Kulkarni N.S. Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces. Wear 2005, 258:1348-1356.
7. Woldman M., Van Der Heide E., Tinga T., Masen M.A. The influence of abrasive body dimensions on single asperity wear. Wear 2013, 301:76-81.
8. Williams J.A. Analytical models of scratch hardness. Tribol. Int. 1996, 29(8):675-694.
9. ASTM G171, Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus, 2009.
10. Brookes C.A., Green P., Harrison P.H., Moxley B. Come observations on scratch and indetation hardness measurements. J. Phys. D: Appl. Phys. 1972, 5:1284-1295.
11. Rendon J., Olsson M. Abrasive wear resistance of some commercial abrasion resistant steels evaluated by laboratory test methods. Wear 2009, 267:2055-2061.
12. Zum-Gahr K.H. Microstructure and Wear of Materials 1987, 10. (Tribology Series), Elsevier, Amsterdam, The Netherlands.
13. Podgornik B., Hogmark S., Sandberg O., Leskovsek V. Wear resistance and anti-sticking properties of duplex treated forming tool steel. Wear 2003, 254:1113-1121.
14. Hokkirigawa K., Kato K. An experimental and theoretical investigation of ploughing,cutting and wedge formation during abrasive wear. Tribol. Int. 1988, 21:51-57.
15. Holmberg K., Laukkanen A., Ronkainen H., Wallin K., Varjus S., Koskinen J. Tribological contact analysis of a rigid ball sliding on a hard coated surface. Part I: Modelling stresses and strains. Surf. Coat. Technol. 2006, 200:3793-3809.
16. Garrison W.M. Abrasive wear resistance: the effect of ploughing and the removal of ploughed material. Wear 1986, 114:239-247.
17. Adachi K., Hutchings I.M. Wear-mode mapping for the micro-scale abrasion test. Wear 2003, 255:23-29.
18. Modi O.P., Pandit P., Mondal D.P., Prasad B.K., Yegneswaran A.H., Chrysanthou A. High-stress abrasive wear response of 0.2% carbon dual phase steel: effects of microstructural features and experimental conditions. Mater. Sci. Eng. A 2007, 458:303-311.
19. Kinnunen E., Miettunen I., Somani M., Porter D., Karjalainen P., Alamattila I., Kemppainen A., Liimatainen T., Ratia V. Development of a new direct quenched abrasion resistant steel. Int. J. Metall. Eng. 2013, 01:27-34.
20. Prawmoto Y., Jasmawati N., Sumera K. Effect of prior austenite grain size on the morphology and mechanical properties of martensite in medium carbon steel. J. Mater. Sci. Technol.. 5 2012, 28:461-466.
21. Wang C., Wang M., Shi J., Hui W., Dong H. Effect of microstructure refinement on the strength and toughness of low alloy martensitic steel. J. Mater. Sci. Technol. 2007, 23(5):659-664.
22. Morito S., Yoshida H., Maki T., Huang X. Effect of block size on the strength of lath martensite in low carbon steels. Mater. Sci. Eng. A 2006, 438-440:237-240.
23. Krauss G. Martensite in steel: strength and structure. Mater. Sci. Eng. A 1999, 273-275:40-57.
24. Wang C., Wang M., Shi J., Hui W., Dong H. Effect of microstructural refinement on the toughness of low carbon martensitic steel. Scr. Mater. 2008, 58:492-495.
25. Shanthraj P., Zikry M.A. Optimal microstructures for martensitic steels. J. Mater. Res. 2012, 27(12):1598-1611.
26. Ratia V., Miettunen I., Kuokkala V.-T. Surface deformation of steels in impact-abrasion: the effect of sample angle and test duration. Wear 2013, 301:94-101.
27. Ratia V., Valtonen K., Kuokkala V.-T. Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol. 2013, 6:S1-S10.
28. Venkataraman B., Sundararajan G. Correlation between the characteristics of mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and Al-MMCs. Wear 2000, 245(1-2):22-38.
29. Kato K. Abrasive wear of metals. Tribol. Int. 1997, 30(5):333-338.