Models for bearing damage detection in induction motors using stator current monitoring

IEEE Transactions on Industrial Electronics

Volumn 55, Issue 4, 2008, Pages 1813-1822

  Blodt, Martin ^a,b   Granjon, Pierre ^c   Raison, Bertrand ^a   Rostaing, Gilles ^a  

^a LABORATOIRE D ELECTROTECHNIQUE DE GRENOBLE   (France)

^b SIEMENS AG   (Germany)

^c GIPSA LAB   (France)

Author keywords

Airgap eccentricity; Bearing damage detection; Induction motors; Motor current signature analysis; Spectral analysis

Indexed keywords

DAMAGE DETECTION; MATHEMATICAL MODELS; SPECTRUM ANALYSIS; STATORS; TORQUE MEASUREMENT; VIBRATION MEASUREMENT; VIBRATIONAL SPECTRA;

AIRGAP ECCENTRICITY; MOTOR CURRENT SIGNATURE ANALYSIS; ROLLING-ELEMENT BEARING FAULTS;

INDUCTION MOTORS;

EID: 42549113522     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2008.917108     Document Type: Article

References (33)

1. D. Basak, A. Tiwari, and S. P. Das, "Fault diagnosis and condition monitoring of electrical machines - A review," in Proc. IEEE ICIT Mumbai, India, Dec. 2006, pp. 3061-3066.
2. J. H. Jung, J. J. Lee, and B. H. Kwon, "Online diagnosis of induction motors using MCSA," IEEE Trans. Ind. Electron., vol. 53, no. 6, pp. 1842-1852, Dec. 2006.
3. S. Nandi and H. A. Toliyat, "Condition monitoring and fault diagnosis of electrical machines - A review," in Conf. Rec. IAS Annu. Meeting Phoenix, AZ, Oct. 1999, vol. 1, pp. 197-204.
4. M. E. H. Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 984-993, Oct. 2000.
5. M. E. H. Benbouzid and G. B. Kliman, "What stator current processing-based technique to use for induction motor rotor faults diagnosis?" IEEE Trans. Energy Convers., vol. 18, no. 2, pp. 238-244, Jun. 2003.
6. P. Vas, Parameter Estimation, Condition Monitoring and Diagnosis of Electrical Machines. Oxford, U.K.: Clarendon, 1993.
7. IEEE Motor Reliability Working Group, "Report of large motor reliability survey of industrial and commercial installations," IEEE Trans. Ind. Appl., vol. IA-21, no. 4, pp. 853-872, Jul. 1986.
8. R. R. Schoen, T. G. Habetler, F. Kamran, and R. Bartheld, "Motor bearing damage detection using stator current monitoring," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1274-1279, Nov./Dec. 1995.
9. L. Sun and B. Xu, "An improvement of stator current based detection of bearing fault in induction motors," in Conf. Rec. IAS Annu. Meeting Tampa, FL, Oct. 2007, pp. 2277-2281.
10. L. Eren, K. Teotrakool, and M. J. Devaney, "Bearing fault detection via wavelet packet decomposition with spectral post processing," in Proc. IEEE Instrum. Meas. Technol. Conf., Warsaw, Poland, May 2007, pp. 1-4.
11. A. Lebaroud and G. Clerc, "Time-frequency classification applied to induction machine faults monitoring," in Proc. 32nd Annu. Conf. IEEE IECON, Paris, France, Nov. 2006, pp. 5051-5056.
12. B. Yazici and G. B. Kliman, "An adaptive statistical time-frequency method for detection of broken bars and bearing faults in motors using stator current," IEEE Trans. Ind. Appl., vol. 35, no. 2, pp. 442-452, Mar./Apr. 1999.
13. M. Blödt, P. Granjon, B. Raison, and G. Rostaing, "Models for bearing damage detection in induction motors using stator current monitoring," in Proc. IEEE ISIE, Ajaccio, France, May 2004, pp. 383-388.
14. N. Tandon and A. Choudhury, "An analytical model for the prediction of the vibration response of rolling element bearings due to a localized defect," J. Sound Vib., vol. 205, no. 3, pp. 275-292, Aug. 1997.
15. J. Stack, T. G. Habetler, and R. G. Harley, "Fault classification and fault signature production for rolling element bearings in electric machines," IEEE Trans. Ind. Appl., vol. 40, no. 3, pp. 735-739, May/Jun. 2004.
16. B. Li, M. Chow, Y. Tipsuwan, and J. Hung, "Neural-network-based motor rolling bearing fault diagnosis," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1060-1069, Oct. 2000.
17. R. L. Schiltz, "Forcing frequency identification of rolling element bearings," Sound Vib., vol. 24, no. 5, pp. 16-19, May 1990.
18. P. D. MacFadden and J. D. Smith, "Model for the vibration produced by a single point defect in a rolling element bearing," J. Sound Vib., vol. 96, no. 1, pp. 69-82, Sep. 1984.
19. Y. F. Wang and P. J. Kootsookos, "Modeling of low shaft speed bearing faults for condition monitoring," Mech. Syst. Signal Process., vol. 12, no. 3, pp. 415-426, May 1998.
20. J. Stack, T. G. Habetler, and R. G. Harley, "Bearing fault detection via autoregressive stator current modeling," IEEE Trans. Ind. Appl. vol. 40, no. 3, pp. 740-747, May/Jun. 2004.
21. L. Eren, A. Karahoca, and M. J. Devaney, "Neural network based motor bearing fault detection," in Proc. IMTC, Como, Italy, May 2004, vol. 3, pp. 1657-1660.
22. J. R. Cameron and W. T. Thomson, "Vibration and current monitoring for detecting airgap eccentricity in large induction motors," Proc. Inst. Electr. Eng., vol. 133, no. 3, pp. 155-163, May 1986.
23. D. G. Dorrell, W. T. Thomson, and S. Roach, "Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamic airgap eccentricity in 3-phase induction motors," IEEE Trans. Ind. Appl., vol. 33, no. 1, pp. 24-34, Jan./Feb. 1997.
24. S. Nandi, S. Ahmed, and H. A. Toliyat, "Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages," IEEE Trans. Energy Convers., vol. 16, no. 3, pp. 253-260, Sep. 2001.
25. H. Guldemir, "Detection of airgap eccentricity using line current spectrum of induction motors," Electr. Power Syst. Res., vol. 64, no. 2, pp. 109-117, Feb. 2003.
26. J. Max and J.-L. Lacoume, Méthodes et Techniques de Traitement du Signal, 5th ed. Paris, France: Dunod, 2000.
27. G. Salles, F. Filippetti, C. Tassoni, G. Grellet, and G. Franceschini, "Monitoring of induction motor load by neural network techniques," IEEE Trans. Power Electron., vol. 15, no. 4, pp. 762-768, Jul. 2000.
28. S. F. Legowski, A. H. M. S. Ula, and A. M. Trzynadlowski, "Instantaneous power as a medium for the signature analysis of induction motors," IEEE Trans. Ind. Appl., vol. 32, no. 4, pp. 904-909, Jul./Aug. 1996.
29. B. Boashash, "Estimating and interpreting the instantaneous frequency of a signal - Part 1: Fundamentals," Proc. IEEE, vol. 80, no. 4, pp. 520-538, Apr. 1992.
30. A. B. Carlson, Communication Systems: An Introduction to Signals and Noise in Electrical Communication, 3rd ed. New York: McGraw-Hill, 1986.
31. E. L. Bonaldi, L. E. B. da Silva, G. Lambert-Torres, L. E. L. Oliveira, and F. O. Assuncao, "Using rough sets techniques as a fault diagnosis classifier for induction motors," in Proc. IEEE IECON, Sevilla, Spain, Nov. 2002, vol. 4, pp. 3383-3388.
32. P. Flandrin, Time-Frequency/Time-Scale Analysis. San Diego, CA: Academic, 1999.
33. F. Auger, P. Flandrin, P. Gonçalvès, and O. Lemoine, Time-Frequency Toolbox. France: CNRS/Rice Univ., 1995-1996. [Online]. Available: Http://tftb.nongnu.org