Corrigendum to “TiO2 nanotube coating on stainless steel 304 for biomedical applications” [Ceram. Int. 41 (2015) 2785–2793] (S0272884214016459) (10.1016/j.ceramint.2014.10.098));TiO2 nanotube coating on stainless steel 304 for biomedical applications

Ceramics International

Volumn 41, Issue 2, 2015, Pages 2785-2793

  Zalnezhad, E ^a   Hamouda, A M S ^b   Faraji, G ^c   Shamshirband, S ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b Qatar University   (Qatar)

^c UNIVERSITY OF TEHRAN   (Iran)

Author keywords

Adhesion; Biomedical; PVD magnetron sputtering; TiO2 Nanotube

Indexed keywords

ADHESION; BOND STRENGTH (MATERIALS); COATINGS; ELASTIC MODULI; ELECTROLYTES; ETHYLENE; ETHYLENE GLYCOL; FLUORINE COMPOUNDS; MAGNETRON SPUTTERING; MEDICAL APPLICATIONS; NANOTUBES; PHYSICAL VAPOR DEPOSITION; SUBSTRATES; TITANIUM DIOXIDE; YARN;

ANNEALING TEMPERATURES; ANODIZATION TECHNIQUES; BIOMEDICAL; BIOMEDICAL APPLICATIONS; FLUORIDE ELECTROLYTE; PVD MAGNETRON; TIO2 NANOTUBE ARRAYS; TIO2 NANOTUBES;

AUSTENITIC STAINLESS STEEL;

EID: 84919460271     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2015.07.022     Document Type: Erratum

References (44)

1. C.Y. Cui, X.G. Cui, Y.K. Zhang, Q. Zhao, J.Z. Lu, J.D. Hu, and Y.M. Wang Microstructure and corrosion behavior of the AISI 304 stainless steel after Nd:YAG pulsed laser surface melting Surf. Coat. Technol 206 2011 1146 1154
2. T. Fu, Z.F. Zhou, Y.M. Zhou, X.D. Zhu, Q.F. Zeng, C.P. Wang, K.Y. Li, and J. Lu Mechanical properties of DLC coating sputter deposited on surface nanocrystallized 304 stainless steel Surf. Coat. Technol 207 2012 555 564
3. P.R.G. Gonçalves, J.H.G. Rangel, M.M. Oliveira, A.P. Maciel, and E. Longo Sn(1-x)LaxO2 thin films deposited on AISI 304 stainless steel substrates Ceram. Int. 40 2014 12359 12366
4. C.C. Chen, W.D. Jheng, and C.K. Lin Large-area TiO2 nanotube dye-sensitized solar cells using thermal-sprayed Ti layers on stainless steel Ceram. Int. 40 2014 3221 3226
5. S. Baradaran, W.J. Basirun, E. Zalnezhad, M. Hamdi, Ahmed A.D. Sarhan, and Y. Alias Fabrication and deformation behaviour of multilayer Al2O3/ Ti/TiO2 nanotube arrays J. Mech. Behav. Biomed. Mater. 20 2013 272 282
6. E. Zalnezhad, S. Baradaran, A.R. Bushroa, and Ahmed A.D. Sarhan Mechanical property enhancement of Ti-6Al-4V by multilayer thin solid film Ti/TiO2 nanotubular array coating for biomedical application Metallur. Mater. Trans. A 45 2014 785 797
7. K. Thanigaiarul, K. Elayaraja, P. Magudapathy, U. Kamachi Mudali, K.G.M. Nair, M. Sudarshan, J.B.M. Krishna, A. Chakraborty, and S. Narayana Kalkura Surface modification of nanocrystalline calcium phosphate bioceramic by low energy nitrogen ion implantation Ceram. Int. 39 2013 3027 3034
8. V. Nelea, H. Pelletier, P. Mille, and D. Muller High-energy ion beam implantation of hydroxyapatite thin films grown on TiN and ZrO2 inter-layers by pulsed laser deposition Thin Solid Films 453-454 2004 208 214 (1 April)
9. E.G. Koleva, G.M. Mladenov, D.N. Trushnikov, and V.Y. Belenkiy Signal emitted from plasma during electron-beam welding with deflection oscillations of the beam J. Mater. Proc. Tech 214 2014 1812 1819
10. M.M. Pariona, V. Teleginski, K.D. Santos, S. Machado, A.J. Zara, N.K. Zurba, and R. Riva Yb-fiber laser beam effects on the surface modification of Al-Fe aerospace alloy obtaining weld filet structures, low fine porosity and corrosion resistance Surf. Coat. Technol 206 2012 2293 2301
11. M. Khan, M. Islam, A. Akram, Z. Qi, and L. Li Residual strain and electrical resistivity dependence of molybdenum films on DC plasma magnetron sputtering conditions Mat. Sci. Semicon. Proc 27 2014 343 351
12. E. Zalnezhad, Ahmed A.D. Sarhan, and M. Hamdi A fuzzy logic based model to predict surface hardness of thin film TiN coating on aerospace AL7075-T6 alloy Int. J. Adv. Manuf. Technol. 68 2013 415 423
13. M.S. Kang, Tie-gang Wang, J.H. Shin, R. Nowak, and K.H. Kim Synthesis and properties of Cr-Al-Si-N films deposited by hybrid coating system with high power impulse magnetron sputtering(HIPIMS) and DC pulse sputtering T. Nonferr. Metal. Soc 22 2012 729 734
14. X. Tang, F. Luo, F. Ou, W. Zhou, D. Zhu, and Z. Huang Effects of negative substrate bias voltage on the structure and properties of aluminum oxide films prepared by DC reactivemagnetron sputtering Appl. Surf. Sci. 259 2012 448 453
15. S. Chinsakolthanakorn, A. Buranawong, N. Witit-anun, S. Chaiyakun, and P. Limsuwan Characterization of Nanostructured TiZrN thin films deposited by reactive DC magnetron co-sputtering Procedia Eng. 32 2012 571 576
16. E. Zalnezhad, Ahmed A.D. Sarhan, and M. Hamdi Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process 559 2013 436 446
17. M. Mehrali, F.S. Shirazi, M. Mehrali, H.S.C. Metselaar, N.A.B. Kadri, and N.A.A. Osman Dental implants from functionally graded materials J. Biomed. Mater. Res. A 101 2013 3046 3057
18. A. Hee, I. Metselaar, M. Johan, and M. Mehrali Preparation of nickel zinc ferrite by electrophoretic deposition J. Electrochem. Soc. 159 2012 18 22
19. J.M. Macak, H. Hildebrand, U. Marten-Jahns, and P. Schmuki Mechanistic aspects and growth of large diameter self-organized TiO2 nanotubes J. Electroanal. Chem. 621 2008 254 266
20. 2 layers and their photocatalytic activities J. Alloy. Compd 604 2014 66 72
21. 2 nanotubes fabricated with anodization process Appl. Surf. Sci. 307 2014 407 413
22. E. Mohseni, E. Zalnezhad, and A.R. Bushroa Comparative investigation on the adhesion of hydroxyapatite coating on Ti-6Al-4V implant: A review paper Int. J. Adhesion & Adhes. 48 2014 238 257
23. J. Zhao, X. Wang, T. Sun, and L. Li In situ templated synthesis of anatase single-crystal nanotube arrays Nanotechnol 16 2005 2450 2454
24. O.K. Varghese, D. Gong, M. Paulose, K.G. Ong, C.A. Grimes, and E.C. Dickey Crystallization and high-temperature structural stability of titanium oxide nanotube arrays J. Mater. Res. 18 2003 156 165
25. W. Li, C. Ni, H. Lin, C.P. Huang, and S.I. Shah Size dependence of thermal stability of TiO2 nanoparticles J. Appl. Phys. 96 2004 6663 6668
26. 2 nanotube arrays: Fabrication, material properties, and solar energy applications Sol. Energy Mater. Sol. Cells 90 2006 2011 2075
27. Q. Cai, M. Paulose, O.K. Varghese, and C.A. Grimes. The effect of electrolyte composition on the fabrication of self-organized titanium oxide nanotube arrays by anodic oxidation J. Mater. Res. 20 2005 230 236
28. G.B. de Souza, C.M. Lepienski, C.E. Foerster, N.K. Kuromoto, P. Soares, and H.A. Ponte Nanomechanical and nanotribological properties of bioactive titanium surfaces prepared by alkali treatment J. Mech. Behav. Biomed. Mater. 4 2011 756 765
29. G. Crawford, N. Chawla, K. Das, S. Bose, and A. Bandyopadhyay Microstructure and deformation behavior of biocompatible TiO2 nanotubes on titanium substrate Acta. Biomater. 3 2007 359 367
30. T. Shokuhfar, G.K. Arumugam, P.A. Heiden, R.S. Yassar, and C. Friedrich Direct compressive measurements of individual titanium dioxide nanotubes ACS. Nano 3 2009 3098 3102
31. M.R. VanLandingham Review of instrumented indentation J. Res. Natl. Inst. Stand. Technol. 108 2003 249 265
32. W. Zhang, G.Z. Li, Y.N. Li, Z.T. Yu, and Z.P. Xi Fabrication of TiO2 nanotube arrays on biologic titanium alloy and properties Trans. Nonferrous Met. Soc. China 17 2007 692 695
33. Z. Hashin, and B.W. Rosen The elastic moduli of fiber-reinforced materials J. Appl. Mech. 31 1964 383 396
34. Y. Al-Khatatbeh, K.K.M. Lee, and B. Kiefer J. Phys. Chem. C. Compressibility of Nanocrystalline TiO2 Anatase 116 2012 21635 21639
35. G. Crawford, N. Chawla, and J. Houston Nanomechanicsof biocompatible TiO2 nanotubes by interfacial force microscopy (IFM) J. Mech. Behav. Biomed. Mater. 2 2009 580 587
36. R.L. Penn, and J.F. Banfield Formation of rutile nuclei at anatase {112} twin interfaces and the phase transformation in nanocrystalline titania Am. Mineral. 84 1999 871 876
37. P.I. Gouma, and M.J. Mills Anatase to rutile transformation in titania powders J. Am. Ceram. Soc. 84 2001 619 622
38. P.A. Cox Transition Metal Oxides: An Introduction to their Electronic Structure and Properties 1992 Clarendon Press Oxford
39. K.H. Harold Transition Metal Oxides: Surface Chemistry and Catalysis 1989 Elsevier Oxford
40. M. Batzill, E.H. Morales, and U. Diebold Influence of nitrogen doping on the defect formation and surface properties of TiO2 rutile and anatase Phys. Rev. Lett. 96 2006 26103
41. 2 J. Chem. Soc. Faraday. Trans. 79 1983 2765 2771
42. Dorian A.H. Hanaor, and Charles C. Sorrell Review of the anatase to rutile phase transformation J. Mater Sci. 46 2011 855 874
43. 2 nanotubular array coating on Ti-6Al-4V. Surf. Coat. Technol. doi:10.1016/j.surfcoat.2014.07.046.
44. T. Sultana, G.L. Georgiev, R.J. Baird, G.W. Auner, G. Newaz, R. Patwa, and H.J. Herfurth Study of two different thin film coating methods in transmission laser micro-joining of thin Ti-film coated glass and polyimide for biomedical applications J. Mech. Behav. Biomed. 2 2009 237