Mechanical response of hollow metallic nanolattices: Combining structural and material size effects

Journal of Applied Mechanics, Transactions ASME

Volumn 82, Issue 7, 2015, Pages

  Montemayor, L C ^a   Greer, J R ^a  

^a California Institute of Technology   (United States)

Author keywords

cellular solids; hierarchical materials; metamaterials; size effect

Indexed keywords

BIOMECHANICS; COMPRESSIVE STRENGTH; DEGREES OF FREEDOM (MECHANICS); DENSITY (SPECIFIC GRAVITY); GEOMETRY; GOLD; GRAIN SIZE AND SHAPE; MECHANICAL PROPERTIES; METAMATERIALS; MOBILE SECURITY; SIZE DETERMINATION; STIFFNESS; STOCHASTIC SYSTEMS; TUBES (COMPONENTS); YIELD STRESS;

CELLULAR SOLIDS; COMPRESSIVE RESPONSE; CONSTITUENT MATERIALS; HIERARCHICAL MATERIALS; MICRO-STRUCTURAL EFFECTS; SIZE EFFECTS; STRENGTH AND STIFFNESS; UNIAXIAL COMPRESSION EXPERIMENT;

STRUCTURAL PROPERTIES;

EID: 84930960411     PISSN: 00218936     EISSN: 15289036     Source Type: Journal    
DOI: 10.1115/1.4030361     Document Type: Article

References (55)

1. Fleck, N. A., Deshpande, V. S., and Ashby, M. F., 2010, "Micro-Architectured Materials: Past, Present and Future," Proc. R. Soc. A, 466(2121), pp. 2495-2516.
2. Gibson, L. J., and Ashby, M. F., 1999, Cellular Solids: Structure and Properties, Cambridge University Press, Cambridge, UK.
3. Wallach, J. C., and Gibson, L. J., 2001, "Mechanical Behavior of a Three-Dimensional Truss Material," Int. J. Solids Struct., 38(40-41), pp. 7181-7196.
4. Deshpande, V., and Fleck, N., 2001, "Collapse of Truss Core Sandwich Beams in 3-Point Bending," Int. J. Solids Struct., 38(36-37), pp. 6275-6305.
5. Deshpande, V. S., Fleck, N. A., and Ashby, M. F., 2001, "Effective Properties of the Octet-Truss Lattice Material," J. Mech. Phys. Solids, 49(8), pp. 1747-1769.
6. Zheng, X., Lee, H., Weisgraber, T. H., Shusteff, M., DeOtte, J., Duoss, E. B., Kuntz, J. D., Biener, M. M., Ge, Q., Jackson, J. A., Kucheyev, S. O., Fang, N. X., and Spadaccini, C. M., 2014, "Ultralight, Ultrastiff Mechanical Metamaterials," Science, 344(6190), pp. 1373-1377.
7. Meza, L. R., Das, S., and Greer, J. R., 2014, "Strong, Lightweight, and Recoverable Three-Dimensional Ceramic Nanolattices," Science, 345(6202), pp. 1322-1326.
8. Jang, D., Meza, L., Greer, F., and Greer, J., 2013, "Fabrication and Deformation of Three-Dimensional Hollow Ceramic Nanostructures," Nat. Mater., 12, pp. 893-898.
9. Valdevit, L., Godfrey, S. W., Schaedler, T. A., Jacobsen, A. J., and Carter, W. B., 2013, "Compressive Strength of Hollow Microlattices: Experimental Characterization, Modeling, and Optimal Design," J. Mater. Res., 28(17), pp. 2461-2473.
10. Torrents, A., Schaedler, T. A., Jacobsen, A. J., Carter, W. B., and Valdevit, L., 2012, "Characterization of Nickel-Based Microlattice Materials With Structural Hierarchy From the Nanometer to the Millimeter Scale," Acta Mater., 60(8), pp. 3511-3523.
11. Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., and Carter, W. B., 2011, "Ultralight Metallic Microlattices," Science, 334(6058), pp. 962-965.
12. Ng, K. Y., Lin, Y., and Ngan, A. H. W., 2009, "Deformation of Anodic Aluminum Oxide Nano-Honeycombs During Nanoindentation," Acta Mater., 57(9), pp. 2710-2720.
13. Wang, J., Evans, A. G., Dharmasena, K., and Wadley, H. N. G., 2003, "On the Performance of Truss Panels With Kagome Cores," Int. J. Solids Struct., 40(25), pp. 6981-6988.
14. Wadley, H. N. G., Fleck, N., and Evans, A. G., 2003, "Fabrication and Structural Performance of Periodic Cellular Metal Sandwich Structures," Compos. Sci. Technol., 63(16), pp. 2331-2343.
15. Chiras, S., Mumm, D. R., Evans, A. G.,Wicks, N., Hutchinson, J.W., Dharmasena, K., Wadley, H. N. G., and Fichter, S., 2002, "The Structural Performance of Near-Optimized Truss Core Panels," Int. J. Solids Struct., 39(15), pp. 4093-4115.
16. Hodge, A. M., Biener, J., Hayes, J. R., Bythrow, P. M., Volkert, C. A., and Hamza, A. V., 2007, "Scaling Equation for Yield Strength of Nanoporous Open-Cell Foams," Acta Mater., 55(4), pp. 1343-1349.
17. Hutchinson, R. G., and Fleck, N. A., 2006, "The Structural Performance of the Periodic Truss," J. Mech. Phys. Solids, 54(4), pp. 756-782.
18. Deshpande, V. S., Ashby, M. F., and Fleck, N. A., 2001, "Foam Topology: Bending Versus Stretching Dominated Architectures," Acta Mater., 49(6), pp. 1035-1040.
19. Jennings, A. T., Burek, M. J., and Greer, J. R., 2010, "Microstructure Versus Size: Mechanical Properties of Electroplated Single Crystalline Cu Nanopillars," Phys. Rev. Lett., 104(13), p. 135503.
20. Greer, J. R., and De Hosson, J. T. M., 2011, "Plasticity in Small-Sized Metallic Systems: Intrinsic Versus Extrinsic Size Effect," Prog. Mater. Sci., 56(6), pp. 654-724.
21. Greer, J. R., and Nix, W. D., 2005, "Size Dependence of Mechanical Properties of Gold at the Sub-Micron Scale," Appl. Phys. A, 80(8), pp. 1625-1629.
22. Greer, J. R., Oliver, W. C., and Nix, W. D., 2005, "Size Dependence of Mechanical Properties of Gold at the Micron Scale in the Absence of Strain Gradients," Acta Mater., 53(6), pp. 1821-1830.
23. Dou, R., and Derby, B., 2009, "A Universal Scaling Law for the Strength of Metal Micropillars and Nanowires," Scr. Mater., 61(5), pp. 524-527.
24. Greer, J. R., Jang, D., and Gu, X. W., 2012, "Exploring Deformation Mechanisms in Nanostructured Materials," JOM, 64(10), pp. 1241-1252.
25. Jang, D., and Greer, J. R., 2011, "Size-Induced Weakening and Grain Boundary-Assisted Deformation in 60 nm Grained Ni Nanopillars," Scr. Mater., 64(1), pp. 77-80.
26. Gu, X. W., Loynachan, C. N., Wu, Z., Zhang, Y.-W., Srolovitz, D. J., and Greer, J. R., 2012, "Size-Dependent Deformation of Nanocrystalline Pt Nanopillars," Nano Lett., 12(12), pp. 6385-6392.
27. Yang, B., Motz, C., Rester, M., and Dehm, G., 2012, "Yield Stress Influenced by the Ratio of Wire Diameter to Grain Size-A Competition Between the Effects of Specimen Microstructure and Dimension in Micro-Sized Polycrystalline Copper Wires," Philos. Mag., 92(25-27), pp. 3243-3256.
28. Rys, J., Valdevit, L., Schaedler, T. A., Jacobsen, A. J., Carter, W. B., and Greer, J. R., 2014, "Fabrication and Deformation of Metallic Glass Micro-Lattices," Adv. Eng. Mater., 16(7), pp. 889-896.
29. Chen, D. Z., Jang, D., Guan, K. M., An, Q., Goddard, W. A., and Greer, J. R., 2013, "Nanometallic Glasses: Size Reduction Brings Ductility, Surface State Drives Its Extent," Nano Lett., 13(9), pp. 4462-4468.
30. Chen, C. Q., Pei, Y. T., and De Hosson, J. T. M., 2010, "Effects of Size on the Mechanical Response of Metallic Glasses Investigated Through In Situ TEM Bending and Compression Experiments," Acta Mater., 58(1), pp. 189-200.
31. Volkert, C. A., Donohue, A., and Spaepen, F., 2008, "Effect of Sample Size on Deformation in Amorphous Metals," J. Appl. Phys., 103(8), p. 083539.
32. Valdevit, L., Jacobsen, A. J., Greer, J. R., and Carter, W. B., 2011, "Protocols for the Optimal Design of Multi-Functional Cellular Structures: From Hypersonics to Micro-Architected Materials," J. Am. Ceram. Soc., 94(S1), pp. s15-s34.
33. Lian, J., Jang, D., Valdevit, L., Schaedler, T. A., Jacobsen, A. J., Carter, W. B., and Greer, J. R., 2011, "Catastrophic Versus Gradual Collapse of Thin-Walled Nanocrystalline Ni," Nano Lett., 11(10), pp. 4118-4125.
34. Maloney, K. J., Roper, C. S., Jacobsen, A. J., Carter, W. B., Valdevit, L., and Schaedler, T. A., 2013, "Microlattices as Architected Thin Films: Analysis of Mechanical Properties and High Strain Elastic Recovery," APL Mater., 1(2), p. 022106.
35. Jacobsen, A. J., Barvosa-Carter, W., and Nutt, S., 2007, "Micro-Scale Truss Structures Formed From Self-Propagating Photopolymer Waveguides," Adv. Mater., 19(22), pp. 3892-3896.
36. Jacobsen, A. J., Barvosa-Carter, W., and Nutt, S., 2008, "Micro-Scale Truss Structures With Three-Fold and Six-Fold Symmetry Formed From Self-Propagating Polymer Waveguides," Acta Mater., 56(11), pp. 2540-2548.
37. Meza, L. R., and Greer, J. R., 2014, "Mechanical Characterization of Hollow Ceramic Nanolattices," J. Mater. Sci., 49(6), pp. 2496-2508.
38. Dietiker, M., Buzzi, S., Pigozzi, G., Löffler, J. F., and Spolenak, R., 2011, "Deformation Behavior of Gold Nano-Pillars Prepared by Nanoimprinting and Focused Ion-Beam Milling," Acta Mater., 59(5), pp. 2180-2192.
39. Volkert, C. A., and Lilleodden, E. T., 2006, "Size Effects in the Deformation of Sub-Micron Au Columns," Philos. Mag., 86(33-35), pp. 5567-5579.
40. Oh, S. H., Legros, M., Kiener, D., and Dehm, G., 2009, "In Situ Observation of Dislocation Nucleation and Escape in a Submicrometre Aluminium Single Crystal," Nat. Mater., 8(2), pp. 95-100.
41. Gu, X. W., and Greer, J. R., 2015, "Ultra-Strong Architected Cu Meso-Lattices," Extreme Mech. Lett., 2, pp. 7-14.
42. Fischer, J., and Wegener, M., 2013, "Three-Dimensional Optical Laser Lithography Beyond the Diffraction Limit," Laser Photonics Rev., 7(1), pp. 22-44.
43. Sun, H., and Kawata, S., 2004, "Two-Photon Photopolymerization and 3D Lithographic Microfabrication," NMR, 3D Analysis, Photopolymerization (Advances in Polymer Science, Vol. 170), Springer-Verlag, Berlin, pp. 169-274.
44. Xiong, W., Zhou, Y. S., He, X. N., Gao, Y., Mahjouri-Samani, M., Jiang, L., Baldacchini, T., and Lu, Y. F., 2012, "Simultaneous Additive and Subtractive Three-Dimensional Nanofabrication Using Integrated Two-Photon Polymerization and Multiphoton Ablation," Light: Sci. Appl., 1(4), p. e6.
45. LaFratta, C. N., Fourkas, J. T., Baldacchini, T., and Farrer, R. A., 2007, "Multiphoton Fabrication," Angew. Chem., Int. Ed. Engl., 46(33), pp. 6238-6258.
46. Jeon, S., Malyarchuk, V., Rogers, J. A., and Wiederrecht, G. P., 2006, "Fabricating Three-Dimensional Nanostructures Using Two Photon Lithography in a Single Exposure Step," Opt. Express, 14(6), pp. 2300-2308.
47. Sun, H.-B., Matsuo, S., and Misawa, H., 1999, "Three-Dimensional Photonic Crystal Structures Achieved With Two-Photon-Absorption Photopolymerization of Resin," Appl. Phys. Lett., 74(6), pp. 786-788.
48. Tetreault, N., von Freymann, G., Deubel, M., Hermatschweiler, M., Perez-Willard, F., John, S., Wegener, M., and Ozin, G. A., 2006, "New Route to Three-Dimensional Photonic Bandgap Materials: Silicon Double Inversion of Polymer Templates," Adv. Mater., 18(4), pp. 457-460.
49. Montemayor, L. C., Meza, L. R., and Greer, J. R., 2014, "Design and Fabrication of Hollow Rigid Nanolattices Via Two-Photon Lithography," Adv. Eng. Mater., 16(2), pp. 184-189.
50. Thornton, J. A., 1975, "Influence of Substrate Temperature and Deposition Rate on Structure of Thick Sputtered Cu Coatings," J. Vac. Sci. Technol., 12(4), pp. 830-835.
51. Thornton, J. A., 1986, "The Microstructure of Sputter-Deposited Coatings," J. Vac. Sci. Technol., A, 4(6), pp. 3059-3065.
52. Thornton, J. A., 1974, "Influence of Apparatus Geometry and Deposition Conditions on the Structure and Topography of Thick Sputtered Coatings," J. Vac. Sci. Technol., 11(4), pp. 666-670.
53. Valdevit, L., Dec. 2013, private communication.
54. Oliver, W., and Pharr, G., 1992, "An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments," J. Mater. Res., 7(6), pp. 1564-1583.
55. Thompson, C. V., 2000, "Structure Evolution During Processing of Polycrystalline Films," Annu. Rev. Mater. Sci., 30, pp. 159-190.