Microstructure of Kinetic Spray Coatings: A Review

Journal of Thermal Spray Technology

Volumn 24, Issue 4, 2015, Pages 592-610

  Lee, Changhee ^a   Kim, Jaeick ^a  

^a Hanyang University   (South Korea)

Author keywords

adiabatic shear instability; cold gas dynamic spraying; microstructure

Indexed keywords

AUTOMOTIVE INDUSTRY; DEPOSITS; GAS DYNAMICS; MICROSTRUCTURAL EVOLUTION; MICROSTRUCTURE; SPRAYED COATINGS; STRAIN RATE; THERMAL ENERGY;

ADIABATIC SHEAR; COLD GAS DYNAMIC SPRAYING; CRYSTAL PHASE TRANSFORMATION; DEFENSE INDUSTRY; HIGH STRAIN RATES; INDUSTRIAL FIELDS; KINETIC SPRAY PROCESS; SUBSTRATE INTERFACE;

KINETICS;

EID: 84925440127     PISSN: 10599630     EISSN: 15441016     Source Type: Journal    
DOI: 10.1007/s11666-015-0223-5     Document Type: Review

References (101)

1. A.P. Alkhimov, A.N. Papyrin, V.F. Kosarev, N.I. Nesterovich, and M.M. Shushpanov, Gas-Dynamic Spray Method for Applying a Coating, US Patent 5,302,414; April 12, 1994
2. R.C. Dykhuizen and M.F. Smith, Gas Dynamic Principles of Cold Spray, J. Therm. Spray Technol., 1998, 7(2), p 205-212
3. V.F. Kosarev, S.V. Klinkov, A.P. Alkhimov, and A.N. Papyrin, On Some Aspects of Gas Dynamics of the Cold Spray Process, J. Therm. Spray Technol., 2003, 12(2), p 265-281
4. A.P. Alkhimov, V.F. Kosarev, and S.V. Klinkov, The Features of Cold Spray Nozzle Design, J. Therm. Spray Technol., 2001, 10(2), p 375-381
5. M. Grujicic, C.L. Zhao, C. Tong, W.S. DeRosset, and D. Helfritch, Analysis of the Impact Velocity of Powder Particles in the Cold-Gas Dynamic-Spray Process, Mater. Sci. Eng. A, 2004, 368, p 222-230
6. B. Jodoin, Cold Spray Nozzle Mach Number Limitation, J. Therm. Spray Technol., 2002, 11(4), p 496-507
7. W.-Y. Li and C.-J. Li, Optimal Design of a Novel Cold Spray Gun Nozzle at a Limited Space, J. Therm. Spray Technol., 2005, 14(3), p 391-396
8. H.-B. Jung, J.-I. Park, S.-H. Park, H.-J. Kim, C. Lee, and J.-W. Han, Effect of the Expansion Ratio and Length Ratio on a Gas-Particle Flow in a Converging-Diverging Cold Spray Nozzle, Met. Mater. Int., 2009, 15, p 967-970
9. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51, p 4379-4394
10. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54, p 729-742
11. G. Bae, Y. Xiong, S. Kumar, K. Kang, and C. Lee, General Aspects of Interface Bonding in Kinetic Sprayed Coatings, Acta Mater., 2008, 56, p 4858-4868
12. G. Bae, S. Kumar, S. Yoon, K. Kang, H. Na, H. Kim, and C. Lee, Bonding Features and Associated Mechanisms in Kinetic Sprayed Titanium Coatings, Acta Mater., 2009, 57, p 5654-5666
13. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25, p 681-688
14. T. Hussain, D.G. McCartney, P.H. Shipway, and T. Marrocco, Corrosion Behavior of Cold Sprayed Titanium Coatings and Free Standing Deposit, J. Therm. Spray Technol., 2011, 20(1-2), p 260-274
15. D. Dzhurinskiy, E. Maeva, E. Leshchinsky, and R.G. Maev, Corrosion Protection of Light Alloys Using Low Pressure Cold Spray, J. Therm. Spray Technol., 2012, 21(2), p 302-313
16. W.B. Choi, L. Li, V. Luzin, R. Neiser, T. Gnaupel-Herold, H.J. Prask, S. Sampath, and A. Gouldstone, Integrated Characterization of Cold Sprayed Aluminum Coatings, Acta Mater., 2007, 55, p 857-866
17. F. Gartner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, and M. Kocak, Mechanical Properties of Cold-Sprayed and Thermally Sprayed Copper Coatings, Surf. Coat. Technol., 2006, 200, p 6770-6782
18. Y. Tao, T. Xiong, C. Sun, L. Kong, X. Cui, T. Li, and G.-L. Song, Microstructure and Corrosion Performance of a Cold Sprayed Aluminum Coating on AZ91D Magnesium Alloy, Corros. Sci., 2010, 52, p 3191-3197
19. P. Richer, M. Yandouzi, L. Beauvais, and B. Jodoin, Oxidation Behavior of CoNiCrAlY Bond Coats Produced by Plasma, HVOF and Cold Gas Dynamic Spraying, Surf. Coat. Technol., 2010, 204, p 3962-3974
20. S.B. Pitchuka, D. Lahiri, G. Sundararajan, and A. Agarwal, Scratch-induced Deformation Behavior of Cold-sprayed Aluminum Amorphous/Nanocrystalline Coatings at Multiple Load Scales, J. Therm. Spray Technol., 2014, 23(3), p 502-513
21. Q. Zhang, C.-J. Li, C.-X. Li, G.-J. Yang, and S.-C. Lui, Study of Oxidation Behavior of Nanostructured NiCrAlY Bond Coatings Deposited by Cold Spraying, Surf. Coat. Technol., 2008, 202, p 3378-3384
22. H.-J. Kim, C. Lee, and S.-Y. Hwang, Superhard Nano WC-12%Co Coatings by Cold Spray Deposition, Mater. Sci. Eng. A, 2005, 391, p 243-248
23. A. Manap, A. Nakano, and K. Ogawa, The Protectiveness of Thermally Grown Oxides on Cold Sprayed CoNiCrAlY Bond Coat in Thermal Barrier Coating, J. Therm. Spray Technol., 2012, 21(3-4), p 586-596
24. R.Gr Maev and V. Leshchynsky, Air Gas Dynamic Spraying of Powder Mixtures: Theory and Application, J. Therm. Spray Technol., 2006, 15(2), p 198-205
25. E. Irissou, J.-G. Legoux, A.N. Ryabinin, B. Jodoin, and C. Moreau, Review on Cold Spray Process and Technology: Part I—Intellectual Property, J. Therm. Spray Technol., 2008, 17(4), p 495-516
26. H. Singh, T.S. Sidhu, and S.B.S. Kalsi, Cold Spray Technology: Future of Coating Deposition Processes, Frattura ed Integrita Strutturale, 2012, 22, p 69-84
27. J. Karthikeyan, Cold Spray Technology: International Status and USA Efforts, ASB Industries, December, 2004
28. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, 2002, 12, p 280-284
29. T. Nakamura, G. Qian, and C.C. Berndt, Effects of Pores on Mechanical Properties of Plasma-sprayed Ceramic Coatings, J. Am. Ceram. Soc., 2000, 83(3), p 578-584
30. T.-C. Jen, L. Li, W. Cui, Q. Chen, and X. Zhang, Numerical Investigations on Cold Gas Dynamic Spray Process with Nano- and Microsize Particles, Int. J. Heat Mass Transf., 2005, 48, p 4384-4396
31. X.K. Suo, T.K. Liu, W.Y. Li, Q.L. Suo, M.P. Planche, and H.L. Liao, Numerical Study on the Effect of Nozzle Dimension on Particle Distribution in Cold Spraying, Surf. Coat. Technol., 2013, 220, p 107-111
32. J. Pattison, S. Celotto, A. Khan, and W. O’Neill, Standoff Distance and Bow Shock Phenomena in the Cold Spray Process, Surf. Coat. Technol., 2008, 202, p 1443-1454
33. H. Tabbara, S. Gu, D.G. McCartney, T.S. Price, and P.H. Shipway, Study on Process Optimization of Cold Gas Spraying, J. Therm. Spray Technol., 2011, 20(3), p 608-620
34. S.H. Zahiri, C.I. Antonio, and M. Jahedi, Elimination of Porosity in directly Fabricated Titanium Via Cold Gas Dynamic Spraying, J. Mater. Process. Technol., 2009, 209, p 922-929
35. J. Lee, S. Shin, H.-J. Kim, and C. Lee, Effect of Gas Temperature on Critical Velocity and Deposition Characteristics in Kinetic Spraying, Appl. Surf. Sci., 2007, 253, p 3512-3520
36. C.-J. Li and W.-Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surf. Coat. Technol., 2003, 167, p 278-283
37. S. Shin, S. Yoon, Y. Kim, and C. Lee, Effect of Particle Parameters on the Deposition Characteristics of a Hard/Soft Particles Composite in Kinetic Spraying, Surf. Coat. Technol., 2006, 201, p 3457-3461
38. W. Wong, E. Irissou, A.N. Ryabinin, J.-G. Legoux, and S. Yue, Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings, J. Therm. Spray Technol., 2011, 20(1-2), p 213-226
39. G. Bae, K. Kang, H. Na, J.-J. Kim, and C. Lee, Effect of Particle Size on the Microstructure and Properties of Kinetic Sprayed Nickel Coatings, Surf. Coat. Technol., 2010, 204, p 3326-3335
40. G. Bae, J. Jang, and C. Lee, Correlation of Particle Impact Conditions with Bonding, Nanocrystal Formation and Mechanical Properties in Kinetic Sprayed Nickel, Acta Mater., 2012, 60, p 3524-3535
41. K. Kang, S. Yoon, Y. Ji, and C. Lee, Oxidation Dependency of Critical Velocity for Aluminum Feedstock Deposition in Kinetic Spraying Process, Mater. Sci. Eng. A, 2008, 486, p 300-307
42. W.-Y. Li, C.-J. Li, and H. Liao, Significant Influence of Particle Surface Oxidation on Deposition Efficiency, interface Microstructure and Adhesive Strength of Cold-sprayed Copper Coatings, Appl. Surf. Sci., 2010, 256, p 4953-4958
43. W.-Y. Li, C. Zhang, X.P. Guo, G. Zhang, H.L. Liao, C.-J. Li, and C. Coddet, Effect of Standoff Distance on Coating Deposition Characteristics in Cold Spraying, Mater. Des., 2008, 29, p 297-304
44. K. Binder, J. Gottschalk, M. Kollenda, F. Gartner, and T. Klassen, Influence of Impact Angle and Gas Temperature on Mechanical Properties of Titanium Cold Spray Deposits, J. Therm. Spray Technol., 2011, 20(1-2), p 234-242
45. T. Han, Z. Zhao, B.A. Gillispie, and J.R. Smith, Effeects of Spray Conditions on Coating Formation by the Kinetic Spray Process, J. Therm. Spray Technol., 2005, 14(3), p 373-383
46. T. Stoltenhoff, H. Kreye, and H.J. Richter, An Analysis of the Cold Spray Process and Its Coatings, J. Therm. Spray Technol., 2002, 11(4), p 542-550
47. X.-K. Wu, X.-L. Zhou, H. Cui, X. Zheng, and J.-S. Zhang, Deposition Behavior and Characteristics of Cold-sprayed Cu-Cr Composite Deposits, J. Therm. Spray Technol., 2012, 21(5), p 792-799
48. X.K. Suo, X.P. Guo, W.-Y. Li, M.P. Planche, and H.L. Liao, Investigation of Deposition Behavior of Cold-Sprayed Magnesium Coating, J. Therm. Spray Technol., 2012, 21(5), p 831-837
49. L. Ajdelsztajn, B. Jodoin, G.E. Kim, and J.M. Schoenung, Cold Spray Deposition of Nanocrystalline Aluminum Alloys, Metall. Mater. Trans. A, 2005, 36A, p 657-666
50. X.L. Zhou, S.J. Mou, X.K. Wu, and J.S. Zhang, Deposition Behavior of Mixed Binary Metallic Powders in Cold Spraying Process, Appl. Surf. Sci., 2011, 257, p 10628-10633
51. R.S. Lima, J. Karthikeyan, C.M. Kay, J. Lindemann, and C.C. Berndt, Microstructural Characteristics of Cold-Sprayed Nanostructured WC-Co Coatings, Thin Solid Films, 2002, 416, p 129-135
52. P.C. King, S.H. Zahiri, and M. Jahedi, Microstructural Refinement within a Cold-Sprayed Copper Particle, Metall. Mater. Trans. A, 2009, 40A, p 2115-2123
53. C. Borchers, F. Gartner, T. Stoltenhoff, H. Assadi, and H. Kreye, Microstructural and Macroscopic Properties of Cold Sprayed Copper Coatings, J. Appl. Phys., 2003, 93, p 10064-10070
54. Q. Wang, N. Birbilis, and M.-X. Zhang, Interfacial Structure Between Particles in an Aluminum Deposit Produced by Cold Spray, Mater. Lett., 2011, 65, p 1576-1578
55. K. Kang, J. Won, G. Bae, S. Ha, and C. Lee, Interfacial Bonding and Microstructural Evolution of Al in Kinetic Spraying, J. Mater. Sci., 2012, 47, p 4649-4659
56. G. Bae, K. Kang, J.-J. Kim, and C. Lee, Nanostructure Formation and Its Effects on the Mechanical Properties of Kinetic Sprayed Titanium Coating, Mater. Sci. Eng. A, 2010, 527, p 6313-6319
57. Y. Zou, W. Qin, E. Irissou, J.-G. Legoux, S. Yue, and J.A. Szpunar, Dynamic Recrystallization in the Particle/Particle Interfacial Region of Cold-Sprayed Nickel Coating: Electron Backscatter Diffraction Characterization, Scr. Mater., 2009, 61, p 899-902
58. 3 Substrates, Surf. Coat. Technol., 2009, 203, p 3206-3213
59. C. Moy, J. Cairnet, G. Ranzi, M. Jahedi, and S.P. Ringer, Investigating the Microstruture and Composition of Cold Gas-dynamic Spray (CGDS) Ti powder Deposited on Al 6063 Substrate, Surf. Coat. Technol., 2010, 204, p 3739-3749
60. Y.Y. Zhang and J.S. Zhang, Recrystallization in the Particles Interfacial Region of the Cold-Sprayed Aluminum Coating: Strain-Induced Boundary Migration, Mater. Lett., 2011, 65, p 1856-1858
61. C. Borchers, F. Gartner, T. Stoltenhoff, and H. Kreye, Microstructural Bonding Features of Cold Sprayed Face Centered Cubic Metals, J. Appl. Phys., 2004, 96, p 4288-4292
62. Y. Zou, D. Goldbaum, J.A. Szpunar, and S. Yue, Microstructure and Nanohardness of Cold-Sprayed Coatings: Electron Backscattered Diffraction and Nanoindentation Studies, Scr. Mater., 2010, 62, p 395-398
63. Y. Xion, K. Kang, G. Bae, S. Yoon, and C. Lee, Dynamic Amorphization and Recrystallization of Metals in Kinetic Spray Process, Appl. Phys. Lett., 2008, 92, p 194101
64. S. Yoon, G. Bae, Y. Xiong, S. Kumar, K. Kang, J.-J. Kim, and C. Lee, Strain-enhanced Nanocrystallization of a CuNiTiZr Bulk Metallic Glass Coating by a Kinetic Spraying Process, Acta Mater., 2009, 57, p 6191-6199
65. S. Guetta, M.H. Berger, F. Borit, V. Guipont, M. Jeandin, M. Boustie, Y. Ichikawa, K. Sakaguchi, and K. Ogawa, Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats, J. Therm. Spray Technol., 2009, 18, p 331-342
66. H. Lee, S. Lee, and K. Ko, Annealing Effects on the Intermetallic Compound Formation of Cold Sprayed Ni, Al Coatings, J. Mater. Process. Technol., 2009, 209, p 937-943
67. X.-J. Ning, J.-H. Kim, H.-J. Kim, and C. Lee, Characteristics and Heat Treatment of Cold-sprayed Al-Sn Binary Alloy Coatings, Appl. Surf. Sci., 2009, 255, p 3933-3939
68. G.-J. Yang, H.-T. Wang, C.-J. Li, and C.-X. Li, Effect of Annealing on the Microstructure and Erosion Performance of Cold-Sprayed FeAl Intermetallic Coatings, Surf. Coat. Technol., 2011, 205, p 5502-5509
69. W.-Y. Li, C.-J. Li, and H. Liao, Effect of Annealing Treatment on the Microstructure and Properties of Cold-Sprayed Cu Coating, J. Therm. Spray Technol., 2006, 15(2), p 206-211
70. H. Bu, M. Yandouzi, C. Ju, and B. Jodoin, Effect of Heat Treatment on the Intermetallic Layer of Cold Sprayed Aluminum Coatings on Magnesium Alloy, Surf. Coat. Technol., 2011, 205, p 4665-4671
71. W.-Y. Li, C.-J. Li, H. Liao, and C. Coddet, Effect of Heat Treatment on the Microstructure and Microhardness of Cold-sprayed Tin Bronze Coating, Appl. Surf. Sci., 2007, 253, p 5967-5971
72. 3 Intermetallic Composite Coating, Vacuum, 2009, 83, p 146-152
73. H. Lee, S. Jung, S. Lee, and K. Ko, Fabrication of Cold Sprayed Al-Intermetallic Compounds Coatings by Post Annealing, Mater. Sci. Eng. A, 2006, 433, p 139-143
74. T. Novoselova, S. Celotto, R. Morgan, P. Fox, and W. O’Neill, Formation of TiAl Intermetallics by Heat Treatment of Cold-sprayed Precursor Deposits, J. Alloys Compd., 2007, 436, p 69-77
75. K. Spencer and M.-X. Zhang, Heat Treatment of Cold Sprayings to Form Protective Intermetallic Layers, Scr. Mater., 2009, 61, p 44-47
76. K. Kang, H. Park, G. Bae, and C. Lee, Microstructure and Texture of Al Coating during Kinetic Spraying and Heat Treatment, J. Mater. Sci., 2012, 47, p 4053-4061
77. P.D. Eason, J.A. Fewkes, S.C. Kennett, T.J. Eden, K. Tello, M.J. Kaufman, and M. Tiryakioglu, On the Characterization of Bulk Copper Produced by Cold Gas Dynamic Spray Processing in as Fabricated and Annealed Conditions, Mater. Sci. Eng. A, 2011, 528, p 8174-8178
78. S.H. Zahiri, D. Fraser, and M. Jahedi, Recrystallization of Cold Spray-Fabricated CP Titanium Structures, J. Therm. Spray Technol., 2009, 18(1), p 16-22
79. A.C. Hall, D.J. Cook, R.A. Neiser, T.J. Roemer, and D.A. Hirschfeld, The Effect of a Simple Annealing Heat Treatment on the Mechanical Properties of Cold-sprayed Aluminum, J. Therm. Spray Technol., 2006, 15(2), p 233-238
80. E. Calla, D.G. McCartney, and P.H. Shipway, Effect of Deposition Conditions on the Properties and Annealing Behavior of Cold-Sprayed Copper, J. Therm. Spray Technol., 2006, 15, p 255-262
81. T. Schmidt, H. Assadi, F. Gartner, H. Richter, T. Stoltenhoff, H. Kreye, and T. Klassen, From Particle Acceleration to Impact and Bonding in Cold Spraying, J. Therm. Spray Technol., 2009, 18(5-6), p 794-808
82. S. Yoon, H. Kim, and C. Lee, Deposition Behavior of Bulk Amorphous NiTiZrSiSn According to the Kinetic and Thermal Energy Levels in the Kinetic Spraying Process, Surf. Coat. Technol., 2006, 200, p 6022-6029
83. H. Lee, S. Lee, H. Shin, and K. Ko, Mechanical Matching and Microstructural Evolution at the Coating/Substrate Interfaces of Cold-sprayed Ni, Al Coatings, J. Alloys Compd., 2009, 478, p 636-641
84. M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset, and D. Helfritch, Computational Analysis of the Interfacial Bonding Between Feed-Powder Particles and the Substrate in the Cold-Gas Dynamic-Spray Process, Appl. Surf. Sci., 2003, 219, p 211-227
85. Y. Xiong, G. Bae, X. Xiong, and C. Lee, The Effects of Successive Impacts and Cold Welds on the Deposition Onset of Cold Spray Coatings, J. Therm. Spray Technol., 2010, 19, p 575-585
86. E. Nes, Modelling of Work Hardening and Stress Saturation in FCC Metals, Prog. Mater. Sci., 1998, 41, p 129-193
87. E. Nes, T. Pettersen, and K. Marthinsen, On the Mechanisms of Work Hardening and Flow-Stress Saturation, Scr. Mater., 2000, 43, p 55-62
88. E. Nes and K. Marthinsen, Modeling the Evolution in Microstructure and Properties During Plastic Deformation of F.C.C.-Metals and Alloys—An Approach Towards a Unified Model, Mater. Sci. Eng. A, 2002, 322, p 176-193
89. E. Nes, K. Marthinsen, and Y. Brechet, On the Mechanisms of Dynamic Recovery, Scr. Mater., 2002, 47, p 607-611
90. L.E. Murr, K.P. Staudhammer, and M.A. Meyers, Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, Elsevier, Amsterdam, 1995
91. F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Elsevier, Oxford, 2004
92. N. Hansen, X. Huang, M. Moller, and A. Godfrey, Thermal Stability of Aluminum Cold Rolled to Large Strain, J. Mater. Sci., 2008, 43, p 6254-6259
93. R.A. Vandermeer and N. Hansen, Recovery Kinetics of Nanostructured Aluminum; Model and Experiment Original Research Article, Acta Mater., 2008, 56, p 5719-5727
94. −1, Metall. Mater. Trans. A, 2002, 33, p 345-362
95. H. Hu, Recrystallization of Metals, Gordon, New York, 1963
96. T. Hasegawa, T. Yakou, and U.F. Kocks, Length Changes and Stress Effects during Recovery of Deformed Aluminum, Acta Metall., 1982, 30, p 235-243
97. C. Borchers, F. Gartner, T. Stoltenhoff, and H. Kreye, Formation of Persistent Dislocation Loops by Ultra-High Strain-Rate Deformation During Cold Spraying, Acta Mater., 2005, 53, p 2991-3000
98. M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Perez-Prado, and T.R. McNelley, Microstructural Evolution in Adiabatic Shear Localization in Stainless Steel, Acta Mater., 2003, 51, p 1307-1325
99. H. Koivuluoto, M. Honkanen, and P. Vuoristo, Cold-Sprayed Copper and Tantalum Coatings—Detailed FESEM and TEM Analysis, Surf. Coat. Technol., 2010, 204, p 2353-2361
100. G. Bae, K. Kang, and C. Lee, Nanoscale Deformation Twinning at Ultrahigh Strain Rates During Kinetic Spraying of Nickel, Mater. Lett., 2012, 89, p 320-323
101. C. Zener and H. Hollomon, Effect of Strain Rate Upon Plastic Flow of Steel, J. Appl. Phys., 1944, 15, p 22-32