Bearing faults detection in induction machines based on statistical processing of the stray fluxes measurements

Proceedings - 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED 2013

Volumn , Issue , 2013, Pages 371-376

  Harlisca, Ciprian ^a   Szabo, Lorand ^a   Frosini, Lucia ^b   Albini, Andrea ^b  

^a TECHNICAL UNIVERSITY OF CLUJ NAPOCA   (Romania)

^b UNIVERSITY OF PAVIA   (Italy)

Author keywords

ac machines; ball bearings; electric machines; fault detection; fault diagnosis; induction motors; rotating machines

Indexed keywords

BALL BEARINGS; ELECTRIC FAULT CURRENTS; ELECTRIC MACHINERY; FAILURE ANALYSIS; FAULT DETECTION; INDUCTION MOTORS; INDUSTRIAL PLANTS; NONINVASIVE MEDICAL PROCEDURES; POWER ELECTRONICS; PROBES;

AC MACHINE; BEARING FAULT; FAULT DIAGNOSIS METHOD; INDUCTION MACHINES; NONINVASIVE METHODS; ROTATING MACHINE; STATISTICAL PROCESSING;

ELECTRIC DRIVES;

EID: 84891137945     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/DEMPED.2013.6645742     Document Type: Conference Paper

References (30)

1. W.T. Thomson, "A review of on-line condition monitoring techniques for three-phase squirrel-cage induction motors-Past present and future," in Proceedings of the IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED '99), Gijon (Spain), 1999, pp. 3-18.
2. M.E.H. Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Transactions on Industrial Electronics, vol. 47, pp. 984-993, 2000.
3. Motor Reliability Working Group, "Report of large motor reliability survey of industrial and commercial installations Part I and II," IEEE Transactions on Industry Applications, vol. IA21, pp. 853-872, 1985.
4. W. Saadaoui and K. Jelassi, "Induction motor bearing damage detection using stator current analysis," in Proceedings of the IEEE International Conference on Power Engineering, Energy and Electrical Drives (POWERENG '2011), Malaga (Spain), 2011.
5. A.A. Elfeky, M.I. Masoud, and I.F. El-Arabawy, "Fault signature production for rolling element bearings in induction motor," in Proceedings of the IEEE Conference on Compatibility in Power Electronics (CPE' 2007), Gdansk (Poland), 2007, pp. 1-5.
6. J. Antoni and R.B. Randall, "On the use of the cyclic power spectrum in rolling element bearings diagnostics," Journal of Sound and Vibration, vol. 281, pp. 463-468, 2005.
7. F. Immovilli, A. Bellini, R. Rubini, and C. Tassoni, "Diagnosis of bearing faults in induction machines by vibration or current signals: a critical comparison," IEEE Transactions on Industry Applications vol. 46, pp. 1350-1359, 2010.
8. R.R. Schoen, T.G. Habetler, F. Kamran, and R.G. Bartheld, "Motor bearing damage detection using stator current monitoring," IEEE Transactions on Industry Applications, vol. 31, pp. 1274-1279, 1995.
9. L. Frosini and E. Bassi, "Stator current and motor efficiency as indicators for different types of bearing faults in induction motors," IEEE Transactions on Industrial Electronics, vol. 57, pp. 244-251, 2010.
10. R.B. Randall and J. Antoni, "Rolling element bearing diagnostics-A tutorial," Mechanical Systems and Signal Processing, vol. 25, pp. 485-520, 2011.
11. D.G. Dorrell and W.T. Thomson, "Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors," IEEE Transactions on Industry Applications, vol. 33, pp. 24-34, 1997.
12. O. Vitek, M. Janda, V. Hajek, and P. Bauer, "Detection of eccentricity and bearing faults using stray flux monitoring," in Proceedings of the IEEE International Symposium on Diagnosis for Electrical Machines, Power Electronics &Drives (SDEMPED '2011), Bologna (Italy), 2011, pp. 456-461.
13. L. Frosini, A. Borin, L. Girometta, and G. Venchi, "Development of a leakage flux measurement system for condition monitoring of electrical drives," in Proceedings of the IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics &Drives (SDEMPED '2011), Bologna (Italy), 2011, pp. 356-363.
14. H. Henao, C. Demian, and G.A. Capolino, "A frequency-domain detection of stator winding faults in induction machines using an external flux sensor," IEEE Transactions on Industry Applications, vol. 39, pp. 1272-1279, 2003.
15. J. Penman, H.G. Sedding, B.A. Lloyd, and W.T. Fink, "Detection and location of interturn short circuits in the stator windings of operating motors," IEEE Transactions on Energy Conversion, vol. 9, pp. 652-658, 1994.
16. S.-B. Han, D.-H. Hwang, S.-H. Yi, and D.-S. Kang, "Development of diagnosis algorithm for induction motor using flux sensor," in Proceedings of the International Conference on Condition Monitoring and Diagnosis (CMD '2008), Beijing (China),, 2008, pp. 140-142.
17. A. Bellini, S. Concari, G. Franceschini, C. Tassoni, and A. Toscani, "Vibrations, currents and stray flux signals to asses induction motor rotor condition," in Proceedings of the 32nd IEEE Annual Conference on Industrial Electronics (IECON '2006), Paris (France), 2006, pp. 4963-4968.
18. H. Henao, T. Assaf, and G.A. Capolino, "Detection of voltage source dissymmetry in an induction motor using the measurement of axial leakage flux," in Conference Record of the International Conference on Electrical Machines (ICEM '2000) Espoo (Finland), 2000, pp. 1110-1114.
19. C. Harli?ca and L. Szabó, "Wavelet analysis and Park's Vector based condition monitoring of induction machines," Journal of Computer Science and Control Systems, vol. 4, pp. 35-38, 2011.
20. N. Mehala and R. Dahiya, "Detection of bearing faults of induction motor using Park's Vector Approach," International Journal of Engineering and Technology, vol. 2, pp. 263-266, 2010.
21. W.-Y. Chen, J.-X. Xu, and S.K. Panda, "Application of artificial intelligence techniques to the study of machine signatures," in Proceedings of the XX IEEE International Conference on Electrical Machines (ICEM' 2012), Marseille (France), 2012, pp. 2390-2396.
22. B.K.N. Rao, P. Pai Srinivasa, and T.N. Nagabhushana, "Failure diagnosis and prognosis of rolling-element bearings using Artificial Neural Networks: A critical overview," in Journal of Physics: Conference Series, 2012.
23. M.S. Ballal, Z.J. Khan, H.M. Suryawanshi, and R.L. Sonolikar, "Induction motor: fuzzy system for the detection of winding insulation condition and bearing wear," Electric Power Components and Systems, vol. 34, pp. 159-171, 2006.
24. K.C. Gryllias and I.A. Antoniadis, "A Support Vector Machine approach based on physical model training for rolling element bearing fault detection in industrial environments," Engineering Applications of Artificial Intelligence, vol. 25, pp. 326-344, 2011.
25. B. Samanta and C. Nataraj, "Use of particle swarm optimization for machinery fault detection," Engineering Applications of Artificial Intelligence, vol. 22, pp. 308-316, 2009.
26. D.-M. Yang, "The application of artificial neural networks to the diagnosis of induction motor bearing condition using Hilbert-based bispectral analysis," in Proceedings of the 5th IEEE Conference on Industrial Electronics and Applications (ICIEA '2010), Taichung (Taiwan), 2010, pp. 1730-1735.
27. K.S. Gaeid, H.W. Ping, M.K. Masood, and L. Szabó, "Survey of wavelet fault diagnosis and tolerant of induction machines with case study," International Review of Electrical Engineering (IREE), vol. 7, pp. 4437-4457, 2012.
28. E. Ayaz, A. Ozturk, and S. Seker, "Continuous Wavelet Transform for bearing damage detection in electric motors," in Proceedings of the IEEE Mediterranean Electrotechnical Conference (MELECON '2006), Malaga (Spain), 2006, pp. 1130-1133.
29. H. Henao, G.A. Capolino, and C.S. Mar?i?, "On the stray flux analysis for the detection of the three-phase induction machine faults," Conference Record of the IEEE Industry Applications Conference IAS '2003 (38th IAS Annual Meeting), vol. 2, pp. 1368-1373, 2003.
30. L. Frosini, A. Borin, L. Girometta, and G. Venchi, "A novel approach to detect short circuits in low voltage induction motor by stray flux measurement," in Proceedings of the XX IEEE International Conference on Electrical Machines (ICEM '2012), Marseille (France), 2012, pp. 1538-1544.