Scratch-induced deformation behavior of cold-sprayed aluminum amorphous/nanocrystalline coatings at multiple load scales

Journal of Thermal Spray Technology

Volumn 23, Issue 3, 2014, Pages 502-513

  Pitchuka, Suresh Babu ^a,b   Lahiri, Debrupa ^b   Sundararajan, G ^a   Agarwal, Arvind ^b  

^a INTERNATIONAL ADVANCED RESEARCH CENTRE FOR POWDER METALLURGY AND NEW MATERIALS ARCI   (India)

^b Florida International University   (United States)

Author keywords

aluminum amorphous nanocrystalline alloy; coefficient of friction; cold spraying; scratch; shear bands; wear

Indexed keywords

EID: 84894503023     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-013-0021-x     Document Type: Review

References (49)

1. A. Inoue, Amorphous, Nanoquasicrystalline and Nanocrystalline Alloys in Al-Based Systems, Prog. Mater. Sci., 1998, 43, p 365-520
2. J.H. Perepezko and R.J. Hebert, Amorphous Aluminum Alloys - Synthesis and Stability, JOM, 2002, 54, p 34-39
3. B.J. Yang, J.H. Yao, Y.S. Chao, J.Q. Wang, and E. Ma, Developing Aluminum-Based Bulk Metallic Glasses, Philos. Mag., 2010, 90, p 3215-3231
4. A. Inoue, N. Matsumoto, and T. Masumoto, Al-Ni-Y-Co Amorphous Alloys with High Mechanical Strengths, Wide Supercooled Liquid Region and Large Glass-Forming Capacity, Mater. Trans. JIM, 1990, 31, p 493-500
5. x (M = Mn, Fe or Co) Amorphous Alloys Containing Nanoscale fcc-Al Particles, Mater. Trans. JIM, 1991, 32, p 599-608
6. 2 Alloy, J. Non-Cryst. Solids, 2000, 273, p 271-276
7. D.V. Louzguine and A. Inoue, Influence of a Supercooled Liquid on Crystallization Behaviour of Al-Y-Ni-Co Metallic Glass, Mater. Lett., 2002, 54, p 75-80
8. A. Inoue, S. Sobu, D.V. Louzguine, H. Kimura, and K. Sasamori, Ultra High Strength Al-Based Amorphous Alloys Containing Sc, J. Mater. Res., 2004, 19, p 1539-1543
9. Y.H. Kim, A. Inoue, and T. Masumoto, Increase in Mechanical Strength of Al-Y-Ni Amorphous Alloys by Dispersion of Nanoscale fcc-Al Particles, Mater. Trans. JIM, 1991, 32, p 331-338
10. 4.3 Alloys in the Amorphous, Nanocrystalline and Crystalline States: Resistance to Micrometer-Scale Pit Formation, Electrochim. Acta, 2003, 48, p 1223-1234
11. 2 Amorphous Alloys, J. Rare Earths, 2007, 25, p 381-384
12. 2 Amorphous Alloy, J. Alloys Compd., 2009, 478, p 763-766
13. A. Roy, A.K. Mandhyan, K.L. Sahoo, J. Banhart, and I. Chattoraj, Electrochemical Response of Amorphous and Devitrified Al-Ni-La-X (X = Ag, Cu) Alloys, Mater. Corr., 2009, 60, p 431-437
14. 6 Alloy in 0.01 M NaCl Solution, Mater. Lett., 2007, 61, p 1715-1717
15. D. Lahiri, P. Gill, C. Zhang, V. Singh, S. Scudino, J. Karthikeyan, N. Munroe, S. Seal, and A. Agarwal, Cold Sprayed Aluminum Based Glassy Coatings: Synthesis, Wear and Corrosion Properties, Surf. Coat. Technol., 2013, 232, p 33-40
16. Y. Kawamura, H. Mano, and A. Inoue, Nanocrystalline Aluminum Bulk Alloys with a High Strength of 1420 MPa Produced by the Consolidation of Amorphous Powders, Scripta Mater., 2001, 44, p 1599-1604
17. 5 Bulk Alloy Produced by Spark Plasma Sintering of Gas Atomized Powders, J. Mater. Res., 2009, 24, p 2909-2916
18. A. Dutta, P.S. De, R.S. Mishra, and T.J. Watson, Deformation Behavior of an Ultrafine-Grained Al-Ni-Y-Co-Sc Alloy, Mater. Sci. Eng. A, 2009, 513-514, p 239-246
19. J.S. Kim, I.V. Povstugar, P.P. Choi, E.P. Yelsukov, and Y.S. Kwon, Synthesis of Al-Y-Ni-Co Composites by Mechanical Alloying and Consecutive Spark-Plasma Sintering, J. Alloys Compd., 2009, 486, p 511-514
20. 3 Glassy Powder, J. Alloys Compd., 2010, 491, p 137-142
21. 10 Composites Prepared by Mechanical Alloying and Hot Isostatic Pressing, Mater. Sci. Eng. A, 2012, 555, p 21-27
22. H.J. Kim, K.M. Lim, B.G. Seong, and C.G. Park, Amorphous Phase Formation of Zr-Based Alloy Coating by HVOF Spraying Process, J. Mater. Sci., 2001, 36, p 49-54
23. 1 Surface Coatings, Mater. Sci. Eng. A, 2004, 375-377, p 625-629
24. H. Choi, J. Kim, C. Lee, and K.H. Lee, Critical Factors Affecting the Amorphous Phase Formation of NiTiZrSiSn Bulk Amorphous Feedstock in Vacuum Plasma Spray, J. Mater. Sci., 2005, 40, p 3873-3875
25. A.P. Wang, Z.M. Wang, J. Zhang, and J.Q. Wang, Deposition of HVAF-Sprayed Ni-Based Amorphous Metallic Coatings, J. Alloys Compd., 2007, 440, p 225-228
26. A. Kobayashi, S. Yano, H. Kimura, and A. Inoue, Fe-Based Metallic Glass Coatings Produced by Smart Plasma Spraying Process, Mater. Sci. Eng. B, 2008, 148, p 110-113
27. Z. Zhou, L. Wang, F.C. Wang, H.F. Zhang, Y.B. Liu, and S.H. Xu, Formation and Corrosion Behavior of Fe-Based Amorphous Metallic Coatings by HVOF Thermal Spraying, Surf. Coat. Technol., 2009, 204, p 563-570
28. A. Papyrin, V. Kosarev, S. Klinkov, and V. Fomin, Cold Spray Technology, A. Papyrin, Ed., Elsevier, 2007
29. L. Ajdelsztajn, B. Jodion, G.K. Kim, and J. Schoenung, Cold Spray Deposition of Nanocrystalline Aluminum Alloys, Metall. Mater. Trans. A, 2005, 36, p 657-666
30. 2N and CrN Thin Films Using Constant and Ramped Load Nanoscratch Techniques, Surf. Coat. Technol., 2001, 146-147, p 357-362
31. J. Michler, R. Rabe, J.L. Bucaille, B. Moser, P. Schwaller, and J.M. Breguet, Investigation of Wear Mechanisms Through In Situ Observation During Microscratching Inside the Scanning Electron Microscope, Wear, 2005, 259, p 18-26
32. S.R. Bakshi, D. Lahiri, R.R. Patel, and A. Agarwal, Nanoscratch Behavior of Carbon Nanotube Reinforced Aluminum Coatings, Thin Solid Films, 2010, 518, p 1703-1711
33. Y. Huang, Y.L. Chiu, J. Shen, Y. Sun, J. Jhon, and J. Chen, Mechanical Performance of Metallic Glasses During Nanoscratch Tests, Intermetallics, 2010, 18, p 1056-1061
34. J.G. Wang, B.W. Choi, T.G. Neih, and C.T. Liu, Nano-scratch Behavior of a Bulk Zr-10Al-5Ti-17.9Cu-14.6Ni Amorphous Alloy, J. Mater. Res., 2000, 15, p 913-922
35. M. Chavan, M. Ramakrishna, P.S. Pahni, D.S. Rao, and G. Sundararajan, The Influence of Process Parameters and Heat Treatment on the Properties of Cold Sprayed Silver Coatings, Surf. Coat. Technol., 2011, 205, p 4798-4807
36. D.V. Louzguine and A. Inoue, Crystallization Behaviour of Al-Based Metallic Glasses Below and Above the Glass-Transition Temperature, J. Non-Cryst. Solids, 2002, 311, p 281-293
37. J.S. Blazquez, E. Fazakas, H. Dimitrov, J. Latuch, L. Varga, and T. Kulik, Effect of Substitution of Rare Earth by Mischmetal on the Devitrification Process of Al-X-Ni-Co (X = Y, Ce, Mm) Alloys, J. Non-Cryst. Solids, 2005, 351, p 158-166
38. X.P. Li, M. Yan, B.J. Yang, J.Q. Wang, G.B. Schaffer, and M. Qian, Crystallization Behaviour and Thermal Stability of Two Aluminium-Based Metallic Glass Powder Materials, Mater. Sci. Eng. A, 2011, 530, p 432-439
39. W.C. Oliver and G.M. Pharr, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments, J. Mater. Res., 1992, 7, p 1564-1583
40. P.S. Phani, D.S. Rao, S.V. Josh, and G. Sundararajan, Effect of Process Parameters and Heat Treatments on Properties of Cold Sprayed Copper Coatings, J. Therm. Spray. Technol., 2007, 16, p 425-434
41. H.P. Kim, P.J. Warren, B. Cantor, and H.R. Lee, Mechanical Properties of Partially Crystallized Aluminum Based Amorphous Alloys, Nanostruct. Mater., 1999, 11, p 241-247
42. A.L. Geer, Partially or Fully Devitrified Alloys for Mechanical Properties, Mater. Sci. Eng. A, 2001, 304-306, p 68-72
43. 8 Bulk Metallic Glass, Mater. Des., 2013, 47, p 706-710
44. K. Ohtera, A. Inoue, and T. Masumoto, High Mechanical Strength of Aluminum-Based Crystalline Alloys Produced by Warm Consolidation of Amorphous Powder, Mater. Sci. Eng. A, 1919, 134, p 1212-1214
45. J.F. Archard, Contact and Rubbing of Flat Surfaces, J. Appl. Phys., 1953, 24, p 981-988
46. Z.F. Zhang, G. He, J. Eckert, and L. Schultz, Fracture Mechanisms in Bulk Glassy Materials, Phys. Rev. Lett., 2003, 91, p 045505-1-045505-4
47. 3 Bulk Metallic Glass, Acta Mater., 2003, 51, p 1167-1179
48. C.A. Schuh, T.C. Hufnagel, and U. Ramamurthy, Mechanical Behavior of Amorphous Alloys, Acta Mater., 2007, 55, p 4067-4109
49. A.C. Lund and C.A. Schuh, The Mohr-Coulomb Criterion from Unit Shear Processes in Metallic Glass, Intermetallics, 2004, 12, p 1159-1165