Cellulose electro-active paper: From discovery to technology applications

Frontiers in Materials

Volumn 1, Issue , 2014, Pages

  Abas, Zafar ^a   Kim, Heung Soo ^a   Kim, Jaehwan ^b   Kim, Joo Hyung ^b  

^a Dongguk University   (South Korea)

^b Inha University   (South Korea)

Author keywords

Actuator; Cellulose; Electro active paper; Piezoelectrics; Smart material

Indexed keywords

ACTUATORS; BIOCOMPATIBILITY; BIOMIMETICS; CELLULOSE; CELLULOSE FILMS; ELECTROMECHANICAL ACTUATORS; FLEXIBLE DISPLAYS; INTELLIGENT MATERIALS; MEMS; MICROROBOTS;

ELECTRO-ACTIVE PAPERS; ELECTRO-ACTIVE POLYMERS; ELECTROMECHANICAL SYSTEMS; LOW ACTUATION VOLTAGE; LOW-POWER CONSUMPTION; MICRO ELECTRO MECHANICAL SYSTEM; PIEZOELECTRICS; TECHNOLOGY APPLICATION;

ELECTROOPTICAL MATERIALS;

EID: 85058929554     PISSN: None     EISSN: 22968016     Source Type: Journal    
DOI: 10.3389/fmats.2014.00017     Document Type: Short Survey

References (31)

1. Abas, Z., Kim, H. S., Zhai, L., Kim, J., Kim, J. H., (2014a). Electrode effects of a cellulose-based electro-active paper energy harvester. Smart Mater. Struct., 23, 074003.10.1088/0964-1726/23/7/074003.
2. Abas, Z., Kim, H. S., Zhai, L., Kim, J., Kim, J. H., (2014b). Possibility of cellulose-based electro-active paper energy scavenging transducer. J. Nanosci. Nanotechnol., 14, 7458–7462.10.1166/jnn.2014.9566.
3. Deshpande, S. D., Kim, J., Yun, S. R., (2005). Studies on conducting polymer electroactive paper actuators: effect of humidity and electrode thickness. Smart Mater. Struct., 14, 876–880.10.1088/0964-1726/14/4/048.
4. Fukada, E., (2000). History and recent progress in piezoelectric polymers. IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 47, 1277–1290.10.1109/58.883516, 18238673.
5. Jang, S. D., Kim, J. H., Kim, J., (2009). Modeling of electromechanical behavior of chitosan-blended cellulose electroactive paper (EAPap). J. Appl. Phys., 105, 103510–103516.10.1063/1.3129699.
6. Kim, G. H., Ramesh, S., Kim, J. H., Jung, D., Kim, H. S., (2014). Cellulose-silica/gold nanomaterials for electronic applications. J. Nanosci. Nanotechnol., 14, 7495–7501.10.1166/jnn.2014.9551.
7. Kim, H. S., Kim, J., Jung, W., Ampofo, J., Craft, W., Sankar, J., (2008a). Mechanical properties of cellulose electro-active paper under different environmental conditions. Smart Mater. Struct., 17, 015029.10.1088/0964-1726/17/01/015029.
8. Kim, H. S., Li, Y., Kim, J., (2008b). Electro-mechanical behavior and direct piezoelectricity of cellulose electro-active paper. Sens. Actuat. A Phys., 147, 304–309.10.1016/j.sna.2008.05.003.
9. Kim, J., Ampofo, J., Craft, W., Kim, H. S., (2008c). Modeling elastic, viscous and creep characteristics of cellulose electro-active paper. Mech. Mater., 40, 1001–1011.10.1016/j.mechmat.2008.07.001.
10. Kim, J., Yun, S., Lee, S. K., (2008d). Cellulose smart material: possibility and challenges. J. Intell. Mater. Syst. Struct., 19, 417–422.10.1177/1045389X07083140.
11. Kim, H. S., Yang, C., Kim, J., (2009). Hygrothermal behavior of electro-active paper actuator. J. Mech. Sci. Technol., 23, 2285–2290.10.1007/s12206-009-0352-1.
12. Kim, J., Bae, S. H., Lim, H. G., (2006a). Micro transfer printing on cellulose electro-active paper. Smart Mater. Struct., 15, 889–892.10.1088/0964-1726/15/3/026.
13. Kim, J., Yun, S., Ounaies, Z., (2006b). Discovery of cellulose as a smart material. Macromolecules, 39, 4202–4206.10.1088/0957-4484/25/9/092001, 24521757.
14. Kim, J., Jung, W., Kim, H. S., (2007). In-plane strain of electro-active paper under electric fields. Sens. Actuat. A Phys., 140, 225–231.10.1016/j.sna.2007.06.041.
15. Kim, J., Lee, H., Kim, H. S., (2010a). Beam vibration control using cellulose-based electro-active paper sensor. Int. J. Precis. Eng. Manuf., 11, 823–827.10.1007/s12541-010-0099-8.
16. Kim, J., Lee, H., Kim, H. S., Kim, J., (2010b). Vibration sensor characteristics of piezoelectric electro-active paper. J. Intell. Mater. Syst. Struct., 21, 1123–1130.10.1177/1045389X10376679.
17. Kim, J., Seo, Y. B., (2002). Electro-active paper actuators. Smart Mater. Struct., 11, 355–360.10.1088/0964-1726/11/3/305.
18. Kim, J., Yun, G. Y., Kim, J. H., Lee, J., Kim, J. H., (2011). Piezoelectric electro-active paper (EAPap) speaker. J. Mech. Sci. Technol., 25, 2763–2768.10.1007/s12206-011-0718-z.
19. Lee, S., Kim, J. H., Kang, K., Kim, J., Kim, H. S., Yang, C., (2009a). Characterization of micro-scale creep deformation of an electro-active paper actuator. Smart Mater. Struct., 18, 095008.10.1088/0964-1726/18/9/095008.
20. Lee, S. W., Kim, J. H., Kim, J., Kim, H. S., (2009b). Characterization and sensor application of cellulose electro-active paper (EAPap). Chin. Sci. Bull., 54, 2703–2707.10.1007/s11434-009-0219-y.
21. Mahadeva, S. K., Kim, J., Kang, K. S., Kim, H. S., Park, J. M., (2009a). Effect of Poly(ethylene oxide)-Poly(ethylene glycol) addition on actuation behavior of cellulose Electroactive Paper. J. Appl. Polym. Sci., 114, 847–852.10.1002/app.30450.
22. Mahadeva, S. K., Yun, S., Kim, J., (2009b). Dry electroactive paper actuator based on cellulose/poly(ethylene oxide)-poly(ethylene glycol) microcomposite. J. Intell. Mater. Syst. Struct., 20, 1141–1146.10.1177/1045389X09103222.
23. Yang, C., Kim, J. H., Kim, J. H., Kim, J., Kim, H. S., (2009). Piezoelectricity of wet drawn cellulose electro-active paper. Sens. Actuat. A Phys., 154, 117–122.10.1016/j.sna.2009.07.016.
24. Yang, S. Y., Mahadeva, S. K., Kim, J., (2013). Remotely powered and controlled EAPap actuator by amplitude modulated microwaves. Smart Mater. Struct., 22, 017001.10.1088/0964-1726/22/1/017001.
25. Yun, G. Y., Kim, H. S., Kim, J., (2008a). Blocked force measurement of an electro-active paper actuator using a cantilevered force transducer. Smart Mater. Struct., 17, 025021.10.1088/0964-1726/17/2/025021.
26. Yun, G. Y., Kim, H. S., Kim, J., Kim, K., Yang, C., (2008b). Effect of aligned cellulose film to the performance of electro-active paper actuator. Sens. Actuat. A Phys., 141, 530–535.10.1016/j.sna.2007.10.014.
27. Yun, G. Y., Kim, J., Kim, J. H., Kim, S. Y., (2010). Fabrication and testing of cellulose EAPap actuators for haptic application. Sens. Actuat. A Phys., 164, 68–73.10.1016/j.sna.2010.09.005.
28. Yun, S., Jang, S., Yun, G. Y., Kim, J., (2009). Electrically aligned cellulose film for electro-active paper and its piezoelectricity. Smart Mater. Struct., 18, 117001.10.1088/0964-1726/18/11/117001.
29. Yun, S., Kim, J., (2007). A bending electro-active paper actuator made by mixing multi-walled carbon nanotubes and cellulose. Smart Mater. Struct., 16, 1471–1476.10.1088/0964-1726/16/4/062.
30. Yun, S., Kim, J., Song, C., (2007). Performance of Electro-active paper actuators with thickness variation. Sens. Actuat. A Phys., 133, 225–230.10.1016/j.sna.2006.03.007.
31. Yun, S. Y., Kim, J., Ounaies, Z., (2006). Single-walled carbon nanotube/polyaniline coated cellulose based electro-active paper (EAPap) as hybrid actuator. Smart Mater. Struct., 15, N61–N65.10.1088/0964-1726/15/3/N02.