Cold spray deposition of nanocrystalline aluminum alloys

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 3, 2005, Pages 657-666

  Ajdelsztajn, Leonardo ^a   Jodoin, Bertrand ^b   Kim, George E ^c   Schoenung, Julie M ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b UNIVERSITY OF OTTAWA   (Canada)

^c Perpetual Technologies   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

COATINGS; COLD WORKING; CRYSTAL MICROSTRUCTURE; DEPOSITION; GRAIN SIZE AND SHAPE; INDENTATION; MILLING (MACHINING); NANOSTRUCTURED MATERIALS; NITROGEN; POWDER METALS; SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY;

COLD SPRAY DEPOSITION; COLD SPRAY TECHNOLOGY; LIQUID NITROGEN; MICROINDENTATION; NANOCRYSTALLINE ALUMINUM ALLOYS; NANOINDENTATION;

ALUMINUM ALLOYS;

EID: 16344383889     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0182-4     Document Type: Article

References (57)

1. C.C. Koch: Ann. Rev. Mater. Sci., 2003, vol. 5 (2), pp. 91-99.
2. E. Gaffet, N. Malhouroux, and M. Abdellaoui: J. Alloys Compounds, 1993, vol. 194, pp. 339-60.
3. C. Suryanarayana: Int. Mater. Rev., 1995, vol. 40, pp. 41-64.
4. C.C. Koch: Nanostr. Mater., 1993, vol. 2, pp. 109-29.
5. B.J.M. Aikin, T.H. Courtney, and D.R. Maurice: Mater. Sci. Eng., 1991, vol. A147, pp. 229-37.
6. F. Zhou, R. Luck, K. Lu, E.J. Lavernia, and M. Ruhle: Phil. Mag. A 2002, vol. 82 (5), pp. 1003-15.
7. C. Suryanarayana: Progr. Mater. Sci., 2001, vol. 46, pp. 1-184.
8. J. Eckert, J.C. Holzer, C.E. Kill III, and W.L. Johnson: J. Mater. Res., 1992, vol. 7, pp. 1751-61.
9. D. Oleszak and P.H. Shingu: J. Appl. Phys., 1996, vol. 79 (6), pp. 2975-80.
10. C.C. Koch: Nanostr. Mater., 1997, vol, 9, pp. 13-22.
11. F.A. Mohamed and Y. Xun: Mater. Sci. Eng. A, 2003, vol. 354A (1-2), pp. 133-39.
12. M.J. Luton, C.S. Jayanth, M.M. Disko, S. Matras, and J. Vallone: Mater. Res. Soc. Symp. Proc., 1989, vol. 132, pp. 79-86.
13. B. Huang, J. Vallone, and M.J. Luton: Nanostr. Mater., 1995, vol. 5, pp. 631-42.
14. R.J. Perez, B. Huang, and E.J. Lavernia: Nanostr. Mater., 1996, vol. 7, pp. 565-72.
15. J.C. Rawers, R.D. Govier, and G. Korth: Mater. Sci. Forum, 1995, vols. 179-181, pp. 363-68.
16. F. Zhou, J. Lee, S. Dallek, and E.J. Lavernia: J. Mater. Res., 2001, vol. 16, pp. 3451-58.
17. F. Zhou, R. Rodriguez, and E.J. Lavernia: Mater. Sci. Forum, 2002, vol. 386-388, pp. 409-14.
18. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103-89.
19. X.K. Sun, H.T. Cong, M. Sun, and M.C. Yang: Metall. Mater. Trans. A 2000, vol. 31A, pp. 1017-24.
20. V.L. Tellkamp, A. Melmed, and E.J. Lavernia: Metall. Mater. Trans. A 2001, vol 32A, pp. 2335-43.
21. R.W. Hayes, R. Rodrigueza, and E.J. Lavernia: Acta Mater., 2001, vol. 49, pp. 4055-68.
22. L. Ajdelsztajn, J. Lee, and E.J. Lavernia: Metall. Trans. A, 2002, vol. 33A, pp. 647-55.
23. L. Ajdelsztajn, F. Tang, G.E. Kim, V. Provenzano, and J.M. Schoenung: Mater. Sci Eng. A, 2002, vol. A338, pp. 33-43.
24. L. Ajdelsztajn, J. He, G.E. Kim, V. Provenzano, E.J. Lavernia, and J.M. Schoenung: Materials Science II, Proc. TMS, San Diego, CA, Mar. 2003, TMS, Warrendale, PA, 2003, pp. 71-80.
25. A.P. Alkhimov, V.F. Kosarev, and A.N. Papyrin: Sov. Phys. Dokl., 1990, vol. 35 (12), pp. 1047-49.
26. C.J. Li and W.Y. Li: Surf. Coating Technol., 2003, vol. 167 (2-3), pp. 278-83.
27. A.P. Alkhimov, V.F. Kosarev, and A.N. Papyrin: J. Appl. Mech. Tech. Phys., 1998, vol. 39 (2), pp. 318-23.
28. R.C. Dykhuizen and R.A. Neiser: ITSC Proc., 2003, pp. 19-26.
29. A.N. Papyrin, V.F. Kosarev, S.V. Klinkov, and A.P. Alkhimov: ITSC Proc., 2002, pp. 380-84.
30. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye: Acta Mater., 2003, vol. 51, pp. 4379-94.
31. R.C. Dykhuizen, M.F. Smith, D.L. Gilmorew, and R.A. Neiser: J. Thermal Spray Technol., 1999, vol. 8 (4), pp. 559-64.
32. A.P. Alkhimov, S.V. Klkinkov, V.F. Kosarev, and A.N. Papyrin: J. Appl. Mech. Technol. Phys., 1997, vol. 38 (2), pp. 324-30.
33. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer, and M.F. Smith: J. Thermal Spray Technol., 1999, vol. 8 (4), pp. 576-82.
34. T.H. Van Steenkiste, J.R. Smith, and R.E. Teetse: Surf. Coating Technol., 2002, vol. 154, pp. 237-52.
35. J. Vlcek, H. Huber, H. Voggenreiter, A. Fischer, E. Lugscheider, and H. Hallen: ITSC Proc., 200l, pp. 417-22.
36. T.H. Van Steenkiste, J.R. Smith, and R.E. Teetse: Surf. Coating Technol., 1999, vol. 111, pp. 62-71.
37. R. Morgan, P. Fox, J. Pattison, C. Sutcliffe, and W. O'Neill: Mater. Lett., 2004, vol. 58, pp. 1317-20.
38. V.L. Tellkamp, S. Dallek, D. Cheng, and E.J. Lavernia: J. Mater. Res. 2001, vol. 16 (4), pp. 938-44.
39. R.W. Hayes, V. Tellkamp, and E.J. Lavernia: J. Mater. Res., 2000, vol. 15 (10), pp. 2215-22.
40. F. Zhou, X.Z. Liao, Y.T. Zhu, S. Dallek, and E.J. Lavernia: Acta Mater., 2003, vol. 51, pp. 2777-91.
41. B.Q. Han, F.A. Mohamed, and E.J. Lavernia: J. Mater. Sci., 2003, vol. 38 (15), pp. 3319-24.
42. X.Z. Liao, J.Y. Huang, Y.T. Zhu, F. Zhou, and E.J. Lavernia: Phil. Mag., 2003, vol. 83 (26), pp. 3065-75.
43. B. Q. Han, E.J. Lavernia, and F.A. Mohamed: Phil. Mag. Lett., 2003, vol. 83, pp. 89-96.
44. Structural Alloys Handbook, 1996, ed., John M. (Tim) Holt, technical ed., and C.Y. Ho, ed., CINDAS/Purdue University, West Lafayette, IN, 1996.
45. B. Jodoin: J. Thermal Spray Technol., 2002, vol. 11 (4), pp. 496-507.
46. W.P. Jones and B.E. Launder: Int. J. Heat Mass Transfer, 1972, vol. 15, pp. 301-14.
47. D. Cheng, G. Trapaga, J.W. McKelliget, and E.J. Lavernia: Modelling Simul. Mater. Sci. Eng., 2003, vol. 11, pp. R1-R31.
48. A. Jameson: Trans. Am. Soc. Mech. Eng., 1983, vol. 50 (4b), pp. 1052-73.
49. A.H. Shapiro: The Dynamics and Thermodynamics of Compressible Fluid Flow, Ronald Press Company, New York, NY, 1956.
50. X. Li and B. Bhushan: Mater. Characterization, 2002, vol. 48 pp. 11-36.
51. C. Suryanarayana and H.G. Norton: X-Ray Diffraction: A Practical Approach, Plenum Press, New York, NY, 1998, p. 207.
52. Metals Handbook, vol. 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990.
53. M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset, and D. Helfritch: Appl. Surf. Sci., 2003, vol. 219, pp. 211-27.
54. B. Crossland: Explosive Welding of Metals and Its Application, Clarendon Press, Oxford, United Kingdom, 1982.
55. H. El-Sobky: in Explosive Welding, Forming and Compaction, T.Z. Blazynski, ed., Applied Science Publishers, London, 1983, ch. 6.
56. E.O. Hall: Proc. Phys. Soc. (London), 1951, vol. B64, pp. 747-53.
57. N.J. Petch: J. Iron. Steel Inst., 1953, vol. 174, pp. 25-28.