MEMS IMU carouseling for ground vehicles

IEEE Transactions on Vehicular Technology

Volumn 64, Issue 6, 2015, Pages 2242-2251

  Collin, Jussi ^a  

^a TAMPERE UNIVERSITY OF TECHNOLOGY   (Finland)

Author keywords

Dead reckoning (DR); microelectromechanical system (MEMS) gyroscopes.

Indexed keywords

COSTS; ELECTROMECHANICAL DEVICES; GYROSCOPES; MEMS; MICROMECHANICS; NAVIGATION SYSTEMS; UNITS OF MEASUREMENT; VEHICLES;

DEAD RECKONING; INERTIAL MEASUREMENT UNIT; LOW-FREQUENCY NOISE; MICRO ELECTROMECHANICAL SYSTEM (MEMS); NAVIGATION SOLUTION; ORIENTATION ERROR; ORIENTATION SENSING; ROTATING PLATFORM;

GROUND VEHICLES;

EID: 84933074544     PISSN: 00189545     EISSN: None     Source Type: Journal    
DOI: 10.1109/TVT.2014.2345847     Document Type: Article

References (66)

1. T. E. Melgard, G. Lachapelle, and H. Gehue, "GPS signal availability in an urban area-receiver performance analysis," in Proc. IEEE Position Loc. Navigat. Symp., 1994, pp. 487-493
2. D. Aloi and O. Korniyenko, "Comparative performance analysis of a Kalman filter and a modified double exponential filter for GPS-only position estimation of automotive platforms in an urban-canyon environment," IEEE Trans. Veh. Technol., vol. 56, no. 5, pp. 2880-2892, Sep. 2007
3. O. Mezentsev, J. Collin, and G. Lachapelle, "Vehicular navigation in urban canyons using a high sensitivity GPS receiver augmented with a medium-grade IMU," in Proc. Saint Petersburg Int. Conf. Integr. Navigat. Syst., 2003, pp. 64-70
4. H. Liu, S. Nassar, and N. El-Sheimy, "Two-filter smoothing for accurate INS/GPS land-vehicle navigation in urban centers," IEEE Trans. Veh. Technol., vol. 59, no. 9, pp. 4256-4267, Nov. 2010
5. R. Schwarz, O. Nelles, P. Scheere, and R. Isermann, "Increasing signal accuracy of automotive wheel-speed sensors by on-line learning," in Proc. ACC, 1997, pp. 1131-1135
6. J. Parviainen, M. Kirkko-Jaakkola, P. Davidson, M. Lopez, and J. Collin, "Doppler radar and MEMS gyro augmented DGPS for large vehicle navigation," in Proc. ICL GNSS, 2011, pp. 140-145
7. D. Bevly and B. Parkinson, "Cascaded Kalman filters for accurate estimation of multiple biases, dead-reckoning navigation, and full state feedback control of ground vehicles," IEEE Trans. Control Syst. Technol., vol. 15, no. 2, pp. 199-208, Mar. 2007
8. M. Kirkko-Jaakkola, J. Collin, and J. Takala, "Bias prediction for MEMS gyroscopes," IEEE Sensors J., vol. 12, no. 6, pp. 2157-2163, Jun. 2012
9. J. Rios and E. White, "Fusion filter algorithm enhancements for a MEMS GPS/IMU," in Proc. ION ITM, San Diego, CA, USA, Jan. 28-30, 2002, pp. 126-137, The Institute of Navigation
10. M. El-Diasty, A. El-Rabbany, and S. Pagiatakis, "Temperature variation effects on stochastic characteristics for low-cost MEMS-based inertial sensor error," Meas. Sci. Technol., vol. 18, no. 11, pp. 3321-3328, Nov. 2007
11. J. Georgy, A. Noureldin, M. J. Korenberg, and M. M. Bayoumi, "Modeling the stochastic drift of a MEMS-based gyroscope in gyro/odometer/ GPS integrated navigation," IEEE Trans. Intell. Transp. Syst., vol. 11, no. 4, pp. 856-872, Dec. 2010
12. N. I. Krobka, "Differential methods of identifying gyro noise structure," Gyroscopy Navigat., vol. 2, no. 3, pp. 126-137, Jul. 2011
13. A. Noureldin, T. Karamat, M. Eberts, and A. El-Shafie, "Performance enhancement of MEMS-based INS/GPS integration for low-cost navigation applications," IEEE Trans. Veh. Technol., vol. 58, no. 3, pp. 1077-1096, Mar. 2009
14. E. S. Geller, "Inertial system platform rotation," IEEE Trans. Aerosp. Electron. Syst., vol. AES-4, no. 4, pp. 557-568, Jul. 1968
15. Y. Yang and L.-J. Miao, "Fiber-optic strapdown inertial system with sensing cluster continuous rotation," IEEE Trans. Aerosp. Electron. Syst., vol. 40, no. 4, pp. 1173-1178, Oct. 2004
16. Q. Nie, X. Gao, and Z. Liu, "Research on accuracy improvement of INS with continuous rotation," in Proc. ICIA, 2009, pp. 870-874
17. B. Renkoski, "The effect of carouseling on MEMS IMU performance for gyrocompassing applications," M.S. thesis, MIT, Cambridge, MA, USA, 2008
18. F. Sun and Q. Wang, "Researching on the compensation technology of rotating mechanism error in single-Axis rotation strapdown inertial navigation system," in Proc. ICMA, 2012, pp. 1767-1772
19. W. Sun, A.-G. Xu, L.-N. Che, and Y. Gao, "Accuracy improvement of SINS based on IMU rotational motion," IEEE Aerosp. Electron. Syst. Mag., vol. 27, no. 8, pp. 4-10, Aug. 2012
20. G. Retscher and T. Hecht, "Investigation of location capabilities of four different smartphones for LBS navigation applications," in Proc. Int. Conf. IPIN, 2012, pp. 1-6
21. R. Antonello and R. Oboe, "Exploring the potential of MEMS gyroscopes: Successfully using sensors in typical industrial motion control applications," IEEE Ind. Electron. Mag., vol. 6, no. 1, pp. 14-24, Mar. 2012
22. L. I. Iozan, M. Kirkko-Jaakkola, J. Collin, J. Takala, and C. Rusu, "Using a MEMS gyroscope to measure the Earth's rotation for gyrocompassing applications," Meas. Sci. Technol., vol. 23, no. 2, p. 025005, Feb. 2012. [Online]. Available: http://stacks.iop.org/0957-0233/23/i=2/a=025005
23. S. Kohler, "MEMS inertial sensors with integral rotation means," Sandia Nat. Lab., Albuquerque, NM, USA, Sandia Rep. SAND 2003-3388, 2003
24. B. Yuan, D. Liao, and S. Han, "Error compensation of an optical gyro INS by multi-Axis rotation," Meas. Sci. Technol., vol. 23, no. 2, p. 025102, Feb. 2012. [Online]. Available: http://stacks.iop.org/0957-0233/23/i=2/ a=025102
25. IEEE Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros, IEEE Std. 1431-2004, Dec. 2004, pp. 1-78
26. F. Zha, J. N. Xu, B. Q. Hu, and F. J. Qin, "Error analysis for SINS with different IMU rotation scheme," in Proc. 2nd Int. Asia Conf. Informat. CAR, Mar. 2010, vol. 1, pp. 422-425
27. J. Cheng, D. Guan, and X. Cheng, "Design of simulation and verification system for rotation strapdown inertial navigation system," in Proc. ICMA, Aug. 2012, pp. 865-869
28. C. Johnson, "Adaptive corrective alignment for a carouseling strapdown INS," in Proc. Amer. Control Conf., Jun. 1984, pp. 1856-1861
29. F. Sun, W. Sun, and L. Wu, "Coarse alignment based on IMU rotational motion for surface ship," in Proc. IEEE/ION PLANS, May 2010, pp. 151-156
30. I. Prikhodko, S. Zotov, A. Trusov, and A. Shkel, "What is MEMS gyrocompassing? Comparative analysis of maytagging and carouseling," J. Microelectromech. Syst., vol. 22, no. 6, pp. 1257-1266, Dec. 2013
31. W. Watson, "Vibrating element angular rate sensor system and north seeking gyroscope embodiment thereof," U.S. Patent 5 272 922, Mar. 6, 1993. [Online]. Available: https://www.google.com/patents/US5272922
32. R. Andreas, G. Heck, S. Kohler, and A. Watts, "Wellbore inertial directional surveying system," U.S. Patent 4 987 684, Jan. 29, 1982. [Online]. Available: https://www.google.com/patents/US4987684
33. S. Van, "High speed well surveying," CA Patent 1 188 216, Jun. 4, 1982. [Online]. Available: https://www.google.com/patents/CA1188216A1? cl=en
34. P. E. Wellstead and N. B. O. L. Pettit, "Analysis and redesign of an antilock brake system controller," Proc. Inst. Elect. Eng.-Control Theory Appl., vol. 144, no. 5, pp. 413-426, Sep. 1997
35. W. Hernandez, "Improving the response of a wheel speed sensor by using frequency-domain adaptive filtering," IEEE Sensors J., vol. 3, no. 4, pp. 404-413, Aug. 2003
36. P. Savage, Strapdown Inertial Navigation Lecture Notes, 6th ed. Maple Plain, MN, USA: Strapdown Associates, Inc., 1997
37. F. Gustafsson, "Particle filter theory and practice with positioning applications," IEEE Aerosp. Electron. Syst. Mag., vol. 25, no. 7, pp. 53-82, Jul. 2010
38. J. Bortz, "A new mathematical formulation for strapdown inertial navigation," IEEE Trans. Aerosp. Electron. Syst., vol. AES-7, no. 1, pp. 61-66, Jan. 1971
39. P. Savage, "Strapdown inertial navigation integration algorithm design," J. Guid. Control Dyn., vol. 21, no. 1/2, pp. 19-28, Jan. 1998
40. J. J. Kappl, "Nonlinear estimation via Kalman filtering," IEEE Trans. Aerosp. Electron. Syst., vol. AES-7, no. 1, pp. 79-84, Jan. 1971
41. B. Friedland, "Optimum steady-state position and velocity estimation using noisy sampled position data," IEEE Trans. Aerosp. Electron. Syst., vol. AES-9, no. 6, pp. 906-911, Nov. 1973
42. J. Collin, "Vehicle positioning," PCT Patent FI2013/050 357, Apr. 2, 2013. [Online]. Available: http://patentscope.wipo.int/search/en/ WO2013150183
43. A. D. W, "Statistics of atomic frequency standards," Proc. IEEE, vol. 54, no. 2, pp. 221-230, Feb. 1966
44. IEEE Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology-Random Instabilities, IEEE Std. 1139-2008 (Revision of IEEE Std 1139-1999), 2009, pp. 1-50
45. D. Howe and D. Percival, "Wavelet variance, Allan variance, and leakage," IEEE Trans. Instrum. Meas., vol. 44, no. 2, pp. 94-97, Apr. 1995
46. J. Collin, M. Kirkko-Jaakkola, and J. Takala, "Effect of carouseling on angular rate sensor error processes," IEEE Trans. Instrum. Meas. doi:10.1109/TIM.2014.2335921, to be published. [Online]. Available: http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6861982 &isnumber=4407674
47. L3GD20 MEMS Digital Output Gyroscope, STMicroelectronics, Geneva, Switzerland, 2013
48. Dl-4Plus GPS Receiver, Novatel, San Diego, CA, USA, 2013
49. L1/l2 GPS Antenna Model 600, Novatel, Calgary, AB, Canada, 2013
50. LSM303DLHC 3D Accelerometer and 3D Magnetometer, STMicroelectronics, Geneva, Switzerland, 2013
51. Grafnav GNSS Post-Processing Software, Novatel, Calgary, AB, Canada, 2013
52. MATLAB Version 7.13.0.564 (r2011b), MathWorks, Natick, MA, USA, 2011
53. M. Bevly and S. Cobb, GNSS for Vehicle Control. Norwood, MA, MA: Artech House, 2010
54. F. Gustafsson et al., "Particle filters for positioning, navigation, and tracking," IEEE Trans. Signal Process., vol. 50, no. 2, pp. 425-437, Feb. 2002
55. P. Davidson, J. Collin, J. Raquet, and J. Takala, "Application of particle filters for vehicle positioning using road maps," in Proc. ION GNSS, 2010, pp. 1653-1661, The Institute of Navigation
56. Y. Leng, Q. Li, B. Hou, S. Liu, and T. Dong, "Wheel antenna of wireless sensors in automotive tire pressure monitoring system," in Proc. Int. Conf. WiCom, Netw. Mobile Comput., 2007, pp. 2755-2758
57. J. Paradiso and T. Starner, "Energy scavenging for mobile and wireless electronics," IEEE Pervasive Comput., vol. 4, no. 1, pp. 18-27, Jan.-Mar. 2005
58. S. Chalasani and J. Conrad, "A survey of energy harvesting sources for embedded systems," in Proc. IEEE Southeastcon, 2008, pp. 442-447
59. G. Manla, N. White, and J. Tudor, "Harvesting energy from vehicle wheels," in Proc. Int. Transducers Solid-State Sensors, Actuators Microsyst. Conf., 2009, pp. 1389-1392
60. Y.-J. Wang, C.-D. Chen, and C.-K. Sung, "System design of a weightedpendulum-Type electromagnetic generator for harvesting energy from a rotating wheel," IEEE/ASME Trans.Mechatronics, vol. 18, no. 2, pp. 754-763, Apr. 2013
61. D. Parthasarathy, "Energy harvesting wheel speed sensor," M.S. thesis, Chalmers Univ. Technol., Goteborg, Sweden, 2012
62. F. Deicke, H. Graetz, and W.-J. Fischer, "Analysis of antennas for sensor tags embedded in tyres," in Proc. 5th Eur. Workshop RFID SysTech, Jun. 2009, pp. 1-6
63. Y. Leng et al., "Study on electromagnetic wave propagation characteristics in rotating environments and its application in tire pressure monitoring," IEEE Trans. Instrum. Meas., vol. 61, no. 6, pp. 1765-1777, Jun. 2012
64. H. Zeng and T. Hubing, "The effect of the vehicle body on EM propagation in tire pressure monitoring systems," IEEE Trans. Antennas Propag., vol. 60, no. 8, pp. 3941-3949, Aug. 2012
65. M. Buehler, R. Anderson, S. Seshadri, and M. G. Schaap, "Prospecting for in situ resources on the Moon and Mars using wheel-based sensors," in Proc. IEEE Aerosp. Conf., 2005, pp. 607-616
66. D. Bevly, J. Ryu, and J. Gerdes, "Integrating INS sensors with GPS measurements for continuous estimation of vehicle sideslip, roll, and tire cornering stiffness," IEEE Trans. Intell. Transp. Syst., vol. 7, no. 4, pp. 483-493, Dec. 2006