Influence of object translucency on the scanning accuracy of a powder-free intraoral scanner: A laboratory study

Journal of Prosthetic Dentistry

Volumn 117, Issue 1, 2017, Pages 93-101

  Li, Hong ^a   Lyu, Peijun ^a   Wang, Yong ^a   Sun, Yuchun ^a  

^a PEKING UNIVERSITY SCHOOL AND HOSPITAL OF STOMATOLOGY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

RESIN; ZIRCONIUM; ZIRCONIUM OXIDE;

CERAMICS; CONFOCAL MICROSCOPY; DENTAL IMPRESSION; HUMAN; IN VITRO STUDY; PROCEDURES; PROSTHESIS DESIGN; REPRODUCIBILITY; THREE DIMENSIONAL IMAGING;

CERAMICS; DENTAL IMPRESSION TECHNIQUE; DENTAL PROSTHESIS DESIGN; HUMANS; IMAGING, THREE-DIMENSIONAL; IN VITRO TECHNIQUES; MICROSCOPY, CONFOCAL; REPRODUCIBILITY OF RESULTS; RESINS, SYNTHETIC; ZIRCONIUM;

EID: 85006858106     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.prosdent.2016.04.008     Document Type: Article

References (34)

1. 1 Logozzo, S., Franceschini, G., Kilpelä, A., Caponi, M., Governi, L., Blois, L., A comparative analysis of intraoral 3D digital scanners for restorative dentistry. Internet J Med Technol, 5, 2001.
2. 2 Birnbaum, N.S., Aaronson, H.B., Stevens, C., Cohen, B., 3D digital scanners: A high-tech approach to more accurate dental impressions. Inside Dent, 5, 2009.
3. 3 Harrison L. Digital impressions competition booming. 2009. Available at: http://www.drbicuspid.com//index.aspx?sec=ser&sub=def&pag=dis&ItemID=301650. Last accessed July 6, 2016.
4. 4 D'Apuzzo, N., Overview of 3D surface digitization technologies in Europe. Proc SPIE Int Soc Opt Eng 6056 (2006), 5605–5617.
5. 5 Xiong, F., Chao, Y., Zhu, Z., Translucency of newly extracted maxillary central incisors at nine locations. J Prosthet Dent 100 (2008), 11–17.
6. 6 Nayar, S.K., Krishnan, G., Grossberg, M.D., Raskar, R., Fast separation of direct and global components of a scene using high frequency illumination. ACM Transactions on Graphics (TOG) 25 (2006), 935–944.
7. 7 Patzelt, S.B., Emmanouilidi, A., Stampf, S., Strub, J.R., Att, W., Accuracy of full-arch scans using intraoral scanners. Clin Oral Investig 18 (2014), 1687–1694.
8. 8 Andriessen, F.S., Rijkens, D.R., van der Meer, W.J., Wismeijer, D.W., Applicability and accuracy of an intraoral scanner for scanning multiple implants in edentulous mandibles: a pilot study. J Prosthet Dent 111 (2014), 186–194.
9. 9 Nedelcu, R.G., Persson, A.S., Scanning accuracy and precision in 4 intraoral scanners: an in vitro comparison based on 3-dimensional analysis. J Prosthet Dent 112 (2014), 1461–1471.
10. 10 Henkel, G.L., A comparison of fixed prostheses generated from conventional vs digitally scanned dental impressions. Compend Contin Educ Dent 28 (2007), 422–424.
11. 11 Birnbaum, N.S., Aaronson, H.B., Dental impressions using 3D digital scanners: virtual becomes reality. Compend Contin Educ Dent 29 (2008), 494–505.
12. 12 Winkler, D., Fundamentals of color: Shade matching and communication in esthetic dentistry. Br Dent J, 199, 2005, 59.
13. 13 Kurz, M., Attin, T., Mehl, A., Influence of material surface on the scanning error of a powder-free 3D measuring system. Clin Oral Investig 19 (2015), 2035–2043.
14. 14 Keul, C., Stawarczyk, B., Erdelt, K.J., Beuer, F., Edelhoff, D., Güth, J.F., Fit of 4-unit FDPs made of zirconia and CoCr-alloy after chairside and labside digitalization—a laboratory study. Dent Mater 30 (2014), 400–407.
15. 15 Ender, A., Mehl, A., Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision. J Prosthet Dent 109 (2013), 121–128.
16. 16 Wiranto, M.G., Engelbrecht, W.P., Tutein Nolthenius, H.E., van der Meer, W.J., Ren, Y., Validity, reliability, and reproducibility of linear measurements on digital models obtained from intraoral and cone-beam computed tomography scans of alginate impressions. Am J Orthod Dentofacial Orthop 143 (2013), 140–147.
17. 17 Flügge, T.V., Schlager, S., Nelson, K., Nahles, S., Metzger, M.C., Precision of intraoral digital dental impressions with iTero and extraoral digitization with the iTero and a model scanner. Am J Orthod Dentofacial Orthop 144 (2013), 471–478.
18. 18 Patzelt, S.B., Vonau, S., Stampf, S., Att, W., Assessing the feasibility and accuracy of digitizing edentulous jaws. J Am Dent Assoc 144 (2013), 914–920.
19. 19 Naidu, D., Freer, T.J., Validity, reliability, and reproducibility of the iOC intraoral scanner: a comparison of tooth widths and Bolton ratios. Am J Orthod Dentofacial Orthop 144 (2013), 304–310.
20. 20 Nayyar, N., Yilmaz, B., McGlumphy, E., Using digitally coded healing abutments and an intraoral scanner to fabricate implant-supported, cement-retained restorations. J Prosthet Dent 109 (2013), 210–215.
21. 21 Zhongning, W., Zhimin, L., Xintao, X., Lianqing, Zh, Evaluation of measurement error and uncertainty. 1st ed., 2008, Science Press, Beijing, 49–50.
22. 22 Ender, A., Mehl, A., Full arch scans: conventional versus digital impressions—an in-vitro study. Int J Comput Dent 14 (2011), 11–21.
23. 23 Hasegawa, A., Ikeda, I., Kawaguchi, S., Color and translucency of in vivo natural central incisors. J Prosthet Dent 83 (2000), 418–423.
24. 24 Shiraishi, T., Wood, D.J., Shinozaki, N., van Noort, R., Optical properties of base dentin ceramics for all-ceramic restorations. Dent Mater 27 (2011), 165–172.
25. 25 Friebel, M., Povel, K., Cappius, H.J., Helfmann, J., Meinke, M., Optical properties of dental restorative materials in the wavelength range 400 to 700 nm for the simulation of color perception. J Biomed Opt, 14, 2009, 54029.
26. 26 Chen, Q.G., Lin, B., Optical penetration depth simulation of dental tissue based on finite element method. Acta Photonica Sinica 39 (2010), 680–683.
27. 27 Weaver, J.D., Johnson, G.H., Bales, D.J., Marginal adaptation of castable ceramic crowns. J Prosthet Dent 66 (1991), 747–753.
28. 28 Rungruanganunt, P., Kelly, J.R., Adams, D.J., Two imaging techniques for 3D quantification of pre-cementation space for CAD/CAM crowns. J Dent 38 (2010), 995–1000.
29. 29 Conrad, H.J., Delong, R., Accuracy of two impression techniques with angulated implants. J Prosthet Dent 97 (2007), 349–356.
30. 30 Baum, K., Hartmann, R., Bischoff, T., Oelerich, J.O., Finkensieper, S., Heverhagen, J.T., Three-dimensional surface reconstruction within noncontact diffuse optical tomography using structured light. J Biomed Opt, 17, 2012, 126009.
31. 31 Holroyd, M., Lawrence, J., An analysis of using high-frequency sinusoidal illumination to measure the 3D shape of translucent objects. IEEE Comput Vis Pattern Recognit, 2011, 2985–2991.
32. 32 Tongbo, C., Lensch, H., Fuchs, C., Seidel, H.P., Polarization and phase-shifting for 3D scanning of translucent objects. Proc IEEE Comput Soc Conf Comput Vis Pattern Recognit, 2007, 1987–1994.
33. 33 Narasimhan, S.G., Nayar, S.K., Bo, S., Koppal, S.J., Structured light in scattering media. IEEE I Conf Comp Vis, 2005, 420–427.
34. 34 Jeon, J.H., Choi, B.Y., Kim, C.M., Kim, J.H., Kim, H.Y., Kim, W.C., Three-dimensional evaluation of the repeatability of scanned conventional impressions of prepared teeth generated with white- and blue-light scanners. J Prosthet Dent 114 (2015), 549–553.