Induction machine bearing fault detection by means of statistical processing of the stray flux measurement

IEEE Transactions on Industrial Electronics

Volumn 62, Issue 3, 2015, Pages 1846-1854

  Frosini, Lucia ^a   Harlisca, Ciprian ^b   Szabo, Lorand ^b  

^a UNIVERSITY OF PAVIA   (Italy)

^b TECHNICAL UNIVERSITY OF CLUJ NAPOCA   (Romania)

Author keywords

AC machines; ball bearings; electric machines; fast Fourier transforms; fault detection; fault diagnosis; fault location; induction motors; rotating machines; statistical analysis

Indexed keywords

ASYNCHRONOUS MACHINERY; BALL BEARINGS; BEARINGS (MACHINE PARTS); ELECTRIC FAULT CURRENTS; ELECTRIC FAULT LOCATION; ELECTRIC MACHINERY; FAILURE ANALYSIS; FAST FOURIER TRANSFORMS; INDUCTION MOTORS; PROBES; STATISTICAL METHODS; VIBRATION ANALYSIS;

AC MACHINE; DETECTION METHODS; DIAGNOSTIC TECHNIQUES; ELECTRICAL MACHINE; FLUX MEASUREMENTS; INDUCTION MACHINES; ROTATING MACHINE; STATISTICAL PROCESSING;

FAULT DETECTION;

EID: 84923206441     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2014.2361115     Document Type: Article

References (44)

1. H. Henao et al., "Trends in fault diagnosis for electrical machines-A review of diagnostic techniques," IEEE Ind. Electron. Mag., vol. 8, no. 2, pp. 31-42, Jun. 2014.
2. P. Zhang, Y. Du, T. G. Habetler, and B. Lu, "A survey of condition monitoring and protection methods for medium-voltage induction motors," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 34-46, Jan./Feb. 2011.
3. A. Garcia-Perez, R. de Jesus Romero-Troncoso, E. Cabal-Yepez, and R. A. Osornio-Rios, "The application of high-resolution spectral analysis for identifying multiple combined faults in induction motors," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 2002-2010, May 2011.
4. F. Immovilli, A. Bellini, R. Rubini, and C. Tassoni, "Diagnosis of bearing faults in induction machines by vibration or current signals: A critical comparison," IEEE Tran. Ind. Appl., vol. 46, no. 4, pp. 1350-1359, Jul./Aug. 2010.
5. F. Immovilli, C. Bianchini, M. Cocconcelli, A. Bellini, and R. Rubini, "Bearing fault model for induction motor with externally induced vibration," IEEE Tran. Ind. Appl., vol. 60, no. 8, pp. 3408-3418, Jul./Aug. 2013.
6. M. Blodt, P. Granjon, B. Raison, and G. Rostaing, "Models for bearing damage detection in induction motors using stator current monitoring," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1813-1822, Apr. 2008.
7. S. H. Kia, H. Henao, and G.-A. Capolino, "A high-resolution frequency estimation method for three-phase induction machine fault detection," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2305-2314, Aug. 2007.
8. R. Romary, R. Pusca, J. Lecointe, and J. Brudny, "Electrical machines fault diagnosis by stray flux analysis," in Proc. IEEE WEMDCD, Paris, France, 2013, pp. 247-256.
9. N. Mehala and R. Dahiya, "Detection of bearing faults of induction motor using Park's vector approach," Int. J. Eng. Technol., vol. 2, no. 4, pp. 263- 266, 2010.
10. A. Ibrahim, M. El Badaoui, F. Guillet, and F. Bonnardot, "A new bearing fault detection method in induction machines based on Instantaneous Power Factor," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4252-4259, Dec. 2008.
11. K. S. Gaeid, H.W. Ping, M. K. Masood, and L. Szabó, "Survey of wavelet fault diagnosis and tolerant of induction machines with case study," Int. Rev. Elect. Eng., vol. 7, no. 3, pp. 4437-4457, May 2012.
12. E. Ayaz, A. Ozturk, and S. Seker, "Continuous wavelet transform for bearing damage detection in electric motors," in Proc. IEEE MELECON, Malaga, Spain, 2006, pp. 1130-1133.
13. M. D. Negrea, "Electromagnetic flux monitoring for detecting faults in electrical machines," Ph.D. dissertation, Dept. Elect. Commun. Eng., Helsinki Univ. Technol., Espoo, Finland, 2006.
14. J. Penman, H. G. Sedding, B. A. Lloyd, and W. T. Fink, "Detection and location of interturn short circuits in the stator windings of operating motors," IEEE Trans. Energy Convers., vol. 9, no. 4, pp. 652-658, Dec. 1994.
15. V. Kokko, "Condition monitoring of squirrel-cage motors by axial magnetic flux measurements," M.S. thesis, Dept. Elect. Eng., Optoelectron. Meas., Univ. Oulu, Oulu, Finland, 2006.
16. H. Henao, C. Demian, and G.-A. Capolino, "A frequency-domain detection of stator winding faults in induction machines using an external flux sensor," IEEE Trans. Ind. Appl., vol. 39, no. 5, pp. 1272-1279, Sep./Oct. 2003.
17. A. Bellini, S. Concari, G. Franceschini, C. Tassoni, and A. Toscani, "Vibrations, currents and stray flux signals to asses induction motor rotor condition," in Proc. IEEE IECON, Paris, France, 2006, pp. 4963-4968.
18. C. Concari, G. Franceschini, and C. Tassoni, "Differential diagnosis based on multivariable monitoring to assess induction machine rotor conditions," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4156-4166, Dec. 2008.
19. J. M. B. Siau, A. L. Graff, W. L. Soong, and N. Ertugrul, "Broken bar detection in induction motors using current and flux spectral analysis," Aust. J. Elect. Electron. Eng., vol. 1, pp. 171-178, 2004.
20. R. Romary, R. Corton, D. Thailly, and J. F. Brudny, "Induction machine fault diagnosis using an external radial flux sensor," Eur. Phys. J., Appl. Phys., vol. 32, no. 2, pp. 125-132, Nov. 2005.
21. A. Ceban, R. Pusca, and R. Romary, "Eccentricity and broken rotor bars faults-Effects on the external axial field," in Proc. IEEE ICEM, Rome, Italy, 2010, pp. 1-6.
22. O. Vitek, M. Janda, V. Hajek, and P. Bauer, "Detection of eccentricity and bearing faults using stray flux monitoring," in Proc. IEEE SDEMPED, Bologna, Italy, 2011, pp. 456-461.
23. A. Bellini, F. Filippetti, C. Tassoni, and G.-A. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
24. T. Boukra, A. Lebaroud, and G. Clerc, "Statistical and neural-network approaches for the classification of induction machine faults using the ambiguity plane representation," IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 4034-4042, Sep. 2013.
25. M. D. Prieto, G. Cirrincione, A. G. Espinosa, J. A. Ortega, and H. Henao, "Bearing fault detection by a novel condition-monitoring scheme based on statistical-time features and neural networks," IEEE Trans. Ind. Electron., vol. 60, no. 8, pp. 3398-3407, Aug. 2013.
26. R. J. Romero-Troncoso et al., "FPGA-based online detection of multiple combined faults in induction motors through information entropy and fuzzy inference," IEEE Trans. Ind. Electron., vol. 58, no. 11, pp. 5263- 5270, Nov. 2011.
27. R. Romary, C. Demian, P. Schlupp, and J.-Y. Roger, "Offline and online methods for stator core fault detection in large generators," IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 4084-4092, Sep. 2013.
28. C. H. De Angelo et al., "Online model-based stator-fault detection and identification in induction motors," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4671-4680, Nov. 2009.
29. W. T. Thomson, "A review of on-line condition monitoring techniques for three-phase squirrel-cage induction motors-Past present and future," in Proc. IEEE SDEMPED, Gijon, Spain, 1999, pp. 3-18.
30. H. Henao, G.-A. Capolino, and C. S. Martiş, "On the stray flux analysis for the detection of the three-phase induction machine faults," in Conf. Rec. 38th IEEE IAS Annu. Meeting, 2003, vol. 2, pp. 1368-1373.
31. A. Yazidi et al., "Detection of stator short-circuit in induction machines using an external leakage flux sensor," in Proc. IEEE ICIT, Hammamet, Tunisia, 2004, pp. 166-169.
32. A. Yazidi, H. Henao, and G.-A. Capolino, "Broken rotor bars fault detection in squirrel cage induction machines," in Proc. IEEE IEMDC, San Antonio, TX, USA, 2005, pp. 741-747.
33. S. H. Kia, H. Henao, G.-A. Capolino, and C. S. Martiş, "Induction machine broken bars fault detection using stray flux after supply disconnection," in Proc. IEEE IECON, Paris, France, 2006, pp. 1498-1503.
34. S. M. J. Rastegar Fatemi, H. Henao, and G.-A. Capolino, "Gearbox monitoring by using the stray flux in an induction machine based electromechanical system," in Proc. IEEE MELECON, Ajaccio, France, 2008, pp. 484-489.
35. M. Brela, N. Kassim, and J. Franke, "Characterization of magnetic actuators by measuring of magnetic stray fields with GMR-sensors," in Proc. 3rd Int. EDPC, Nuremberg, Germany, 2013, pp. 1-7.
36. R. R. Schoen, T. G. Habetler, F. Kamran, and R. G. Bartheld, "Motor bearing damage detection using stator current monitoring," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1274-1279, Nov./Dec. 1995.
37. L. Frosini and E. Bassi, "Stator current and motor efficiency as indicators for different types of bearing faults in induction motors," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 244-251, Jan. 2010.
38. L. Frosini, A. Borin, L. Girometta, and G. Venchi, "A novel approach to detect short circuits in low voltage induction motor by stray flux measurement," in Proc. IEEE ICEM, Marseille, France, 2012, pp. 1538-1544.
39. C. Harlişca, L. Szabó, L. Frosini, and A. Albini, "Diagnosis of rolling bearings faults in electric machines through stray magnetic flux monitoring," in Proc. Int. Symp. ATEE, Bucuręsti, Romania, 2013, pp. 1-6.
40. C. Harlişca, L. Szabó, L. Frosini, and A. Albini, "Bearing faults detection in induction machines based on statistical processing of the stray fluxes measurements," in Proc. IEEE SDEMPED, Valencia, Spain, 2013, pp. 371-376.
41. Model 343 Flux Coil-Product Data Sheet, Emerson Process Management, Knoxville, TN, USA, 2004.
42. L. Frosini, A. Borin, L. Girometta, and G. Venchi, "Development of a leakage flux measurement system for condition monitoring of electrical drives," in Proc. IEEE SDEMPED, Bologna, Italy, 2011, pp. 356-363.
43. L. Frosini, A. Borin, A. Albini, and F. Benzi, "New techniques to simulate and diagnose stator winding faults in low voltage induction motors," in Proc. IEEE ICEM, Marseille, France, 2012, pp. 1783-1789.
44. P. Ripka, Magnetic Sensors and Magnetometers. Boston, MA, USA: Artech House, 2001.