Surface-bound microgels — From physicochemical properties to biomedical applications

Advances in Colloid and Interface Science

Volumn 238, Issue , 2016, Pages 88-104

  Nyström, Lina ^a   Malmsten, Martin ^a,b  

^a UPPSALA UNIVERSITY   (Sweden)

^b UNIVERSITY OF COPENHAGEN   (Denmark)

Author keywords

Biomaterial; Biosensor; Drug delivery; Microgel; Surface bound

Indexed keywords

BIOMATERIALS; BIOSENSORS; DEPOSITION; DRUG DELIVERY; MEDICAL APPLICATIONS; SELF ASSEMBLY; SURFACE TREATMENT;

BIOMEDICAL APPLICATIONS; DIRECTED SELF-ASSEMBLY; MICROGEL; MULTILAYER STRUCTURES; PHYSICAL ADSORPTION; PHYSICOCHEMICAL PROPERTY; SURFACE BOUNDS; SURFACE INITIATED POLYMERIZATION;

GELS;

EID: 85002323665     PISSN: 00018686     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cis.2016.11.003     Document Type: Review

References (113)

1. [1] Saunders, B.R., Vincent, B., Microgel particles as model colloids: theory, properties and applications. Adv Colloid Interf Sci 80 (1999), 1–25.
2. [2] Pelton, R., Temperature-sensitive aqueous microgels. Adv Colloid Interf Sci 85 (2000), 1–33.
3. [3] Malmsten, M., Bysell, H., Hansson, P., Biomacromolecules in microgels — opportunities and challenges for drug delivery. Curr Opin Colloid Interface Sci 15 (2010), 435–444.
4. [4] Vinogradov, S.V., Bronich, T.K., Kabanov, A.V., Nanosized cationic hydrogels for drug delivery: preparation, properties and interactions with cells. Adv Drug Deliv Rev 54 (2002), 135–147.
5. [5] Bysell, H., Mansson, R., Hansson, P., Malmsten, M., Microgels and microcapsules in peptide and protein drug delivery. Adv Drug Deliv Rev 63 (2011), 1172–1185.
6. [6] Oh, J.K., Drumright, R., Siegwart, D.J., Matyjaszewski, K., The development of microgels/nanogels for drug delivery applications. Prog Polym Sci 33 (2008), 448–477.
7. [7] Lyon, L.A., Debord, J.D., Debord, S.B., Jones, C.D., McGrath, J.G., Serpe, M.J., Microgel colloidal crystals. J Phys Chem B 108 (2004), 19099–19108.
8. [8] Hu, L., Serpe, M.J., Color-tunable etalons assembled from poly (N-isopropylacrylamide) based microgels. Polymers 4 (2012), 134–149.
9. [9] Wellert, S., Richter, M., Hellweg, T., von Klitzing, R., Hertle, Y., Responsive microgels at surfaces and interfaces. Z Phys Chemie-Int J Res Phys Chem Chem Phys 229 (2015), 1225–1250.
10. [10] Nayak, S., Lyon, L.A., Soft nanotechnology with soft nanoparticles. Angew Chem Int Ed 44 (2005), 7686–7708.
11. [11] Burmistrova, A., Steitz, R., von Klitzing, R., Temperature response of PNIPAM derivatives at planar surfaces: comparison between polyelectrolyte multilayers and adsorbed microgels. ChemPhysChem 11 (2010), 3571–3579.
12. [12] Höfl, S., Zitzler, L., Hellweg, T., Herminghaus, S., Mugele, F., Volume phase transition of “smart” microgels in bulk solution and adsorbed at an interface: a combined AFM, dynamic light, and small angle neutron scattering study. Polymer 48 (2007), 245–254.
13. [13] Richter, M., Hunnenmörder, M., Klitzing, R.V., The impact of the cononsolvency effect on poly (N-isopropylacrylamide) based microgels at interfaces. Colloid Polym Sci 292 (2014), 2439–2452.
14. [14] Tagit, O., Tomczak, N., Vancso, G.J., Probing the morphology and nanoscale mechanics of single poly(N-isopropylacrylamide) microgels across the lower-critical-solution temperature by atomic force microscopy. Small 4 (2008), 119–126.
15. [15] Hashmi, S.M., Dufresne, E.R., Mechanical properties of individual microgel particles through the deswelling transition. Soft Matter 5 (2009), 3682–3688.
16. [16] Matzelle, T.R., Ivanov, D.A., Landwehr, D., Heinrich, L.A., Herkt-Bruns, C., Reichelt, R., et al. Micromechanical properties of “Smart” gels: studies by scanning force and scanning electron microscopy of PNIPAAm. J Phys Chem B 106 (2002), 2861–2866.
17. [17] Matzelle, T.R., Geuskens, G., Kruse, N., Elastic properties of poly(N-isopropylacrylamide) and poly(acrylamide) hydrogels studied by scanning force microscopy. Macromolecules 36 (2003), 2926–2931.
18. [18] Fernandes, P.A.L., Schmidt, S., Zeiser, M., Fery, A., Hellweg, T., Swelling and mechanical properties of polymer gels with cross-linking gradient. Soft Matter 6 (2010), 3455–3458.
19. [19] Richter, M., Steinhilber, D., Haag, R., von Klitzing, R., Visualization of real-time degradation of pH-responsive polyglycerol nanogels via atomic force microscopy. Macromol Rapid Commun 35 (2014), 2018–2022.
20. [20] South, A.B., Lyon, L.A., Direct observation of microgel erosion via in-liquid atomic force microscopy. Chem Mater 22 (2010), 3300–3306.
21. [21] Sorrell, C.D., Lyon, L.A., Deformation controlled assembly of binary microgel thin films. Langmuir 24 (2008), 7216–7222.
22. [22] Saxena, S., Andrew, L.L., Influence of binary microgel phase behavior on the assembly of multi-functional raspberry-structured microgel heteroaggregates. J Colloid Interface Sci 455 (2015), 93–100.
23. [23] Saxena, S., Lyon, L.A., Influence of microgel packing on raspberry-like heteroaggregate assembly. J Colloid Interface Sci 442 (2015), 39–48.
24. [24] Pinaud, F., Geisel, K., Masse, P., Catargi, B., Isa, L., Richtering, W., et al. Adsorption of microgels at an oil-water interface: correlation between packing and 2D elasticity. Soft Matter 10 (2014), 6963–6974.
25. [25] Deshmukh, O.S., Maestro, A., Duits, M.H., van den Ende, D., Stuart, M.C., Mugele, F., Equation of state and adsorption dynamics of soft microgel particles at an air-water interface. Soft Matter 10 (2014), 7045–7050.
26. [26] Schmitt, V., Ravaine, V., Surface compaction versus stretching in Pickering emulsions stabilised by microgels. Curr Opin Colloid Interface Sci 18 (2013), 532–541.
27. [27] Massé, P., Sellier, E., Schmitt, V., Ravaine, V., Impact of electrostatics on the adsorption of microgels at the interface of pickering emulsions. Langmuir 30 (2014), 14745–14756.
28. [28] Destribats, M., Eyharts, M., Lapeyre, V., Sellier, E., Varga, I., Ravaine, V., et al. Impact of pNIPAM microgel size on its ability to stabilize pickering emulsions. Langmuir 30 (2014), 1768–1777.
29. [29] Destribats, M., Wolfs, M., Pinaud, F., Lapeyre, V., Sellier, E., Schmitt, V., et al. Pickering emulsions stabilized by soft microgels: influence of the emulsification process on particle interfacial organization and emulsion properties. Langmuir 29 (2013), 12367–12374.
30. [30] Kwok, M.H., Ngai, T., A confocal microscopy study of micron-sized poly(N-isopropylacrylamide) microgel particles at the oil-water interface and anisotopic flattening of highly swollen microgel. J Colloid Interface Sci 461 (2016), 409–418.
31. [31] Nyström, L., Álvarez-Asencio, R., Frenning, G., Saunders, B.R., Rutland, M.W., Malmsten, M., Electrostatic swelling transitions in surface-bound microgels. ACS Appl Mater Interfaces, 2016, 10.1021/acsami.6b09751.
32. [32] Howard, S.C., Craig, V.S.J., FitzGerald, P.A., Wanless, E.J., Swelling and collapse of an adsorbed pH-responsive film-forming microgel measured by optical reflectometry and QCM. Langmuir 26 (2010), 14615–14623.
33. [33] FitzGerald, P.A., Dupin, D., Armes, S.P., Wanless, E.J., In situ observations of adsorbed microgel particles. Soft Matter 3 (2007), 580–586.
34. [34] Wiedemair, J., Serpe, M.J., Kim, J., Masson, J.-F., Lyon, L.A., Mizaikoff, B., et al. In-situ AFM studies of the phase-transition behavior of single thermoresponsive hydrogel particles. Langmuir 23 (2007), 130–137.
35. [35] Wellert, S., Hertle, Y., Richter, M., Medebach, M., Magerl, D., Wang, W., et al. Inner structure of adsorbed ionic microgel particles. Langmuir 30 (2014), 7168–7176.
36. [36] Burmistrova, A., von Klitzing, R., Control of number density and swelling/shrinking behavior of P(NIPAM-AAc) particles at solid surfaces. J Mater Chem 20 (2010), 3502–3507.
37. [37] Nerapusri, V., Keddie, J.L., Vincent, B., Bushnak, I.A., Swelling and deswelling of adsorbed microgel monolayers triggered by changes in temperature, pH, and electrolyte concentration. Langmuir 22 (2006), 5036–5041.
38. [38] Burmistrova, A., Richter, M., Eisele, M., Üzüm, C., von Klitzing, R., The effect of co-monomer content on the swelling/shrinking and mechanical behaviour of individually adsorbed PNIPAM microgel particles. Polymers 3 (2011), 1575–1590.
39. [39] Burmistrova, A., Richter, M., Uzum, C., Klitzing, R., Effect of cross-linker density of P(NIPAM-co-AAc) microgels at solid surfaces on the swelling/shrinking behaviour and the Young's modulus. Colloid Polym Sci 289 (2011), 613–624.
40. [40] Bachman, H., Brown, A.C., Clarke, K.C., Dhada, K.S., Douglas, A., Hansen, C.E., et al. Ultrasoft, highly deformable microgels. Soft Matter 11 (2015), 2018–2028.
41. [41] Schroeder, R., Rudov, A.A., Lyon, L.A., Richtering, W., Pich, A., Potemkin, I.I., Electrostatic interactions and osmotic pressure of counterions control the pH-dependent swelling and collapse of polyampholyte microgels with random distribution of ionizable groups. Macromolecules 48 (2015), 5914–5927.
42. [42] Dimitriadis, E.K., Horkay, F., Maresca, J., Kachar, B., Chadwick, R.S., Determination of elastic moduli of thin layers of soft material using the atomic force microscope. Biophys J 82 (2002), 2798–2810.
43. [43] Zavgorodnya, O., Serpe, M.J., Assembly of poly(N-isopropylacrylamide)-co-acrylic acid microgel thin films on polyelectrolyte multilayers: effects of polyelectrolyte layer thickness, surface charge, and microgel solution pH. Colloid Polym Sci 289 (2011), 591–602.
44. [44] Serpe, M.J., Lyon, L.A., Optical and acoustic studies of pH-dependent swelling in microgel thin films. Chem Mater 16 (2004), 4373–4380.
45. [45] Serpe, M.J., Jones, C.D., Lyon, L.A., Layer-by-layer deposition of thermoresponsive microgel thin films. Langmuir 19 (2003), 8759–8764.
46. [46] Clarke, K.C., Lyon, L.A., Modulation of the deswelling temperature of thermoresponsive microgel films. Langmuir 29 (2013), 12852–12857.
47. [47] Sorrell, C.D., Lyon, L.A., Bimodal swelling responses in microgel thin films. J Phys Chem B 111 (2007), 4060–4066.
48. [48] Schmidt, S., Motschmann, H., Hellweg, T., von Klitzing, R., Thermoresponsive surfaces by spin-coating of PNIPAM-co-PAA microgels: a combined AFM and ellipsometry study. Polymer 49 (2008), 749–756.
49. [49] Singh, N., Bridges, A.W., García, A.J., Lyon, L.A., Covalent tethering of functional microgel films onto poly(ethylene terephthalate) surfaces. Biomacromolecules 8 (2007), 3271–3275.
50. [50] Schmidt, S., Hellweg, T., von Klitzing, R., Packing density control in P(NIPAM-co-AAc) microgel monolayers: effect of surface charge, pH, and preparation technique. Langmuir 24 (2008), 12595–12602.
51. [51] Debord, S.B., Lyon, L.A., Influence of particle volume fraction on packing in responsive hydrogel colloidal crystals. J Phys Chem B 107 (2003), 2927–2932.
52. [52] Tsuji, S., Kawaguchi, H., Self-assembly of poly(N-isopropylacrylamide)-carrying microspheres into two-dimensional colloidal arrays. Langmuir 21 (2005), 2434–2437.
53. [53] Tsuji, S., Kawaguchi, H., Colored thin films prepared from hydrogel microspheres. Langmuir 21 (2005), 8439–8442.
54. [54] Horecha, M., Senkovskyy, V., Synytska, A., Stamm, M., Chervanyov, A.I., Kiriy, A., Ordered surface structures from PNIPAM-based loosely packed microgel particles. Soft Matter 6 (2010), 5980–5992.
55. [55] Hiltl, S., Schurings, M.-P., Balaceanu, A., Mayorga, V., Liedel, C., Pich, A., et al. Guided self-assembly of microgels: from particle arrays to anisotropic nanostructures. Soft Matter 7 (2011), 8231–8238.
56. [56] Hiltl, S., Oltmanns, J., Boker, A., A one-step screening process for optimal alignment of (soft) colloidal particles. Nanoscale 4 (2012), 7338–7345.
57. [57] Muller, M., Karg, M., Fortini, A., Hellweg, T., Fery, A., Wrinkle-assisted linear assembly of hard-core/soft-shell particles: impact of the soft shell on the local structure. Nanoscale 4 (2012), 2491–2499.
58. [58] Jaber, S., Karg, M., Morfa, A., Mulvaney, P., 2D assembly of gold-PNIPAM core-shell nanocrystals. Phys Chem Chem Phys 13 (2011), 5576–5578.
59. [59] McGillicuddy, F.C., Lynch, I., Rochev, Y.A., Burke, M., Dawson, K.A., Gallagher, W.M., et al. Novel “plum pudding” gels as potential drug-eluting stent coatings: controlled release of fluvastatin. J Biomed Mater Res A 79 (2006), 923–933.
60. [60] Nayak, S., Debord, S.B., Lyon, L.A., Investigations into the deswelling dynamics and thermodynamics of thermoresponsive microgel composite films. Langmuir 19 (2003), 7374–7379.
61. [61] Chen, M., Cui, Z., Edmondson, S., Hodson, N., Zhou, M., Yan, J., et al. Photoactive composite films prepared from mixtures of polystyrene microgel dispersions and poly(3-hexylthiophene) solutions. Soft Matter 11 (2015), 8322–8332.
62. [62] Pinprayoon, O., Saiani, A., Groves, R., Saunders, B.R., Particulate ionomer films prepared from dispersions of crosslinked polymer colloids: a structure-property study. J Colloid Interface Sci 336 (2009), 73–81.
63. [63] Sorrell, C.D., Carter, M.C.D., Serpe, M.J., Color tunable poly (N-isopropylacrylamide)-co-acrylic acid microgel–Au hybrid assemblies. Adv Funct Mater 21 (2011), 425–433.
64. [64] Islam, M.R., Serpe, M.J., Label-free detection of low protein concentration in solution using a novel colorimetric assay. Biosens Bioelectron 49 (2013), 133–138.
65. [65] Zhang, Q.M., Xu, W., Serpe, M.J., Optical devices constructed from multiresponsive microgels. Angew Chem 53 (2014), 4827–4831 (International ed in English).
66. [66] Islam, M.R., Ahiabu, A., Li, X., Serpe, M.J., Poly (N-isopropylacrylamide) microgel-based optical devices for sensing and biosensing. Sensors (Basel, Switzerland) 14 (2014), 8984–8995.
67. [67] Hu, L., Serpe, M.J., Controlling the response of color tunable poly(N-isopropylacrylamide) microgel-based etalons with hysteresis. Chem Commun 49 (2013), 2649–2651.
68. [68] Islam, M.R., Serpe, M.J., Poly (N-isopropylacrylamide) microgel-based etalons and etalon arrays for determining the molecular weight of polymers in solution. APL Mater, 1, 2013, 052108.
69. [69] Gao, Y., Li, X., Serpe, M.J., Stimuli-responsive microgel-based etalons for optical sensing. RCS Adv. 5 (2015), 44074–44087.
70. [70] Kim, J., Singh, N., Lyon, L.A., Label-free biosensing with hydrogel microlenses. Angew Chem 45 (2006), 1446–1449 (International ed in English).
71. [71] Kim, J., Serpe, M.J., Lyon, L.A., Hydrogel microparticles as dynamically tunable microlenses. J Am Chem Soc 126 (2004), 9512–9513.
72. [72] Kim, J., Nayak, S., Lyon, L.A., Bioresponsive hydrogel microlenses. J Am Chem Soc 127 (2005), 9588–9592.
73. [73] Sigolaeva, L.V., Gladyr, S.Y., Gelissen, A.P.H., Mergel, O., Pergushov, D.V., Kurochkin, I.N., et al. Dual-stimuli-sensitive microgels as a tool for stimulated spongelike adsorption of biomaterials for biosensor applications. Biomacromolecules 15 (2014), 3735–3745.
74. [74] Bysell, H., Malmsten, M., Visualizing the interaction between poly-L-lysine and poly(acrylic acid) microgels using microscopy techniques: effect of electrostatics and peptide size. Langmuir 22 (2006), 5476–5484.
75. [75] Bysell, H., Schmidtchen, A., Malmsten, M., Binding and release of consensus peptides by poly(acrylic acid) microgels. Biomacromolecules 10 (2009), 2162–2168.
76. [76] Bysell, H., Hansson, P., Schmidtchen, A., Malmsten, M., Effect of hydrophobicity on the interaction between antimicrobial peptides and poly(acrylic acid) microgels. J Phys Chem B 114 (2010), 1307–1313.
77. [77] Bysell, H., Hansson, P., Malmsten, M., Effect of charge density on the interaction between cationic peptides and oppositely charged microgels. J Phys Chem B 114 (2010), 7207–7215.
78. [78] Bysell, H., Malmsten, M., Interactions between homopolypeptides and lightly cross-linked microgels. Langmuir 25 (2008), 522–528.
79. [79] Mansson, R., Bysell, H., Hansson, P., Schmidtchen, A., Malmsten, M., Effects of peptide secondary structure on the interaction with oppositely charged microgels. Biomacromolecules 12 (2011), 419–424.
80. [80] Månsson, R., Frenning, G., Malmsten, M., Factors affecting enzymatic degradation of microgel-bound peptides. Biomacromolecules 14 (2013), 2317–2325.
81. [81] Widenbring, R., Frenning, G., Malmsten, M., Chain and pore-blocking effects on matrix degradation in protein-loaded microgels. Biomacromolecules 15 (2014), 3671–3678.
82. [82] Nyström, L., Nordström, R., Bramhill, J., Saunders, B.R., Álvarez-Asencio, R., Rutland, M.W., et al. Factors affecting peptide interactions with surface-bound microgels. Biomacromolecules 17 (2016), 669–678.
83. [83] FitzGerald, P.A., Amalvy, J.I., Armes, S.P., Wanless, E.J., Film-forming microgels for pH-triggered capture and release. Langmuir 24 (2008), 10228–10234.
84. [84] Wang, L., Chen, D., Sun, J., Layer-by-layer deposition of polymeric microgel films on surgical sutures for loading and release of ibuprofen. Langmuir 25 (2009), 7990–7994.
85. 2 nanospheres for loading and release of ibuprofen. Powder Technol 235 (2013), 103–109.
86. [86] Zhang, J., Chen, D., Li, Y., Sun, J., Layer-by-layer assembled highly adhesive microgel films. Polymer 54 (2013), 4220–4226.
87. [87] Serpe, M.J., Yarmey, K.A., Nolan, C.M., Lyon, L.A., Doxorubicin uptake and release from microgel thin films. Biomacromolecules 6 (2005), 408–413.
88. [88] Nolan, C.M., Serpe, M.J., Lyon, L.A., Thermally modulated insulin release from microgel thin films. Biomacromolecules 5 (2004), 1940–1946.
89. [89] Nolan, C.M., Serpe, M.J., Lyon, L.A., Pulsatile release of insulin from layer-by-layer assembled microgel thin films. Macromol Symp 227 (2005), 285–294.
90. [90] Gan, D., Lyon, L.A., Synthesis and protein adsorption resistance of PEG-modified poly(N-isopropylacrylamide) core/shell microgels. Macromolecules 35 (2002), 9634–9639.
91. [91] Veronese, F.M., Mero, A., The impact of PEGylation on biological therapies. BioDrugs: Clinical Immunotherapeutics, Biopharmaceuticals and Gene Therapy 22 (2008), 315–329.
92. [92] Sahay, G., Alakhova, D.Y., Kabanov, A.V., Endocytosis of nanomedicines. Journal of Controlled Release: Official Journal of the Controlled Release Society 145 (2010), 182–195.
93. [93] Nolan, C.M., Reyes, C.D., Debord, J.D., Garcia, A.J., Lyon, L.A., Phase transition behavior, protein adsorption, and cell adhesion resistance of poly(ethylene glycol) crosslinked microgel particles. Biomacromolecules 6 (2005), 2032–2039.
94. [94] Scott, E.A., Nichols, M.D., Cordova, L.H., George, B.J., Jun, Y.S., Elbert, D.L., Protein adsorption and cell adhesion on nanoscale bioactive coatings formed from poly(ethylene glycol) and albumin microgels. Biomaterials 29 (2008), 4481–4493.
95. [95] South, A.B., Whitmire, R.E., Garcia, A.J., Lyon, L.A., Centrifugal deposition of microgels for the rapid assembly of nonfouling thin films. ACS Appl Mater Interfaces 1 (2009), 2747–2754.
96. [96] Wang, Q., Uzunoglu, E., Wu, Y., Libera, M., Self-assembled poly(ethylene glycol)-co-acrylic acid microgels to inhibit bacterial colonization of synthetic surfaces. ACS Appl Mater Interfaces 4 (2012), 2498–2506.
97. [97] Wang, Q., Libera, M., Microgel-modified surfaces enhance short-term osteoblast response. Colloids Surf B: Biointerfaces 118 (2014), 202–209.
98. [98] Tsai, H.Y., Vats, K., Yates, M.Z., Benoit, D.S., Two-dimensional patterns of poly(N-isopropylacrylamide) microgels to spatially control fibroblast adhesion and temperature-responsive detachment. Langmuir 29 (2013), 12183–12193.
99. [99] Lynch, I., Miller, I., Gallagher, W.M., Dawson, K.A., Novel method to prepare morphologically rich polymeric surfaces for biomedical applications via phase separation and arrest of microgel particles. J Phys Chem B 110 (2006), 14581–14589.
100. [100] Li, Y., Chen, P., Wang, Y., Yan, S., Feng, X., Du, W., et al. Rapid assembly of heterogeneous 3D cell microenvironments in a microgel array. Adv Mater 28 (2016), 3543–3548.
101. [101] Bridges, A.W., Singh, N., Burns, K.L., Babensee, J.E., Lyon, L.A., Garcia, A.J., Reduced acute inflammatory responses to microgel conformal coatings. Biomaterials 29 (2008), 4605–4615.
102. [102] Bridges, A.W., Whitmire, R.E., Singh, N., Templeman, K.L., Babensee, J.E., Lyon, L.A., et al. Chronic inflammatory responses to microgel-based implant coatings. J Biomed Mater Res, Part A 94A (2010), 252–258.
103. [103] Gutowski, S.M., Templeman, K.L., South, A.B., Gaulding, J.C., Shoemaker, J.T., LaPlaca, M.C., et al. Host response to microgel coatings on neural electrodes implanted in the brain. J Biomed Mater Res A 102 (2014), 1486–1499.
104. [104] da Silva, R.M.P., Mano, J.F., Reis, R.L., Smart thermoresponsive coatings and surfaces for tissue engineering: switching cell-material boundaries. Trends Biotechnol 25 (2007), 577–583.
105. [105] Schmidt, S., Zeiser, M., Hellweg, T., Duschl, C., Fery, A., Möhwald, H., Adhesion and mechanical properties of PNIPAM microgel films and their potential use as switchable cell culture substrates. Adv Funct Mater 20 (2010), 3235–3243.
106. [106] Uhlig, K., Wegener, T., He, J., Zeiser, M., Bookhold, J., Dewald, I., et al. Patterned thermoresponsive microgel coatings for noninvasive processing of adherent cells. Biomacromolecules 17 (2016), 1110–1116.
107. [107] Islam, M.R., Li, X., Smyth, K., Serpe, M.J., Polymer-based muscle expansion and contraction. Angew Chem 125 (2013), 10520–10523.
108. [108] Hong, F., Xie, L., He, C., Liu, J., Zhang, G., Wu, C., Novel hybrid anti-biofouling coatings with a self-peeling and self-generated micro-structured soft and dynamic surface. J Mater Chem B 1 (2013), 2048–2055.
109. [109] Malmsten, M., Inorganic nanomaterials as delivery systems for proteins, peptides, DNA, and siRNA. Curr Opin Colloid Interface Sci 18 (2013), 468–480.
110. [110] Vihola, H., Laukkanen, A., Valtola, L., Tenhu, H., Hirvonen, J., Cytotoxicity of thermosensitive polymers poly(N-isopropylacrylamide), poly(N-vinylcaprolactam) and amphiphilically modified poly(N-vinylcaprolactam). Biomaterials 26 (2005), 3055–3064.
111. [111] Zhu, R., Wu, G., Liu, X., Shi, D., Cao, B., Gu, R., et al. PNIPAM hydrogel induces skeletal muscle inflammation response. RSC Adv 5 (2015), 28023–28029.
112. [112] Malonne, H., Eeckman, F., Fontaine, D., Otto, A., Vos, L.D., Moës, A., et al. Preparation of poly(N-isopropylacrylamide) copolymers and preliminary assessment of their acute and subacute toxicity in mice. Eur J Pharm Biopharm 61 (2005), 188–194.
113. [113] Wadajkar, A.S., Koppolu, B., Rahimi, M., Nguyen, K.T., Cytotoxic evaluation of N-isopropylacrylamide monomers and temperature-sensitive poly(N-isopropylacrylamide) nanoparticles. J Nanopart Res 11 (2009), 1375–1382.