Corrosion protection of light alloys using low pressure cold spray

Journal of Thermal Spray Technology

Volumn 21, Issue 2, 2012, Pages 304-313

  Dzhurinskiy, D ^a   Maeva, E ^a   Leshchinsky, Ev ^a   Maev, R Gr ^a  

^a UNIVERSITY OF WINDSOR   (Canada)

Author keywords

AA2024; Aluminum; Coating; Corrosion; Corrosion protection; Low pressure cold spray

Indexed keywords

AA2024; AA2024-T3; ACCELERATED CORROSION; CLADDING STRUCTURES; COLD SPRAY; CORROSION ATTACK; CORROSION KINETICS; ELECTROCHEMICAL BEHAVIORS; ELECTROCHEMICAL METHODS; LIGHT ALLOYS; LOW PRESSURES; MAINTENANCE SCHEDULES; MATERIALS CHARACTERIZATION; MICRO-STRUCTURAL; OPEN CIRCUIT POTENTIAL; RESISTANCE PROPERTIES; SALT SPRAY; TIME-PERIODS;

ALLOYS; ALUMINUM; ALUMINUM CLADDING; COATINGS; CORROSION; CORROSION PROTECTION; CORROSION RESISTANCE; MAGNESIUM; MECHANICAL PROPERTIES; PROTECTIVE COATINGS; REPAIR;

ALUMINUM COATINGS;

EID: 84861831876     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-011-9729-7     Document Type: Review

References (55)

1. ASM Handbook, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th ed., ASM International Committee Handbook, vol. 2, 1992
2. 2CuMg) Particles in Aluminum Alloy 2024-T3, J. Electrochem. Soc., 1997, 144, p 2621-2628 (Pubitemid 127585391)
3. V. Guillaumin and G. Mankowski, Localized Corrosion of 2024 T351 Aluminium Alloy in Chloride Media, Corros. Sci., 1999, 41, p 421-438 (Pubitemid 29278127)
4. C. Blanc, S. Gastaud, and G. Mankowski, Mechanistic Studies of the Corrosion of 2024 Aluminum Alloy in Nitrate Solutions, J. Electrochem. Soc., 2003, 150, p 396-404
5. G.O. Ilevbare, O. Schneider, R.G. Kelly, and J.R. Scully, In Situ Confocal Laser Scanning Microscopy of AA 2024-T3 Corrosion Metrology I: Localized Corrosion of Particles, J. Electrochem. Soc., 2004, 151, p 453-464
6. 2CuMg, J. Electrochem. Soc., 1999, 146, p 4424-4428 (Pubitemid 129592146)
7. F. Andreatta, H. Terryn, and J.H.W. de Wit, Corrosion Behaviour of Different Tempers of AA7075 Aluminium Alloy, Electrochim. Acta, 2004, 49, p 2851
8. N. Birbilis and R.G. Buchheit, Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys: An Experimental Survey and Discussion, J. Electrochem. Soc., 2005, 152, p 140-151
9. ASM Handbook, Corrosion: Fundamentals, Testing, and Protection, vol. 13A, 2003, p 1779-1793
10. T. Burakowski, Surface Engineering of Metals, CRC Press, Boca Raton, 1999
11. G. Bolelli, L. Lusvarghi, and M. Barletta, Heat Treatment Effects on the Corrosion Resistance of Some HVOF-Sprayed Metal Alloy Coatings, Surf. Coat. Technol., 2008, 202, p 4839-4847 (Pubitemid 351773139)
12. G. Ballerini, U. Bardi, R. Bignucolo, and G. Ceraolo, About Some Corrosion Mechanisms of Magnesium Alloy, Corros. Sci., 2005, 47, p 2173-2184 (Pubitemid 40992513)
13. J. Kawakita, S. Kuroda, T. Fukushima, and T. Kodama, Corrosion Resistance of HVOF Sprayed HastelloyC Nickel Base Alloy in Seawater, Corros. Sci., 2003, 45, p 2819-2835 (Pubitemid 37554349)
14. J. Kawakita, S. Kuroda, T. Fukushima, and T. Kodama, Development of DenseCorrosion ResistantCoatings by an ImprovedHVOF Spraying Process, Sci. Technol. Adv. Mater., 2003, 4, p 281-289
15. M.B. Kannan, W. Dietzel, R. Zeng, R. Zettler, and J.F. Santos, A Study on the SCC Susceptibility of Friction Stir Welded AZ31 Mg Sheet, Mater. Sci. Eng. A, 2007, 460/461, p 243-250 (Pubitemid 46593825)
16. D. Dzhurinskiy, R. Maev, and V. Leshchynsky, Particle Consolidation by Low Pressure Cold Spray: Modeling, Experiments and Applications, 2nd Canadian Cold spray Conference (Montreal, Canada), 2010
17. R.G. Maev and V. Leshchinsky, Low Pressure Gas Dynamic Spray: Shear Localization During Particle Shock Consolidation, Building on 100 Years of Success: Proceedings of the 2006 International Thermal Spray Conference, 15-18 May 2006 (Seattle, WA, USA), ASM International
18. R.Gr. Maev and V. Leshchynsky, Introduction to Low Pressure Gas Dynamic Spray, John Willey and Son-VCH, New York, 2007, p 181-214
19. Department of Defense Manufacturing Process Standard, Materials Deposition: Cold Spray, MIL-STD-3021, 2008
20. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51, p 4379-4394
21. T.H. Van Steenkiste, J.R. Smith, R.E. Teets, J.J. Moleski, D.W. Gorkiewicz, R.P. Tison, D.R. Marantz, K.A. Kowalsky, W.L. Riggs, P.H. Zajchowski, B. Pilsner, R.C. McCune,and K.J. Barnett, Kinetic Spray Coatings, Surf. Coat. Technol., 1999, 111, p 62-71 (Pubitemid 32626227)
22. H.J. Choi and M. Lee, Application of a Cold Spray Technique to the Fabrication of a Copper Canister for the Geological Disposal of CANDU Spent Fuels, Nucl. Eng. Des., 2010, 240, p 2714-2720
23. N. Bala, H. Singh, and S. Prakash, Characterization and High- Temperature Oxidation Behavior of Cold-Sprayed Ni-20Cr and Ni-50Cr Coatings on Boiler Steels, Metall. Mater. Trans. A, 2011, 42, p 3399-3416
24. 3 Coatings by Cold Spray, Appl. Surf. Sci., 2005, 252, p 1891-1898 (Pubitemid 41668441)
25. 3 Cold Spray Coatings to Improve the Surface Properties of Magnesium Alloys, Surf. Coat. Technol., 2009, 204, p 336-344
26. 3 Composite Coatings on AZ91D Magnesium Alloy, Appl. Surf. Sci., 2009, 256, p 261-266
27. P.E. Morris and R.C. Scarerry, Predicting Corrosion Rates with the Potentiostat, Corrosion, 1972, 28, p 444
28. S. Frangini and N. De Cristofaro, Analysis of the Galvanostatic Polarization Method for Determining Reliable Pitting Potentials on Stainless Steel in Crevice-Free Condition, Corros. Sci., 2003, 45, p 2769-2786 (Pubitemid 38002841)
29. V. Champane, The Cold Spray Materials Deposition Process, Woodhead Publishing Ltd, Cambridge, 2007
30. I.J. Hwang, D.Y. Hwang, Y.M. Kim, B. Yoo, and D.H. Shin, Formation of Uniform Passive Oxide Layers on High Si Content Al Alloy by Plasma Electrolytic Oxidation, J. Alloys Compd., 2010, 504, p 527-530
31. M.A. Baker, W. Gissler, S. Klose, M. Trampert, and F. Weber, Morphologies and Corrosion Properties of PVD Zn-Al Coatings, Surf. Coat. Technol., 2000, 125, p 207
32. L. Guzman, M. Adami, W. Gissler, S. Klose, and S. De Rossi, Vapour Deposited Zn-Cr Alloy Coatings for Enhanced Manufacturing and Corrosion Resistance of Steel Sheets, Surf. Coat. Technol., 2000, 125, p 218
33. Y. Tao, T. Xiong, C. Sun, L. Kong, X. Cui, and T. Li, Microstructure and Corrosion Performance of a Cold Sprayed Aluminium Coating on AZ91D Magnesium Alloy, Corros. Sci., 2010, 52, p 3191-3197
34. B. DeForce, T. Eden, J. Potter, V. Champagne, P. Leyman, and D. Helfritch, Application of Aluminum Coatings for the Corrosion Protection of Magnesium by Cold Spray, Tri-Service Corrosion Conference, Denver, USA, 2007
35. S. Maitra and G.C. English, Mechanism of Localized Corrosion of 7075 Alloy Plate, Metall. Trans. A, 1981, 12A, p 535
36. R.E. Bolz and G.L. Tuve, CRC Handbook of Tables for Applied Engineering Science, CRC Press, Boca Raton, 1973, p 262
37. H. Li, X. Li, M. Sun, H. Wang, and G. Huang, Corrosion Resistance of Cold-Sprayed Zn-50Al Coatings in Seawater, J. Chin. Soc. Corros. Prot., 2010, 30, p 62-66
38. M. Yandouzi, P. Richer, and B. Jodoin, Particulate Reinforced Al-12Si Alloy Composite Coatings Produced by the Pulsed Gas Dynamic Spray Process: Microstructure and Properties, Surf. Coat. Technol., 2009, 203, p 3260
39. L. Hai-xiang, S. Ming-xian, L. Xiang-bo, and W. Hong-ren, Residual Stress Measurement of Metal Surface, Chin. J. Nonferr. Met., 2010, 20, p 1353-1359
40. H.M. Hawthorne and Y. Xie, An Attempt to Evaluate Cohesion in WC/Co/Cr Coatings by Controlled Scratching, Meccanica, 2001, 36, p 675-682 (Pubitemid 34959713)
41. W. Li, C. Zhang, H. Liao, J. Li, and C. Coddet, Characterizations of Cold-Sprayed Nickel-Alumina Composite Coating with Relatively Large Nickel-Coated Alumina Powder, Surf. Coat. Technol., 2008, 202, p 4855-4860 (Pubitemid 351773140)
42. W. Zhang and G.S. Frankel, Transitions Between Pitting and Intergranular Corrosion in AA2024, Electrochem. Acta, 2003, 48, p 1193-1210
43. R.T. Foley and T.H. Nguyen, Chemical Nature of Aluminum Corrosion-2. The Initial Dissolution Step, J. Electrochem. Soc., 1982, 192, p 129
44. C.B. Breslin, G. Treacy, and W.M. Cornell, Studies on the Passivation of Aluminium in Chromate and Molybdate Solutions, Corros. Sci., 1994, 36, p 1143-1154 (Pubitemid 282373)
45. H. Takahashi, M. Sakairi, and T. Kikuchi, Three-Dimensional Microstructure Fabrication with Aluminum Anodizing, Laser Irradiation, and Electrodeposition, Mod. Asp. Electrochem., 2010, 46, p 59-174
46. M. Pourbaix, Atlas of Electrochemical Equilibria in Aqueous Solutions, NACE, Houston, TX, 1975
47. T. Hong and M. Nagumo, Effect of Surface Roughness on Early Stages of Pitting Corrosion of Type 301 Stainless Steel, Corros. Sci., 1997, 39, p 665
48. G.T. Sasaki Burstein, The Generation of Surface Roughness During Slurry Erosion-Corrosion and Its Effect on the Pitting Potential, Corros. Sci., 1996, 38, p 2111
49. W. Li and D.Y. Li, Influence of Surface Morphology on Corrosion and Electronic Behavior, Acta Mater., 2006, 54, p 445-452 (Pubitemid 41780892)
50. 2O, Cem. Concr. Res., 1999, 29, p 1005-1011
51. 2 Coatings, Mater. Chem. Phys., 2009, 118, p 37-45
52. M. Metzeger and J. Zahavi, Passivity of Metals, The Electrochemical Soc. Inc., Princeton, NJ, 1979, p 960
53. P.L. Cabot, J.A. Garrido, E. Perez, and W. Proud, EIS Study of Heat-Treated Al-Zn-Mg Alloys in the Passive and Transpassive Potential Regions, Electrochem. Acta, 1995, 40, p 447
54. T. Long, S. Yin, K. Takabatake, P. Zhnag, and T. Sato, Synthesis and Characterization of ZnO Nanorods and Nanodisks from Zinc Chloride Aqueous Solution, Nanoscale Res. Lett., 2009, 3, p 247-253
55. A. Pardo, M.C. Marino, and F. Viejo, Influence of Reinforcement Proportion and Matrix Composition on Pitting Corrosion Behaviour of Cast Aluminium Matrix Composites (A3xxx/SiCp), Corros. Sci., 2005, 47, p 1750-1764 (Pubitemid 40346226)