Comparison of three-body impact abrasive wear behaviors for quenching-partitioning-tempering and quenching-tempering 20Si2Ni3 steels

Wear

Volumn 362-363, Issue , 2016, Pages 121-128

  Wang, Cunyu ^a   Li, Xiaodong ^b   Chang, Ying ^b,c   Han, Shuo ^b   Dong, Han ^a  

^a CENTRAL IRON AND STEEL RESEARCH INSTITUTE   (China)

^b DALIAN UNIVERSITY OF TECHNOLOGY   (China)

^c NONE   (China)

Author keywords

Hardness; Heat treatment; Impact abrasive wear; Steel; Three body

Indexed keywords

ABRASION; ABRASIVES; FATIGUE CRACK PROPAGATION; HARDENING; HARDNESS; HEAT TREATMENT; QUENCHING; STEEL; STRAIN HARDENING; TEMPERING; WEAR OF MATERIALS;

HARDENED LAYERS; HIGH IMPACT ENERGY; IMPACT ABRASIVE WEAR; IMPACT ENERGY; LOW IMPACT ENERGY; QUENCHING-PARTITIONING-TEMPERING; THREE BODY; WEAR CHARACTERISTICS;

WEAR RESISTANCE;

EID: 84973560631     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2016.05.026     Document Type: Article

References (25)

1. Ratia V., Miettunen I., Kuokkala V.T. Surface deformation of steels in impact-abrasion: the effect of sample angle and test duration. Wear 2013, 301:94-101.
2. Zeng D., Lu L., Zhang N., Gong Y., Zhang J. Effect of different strengthening methods on rolling/sliding wear of ferrite-pearlite steel. Wear 2016, 358-359:62-71.
3. Colaco R., Vilar R. On the influence of retained austenite in the abrasive wear behavior of a laser surface melted tool steel. Wear 2005, 258:225-231.
4. Ding H.H., He C.G., Ma L., Guo J., Liu Q.Y., Wang W.J. Wear mapping and transitions in wheel and rail materials under different contact pressure and sliding velocity conditions. Wear 2016, 352-353:1-8.
5. Moghaddam E.G., Karimzadeh N., Varahram N., Davami P. Impact-abrasion wear characteristics of in-situ VC-reinforced austenitic steel matrix composite. Mater. Sci. Eng. A 2013, 585:422-429.
6. Narayanaswamy B., Hodgson P., Beladi H. Comparisons of the two-body abrasive wear behaviour of four different ferrous microstructures with similar hardness levels. Wear 2016, 350-351:155-165.
7. Zhang D., Beeley P.R., Baker A.J. The design of an impact abrasion testing machine. Wear 1994, 173:59-64.
8. Lindroos M., Valtonen K., Kemppainen A., Laukkanen A., Holmberg K., Kuokkala V. Wear behavior and work hardening of high strength steels in high stress abrasion. Wear 2015, 322-323:32-40.
9. Coello J., Miguel V., Martinez A., Avellaneda F.J., Calatayud A. Friction behavior evaluation of an EBT zinc-coated trip 700 steel sheet through flat friction tests. Wear 2013, 305:129-139.
10. Abbasi M., Kheirandish S., Kharrazi Y., Hejazi J. The fracture and plastic deformation of aluminum alloyed Hadfield steels. Mater. Sci. Eng. A 2009, 513-514:72-76.
11. Aribo S., Alaneme K.K., Folorunso D.O., Aramide F.O. Effect of precipitation hardening on hardness and microstructure of austenitic manganese steel. J. Miner. Mater. Charact. Eng. 2010, 9:157-164.
12. Shirdel M., Mirzadeh H., Parsa M.H. Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: mechanisms, microstructures, mechanical properties, and TRIP effect. Mater. Charact. 2015, 103:150-161.
13. Zhao Z.Z., Yin H.X., Zhao A.M., Gong Z.Q., He J.G., Tong T.T., Hu H.J. The influence of the austempering temperature on the transformation behavior and properties of ultra-high-trength TRIP-aided bainitic-ferritic sheet steel. Mater. Sci. Eng. A 2014, 613:8-16.
14. Yab J., Liss K.D., Timokhina I.B., Pereloma E.V. In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel. Mater. Sci. Eng. A 2016, 662:185-197.
15. Bhadeshia H.K.D.H., Honeycombe R.W.K. Steels: Microstructure and Properties 2006, Elsevier, UK. 3rd ed.
16. Krauss G. Steels: Processing, Structure, and Performance 2008, ASM Inter., USA.
17. Speer J.G., Matlock D.K., De Cooman B.C., Schroth J.G. Carbon partitioning into austenite after martensite transformation. Acta Mater. 2003, 51:2611-2622.
18. Xu Z.Y. Design of structure, composition and heat treatment process for high strength steel. Mater. Sci. Forum 2007, 561-565:2283-2286.
19. De Moor E., Lacroix S., Clarke A.J., Penning J., Speer J.G. Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels. Metall. Mater. Trans. A 2008, 39:2586-2595.
20. Efremenko V.G., Shimizu K., Noguchi T., Efremenko A.V., Chabak Yu.G. Impact-abrasive-corrosion wear of Fe-based alloys: Influence of microstructure and chemical composition upon wear resistance. Wear 2013, 305:155-165.
21. Pierce D.T., Coughlin D.R., Willianson D.L., Clarke K.D., Clarke A.J., Speer J.G., De Moor E. Characterization of transition carbides in quench and partitioned steel microstructures by Mössbauer spectroscopy and complementary techniques. Acta Mater. 2015, 90:417-430.
22. Xu X., van der Zwaag S., Xu W. The scratch and abrasive wear behaviour of a tempered martensitic construction steel and its dual phase variants. Wear 2016, 358-359:80-88.
23. C.F. Wang, Investigation on microstructural unit controlling the strength and toughness in low alloy martensitic steel, Doctor Thesis, Central Iron Steel Research Institute, 2008.
24. Koistinen D.P., Marburger R.E. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steel. Acta Metall. 1959, 7:59-60.
25. Das Bakshi S., Shipway P.H., Bhadeshia H.K.D.H. Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite. Wear 2013, 308:46-53.