Nanocellulose-enabled electronics, energy harvesting devices, smart materials and sensors: A review

Journal of Renewable Materials

Volumn 4, Issue 5, 2016, Pages 297-312

  Sabo, Ronald ^a   Yermakov, Aleksey ^b   Law, Chiu Tai ^b   Elhajjar, Rani ^b  

^a FOREST PRODUCTS LABORATORY   (United States)

^b University of Wisconsin Milwaukee   (United States)

Author keywords

Batteries; Cellulose nanocrystals; Cellulose nanofibrils; Flexible electronics; Magnetostrictive composites; Photovoltaics

Indexed keywords

CELLULOSE NANOCRYSTALS; ENERGY HARVESTING; FLEXIBLE DISPLAYS; FLEXIBLE ELECTRONICS; LITHIUM-ION BATTERIES; MAGNETOSTRICTIVE DEVICES; MEMBRANES; NANOCELLULOSE; NANOFIBERS; SOLAR CELLS; SUBSTRATES; THERMAL EXPANSION;

ADVANCED APPLICATIONS; CELLULOSE NANOFIBRILS; ELECTRONICS APPLICATIONS; ENERGY HARVESTING DEVICE; LOW COEFFICIENT OF THERMAL EXPANSIONS; MAGNETOSTRICTIVE COMPOSITES; PHOTOVOLTAICS; STIMULI-RESPONSIVE MATERIALS;

CELLULOSE;

EID: 84992215289     PISSN: 21646325     EISSN: 21646341     Source Type: Journal    
DOI: 10.7569/JRM.2016.634114     Document Type: Review

References (135)

1. S. Innami and Y. Fukui, Additive composition for foods or drugs, US Patent 4659388, assigned to Daicel Chemical Industries, Ltd. (April 21, 1987).
2. C. J. Grande, F. G. Torres, C. M. Gomez, and M. C. Bañó, Nanocomposites of bacterial cellulose/hydroxyapatite for biomedical applications. Acta Biomater. 5(5), 1605-1615 (2009).
3. N. Lin and A. Dufresne, Nanocellulose in biomedicine: Current status and future prospect. Eur. Polym. J. 59, 302-325 (2014).
4. P. Gatenholm and D. Klemm, Bacterial nanocellulose as a renewable material for biomedical applications. MRS Bull. 35(03), 208-213 (2010).
5. N. Petersen and P. Gatenholm, Bacterial cellulose-based materials and medical devices: Current state and perspectives. Appl. Microbiol. Biotechnol. 91(5), 1277-1286 (2011).
6. A. P. Mathew, K. Oksman, D. Pierron, and M. F. Harmand, Biocompatible fibrous networks of cellulose nanofibres and collagen crosslinked using genipin: Potential as artificial ligament/tendons. Macromol. Biosci. 13(3), 289-298 (2013).
7. A. P. Mathew, K. Oksman, D. Pierron, and M.-F. Harmad, Crosslinked fibrous composites based on cellulose nanofibers and collagen with in situ pH induced fibrillation. Cellulose 19(1), 139-150 (2012).
8. D. Klemm, F. Kramer, S. Moritz, T. Lindström, M. Ankerfors, D. Gray, and A. Dorris, Nanocelluloses: A new family of nature-based materials. Angew. Chem. Int. Ed. 50(24), 5438-5466 (2011).
9. F. W. Brodin, Ø. W. Gregersen, and K. Syverud, Cellulose nanofibrils: Challenges and possibilities as a paper additive or coating material-A review. Nord. Pulp Pap. Res. J. 29(1), 156-166 (2014).
10. C. Hii, Ø. W. Gregersen, G. Chinga-Carrasco, and Ø. Eriksen, The effect of MFC on the pressability and paper properties of TMP and GCC based sheets. Nord. Pulp Pap. Res. J. 27(2), 388-396 (2012).
11. K. Mörseburg and G. Chinga-Carrasco, Assessing the combined benefits of clay and nanofibrillated cellulose in layered TMP-based sheets. Cellulose 16(5), 795-806 (2009).
12. R. Guimond, B. Chabot, K. N. Law, and C. Daneault, The use of cellulose nanofibres in papermaking. J. Pulp Pap. Sci. 36(1), 55-61 (2010).
13. K. Syverud, A novel application of cellulose nanofibrils for improving the water resistance of commercial paints, in: Eleventh International Conference on Wood and Biofiber Plastic Composites, (2011).
14. K. Dimic-Misic, T. Salo, J. Paltakari, and P. Gane, Comparing the rheological properties of novel nanofibrillar cellulose-formulated pigment coating colours with those using traditional thickener. Nord. Pulp Pap. Res. J. 29(2), 253-270 (2014).
15. K. Dimic-Misic, P. A. C. Gane, and J. Paltakari, Microand nanofibrillated cellulose as a rheology modifier additive in CMC-containing pigment-coating formulations. Ind. Eng. Chem. Res. 52(45), 16066-16083 (2013).
16. J. Cowie, E. M. Bilek, T. H. Wegner, and J. A. Shatkin, Market projections of cellulose nanomaterial-enabled products - Part 2: Volume estimates. TAPPI J. 13(6), 57-69 (2014).
17. J. A. Shatkin, T. H. Wegner, E. M. Bilek, and J. Cowie, Market projections of cellulose nanomaterial-enabled products - Part 1: Applications. TAPPI J. 13(5), 9-16 (2014).
18. J.-F. Revol, L. Godbout, and D. G. Gray, Solidified Liquid Crystals of Cellulose with Optically Variable Properties, US Patent 5, 629, 055, assigned to Pulp and Paper Research Institute of Canada, (May 13, 1997).
19. J. P. F. Lagerwall, C. Schütz, M. Salajkova, J. Noh, J. H. Park, G. Scalia, and L. Bergström, Cellulose nanocrystal-based materials: From liquid crystal self-assembly and glass formation to multifunctional thin films. NPG Asia Mater. 6(1), e80 (2014).
20. S. Beck, J. Bouchard, and R. Berry, Controlling the reflection wavelength of iridescent solid films of nanocrystalline cellulose. Biomacromolecules 12(1), 167-172 (2010).
21. N. Lavoine, I. Desloges, A. Dufresne, and J. Bras, Microfibrillated cellulose - Its barrier properties and applications in cellulosic materials: A review. Carbohydr. Polym. 90(2), 735-764 (2012).
22. E. L. Bradley, L. Castle, and Q. Chaudhry, Applications of nanomaterials in food packaging with a consideration of opportunities for developing countries. Trends Food Sci. Technol. 22(11), 604-610 (2011).
23. E. Fortunati, I. Armentano, Q. Zhou, A. Iannoni, E. Saino, L. Visai, L. A. Berglund, and J. M. Kenny, Multifunctional bionanocomposite films of poly (lactic acid), cellulose nanocrystals and silver nanoparticles. Carbohydr. Polym. 87(2), 1596-1605 (2012).
24. E. Fortunati, M. Peltzer, I. Armentano, L. Torre, A. Jiménez, and J. M. Kenny, Effects of modified cellulose nanocrystals on the barrier and migration properties of PLA nano-biocomposites. Carbohydr. Polym. 90(2), 948-956 (2012).
25. J. George, High performance edible nanocomposite films containing bacterial cellulose nanocrystals. Carbohydr. Polym. 87(3), 2031-2037 (2012).
26. E.-L. Hult, M. Iotti, and M. Lenes, Efficient approach to high barrier packaging using microfibrillar cellulose and shellac. Cellulose 17(3), 575-586 (2010).
27. N. Lavoine, I. Desloges, and J. Bras, Microfibrillated cellulose coatings as new release systems for active packaging. Carbohydr. Polym. 103, 528-537 (2014).
28. J.-H. Seo, T.-H. Chang, J. Lee, R. Sabo, W. Zhou, Z. Cai, S. Gong, and Z. Ma, Microwave flexible transistors on cellulose nanofibrillated fiber substrates. Appl. Phys. Lett. 106(26), 262101 (2015).
29. J. Huang, H. Zhu, Y. Chen, C. Preston, K. Rohrbach, J. Cumings, and L. Hu, Highly transparent and flexible nanopaper transistors. ACS Nano 7(3), 2106-2113 (2013).
30. R. Sabo, J.-H. Seo, and Z. Ma, Cellulose nanofiber composite substrates for flexible electronics, in: 2012 TAPPI International Conference on Nanotechnology for Renewable Materials, Montreal, Quebec, Canada (2012).
31. Y. H. Jung, T.-H. Chang, H. Zhang, C. Yao, Q. Zheng, V. W. Yang, H. Mi, M. Kim, S. J. Cho, and D.-W. Park, High-performance green flexible electronics based on biodegradable cellulose nanofibril paper. Nat. Commun. 6, article no. 7170, DOI: 10.1038/ncomms8170 (2015).
32. H. Zhu, B. B. Narakathu, Z. Fang, A. Tausif Aijazi, M. Joyce, M. Atashbar, and L. Hu, A gravure printed antenna on shape-stable transparent nanopaper. Nanoscale 6(15), 9110-9115 (2014).
33. Z. Fang, H. Zhu, Y. Yuan, D. Ha, S. Zhu, C. Preston, Q. Chen, Y. Li, X. Han, and S. Lee, Novel nanostructured paper with ultrahigh transparency and ultrahigh haze for solar cells. Nano Lett. 14(2), 765-773 (2014).
34. L. Hu, G. Zheng, J. Yao, N. Liu, B. Weil, M. Eskilsson, E. Karabulut, Z. Ruan, S. Fan, J. T. Bloking, M. D. McGehee, L. Wagberg, and Y. Cui, Transparent and conductive paper from nanocellulose fibers. Energ. Environ. Sci. 6(2), 513-518 (2013).
35. Y. Luo, J. Zhang, X. Li, C. Liao, and X. Li, The cellulose nanofibers for optoelectronic conversion and energy storage. J. Nanomater. 2014 (2014).
36. Y. Zhou, T. M. Khan, J.-C. Liu, C. Fuentes-Hernandez, J. W. Shim, E. Najafabadi, J. P. Youngblood, R. J. Moon, and B. Kippelen, Efficient recyclable organic solar cells on cellulose nanocrystal substrates with a conducting polymer top electrode deposited by film-transfer lamination. Org. Electron. 15(3), 661-666 (2014).
37. U. S. Environmental Protection Agency, Electronics waste management in the United States through 2009, U. S. E. P. Agency http://www.epa.gov/wastes/conserve/materials/ecycling/docs/fullbaselinereport2011. pdf (2011).
38. M. Iguchi, S. Yamanaka, and A. Budhiono, Bacterial cellulose-a masterpiece of nature's arts. J. Mater. Sci. 35(2), 261-270 (2000).
39. G. Guhados, W. Wan, and J. L. Hutter, Measurement of the elastic modulus of single bacterial cellulose fibers using atomic force microscopy. Langmuir 21(14), 6642-6646 (2005).
40. C. Legnani, C. Vilani, V. L. Calil, H. S. Barud, W. G. Quirino, C. A. Achete, S. J. L. Ribeiro, and M. Cremona, Bacterial cellulose membrane as flexible substrate for organic light emitting devices. Thin Solid Films 517(3), 1016-1020 (2008).
41. M. Nogi and H. Yano, Transparent nanocomposites based on cellulose produced by bacteria offer potential innovation in the electronics device industry. Adv. Mater. 20(10), 1849-1852 (2008).
42. L. Deng, R. J. Young, I. A. Kinloch, A. M. Abdelkader, S. M. Holmes, D. A. De Haro-Del Rio, and S. J. Eichhorn, Supercapacitance from cellulose and carbon nanotube nanocomposite fibers. ACS Appl. Mater. Interfaces 5(20), 9983-9990 (2013).
43. R. J. Moon, A. Martini, J. Nairn, J. Simonsen, and J. Youngblood, Cellulose nanomaterials review: Structure, properties and nanocomposites. Chem. Soc. Rev. 40(7), 3941-3994 (2011).
44. I. Sakurada, Y. Nukushina, and T. Ito, Experimental determination of the elastic modulus of crystalline regions in oriented polymers. J. Polym. Sci. 57(165), 651-660 (1962).
45. S. J. Eichhorn, C. A. Baillie, N. Zafeiropoulos, L. Y. Mwaikambo, M. P. Ansell, A. Dufresne, K. M. Entwistle, P. J. Herrera-Franco, G. C. Escamilla, L. Groom, M. Hughes, C. Hill, T. G. Rials, and P. M. Wild, Review: Current international research into cellulosic fibres and composites. J. Mater. Sci. 36(9), 2107-2131 (2001).
46. M. A. S. Azizi Samir, F. Alloin, and A. Dufresne, Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromolecules 6(2), 612-626 (2005).
47. I. Siró and D. Plackett, Microfibrillated cellulose and new nanocomposite materials: A review. Cellulose 17(3), 459-494 (2010).
48. T. Saito, M. Hirota, N. Tamura, S. Kimura, H. Fukuzumi, L. Heux, and A. Isogai, Individualization of nano-sized plant cellulose fibrils by direct surface carboxylation using TEMPO catalyst under neutral conditions. Biomacromolecules 10(7), 1992-1996 (2009).
49. Y. Qing, R. Sabo, J. Y. Zhu, U. Agarwal, Z. Cai, and Y. Wu, A comparative study of cellulose nanofibrils disintegrated via multiple processing approaches. Carbohydr. Polym. 97(1), 226-234 (2013).
50. MatWeb. Tensile property testing of plastics, http://www.matweb.com/reference/tensilestrength.aspx (2016).
51. S. H. Jin, Y.-B. Park, and K. H. Yoon, Rheological and mechanical properties of surface modified multiwalled carbon nanotube-filled PET composite. Compos. Sci. Technol. 67(15-16), 3434-3441 (2007).
52. Y. Sun and J. A. Rogers, Inorganic semiconductors for flexible electronics. Adv. Mater. 19(15), 1897-1916 (2007).
53. H. Fukuzumi, T. Saito, T. Iwata, Y. Kumamoto, and A. Isogai, Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation. Biomacromolecules 10(1), 162-165 (2009).
54. A. N. Nakagaito, M. Nogi, and H. Yano, Displays from transparent films of natural nanofibers. MRS Bull. 35(03), 214-218 (2010).
55. M. Nogi, S. Iwamoto, A. N. Nakagaito, and H. Yano, Optically transparent nanofiber paper. Adv. Mater. 21(16), 1595-1598 (2009).
56. Y. Okahisa, A. Yoshida, S. Miyaguchi, and H. Yano, Optically transparent wood-cellulose nanocomposite as a base substrate for flexible organic light-emitting diode displays. Compos. Sci. Technol. 69(11), 1958-1961 (2009).
57. S. Iwamoto, A. N. Nakagaito, and H. Yano, Nanofibrillation of pulp fibers for the processing of transparent nanocomposites. Appl. Phys. A: Mater. Sci. Process. 89(2), 461-466 (2007).
58. H. Yano, J. Sugiyama, A. N. Nakagaito, M. Nogi, T. Matsuura, M. Hikita, and K. Handa, Optically transparent composites reinforced with networks of bacterial nanofibers. Adv. Mater. 17(2), 153-155 (2005).
59. C. Preston, Z. Fang, J. Murray, H. Zhu, J. Dai, J. N. Munday, and L. Hu, Silver nanowire transparent conducting paper-based electrode with high optical haze. J. Mater. Chem. C. 2(7), 1248-1254 (2014).
60. E. D. Cranston and D. G. Gray, Morphological and Optical Characterization of Polyelectrolyte Multilayers Incorporating Nanocrystalline Cellulose. Biomacromolecules 7(9), 2522-2530 (2006).
61. T. Nishino, I. Matsuda, and K. Hirao, All-cellulose composite. Macromolecules 37(20), 7683-7687 (2004).
62. S. Ifuku, M. Nogi, K. Abe, K. Handa, F. Nakatsubo, and H. Yano, Surface modification of bacterial cellulose nanofibers for property enhancement of optically transparent composites: Dependence on acetyl-group DS. Biomacromolecules 8(6), 1973-1978 (2007).
63. H. Yagyu, T. Saito, A. Isogai, H. Koga, and M. Nogi, Chemical modification of cellulose nanofibers for the production of highly thermal resistant and optically transparent nanopaper for paper devices. ACS Appl. Mater. Interfaces. 7(39), 22012-22017 (2015).
64. X. Zheng, Y. Zhou, J. Liu, and A. Li, Use of nanomechanical fracture-testing for determining the interfacial adhesion of PZT ferroelectric thin films. Surf. Coat. Tech. 176(1), 67-74 (2003).
65. Y. Saito, H. Takao, T. Tani, T. Nonoyama, K. Takatori, T. Homma, T. Nagaya, and M. Nakamura, Lead-free piezoceramics. Nature, 432(7013), 84-87 (2004).
66. C. D. Richards, M. J. Anderson, D. F. Bahr, and R. F. Richards, Efficiency of energy conversion for devices containing a piezoelectric component. J. Micromech. Microeng. 14(5), 717-721 (2004).
67. S. Roundy, P. K. Wright, and J. Rabaey, A study of low level vibrations as a power source for wireless sensor nodes. Comput. Commun. 26(11), 1131-1144 (2003).
68. 3-based lead-free piezoceramics. J. Appl. Phys. 110(9), 094108 (2011).
69. T. Bove, K. Liang, and W. Wolny, Experimental study of temperature & pressure effects on high-porosity PZT materials, in: Ultrasonics Symposium (IUS), 2012 IEEE International, IEEE (2012).
70. K. Franke, H. Huelz, and M. Weihnacht, Stress-induced depolarization in PZT thin films, measured by means of electric force microscopy. Surface Science 416(1), 59-67 (1998).
71. Q. Jiang and L. Cross, Effects of porosity on electric fatigue behaviour in PLZT and PZT ferroelectric ceramics. J. Mater. Sci. 28(16), 4536-4543 (1993).
72. 3 films. Appl. Phys. Lett. 69(21), 3191-3193 (1996).
73. G. Chinga-Carrasco, D. Tobjörk, and R. Österbacka, Inkjet-printed silver nanoparticles on nano-engineered cellulose films for electrically conducting structures and organic transistors: Concept and challenges. J. Nanopart. Res. 14(11), 1-10 (2012).
74. T. Shimaoka, Development of transparent cellulose nano fiber film for flexible displays, in: 2015 TAPPI International Conference on Nanotechnology for Renewable Materials, Atlanta, GA (2015).
75. K. Torvinen, J. Sievänen, T. Hjelt, and E. Hellén, Smooth and flexible filler-nanocellulose composite structure for printed electronics applications. Cellulose 19(3), 821-829 (2012).
76. S. Couderc, O. Ducloux, B. J. Kim, and T. Someya, A mechanical switch device made of a polyimidecoated microfibrillated cellulose sheet. J. Micromech. Microeng. 19(5), 055006 (2009).
77. T. T. Nge, M. Nogi, and K. Suganuma, Electrical functionality of inkjet-printed silver nanoparticle conductive tracks on nanostructured paper compared with those on plastic substrates. J. Mater. Chem. C 1(34), 5235-5243 (2013).
78. H. Koga, T. Saito, T. Kitaoka, M. Nogi, K. Suganuma, and A. Isogai, Transparent, conductive, and printable composites consisting of TEMPO-oxidized nanocellulose and carbon nanotube. Biomacromolecules 14(4), 1160-1165 (2013).
79. M. Singh, H. M. Haverinen, P. Dhagat, and G. E. Jabbour, Inkjet printing-process and its applications. Adv. Mater. 22(6), 673-685 (2010).
80. A. Yoshida, A. Sugimoto, T. Miyadera, and S. Miyaguchi, Organic light emitting devices on polymer substrates. J. Photopolym. Sci. Tec. 14(2), 327-332 (2001).
81. S. Beck-Candanedo, M. Roman, and D. G. Gray, Effect of reaction conditions on the properties and behavior of wood cellulose nanocrystal suspensions. Biomacromolecules 6(2), 1048-1054 (2005).
82. C. Teters, W. Kong, M. Taylor, J. Simonsen, M. Lerner, T. Plant, and G. Evans, The cellulose nanocrystal electro-optic effect, in: International Conference on Nanotechnology for the Forest Products Industry, Knoxville, TN, (2007).
83. H. Oulachgar, M. Bolduc, G. Chauve, Y. Desroches, P. Beaupre, J. Bouchard, and P. Galarneau, Fabrication and electro-optical characterization of a nanocellulosebased spatial light modulator. MRS Advances, (2015). DOI: 10.1557/adv. 2015.34
84. L. Jabbour, C. Gerbaldi, D. Chaussy, E. Zeno, S. Bodoardo, and D. Beneventi, Microfibrillated cellulosegraphite nanocomposites for highly flexible paper-like Li-ion battery electrodes. J. Mater. Chem. 20(35), 7344-7347 (2010).
85. L. Jabbour, R. Bongiovanni, D. Chaussy, C. Gerbaldi, and D. Beneventi, Cellulose-based Li-ion batteries: A review. Cellulose 20(4), 1523-1545 (2013).
86. M. Schroers, A. Kokil, and C. Weder, Solid polymer electrolytes based on nanocomposites of ethylene oxide.epichlorohydrin copolymers and cellulose whiskers. J. Appl. Polym. Sci. 93(6), 2883-2888 (2004).
87. L. Hu, N. Liu, M. Eskilsson, G. Zheng, J. McDonough, L. Wagberg, and Y. Cui, Silicon-conductive nanopaper for Li-ion batteries. Nano Energy 2(1), 138-145 (2013).
88. S. Leijonmarck, A. Cornell, G. Lindbergh, and L. Wågberg, Single-paper flexible Li-ion battery cells through a paper-making process based on nanofibrillated cellulose. J. Mater. Chem. A 1(15), 4671-4677 (2013).
89. A. Chiappone, J. R. Nair, C. Gerbaldi, L. Jabbour, R. Bongiovanni, E. Zeno, D. Beneventi, and N. Penazzi, Microfibrillated cellulose as reinforcement for Li-ion battery polymer electrolytes with excellent mechanical stability. J. Power Sources 196(23), 10280-10288 (2011).
90. G. Nyström, A. Razaq, M. Stromme, L. Nyholm, and A. Mihranyan, Ultrafast all-polymer paper-based batteries. Nano Lett. 9(10), 3635-3639 (2009).
91. S.-J. Chun, E.-S. Choi, E.-H. Lee, J. H. Kim, S.-Y. Lee, and S.-Y. Lee, Eco-friendly cellulose nanofiber paperderived separator membranes featuring tunable nanoporous network channels for lithium-ion batteries. J. Mater. Chem. 22(32), 16618-16626 (2012).
92. L. Nyholm, G. Nystrom, A. Mihranyan, and M. Strømme, Toward flexible polymer and paper-based energy storage devices. Adv. Mater. 23(33), 3751-3769 (2011).
93. Y. Zhou, C. Fuentes-Hernandez, T. M. Khan, J.-C. Liu, J. Hsu, J. W. Shim, A. Dindar, J. P. Youngblood, R. J. Moon, and B. Kippelen, Recyclable organic solar cells on cellulose nanocrystal substrates. Sci. Rep. 3 (2013).
94. G. Zheng, Y. Cui, E. Karabulut, L. Wågberg, H. Zhu, and L. Hu, Nanostructured paper for flexible energy and electronic devices. MRS Bull. 38(4), 320-325 (2013).
95. H. Choi and H. Yoon, Nanostructured electrode materials for electrochemical capacitor applications. Nanomaterials 5(2), 906-936 (2015).
96. K.-Y. Lee, H. Qian, F. H. Tay, J. J. Blaker, S. G. Kazarian, and A. Bismarck, Bacterial cellulose as source for activated nanosized carbon for electric double layer capacitors. J. Mater. Sci. 48(1), 367-376 (2013).
97. H. Wang, E. Zhu, J. Yang, P. Zhou, D. Sun, and W. Tang, Bacterial cellulose nanofiber-supported polyaniline nanocomposites with flake-shaped morphology as supercapacitor electrodes. J. Phys. Chem. C 116(24), 13013-13019 (2012).
98. X. D. Zhang, Z. Y. Lin, B. Chen, W. Zhang, S. Sharma, W. T. Gu, and Y. L. Deng, Solid-state flexible polyaniline/silver cellulose nanofibrils aerogel supercapacitors. J. Power Sources 246, 283-289 (2014).
99. S. Y. Liew, W. Thielemans, and D. A. Walsh, Electrochemical capacitance of nanocomposite polypyrrole/cellulose films. J. Phys. Chem. C 114(41), 17926-17933 (2010).
100. J. Peng, H. Zhang, Q. Zheng, C. M. Clemons, R. C. Sabo, S. Gong, Z. Ma, and L.-S. Turng, A composite generator film impregnated with orientated cellulose nanocrystals for enhanced triboelectric performance. Nano Energy, (submitted) (2016).
101. J. Peng, Nanocellulose as reinforcement and nucleating agents for solid and foamed component and as dielectric filler for triboelectric generator, in: Mechanical Engineering, University of Wisconsin: Madison, WI, pp. 99-123 (2015).
102. P. Tingaut, T. Zimmermann, and G. Sèbe, Cellulose nanocrystals and microfibrillated cellulose as building blocks for the design of hierarchical functional materials. J. Mater. Chem. 22(38), 20105-20111 (2012).
103. L. J. Nielsen, S. Eyley, W. Thielemans, and J. W. Aylott, Dual fluorescent labelling of cellulose nanocrystals for pH sensing. Chem. Commun. 46(47), 8929-8931 (2010).
104. J. V. Edwards, N. Prevost, K. Sethumadhavan, A. Ullah, and B. Condon, Peptide conjugated cellulose nanocrystals with sensitive human neutrophil elastase sensor activity. Cellulose 20(3), 1223-1235 (2013).
105. L. Zhang, Q. Li, J. Zhou, and L. Zhang, Synthesis and photophysical behavior of pyrene-bearing cellulose nanocrystals for Fe3+ sensing. Macromol. Chem. Phys. 213(15), 1612-1617 (2012).
106. X. Qiu and S. Hu, "Smart" materials based on cellulose: A review of the preparations, properties, and applications. Materials 6(3), 738-781 (2013).
107. J.-H. Kim, B. S. Shim, H. S. Kim, Y.-J. Lee, S.-K. Min, D. Jang, Z. Abas, and J. Kim, Review of nanocellulose for sustainable future materials. Int. J. Precis. Eng. Man. - Green Technol. 2, 197-213 (2015).
108. Z. Abas, H. S. Kim, J. Kim, and J.-H. Kim, Cellulose electro-active paper: From discovery to technology applications. Frontiers in Materials 1(17), 1-4 (2014).
109. L. Csoka, I. C. Hoeger, O. J. Rojas, I. Peszlen, J. J. Pawlak, and P. N. Peralta, Piezoelectric effect of cellulose nanocrystals thin films. ACS Macro Lett. 1, 867-870 (2012).
110. J.-H. Jeon, I.-K. Oh, C.-D. Kee, and S.-J. Kim, Bacterial cellulose actuator with electrically driven bending deformation in hydrated condition. Sensor. Actuat. B: Chem. 146, 307-313 (2010).
111. S. F. Chin, A. N. B. Romainor, and S. C. Pang, Fabrication of hydrophobic and magnetic cellulose aerogel with high oil absorption capacity. Mater. Lett. 115, 241-243 (2014).
112. R. T. Olsson, M. A. Samir, G. Salazar-Alvarez, L. Belova, V. Ström, L. A. Berglund, O. Ikkala, J. Nogues, and U. W. Gedde, Making flexible magnetic aerogels and stiff magnetic nanopaper using cellulose nanofibrils as templates. Nat. Nanotechnol. 5(8), 584-588 (2010).
113. C. H. Chia, S. Zakaria, K. L. Nguyen, V. Q. Dang, and T. D. Duong, Characterization of magnetic paper using Fourier transform infrared spectroscopy. Mater. Chem. Phys. 113(2), 768-772 (2009).
114. A. C. Small and J. H. Johnston, Novel hybrid materials of magnetic nanoparticles and cellulose fibers. J. Colloid Interface Sci. 331(1), 122-126 (2009).
115. C. Chia, S. Zakaria, K. Nguyen, and M. Abdullah, Utilisation of unbleached kenaf fibers for the preparation of magnetic paper. Ind. Crop. Prod. 28(3), 333-339 (2008).
116. S. Menchaca-Nal, C. Londoño-Calderón, P. Cerrutti, M. Foresti, L. Pampillo, V. Bilovol, R. Candal, and R. Martínez-García, Facile synthesis of cobalt ferrite nanotubes using bacterial nanocellulose as template. Carbohydr. Polym. 137, 726-731 (2016).
117. M. B. Moffett, A. E. Clark, M. Wun-Fogle, J. Linberg, J. P. Teter, and E. A. McLaughlin, Characterization of Terfenol-D for magnetostrictive transducers. J. Acoust. Soc. Am. 89(3), 1448-1455 (1991).
118. F. Claeyssen, N. Lhermet, R. Le Letty, and P. Bouchilloux, Actuators, transducers and motors based on giant magnetostrictive materials. J. Alloys and Compd. 258(1), 61-73 (1997).
119. J. H. Goldie, M. J. Gerver, J. Oleksy, G. P. Carman, and T. A. Duenas, Composite Terfenol-D sonar transducers, in: 1999 Symposium on Smart Structures and Materials, International Society for Optics and Photonics (1999).
120. P. Li, Y. Wen, P. Liu, X. Li, and C. Jia, A magnetoelectric energy harvester and management circuit for wireless sensor network. Sensor. Actuat. A: Phys. 157(1), 100-106 (2010).
121. M. E. Staley and A. B. Flatau, Characterization of energy harvesting potential of Terfenol-D and Galfenol, in: Proceedings of SPIE, International Society for Optical Engineering (2005).
122. T. Ueno and S. Yamada, Performance of energy harvester using iron-gallium alloy in free vibration. IEEE Trans. Magn. 47(10), 2407-2409 (2011).
123. L. Wang and F. Yuan, Vibration energy harvesting by magnetostrictive material. Smart Mater. Struct. 17(4), 045009-045014 (2008).
124. M. Goodfriend and K. Shoop, Adaptive characteristics of the magnetostrictive alloy, Terfenol-D, for active vibration control. J. Intell. Mater. Syst. Struct. 3(2), 245-254 (1992).
125. T.-Z. Wang and Y.-H. Zhou, Nonlinear dynamic model with multi-fields coupling effects for giant magnetostrictive actuators. Int. J. Solids Struct. 50(19), 2970-2979 (2013).
126. S.-J. Moon, C.-W. Lim, B.-H. Kim, and Y. Park, Structural vibration control using linear magnetostrictive actuators. J. Sound Vibration 302(4), 875-891 (2007).
127. A.-G. Olabi and A. Grunwald, Design and application of magnetostrictive materials. Mater. Design 29(2), 469-483 (2008).
128. R. C. Fenn, J. R. Downer, D. A. Bushko, V. Gondhalekar, and N. D. Ham, Terfenol-D driven flaps for helicopter vibration reduction. Smart Mater. Struct. 5(1), 49-57 (1996).
129. T. Duenas and G. Carman, Large magnetostrictive response of Terfenol-D resin composites. J. Appl. Phys. 87(9), 4696-4701 (2000).
130. I. D. Mayergoyz and G. Engdahl, Handbook of Giant Magnetostrictive Materials, Academic Press, San Diego, CA (1999).
131. C. Rodríguez, A. Barrio, I. Orue, J. Vilas, L. León, J. M. Barandiarán, and M. F.-G. Ruiz, High magnetostriction polymer-bonded Terfenol-D composites. Sensor. Actuat. A: Phys. 142(2), 538-541 (2008).
132. J. Kaleta, D. Lewandowski, and R. Mech, Magnetostriction of field-structural composite with Terfenol-D particles. Arch. Civ. Mech. Eng. (2015).
133. R. Elhajjar, V. La Saponara, and A. Muliana, Smart Composites: Mechanics and Design, CRC Press (2013).
134. Y. Qing, R. Sabo, Y. Wu, and Z. Cai, High-performance cellulose nanofibril composite films. Bioresources 7(3), 3064-3075 (2012).
135. R. F. Elhajjar and C. T. Law, Magnetomechanical localglobal effects in magnetostrictive composite materials. Model. Simul. Mater. Sci. Eng. 23(7), 075002 (2015).