Ba(Ti,Zr)O3 - Functional materials: From nanopowders to bulk ceramics

Ba(Ti,Zr)O(-3) - Functional Materials: From Nanopowders to Bulk Ceramics

Volumn , Issue , 2010, Pages 1-99

  Ianculescu, Adelina ^a   Mitoseriu, Liliana ^b  

^a UNIVERSITY POLITEHNICA OF BUCHAREST   (Romania)

^b Cuza University   (Romania)

Author keywords

[No Author keywords available]

Indexed keywords

BARIUM COMPOUNDS; COPRECIPITATION; FUNCTIONAL MATERIALS; NANOSTRUCTURED MATERIALS; OXALIC ACID; REVIEWS; SOLID STATE REACTIONS; SOLS; THERMOANALYSIS; TITANIUM COMPOUNDS; ZIRCONIUM COMPOUNDS;

BOOK REVIEWS; BULK CERAMICS; FORMATION KINETICS; MODIFIED PECHINI METHOD; OXALATE ROUTES; PRECIPITATION SYNTHESIS; THERMAL TREATMENT TEMPERATURE; WET CHEMICAL TECHNIQUES;

SOLID SOLUTIONS;

EID: 85016624280     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (170)

1. A. Rae, M. Chu, V. Ganine, “Barium titanate - Past, present and future”, pp. 1-12 in Ceram. Trans. 2007, vol. 100, Dielectric Ceramic Materials, Ed. by K.M. Nair, A.S. Bhalla, The American Ceramic Society, Westerville, OH, 1999.
2. X. Ren, “Large electric-field-induced strain in ferroelectric crystals by point-defect-mediated reversible domain switching”, Nat. Mater., 3 (2004) 91-94.
3. M.E. Lines, A.M. Glass, Principles and applications of ferroelectrics and related materials, Clarendon, Oxford, 1977.
4. G.H. Haertling, “Ferroelectric Ceramics: History and Technology”, J. Am. Ceram. Soc., 82 (1999) 797-818.
5. J.M. Wilson, “Barium titanate”, Am. Ceram. Soc. Bull., 74 (1995) 106-110.
6. 3 structures for stress-sensing applications”, J. Am. Ceram. Soc., 78 (1995) 2476-2480.
7. T.G. Reynod III, “Application Space Influences. Electronic Ceramic Materials”, Am. Ceram. Soc. Bull., 80 (2001) 29-33.
8. C.A. Randall, “Scientific and Engineering Issues of the State-of-the-Art and Future Multilayer Capacitors”, J. Ceram. Soc. Japan, 109 (2001) S2-S6.
9. K. Uchino, Ferroelectric devices, Marcel Dekker, Inc., New York, 2000.
10. 3", J. Eur. Solid State Inorg. Chem., 34 (1997) 1199-1209.
11. 3 ceramics: evidences of the grain boundary phenomena”, J. Optoelectron. Adv. Mater., 10 (2008) 1843-1846.
12. 3 ceramics with relaxor properties”, J. Optoelectron. Adv. Mater., 27 (2007) 4061-4064.
13. 3Ceramics”, J. Optoelectron. Adv. Mater., 8 (2006) 944-948.
14. 3", J. Phys. D: Appl. Phys., 40 (2007) 2936-2940.
15. V. Müller, H. Beige, H.-P. Abicht, “Non-Debye dielectric dispersion of barium titanate stannate in the relaxor”, and diffuse phase-transition state”, Appl. Phys. Lett., 84 (2004) 1341-1343.
16. 3 ceramics: An intermediate state between ferroelectric and relaxor behavior”, J. Appl. Phys., 99 (2006) 124111.
17. X. Wei, X. Yao, “Preparation, structure and dielectric property of barium stannate titanate ceramics”, Mater. Sci. Eng. B, 137 (2007) 184-188.
18. X. Wei, Y. Feng, X. Wan, X. Yao, “Evolvement of dielectric relaxation of barium stannate titanate ceramics”, Ceram. Int., 30 (2004) 1397-1400.
19. X. Wei, Y. Feng, X. Wan, X. Yao, “Dielectric properties of barium stannate titanate ceramics under bias field”, Ceram. Int., 30 (2004) 1401-1404.
20. 3functionally graded materials”, J. Eur. Ceram. Soc., 29 (2009) 2309-2316.
21. H.Y. Tian, Y. Wang, J. Miao, H.L.W. Chan, C.L. Choy, “Preparation and characterization of hafnium doped barium titanate ceramics”, J. Alloy Compd., 431 (2007) 197-202.
22. 3 ceramics”, J. Phys.: Condens. Matter., 18 (2006) 3455-3468.
23. S. Anwar, P R Sagdeo, N P Lalla, “Ferroelectric relaxor behavior in hafnium doped barium-titanate ceramic”, Solid State Commun., 138 (2006) 331-336.
24. 3 (0.20 ≤ x ≤ 0.30) ceramics”, Solid State Sci., 9 (2007) 1054-1060.
25. 3 ceramics”, Mater. Res. Bull., 43 (2008) 1761-1769.
26. 3" J. Solid State Chem. 123 (1996) 30-38.
27. 3 Ceramics”, J. Eur. Ceram. Soc., 17 (1997) 1217-1221.
28. D. K. Hennings, B. Schreinemacher, H. Schreinemacher, “High Permittivity Ceramics with High Endurance”, J. Eur. Ceram. Soc., 13 (1994) 81-88.
29. 2", J. Am. Ceram. Soc., 41 (1958) 390-394.
30. 3 system” Sov. Phys. - Crystallogr. (Engl. Transl.), 3 (1958) 182-192.
31. R. C. Kell, N. J. Hellicar, “Structural Transitions in Barium Titanate-.Zirconate Transducer Materials”, Acustica, 6 (1956) 235-238.
32. E. J. Brajer, Polycrystalline Ceramic Materials. U.S. Pat, 1955, No. 2708 243.
33. F. Kulscar, Fired Ceramic Barium Titanate Body U.S. Pat, 1956, No. 2735 024.
34. 3 Ceramics”, J. Am. Ceram. Soc., 65 (1982) 539-544.
35. 3 ceramics”, J. Appl. Phys., 92 (2002) 1489-1493.
36. A. Simon, J. Ravez, M. Maglione, “The crossover from a ferroelectric to a relaxor state in lead-free solid solutions”, J. Phys. Condens. Matter., 16 (2004) 963-970.
37. 3 Relaxor Ferroelectric Ceramics”, Acta Mater. 52 (2004) 5177-5183.
38. 3 ceramics prepared by different techniques”, Proc. Appl. Ceram., 2 (2008) 81-88.
39. 3ferroelectric ceramics”, J. Optoelectron. Adv. Mater., 10 (2008) 1894-1897.
40. 3-based ceramics: Modeling and experimental study”, J. Optoelectron. Adv. Mater., 10 (2008) 1792-1795.
41. 3 ceramics under dc electric field”, Appl. Phys. Lett., 81 (2002) 1285-1287.
42. 3 thin films grown by a sol-gel process”, Appl. Phys. Lett., 84 (2004) 3136-3138.
43. 3Ceramics”, Solid State Commun., 131 (2004) 163-168.
44. 3 compositions: influence of electric field”, Solid State Commun., 113 (1999) 77-82.
45. 3", Phys. Rev. B, 69 (2004) 092104.
46. 3", Phys. Rev. B, 74 (2006) 132101.
47. 3 solid solutions with a quasiferroelectric state”, J. Appl. Phys., 104 (2008) 034108.
48. 3 Solid Solution”, Ferroelectrics, 337 (2006) 169-178.
49. 3 relaxor: dielectric spectroscopy evidence”, J. Phys.: Condens. Matter. 19 (2007) 092001.
50. P.W. Rehrig, S.E. Park, S.T. McKinstry, G.L. Messing, B. Jones, T.M. Shrout, “Piezoelectric properties of zirconium-doped barium titanate single crystals grown by templated grain growth”, J. Appl. Phys., 86 (1999) 1657-1661.
51. 3 single crystals by the laser heated pedestal growth technique”, J. Cryst. Growth, 233 (2001) 460-465.
52. 3single crystals” J. Appl. Phys., 88 (2000) 410-415.
53. 3 single crystals”, Appl. Phys. Lett., 77 (2000) 1535-1537.
54. S. Wada, S. Suzuki, T. Noma, M. Kakihana, S.E. Park, L.E. Cross, T.R Shrout, “Enhanced Piezoelectric Property of Barium Titanate Single Crystals with Engineered Domain Configurations”, Jpn. J. Appl. Phys., Part 1, 38 (1999) 5505-5511.
55. 3thin films obtained from the soft chemical method”, Mater. Chem. Phys., 105 (2007) 293-297.
56. 3 substrates”, J. Phys. D: Appl. Phys., 40 (2007) 4701-4706.
57. 3thin films obtained by a soft chemical spin-coating technique”, J. Appl. Phys., 96 (2004) 4386-4391.
58. 3sputtered thin films: effect of the sputtering conditions”, Thin Solid Films, 467 (2004) 54-58.
59. 3 sputtered thin films: effect of the sputtering conditions”, Thin solid films, 467 (2004) 54-58.
60. T. M. Shaw, S. Trolier-McKinstry, P. C. McIntyre, “The Properties of Ferroelectric Films at Small Dimensions”, Annu. Rev. Mater. Sci., 30 (2000) 263-298.
61. A. Dixit, S. B. Majumder, P. S. Dobal, R. S. Katiyard, A. S. Bhalla, “Phase transition studies of sol-gel deposited barium zirconate titanate thin films”, Thin Solid Films, 447-448 (2004) 284-288.
62. 3solid solution through solid-oxide reaction”, Mater. Lett., 59 (2005), 135-138.
63. 3 Perovskites: Effect of Vacancy Supersaturation”, J. Am. Cerm. Soc., 82 (1999) 2887-2899.
64. 3-Based Ferroelectrics for Capacitor Applications”, J. Am. Ceram. Soc., 84 (2001) 759-766.
65. 3 ceramics with different grain sizes”, Phase Transit., 79 (2006) 389-397.
66. 3 solid solutions”, J. Mater. Sci., 23 (1988) 3973-3980.
67. 3 ferroelectric ceramics”, Solid State Commun., 136 (2005) 89-93.
68. 3 ceramics”, Solid State Commun., 131 (2004) 163-168.
69. 3 Oxides via Single-Source Alkoxide Precursors and Semi-Alkoxide Routes”, J. Sol-Gel Sci. Technol., 17 (2000) 145-158.
70. 3 ceramics prepared by a soft chemical route”, Appl. Phys. A, 91 (2008) 101-106, 2008.
71. 3", Mater. Lett., 58 (2004) 1999-2001.
72. 3nanopowders by an aqueous coprecipitation method”, J. Ceram. Process. Res., 9 (2008) 576-579.
73. S. Bhaskar Reddy, K. Prasad Rao, M.S. Ramachandra Rao “Nanocrystalline barium zirconate titanate synthesized at low temperature by an aqueous co-precipitation technique”, Scripta Materialia, 57 (2007) 591-594.
74. 3 powder synthesized through modified chemical route”, J. Alloy Compd,, 430 (2007) 212-216.
75. 3", J. Alloy Compd., 340, (2002) 214-219.
76. 3 by the hydrothermal process from peroxo-precursors”, J. Eur. Ceram. Soc. 25 (2005) 2009-2012.
77. 3 nanopowders and nanocrystalline ceramics: I. Nanopowders”, pp. 89-117, in New developments in Advanced Functional Ceramics, Ed. by L. Mitoşeriu, Transworld Research Network, India, 2007.
78. 3 Powders and Related Ceramics”, J. Therm. Anal. Calorim., 88 (2007) 251-260.
79. 3 Ceramics Prepared by a Sol-Precipitation Route”, Proceedings 10th ECerS Conf., Göller Verlag, Ed. J.G.Heinrich and C. Aneziris, Baden-Baden, (2007) 575-580.
80. 3 by soft chemistry routes”, J. Electroceram., 24 (2010) 46-50.
81. M.P. Pechini, Method of preparing lead and alkaline earth titanates and niobates and coating method using the same for a capacitor. US Patent No. 3330697, 11 July 1967.
82. D. Hennings, W. Mayr, “Thermal Decomposition of (BaTi) Citrate into Barium Titanate”, J. Solid State Chem., 26 (1978) 329-338.
83. S. Kumar, G. L. Messing, “Synthesis of barium titanate by a basic pH Pechini process”, Mat. Res. Soc. Symp. Proc., 271 (1992) 95-100.
84. S. Kumar, G.L. Messing, W.B. White, “Metal Organic Resin Derived Barium Titanate: I, Formation of Barium Titanium Oxycarbonate Intermediate”, J. Am. Ceram. Soc., 76 (1993) 617-624.
85. 3 Formation”, J. Am. Ceram. Soc., 77 (1994) 2940-2948.
86. J.P. Coutures, P. Odier, C. Proust, “Barium titanate formation by organic resins formed with mixed citrate”, J. Mat. Sci., 27 (1992) 1849-1856.
87. 3 at reduced temperature”, Eur. J. Solid State Inorg. Chem., Soc., 32 (1995) 863-871.
88. M. Arima, M. Kakihana, Y. Nakamura, M. Yashima, M. Yoshimura, “Polymerized Complex Route to Barium Titanate Powders Using Barium-Titanium Mixed-Metal Citric Acid Complex”, J. Am. Ceram. Soc., 79 (1996) 2847-2856.
89. 3Nanoparticles Synthesized from Polymeric Precursor”, J. Chem. Phys. Solids, 59 (1998) 659-666.
90. J.-D. Tsay, T.-T. Fang, T.A. Gubiotti, J.Y. Ying, “Evolution of the formation of barium titanate in the citrate process: the effect of the pH and the molar ratio of barium ion and citric acid”, J. Mater. Sci., 33 (1998) 3721-3727.
91. 3 formation by thermal decomposition of (BaTi)-citrate polyester resin in air”, J. Mater. Res., 16 (2001) 197-209.
92. 3 formation mechanism”, J. Mater. Chem., 11 (2001) 1828-1836.
93. 3 nanopowders prepared by the modified pechini method”, J. Therm. Anal. Calorim., 87 (2007) 725-730.
94. 3 ceramics”, Phase Transit., 79 (2006) 375-388.
95. 3 ceramics prepared from powders synthesized by the modified Pechini route”, J. Eur. Ceram. Soc., 27 (2007) 3655-3658.
96. 3 ceramics prepared by the modified-Pechini method”, Ferroelectrics, 369 (2008) 22-34.
97. M. H. Frey, D. A. Payne, “Grain-size effect on structure and phase transformations for barium titanate”, Phys. Rev. B, 54 (1996) 3158-3168.
98. C.E. Ciomaga, “Contributions to the study of ferroelectric relaxors”, PhD Thesis, “Al.I. Cuza” University, Iaşi, România (2007).
99. J.T.S. Irvine, D.C. Sinclair, A.R. West, “Electroceramics: Characterisation by ac Impedance Spectroscopy”, Adv. Mater. 2 (2004) 132-138.
100. N. J. Kidner, Z. J. Homrighaus, B. J. Ingram, T. O. Mason, E. J. Garboczi, “Impedance/Dielectric Spectroscopy of Electroceramics -Part 1: Evaluation of Composite Models for Polycrystalline Ceramics”, J. Electroceram., 14 (2005) 283-291.
101. 3 thin films”, J. Phys. D: Appl. Phys. 39 (2006) 1635-164.
102. nd, 1969, (1970) 26-36.
103. 3(PMN) - A Ferroelectric with A Diffused Phase Transition” Ferroelectrics, 5 (1973) 3-9.
104. S.M. Pilgrim, A.E. Sutherland, S.R. Winzer, “Diffuseness as a Useful. Parameter for Relaxor Ceramics”, J. Am. Ceram. Soc., 73 (1990) 3122-3125.
105. A.A. Bokov, Z.G. Ye, “Phenomenological description of dielectric permittivity peak in relaxor ferroelectrics”, Solid State Commun., 116 (2000) 105-108.
106. K. Uchino, S. Nomura, “Critical exponents of dielectric constants in diffused phase transition crystals”, Ferroelectrics Lett., 44 (1982) 55-61.
107. I.A. Santos, J.A. Eiras, “Phenomenological description of the diffuse phase transition in ferroelectrics”, J. Phys.: Condens. Matter, 13 (2001) 11733-11740.
108. L. Mitoşeriu, “Investigation of the role of chemical inhomogeneity and grain size effects towards the relaxor behaviour in perovskite systems”, Ph. D. Thesis, Univ. of Genoa, Italy (2005).
109. 3 ceramics”, Applied Phys. Lett., 84 (2004) 2418-2420.
110. 3 ceramics”, Phys. Rev. B, 70 (2004) 024107.
111. 3 ceramics”, Phys. Rev. B., 73 (2006) 064114.
112. E.J. Abram, D.C. Sinclair and A.R. West, “A Strategy for Analysis and Modelling of Impedance Spectroscopy Data of Electroceramics: Doped Lanthanum Gallate”, J. Electroceram., 10 (2003) 165-177.
113. D.P. Almond, A.R. West, “Ion Concentrations in Solid Electrolytes from an Analysis of AC Conductivity”, Solid State Ionics, 9/10 (1983) 277-282.
114. 3 showing positive temperature coefficient of resistance”, J. Appl. Phys. 66 (1989) 3850-3856.
115. 3 single crystal”, Phys. Rev. B, 39 (1989) 13486-13492.
116. P. Debye, “Polar Molecules”, New York: Chemical Catalogue Company (1929).
117. S. Cole, R. Cole, “Dispersion and absorption in dielectrics. I. Alternating current characteristics”, J. Chem. Phys., 9 (1941) 341-351.
118. A.K. Jonscher, Dielectric Relaxation in Solids, London: Chelsea Dielectric Press (1983).
119. 3", Phys. Rev. B, 17 (1978) 4593-4599.
120. 3: Nb”, Phys. Rev. B, 45 (1992) 2029-2034.
121. O. Bidault, P. Goux, M. Kchikech, M. Belkaoumi, M. Maglione, “Space-charge relaxation in perovskites”, Phys. Rev. B, 49 (1994) 7868-7873.
122. B.S. Kang, S.K. Choi, C.H. Park, “Diffuse dielectric anomaly in perovskite-type ferroelectric oxides in the temperature range of 400-700°C”, J. Appl. Phys., 94 (2003) 1904-1911.
123. C.E. Ciomaga et al., unpublished work.
124. F. Preisach, "Über die magnetische Nachwirkung”, Z. Phys., 94 (1935) 277-302.
125. H.G. Katzgraber, F. Pazmandi, C.R. Pike, K. Liu, R.T. Scalettar, K.L. Verosub, G.T. Zimanyi, “Reversal-Field Memory in the Hysteresis of Spin Glasses”, Phys. Rev. Lett., 89 (2002) 257202.
126. C. Enachescu, R. Tanasa, A. Stancu, E. Codjovi, J. Linares, F. Varret, “FORC method applied to the thermal hysteresis of spin transition solids: first approach of static and kinetic properties”, Physica B, 343 (2004) 15-19.
127. A. Stancu, D. Ricinschi, L. Mitoşeriu, P. Postolache, M. Okuyama, “First-order reversal curves diagrams for the characterization of ferroelectric switching”, Appl. Phys. Lett., 83 (2003) 3767-3769.
128. D. Ricinschi, L. Mitoşeriu, A. Stancu, P. Postolache, M. Okuyama, “Analysis of the Switching Characteristics of PZT Films by First Order Reversal Curve Diagrams”, Integr. Ferroelectr., 67 (2004) 103-115.
129. L. Cima, E. Labouré, “Characterisation and model of ferroelectrics based on experimental Preisach density”, Rev. Sci. Instrum., 73 (2002) 3548-3552.
130. L. Cima, E. Labouré, “A model of ferroelectric behavior based on a complete switching density”, J. Appl. Phys., 95 (2004) 2659.
131. A. Stancu, C. Pike, L. Stoleriu, P. Postolache, D. Cimpoeşu, “Micromagnetic and Preisach analysis of the First Order Reversal Curves (FORC) diagram”, J. Appl. Phys., 93 (2003) 6620-6622.
132. D. Bolten, U. Böttger, R. Waser, “Reversible and irreversible polarization processes in ferroelectric ceramics and thin films”, J. Appl. Phys., 93 (2003) 1735-1742.
133. D. Bolten, U. Böttger, R. Waser,“Reversible and irreversible piezoelectric and ferroelectric response in ferroelectric ceramics and thin films”, J. Eur. Ceram. Soc., 24 (2004) 725-732.
134. C.H. Tsang, F.G. Shin, “Simulation of nonlinear dielectric properties of polyvinylidene fluoride based on the Preisach model”, J. Appl. Phys., 93 (2003) 2861-2865.
135. 3 Particles”, Jpn. J. Appl. Phys., Part 1, 43 (2004) 6521-6524.
136. 9 films prepared by metalorganic decomposition”, J. Appl. Phys., 88 (2000) 1035-1041.
137. 2/Si substrates”, Mater. Chem. Phys., 82 (2003) 826-830.
138. 3thin films under external stress”, Phys. Rev. B, 55 (1997) 3485-3489.
139. 9 thin films”, Phys. Status Solidi, A 157 (1996) 75-82.
140. G. Arlt, D. Hennings, G. de With, “Dielectric Properties of Fine-Grained Barium Titanate Ceramics”, J. Appl. Phys., 58 (1985) 1619-1625.
141. Y. Kinoshita, A.J. Yamaji, J. Appl. Phys., “Grain-size effects on dielectric properties in barium titanate ceramics”, 47 (1976) 371-373.
142. 3 ceramics described by First Order Reversal Curves diagrams”, J. Eur. Ceram. Soc., 27 (2007) 3723-3726.
143. D. Piazza, L. Stoleriu, L. Mitoşeriu, A. Stancu, C. Galassi, “Characterisation of porous PZT ceramics by first-order reversal curves (FORC) diagrams”, J. Eur. Ceram. Soc., 26 (2006) 2959-2962.
144. 3 ceramics investigated by First Order Reversal Curves method”, J. Eur. Ceram. Soc. 26 (2006) 2915-2921.
145. L. Stoleriu, A. Stancu, L. Mitoşeriu, D. Piazza, C. Galassi, “Analysis of switching properties of porous ferroelectric ceramics by means of firstorder reversal curve diagrams”, Phys. Rev. B, 74 (2006) 174107.
146. 3". J. Am. Ceram. Soc., 65 (1982) 470-474.
147. M.H. Frey, Z. Xu, P. Han, D.A Payne, “The role of interfaces on an apparent grain size effect on the dielectric Properties for ferroelectric barium titanate ceramics”, Ferroelectrics, 206-207 (1998) 337-353.
148. A.V. Polotai, A.V. Ragulya, C.A. Randall, “Preparation and Size Effect in Pure Nanocrystalline Barium Titanate Ceramics”, Ferroelectrics, 288 (2003) 93-102.
149. Z. Shen, Z. Zhao, H. Peng, M. Nygren, “Formation of tough interlocking microstructures in silicon nitride ceramics by dynamic ripening”, Nature, 417 (2002) 266-269.
150. 3 using spark-plasma-sintering”, Mater. Chem. Phys., 82 (2003) 173-180.
151. 3 prepared by sparkplasma- sintering”, Mater. Chem. Phys., 83 (2004) 23-28.
152. R. Licheri, S. Fadda, Roberto Orrù, G. Cao, V. Buscaglia, “Selfpropagating high-temperature synthesis of barium titanate and subsequent densification by spark plasma sintering (SPS)", J. Eur. Ceram. Soc., 27 (2007) 2245-2253.
153. 3 target produced by SPS and its electrical properties for MLCC application”, Mater. Sci. Eng., B103 (2003) 128-134.
154. 3 ceramics by spark plasma sintering”, Ceram. Int., 30 (2004) 405-410.
155. 3ceramics with submicrometer grains by spark plasma sintering”. J. Am. Ceram. Soc., 82 (1999) 939-943.
156. 3" ceramics by spark plasma sintering. J. Mater. Res., 17 (2002) 575-581.
157. X. Deng, X. Wang, H. Wen, A. Kang, Z. Gui, L. Li, “Phase transitions in nanocrystalline barium titanate ceramics prepared by spark plasma sintering”, J. Am. Ceram. Soc., 89 (2006), 1059-1064.
158. M. Omori, “Sintering, consolidation, reaction and crystal growth by spark plasma sintering (SPS)", Mater. Sci. Eng. A, 287 (2000) 183-188.
159. M. Nygren, Z. Shen, “On the preparation of bio-, nano- and structural ceramics and composites by spark plasma sintering”, Solid State Sci., 5 (2003) 125-131.
160. 3 ceramics”, Nanotechnology, 15 (2004) 1113-1117.
161. 3 ceramic prepared by the combination of mechanosynthesized nanopowders and spark plasma sintering. Chem. Mater., 17 (2005) 6205-6212.
162. R. Waser, R. Hagenbeck, Acta Mater., “Grain boundaries in dielectric and mixed-conducting ceramics”, 48 (2000) 797-825.
163. 3: Ta ferroelectric ceramics”, 17 (2005) 1711-1716.
164. 3: Ca”, Phys. Rev. B, 61 (2000) 3889-3896.
165. O. Bidault, M. Maglione, M. Actis, M. Kchikech, B. Salce, “Polaronic relaxation in perovskites”, Phys. Rev. B, 52 (1995) 4191-4197.
166. 3", Phys. Rev. B, 62 (2000) 228-236.
167. A.K. Jonscher, Universal Relaxation Law (Chelsea, London: Dielectric Press), 1996.
168. I. Bunget, M. Popescu, Physics of Solid Dielectrics, Elsevier: New York, 1978.
169. V. Petkov, V. Buscaglia, M. T. Buscaglia, Z. Zhao, Y. Ren, “Structural coherence and ferroelectricity decay in submicron- and nano-sized perovskites”, Phys. Rev. B, 78 (2008) 054107.
170. A. Yu. Emelyanov, N.A. Pertsev, S. Hoffmann-Eifert, U. Böttger, R. Waser, “Grain-boundary effect on the Curie-Weiss law of ferroelectric ceramics and polycrystalline thin films: calculation by the method of effective medium”, J. Electroceram., 9 (2002) 5-16.