Mechanical and biological properties of the micro-/nano-grain functionally graded hydroxyapatite bioceramics for bone tissue engineering

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 48, Issue , 2015, Pages 1-11

  Zhou, Changchun ^a   Deng, Congying ^a   Chen, Xuening ^a   Zhao, Xiufen ^a   Chen, Ying ^a   Fan, Yujiang ^a   Zhang, Xingdong ^a  

^a SICHUAN UNIVERSITY   (China)

Author keywords

Biological property; Bone tissue engineering; Functionally graded materials; Mechanical property; Two step sintering

Indexed keywords

BIOCERAMICS; BIOLOGICAL MATERIALS; BIOMECHANICS; BONE; CELL CULTURE; CERAMIC MATERIALS; DYNAMIC MECHANICAL ANALYSIS; HYDROXYAPATITE; MECHANICAL PROPERTIES; REPAIR; SINTERING; STEM CELLS; TISSUE; TISSUE ENGINEERING;

BIOLOGICAL PROPERTIES; BONE MARROW MESENCHYMAL STEM CELLS; BONE TISSUE ENGINEERING; DYNAMIC MECHANICAL ANALYSIS (DMA); FLUORESCENT MICROSCOPY; FUNCTIONALLY GRADED MATERIAL (FGM); HYDROXYAPATITE BIOCERAMICS; TWO-STEP SINTERING;

FUNCTIONALLY GRADED MATERIALS;

BIOCERAMICS; HYDROXYAPATITE; BIOMATERIAL;

ANIMAL CELL; ARTICLE; BIOCOMPATIBILITY; BONE MARROW DERIVED MESENCHYMAL STEM CELL; BONE REMODELING; BONE TISSUE; CELL CULTURE; CELL PROLIFERATION; CELL VIABILITY; COLORIMETRY; DIFFERENTIAL SCANNING CALORIMETRY; MICROTECHNOLOGY; MTT ASSAY; NANOFABRICATION; NONHUMAN; PRIORITY JOURNAL; TISSUE ENGINEERING; TISSUE REPAIR; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION; ANIMAL; BONE; CERAMICS; CHEMISTRY; CYTOLOGY; MATERIALS TESTING; MESENCHYMAL STROMA CELL; PROCEDURES; RABBIT;

ANIMALS; BIOCOMPATIBLE MATERIALS; BONE AND BONES; CELL PROLIFERATION; CERAMICS; DURAPATITE; MATERIALS TESTING; MESENCHYMAL STROMAL CELLS; RABBITS; TISSUE ENGINEERING;

EID: 84928156416     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2015.04.002     Document Type: Article

References (60)

1. Akbarzadeh R., Minton J., Janney C., Smith T., James P., Yousefi A.M. Hierarchical polymeric scaffolds support the growth of MC3T3-E1 cells. J. Mater. Sci.: Mater. Med. 2015, 26:1-12.
2. Albayrak O., El-Atwani O., Altintas S. Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition. Surf. Coat. Technol. 2008, 202:2482-2487.
3. Altomare L., Bellucci D., Bolelli G., Bonferroni B., Cannillo V., De Nardo L., Gadow R., Killinger A., Lusvarghi L., Sola A., Stiegler N. Microstructure and in vitro behavior of 45S5 bioglass coatings deposited by high velocity suspension flame spraying (HVSFS). J. Mater. Sci. Mater. Med. 2011, 22:1303-1319.
4. Balasundaram G., Sato M., Webster T.J. Using hydroxyapatite nanoparticles and decreased crystallinity to promote osteoblast adhesion similar to functionalizing with RGD. Biomaterials 2006, 27:2798-2805.
5. Biggs M.J., Richards R.G., Gadegaard N., McMurray R.J., Affrossman S., Wilkinson C.D., Oreffo R.O., Dalby M.J. Interactions with nanoscale topography: adhesion quantification and signal transduction in cells of osteogenic and multipotent lineage. J. Biomed. Mater. Res.. Part A 2009, 91:195-208.
6. Bolelli G., Bellucci D., Cannillo V., Lusvarghi L., Sola A., Stiegler N., Müller P., Killinger A., Gadowb R., Altomare L., De Nardo L. Suspension thermal spraying of hydroxyapatite: microstructure and in vitro behaviour. Mater. Sci. Eng. C 2014, 34:287-303.
7. Bolelli G., Cannillo V., Gadow R., Killinger A., Lusvarghi L., Rauch J. Microstructural and in vitro characterisation of high-velocity suspension flame sprayed (HVSFS) bioactive glass coatings. J. Eur. Ceram. Soc. 2009, 29:2249-2257.
8. Campo R.D., Savoini B., Munoz A., Monge M.A., Garces G. Mechanical properties and corrosion behavior of Mg-HAP composites. J. Mech. Behav. Biomed. Mater. 2014, 39C:238-246.
9. Cannillo V., Lusvarghi L., Manfredini T., Montorsi M., Siligardi C., Sola A. Glass-ceramic functionally graded materials produced with different methods. J. Eur. Ceram. Soc. 2007, 27:1293-1298.
10. Cattini A., Bellucci D., Sola A., Pawłowski L., Cannillo V. Suspension plasma spraying of optimised functionally graded coatings of bioactive glass/hydroxyapatite. Surf. Coat. Technol. 2013, 236:118-126.
11. Chen I.W., Wang X.H. Sintering dense nanocrystalline ceramics without final-stage grain growth. Nature 2000, 404:168-171.
12. Chen L., Tang C.Y., Tsui C.P., Chen D.Z. Mechanical properties and in vitro evaluation of bioactivity and degradation of dexamethasone-releasing poly-d-L-lactide/nano-hydroxyapatite composite scaffolds. J. Mech. Behav. Biomed. Mater. 2013, 22:41-50.
13. Chen Y., Gan C.H., Zhang T.N., Yu G., Bai P.C., Kaplan A. Laser-surface-alloyed carbon nanotubes reinforced hydroxyapatite composite coatings. Appl. Phys. Lett. 2005, 86:251905-251930.
14. Choi S.W., Zhang Y., Thomopoulos S., Xia Y. In vitro mineralization by preosteoblasts in poly(DL-lactide-co-glycolide) inverse opal scaffolds reinforced with hydroxyapatite nanoparticles. Langmuir: ACS J. Surf. Colloids 2010, 26:12126-12131.
15. Cui C., Sun J. Optimizing the design of bio-inspired functionally graded material (FGM) layer in all-ceramic dental restorations. Dent. Mater. J. 2014, 33:173-178.
16. de Peppo G.M., Agheli H., Karlsson C., Ekstrom K., Brisby H., Lenneras M., Gustafsson S., Sjovall P., Johansson A., Olsson E., Lausmaa J., Thomsen P., Petronis S. Osteogenic response of human mesenchymal stem cells to well-defined nanoscale topography in vitro. Int. J. Nanomed. 2014, 9:2499-2515.
17. Devis B., Antonella S., Alexandre A., Roberta S., Luigi C., Valeria C. Bioactive glass/hydroxyapatite composites: mechanical properties and biological evaluation. Mater. Sci. Eng. C 2015, 51:196-205.
18. Dorozhkin S.V. Nanosized and nanocrystalline calcium orthophosphates. Acta Biomater. 2010, 6:715-734.
19. Gasik M., Keski-Honkola A., Bilotsky Y., Friman M. Development and optimisation of hydroxyapatite-ss-TCP functionally gradated biomaterial. J. Mech. Behav. Biomed. Mater. 2014, 30:266-273.
20. Ghomi H., Fathi M.H., Edris H. Effect of the composition of hydroxyapatite/bioactive glass nanocomposite foams on their bioactivity and mechanical properties. Mater. Res. Bull. 2012, 47:3523-3532.
21. Goenka S., Balu R., Sampath Kumar T.S. Effects of nanocrystalline calcium deficient hydroxyapatite incorporation in glass ionomer cements. J. Mech. Behav. Biomed. Mater. 2012, 7:69-76.
22. Guo W.G., Qiu Z.Y., Cui H., Wang C.M., Zhang X.J., Lee I.S., Dong Y.Q., Cui F.Z. Strength and fatigue properties of three-step sintered dense nanocrystal hydroxyapatite bioceramics. Front. Mater. Sci. 2013, 7:190-195.
23. Gyorgy E., Grigorescu S., Socol G., Mihailescu I.N., Janackovic D., Dindune A., Kanepe Z., Palcevskis E., Zdrentu E.L., Petrescu S.M. Bioactive glass and hydroxyapatite thin films obtained by pulsed laser deposition. Appl. Surf. Sci. 2007, 253:7981-7986.
24. Hautamaki M.P., Puska M., Aho A.J., Kopperud H.M., Vallittu P.K. Surface modification of fiber reinforced polymer composites and their attachment to bone simulating material. J. Mater. Sci.: Mater. Med. 2013, 24:1145-1150.
25. Hieda J., Niinomi M., Nakai M., Cho K., Gozawa T., Katsui H., Tu R., Goto T. Enhancement of adhesive strength of hydroxyapatite films on Ti-29Nb-13Ta-4.6Zr by surface morphology control. J. Mech. Behav. Biomed. Mater. 2013, 18:232-239.
26. Kalbacova M., Rezek B., Baresova V., Wolf-Brandstetter C., Kromka A. Nanoscale topography of nanocrystalline diamonds promotes differentiation of osteoblasts. Acta Biomater. 2009, 5:3076-3085.
27. Kandori K., Kuroda T., Togashi S., Katayama E. Preparation of calcium hydroxyapatite nanoparticles using microreactor and their characteristics of protein adsorption. J. Phys. Chem. B 2011, 115:653-659.
28. Kim D.W., Cho I.S., Kim J.Y., Jang H.L., Han G.S., Ryu H.S., Shin H., Jung H.S., Kim H., Hong K.S. Simple large-scale synthesis of hydroxyapatite nanoparticles: in situ observation of crystallization process. Langmuir: ACS J. Surf. Colloids 2010, 26:384-388.
29. Kraaij G., Zadpoor A.A., Tuijthof G.J., Dankelman J., Nelissen R.G., Valstar E.R. Mechanical properties of human bone-implant interface tissue in aseptically loose hip implants. J. Mech. Behav. Biomed. Mater. 2014, 38:59-68.
30. Kumar R.R., Maruno S. Functionally graded coatings of HA-G-Ti composites and their in vivo studies. Mater. Sci. Eng. A-Struct. 2002, 334:156-162.
31. Lavine M., Frisk M., Pennisi E. Biomaterials introduction. Science 2012, 338:899.
32. Liao X.L., Xu W.F., Wang Y.L., Jia B., Zhou G.Y. Effect of porous structure on mechanical properties of C/PLA/nano-HA composites scaffold. Trans. Nonferr. Metals Soc. China 2009, 19:S748-S751.
33. Lin K.L., Chen L., Chang J. Fabrication of dense hydroxyapatite nanobioceramics with enhanced mechanical properties via two-step sintering process. Int. J. Appl. Ceram. Technol. 2012, 9:479-485.
34. Martin B., Wondraczek L., Deubener J., Yue Y.Z. Mechanically induced excess enthalpy in inorganic glasses. Appl. Phys. Lett. 2005, 86:121917-121924.
35. Maruno S., Imamura K., Hanaichi T., Ban S., Iwata H., Itoh H. Characterization and stability of bioactive HA-G-Ti composite materials and bonding to bone. Bioceramics 1994, 7:249-254.
36. Maruno S., Itoh H., Ban S., Iwata H., Ishikawa T. Micro-observation and characterization of bonding between bone and Ha-glass-titanium functionally gradient composite. Biomaterials 1991, 12:225-230.
37. Mehdikhani N.M., Fathi M.H., Mortazavi V., Mousavi S.B., Hashemi-Beni B., Razavi S.M. Novel nanocomposite coating for dental implant applications in vitro and in vivo evaluation. J. Mater. Sci. Mater. Med. 2012, 23:485-495.
38. Mehrali M., Shirazi F.S., Mehrali M., Metselaar H.S., Kadri N.A., Osman N.A. Dental implants from functionally graded materials. J. Biomed. Mater. Res. Part A 2013, 101:3046-3057.
39. Mulargia S., Dooley C., Cristofolini L., Taylor D. Fracture and fatigue in osteocytes. J. Mech. Behav. Biomed. Mater. 2014, 39C:231-237.
40. Park J., Lu W. Self-assembly of functionally gradient nanoparticle structures. Appl. Phys. Lett. 2008, 93:243109-243114.
41. Pompe W., Worch H., Epple M., Friess W., Gelinsky M., Greil P., Hempel U., Scharnweber D., Schulte K. Functionally graded materials for biomedical applications. Mater. Sci. Eng. A-Struct. 2003, 362:40-60.
42. Qu S.X., Guo X., Weng J., Cheng J.C., Feng B., Yeung H.Y., Zhang X.D. Evaluation of the expression of collagen type I in porous calcium phosphate ceramics implanted in an extra-osseous site. Biomaterials 2004, 25:659-667.
43. Rabiei A., Thomas B., Jin C., Narayan R., Cuomo J., Yang Y., Ong J.L. A study on functionally graded HA coatings processed using ion beam assisted deposition with in situ heat treatment. Surf. Coat. Technol. 2006, 200:6111-6116.
44. Rakngarm Nimkerdphol A., Otsuka Y., Mutoh Y. Effect of dissolution/precipitation on the residual stress redistribution of plasma-sprayed hydroxyapatite coating on titanium substrate in simulated body fluid (SBF). J. Mech. Behav. Biomed. Mater. 2014, 36:98-108.
45. Rodriguez R., Loske A.M., Fernandez F., Estevez M., Vargas S., Fernandez G., Paredes M.I. In vivo evaluation of implant-host tissue interaction using morphology-controlled hydroxyapatite-based biomaterials. J. Biomater. Sci. Polym. Ed. 2011, 22:1799-1810.
46. Schagemann J.C., Kurz H., Casper M.E., Stone J.S., Dadsetan M., Sun Y.L., Mrosek E.H., Fitzsimmons J.S., O'Driscoll S.W., Reinholz G. The effect of scaffold composition on the early structural characteristics of chondrocytes and expression of adhesion molecules. Biomaterials 2010, 31:2798-2805.
47. Shim J.H., Kim J.Y., Park M., Park J., Cho D.W. Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology. Biofabrication 2011, 3:34102-34111.
48. Stiegler N., Bellucci D., Bolelli G., Cannillo V., Gadow R., Killinger A., Lusvarghi L., Sola A. High-velocity suspension flame sprayed (HVSFS) hydroxyapatite coatings for biomedical applications. J. Therm. Spray Technol. 2012, 21:275-287.
49. Wang C.X., Tong J. Interfacial strength of novel PMMA/HA/nanoclay bone cement. Bio-Med. Mater. Eng. 2008, 18:367-375.
50. Wang J., Shaw L.L. Morphology-enhanced low-temperature sintering of nanocrystalline hydroxyapatite. Adv. Mater. 2007, 19:2364-2369.
51. Wang X.H., Chen P.L., Chen I.W. Two-step sintering of ceramics with constant grain-size Y2O3. J. Am. Ceram. Soc. 2006, 89:431-437.
52. Watari F., Yokoyama A., Omori M., Hirai T., Kondo H., Uo M., Kawasaki T. Biocompatibility of materials and development to functionally graded implant for bio-medical application. Compos. Sci. Technol. 2004, 64:893-908.
53. Watari F., Yokoyama A., Saso F., Uo M., Kawasaki T. Fabrication and properties of functionally graded dental implant. Compos. B-Eng. 1997, 28:5-11.
54. Zhang S., Zeng X.T., Wang Y.S., Cheng K., Weng W.J. Adhesion strength of sol-gel derived fluoridated hydroxyapatite coatings. Surf. Coat. Technol. 2006, 200:6350-6354.
55. Zhang Y., Sun M.J., Zhang D. Designing functionally graded materials with superior load-bearing properties. Acta Biomater. 2012, 8:1101-1108.
56. Zheng L., Kim H.M. Low-Rac1 activity downregulates MC3T3-E1 osteoblastic cell motility on a nanoscale topography prepared on polystyrene substrates in vitro. J. Biomed. Mater. Res. A 2013, 101:1629-1636.
57. Zhitomirskya D., Roetherb J.A., Boccaccini A.R., Zhitomirsky I. Electrophoretic deposition of bioactive glass/polymer composite coatings with and without HA nanoparticle inclusions for biomedical applications. J. Mater. Process. Technol. 2009, 209:1853-1860.
58. Zhou C.C., Hong Y.L, Zhang X.D. Applications of nanostructured calcium phosphate in tissue engineering. Biomater. Sci. 2013, 1:1012-1028.
59. Zhu W., Xiao J., Wang D., Liu J., Xiong J., Liu L., Zhang X., Zeng Y. Experimental study of nano-HA artificial bone with different pore sizes for repairing the radial defect. Int. Orthop. 2009, 33:567-571.
60. Zhu Y., Wu H., Sun S., Zhou T., Wu J., Wan Y. Designed composites for mimicking compressive mechanical properties of articular cartilage matrix. J. Mech. Behav. Biomed. Mater. 2014, 36:32-46.