Integrating crane information models in BIM for checking the compliance of lifting plan requirements

ISARC 2016 - 33rd International Symposium on Automation and Robotics in Construction

Volumn , Issue , 2016, Pages 966-974

  Yeoh, Justin K W ^a   Wong, J H ^a   Peng, L ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

Construction Requirements; Crane Information Model; Crane Lifting Plans; Regulatory Compliance

Indexed keywords

ARCHITECTURAL DESIGN; CONSTRUCTION EQUIPMENT; CRANES; INFORMATION THEORY; REGULATORY COMPLIANCE; ROBOTICS;

CONSTRUCTION REQUIREMENTS; CONSTRUCTION SITES; EQUIPMENT INVESTMENT; ERROR-PRONE PROCESS; INFORMATION MODELING; INFORMATION MODELS; OPERATIONAL REQUIREMENTS; SAFETY INFORMATION;

COMPLIANCE CONTROL;

EID: 84994257517     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.22260/isarc2016/0116     Document Type: Conference Paper

References (25)

1. M. Al-Hussein, M. Athar Niaz, H. Yu, H. Kim, Integrating 3D visualization and simulation for tower crane operations on construction sites, Autom. Constr. 15 (2006) 554-562. doi:10.1016/j.autcon.2005.07.007.
2. A. Shapira, M. Simcha, Identification and Analysis of Factors Affecting Safety on Construction Sites with Tower Cranes, J. Constr. Eng. Manag. 135 (2009) 307-318. doi:10.1061/(ASCE)0733-9364(2009)135:4(307).
3. Workplace Safety and Health Report 2014, A report by the Workplace Safety and Health Institute Singapore, 2015.
4. A. Shapira, M. Simcha, M. Goldenberg, Integrative model for quantitative evaluation of safety on construction sites with tower cranes, J. Constr. Eng. Manag. 138 (2012) 1281-1293. doi:10.1061/(ASCE)CO.1943-7862.0000537.
5. Code of Practice on Safe Lifting Operations in the Workplaces, Workplace Safety and Health Council, 2011.
6. M. Al-Hussein, S. Alkass, O. Moselhi, DCRANE: a database system for utilization of cranes, Can. J. Civ. Eng. 27 (2000) 1130-1138. doi:10.1139/l00-039.
7. D.R. Riley, V.E. Sanvido, Patterns of Construction-Space Use in Multistory Buildings, J. Constr. Eng. Manag. 121 (1995) 464-473.
8. B. Akinci, M. Fischer, J. Kunz, R. Levitt, Representing Work Spaces Generically in Construction Method Models, J. Constr. Eng. Manag. 128 (2002) 296-305. doi:10.1061/(ASCE)0733-9364(2002)128:4(296).
9. B. Akinci, M. Fischer, R. Levitt, R. Carlson, Formalization and Automation of Time-Space Conflict Analysis, J. Comput. Civ. Eng. 16 (2002) 124-134. doi:10.1061/(ASCE)0887-3801(2002)16:2(124).
10. S.J. Guo, Identification and resolution of work space conflicts in building construction, J. Constr. Eng. Manag. 128 (2002) 287-295. doi:10.1061/(ASCE)0733-9364(2002)128:4(287).
11. D.K.H. Chua, K.W. Yeoh, Y. Song, Quantification of Spatial Temporal Congestion in Four-Dimensional Computer-Aided Design., J. Constr. Eng. Manag. 136 (2010) 641-649. doi:10.1061/(ASCE)CO.1943-7862.0000166.
12. X. Su, H. Cai, Enabling Construction 4D Topological Analysis for Effective Construction Planning, J. Comput. Civ. Eng. (2014) 1-10. doi:10.1061/(ASCE)CP.1943-5487.0000463.
13. X. Tan, A. Hammad, P. Fazio, Automated Code Compliance Checking for Building Envelope Design, J. Comput. Civ. Eng. 24 (2010) 203-211. doi:10.1061/(ASCE)0887-3801(2010)24:2(203).
14. S. Malsane, J. Matthews, S. Lockley, P.E.D. Love, D. Greenwood, Development of an object model for automated compliance checking, Autom. Constr. 49 (2015) 51-58. doi:10.1016/j.autcon.2014.10.004.
15. B.T. Zhong, L.Y. Ding, H.B. Luo, Y. Zhou, Y.Z. Hu, H.M. Hu, Ontology-based semantic modeling of regulation constraint for automated construction quality compliance checking, Autom. Constr. 28 (2012) 58-70. doi:10.1016/j.autcon.2012.06.006.
16. C. Huang, C.K. Wong, C.M. Tam, Optimization of tower crane and material supply locations in a high-rise building site by mixed-integer linear programming, Autom. Constr. 20 (2011) 571-580. doi:10.1016/j.autcon.2010.11.023.
17. C.M. Tam, T.K.L. Tong, GA-ANN model for optimizing the locations of tower crane and supply points for high-rise public housing construction, Constr. Manag. Econ. 21 (2003) 257-266. doi:10.1080/0144619032000049665.
18. W.C. Hornaday, C.T. Haas, J.T. O'Connor, J. Wen, Computer-Aided Planning for Heavy Lifts, J. Constr. Eng. Manag. 119 (1994) 498-515.
19. K. Tantisevi, B. Akinci, Transformation of a 4D product and process model to generate motion of mobile cranes, Autom. Constr. 18 (2009) 458-468. doi:10.1016/j.autcon.2008.10.008.
20. J. Irizarry, E.P. Karan, Optimizing location of tower cranes on construction sites through GIS and BIM integration, Electron. J. Inf. Technol. Constr. 17 (2012) 361-366.
21. J. Olearczyk, M. Al-Hussein, A. Bouferguène, Evolution of the crane selection and on-site utilization process for modular construction multilifts, Autom. Constr. 43 (2014) 59-72. doi:10.1016/j.autcon.2014.03.015.
22. M. Marzouk, A. Abubakr, Decision support for tower crane selection with building information models and genetic algorithms, Autom. Constr. 61 (2015) 1-15. doi:10.1016/j.autcon.2015.09.008.
23. J. Wang, X. Zhang, W. Shou, X. Wang, B. Xu, M.J. Kim, et al., A BIM-based approach for automated tower crane layout planning, Autom. Constr. 59 (2015) 168-178. doi:10.1016/j.autcon.2015.05.006.
24. Y. Song, D.K.H. Chua, Modeling of Functional Construction Requirements for Constructability Analysis, J. Constr. Eng. Manag. 132 (2006) 1314-1326. doi:10.1061/(ASCE)0733-9364(2006)132:12(1314).
25. K.W. Yeoh, D.K.H. Chua, Representing Requirements of Construction from an IFC Model, in: Comput. Civ. Build. Eng. 2014, American Society of Civil Engineers, 2014: pp. 331-338. doi:doi:10.1061/9780784413616.042.