Study of two different thin film coating methods in transmission laser micro-joining of thin Ti-film coated glass and polyimide for biomedical applications

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 2, Issue 3, 2009, Pages 237-242

  Sultana, T ^a,b   Georgiev, G L ^a,b   Baird, R J ^a   Auner, G W ^a,b   Newaz, G ^a,b   Patwa, R ^c   Herfurth, H J ^c  

^a WAYNE STATE UNIVERSITY   (United States)

^b Wayne State University   (United States)

^c Fraunhofer Center for Laser Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIC-FORCE MICROSCOPIES; BIO-MEDICAL APPLICATIONS; BIO-MEDICAL DEVICES; CATHODIC ARC PHYSICAL VAPOR DEPOSITIONS; COATED GLASS; COATING METHODS; DE COHESIONS; ELECTRON BEAM EVAPORATIONS; FILM DEPOSITION RATES; FILM PROPERTIES; GLASS WAFERS; HERMETIC SEALING; HOT-SPOTS; JOINING PROCESS; JOINT QUALITIES; JOINT STRENGTHS; LAP SHEAR TESTS; LAP SHEARS; LASER BONDINGS; LASER JOINTS; LOW POWER LASERS; LOW-POWER; POLY-IMIDE FILMS; PVD FILMS; ROBUST PERFORMANCE; SEM; STICKING COEFFICIENTS; THIN METAL FILMS; THIN-FILM COATINGS; TI FILMS; TRANSMISSION LASER MICRO-JOINING; WAVE LENGTHS;

ADHESION; ATOMIC FORCE MICROSCOPY; BONDING; BOROSILICATE GLASS; COUPLING AGENTS; ELECTRON BEAMS; FAILURE ANALYSIS; FIBER LASERS; JOINING; LASERS; OPTICAL MICROSCOPY; PHYSICAL VAPOR DEPOSITION; POLYIMIDES; POLYMERS; SCANNING ELECTRON MICROSCOPY; VAPORS;

TITANIUM;

BORON; BOROSILICATE; GLASS; POLYIMIDE; SILICATE; TITANIUM; UNCLASSIFIED DRUG;

ARTICLE; ATOMIC FORCE MICROSCOPY; CATHODIC ARC PHYSICAL VAPOR DEPOSITION; ELECTRON BEAM EVAPORATION; EVAPORATION; INTERMETHOD COMPARISON; LASER; MATERIAL COATING; NONHUMAN; PRIORITY JOURNAL; PROCESS MODEL; QUALITY CONTROL; SCANNING ELECTRON MICROSCOPY; THIN FILM COATING METHOD; WAVEFORM;

BIOTECHNOLOGY; EQUIPMENT FAILURE ANALYSIS; GLASS; LASERS; MICROSCOPY, ELECTRON, SCANNING; MINIATURIZATION; RESINS, SYNTHETIC; SHEAR STRENGTH; TITANIUM;

EID: 61449228469     PISSN: 17516161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2008.07.004     Document Type: Article

References (26)

1. Bauer, I., Russek, U.A., Herfurth, H., Witte, R., Heinemann, S., Newaz, G., Mian, A., Georgiev, D., Auner, G., 2004. Laser micro-joining of dissimilar and biocompatible materials. In: Proceedings of SPIE - Photonics 2004, vol Lasers and Applications in Science and Engineering, pp. 454
2. Boglea A., Olowinsky A., and Gillner A. Fibre laser welding for packaging of disposable polymeric microfluidic-biochips. Applied Surface Science 254 (2007) 1174
3. Cai K., Muller M., Bossert J., Rechtenbach A., and Jandt K.D. Surface structure and composition of flat titanium thin films as a function of film thickness and evaporation rate. Applied Surface Science 250 (2005) 252-267
4. deCharms R.C., Blake D.T., and Merzenich M.M. A multielectrode implant device for the cerebral cortex. Journal of Neuroscience Methods 93 (1999) 27-35
5. Doerner M.F., and Nix W.D. Stresses and deformation processes in thin films on substrates. Critical Reviews in Solid State and Materials Sciences 14 (1988) 225-268
6. Georgiev D.G., Baird R.J., Newaz G., Auner G., Witte R., and Herfurth H. An xps study of laser-fabricated polyimide/titanium interfaces. Applied Surface Science 236 (2004) 71-76
7. Georgiev D., Sultana T., Mian A., Auner G., Witte R., Herfurth H., and Newaz G. Laser fabrication and characterization of sub-millimeter joints between polyimide and ti-coated borosilicate glass. Journal of Materials Science 40 (2005) 5641-5647
8. Gilleo, Ken, 2001. Overview of new packages, materials and processes. In: International Symposium on Advanced Packaging Materials, IMAPS, pp. 1-5
9. Gillner A., Bremus-Koebberling E.A., Wehner M., Russek U., and Berden T. Laser processing of components for polymer microfluidic and optoelectronic products. Proceedings of SPIE vol. 4274(laser) (2001), The international society for optical engineering 411-419
10. Gonzalez E.J., Bonevich J.E., Stafford G.R., White G., and Josell D. Thermal transport through thin films: Mirage technique measurements on aluminum/titanium multilayers. Journal of Material Research 15 (2000) 764-771
11. Grigorian, Ani, 2007. Metalworking: Making the cuts of tomorrow, today. Medical device linkcom
12. Lee K., He J., Singh A., Massia S., Ehteshami G., Kim B., and Raupp G. Polyimide-based intracortical neural implant with improved structural stiffness. Journal of Micromechanics and Microengineering 14 (2004) 32-37
13. Lu M., Qian Z., Ren W., Liu S., and Shangguan D. Investigation of electronic packaging materials by using a 6-axis mini thermomechanical tester. International Journal of Solids and Structures 36 (1999) 65-78
14. Metz S., Holzer R., and Renaud P. Polyimide-based microfluidic devices. Lab on a Chip 1 (2001) 29-34
15. Mian A., Newaz G., Georgiev D., Rahman N., Vendra J., Auner G., Witte R., and Herfurth H. Performance of laser bonded glass/polyimide microjoints in cerebrospinal fluid. Journal of Materials Science: Materials in Medicine 18 (2007) 417-427
16. Mian A., Newaz G., Vendra J., Rahman N., Georgiev D., Auner G., Witte R., and Herfurth H. Laser bonded microjoints between titanium and polyimide for applications in medical implants. Journal of Materials Science: Materials in Medicine 16 (2005) 229-237
17. Monteiro Othon R. Thin film synthesis by energetic condensation. Annual Review of Materials Research 31 (2001) 111-137
18. Newaz G., Georgiev D.G., Mian A., Auner G., Herfurth H., and Witte R. Laser fabrication and characterization of adhesive-free joints for encapsulation of biomedical implant devices. Nanoscale Materials Science in Biology and Medicine. Materials Research Society Symposium Proceedings vol. 845 (2005) 267-272
19. Newaz G., Mian A., Sultana T., Mahmood T., Georgiev D., Witte R., Herfurth H., and Auner G. A comparison between glass/polyimide and titanium/polyimide microjoint performances in cerebrospinal fluid. Journal of Biomedical Materials Research A 79A (2006) 159-165
20. Nicholls J.R., Lawson K.J., Johnstone A., and Rickerby D.S. Methods to reduce the thermal conductivity of eb-pvd tbcs. Surface and Coatings Technology (2002) 151-152 383-391
21. Packham D.E. Surface energy, surface topography and adhesion. International Journal of Adhesion & Adhesives 23 (2003) 437-448
22. PalDey S., and Deevi S.C. Single layer and multilayer wear resistant coatings of (ti,al) n: A review. Materials Science and Engineering A 342 (2003) 58-79
23. Ramos M.M.D. Theoretical study of metal-polyimide interfacial properties. Vacuum 64 (2002) 255-260
24. Renteria A.F., Saruhan B., Ilavsky J., and Allen A.J. Application of usaxs analysis and non-interacting approximation to determine the influence of process parameters and ageing on the thermal conductivity of electron-beam physical vapor deposited thermal barrier coatings. Surface and Coatings Technology 201 (2007) 4781-4788
25. Savaloni H., Reissi M.H., Shariati M., and Player M.A. Nano-structural characteristics of ti/glass and ti/mo films as a function of deposition rate and angle of incidence. Thin Solid Films 515 (2006) 439-443
26. Wise, K.D., Anderson, D.J., Hetke, J.F., Kipke, D.R., Najafi, K., 2004. Wireless implantable microsystems: High-density electronic interfaces to the nervous system. In: Proceedings of the IEEE, pp. 76-97