Improved space survivability of polyhedral oligomeric silsesquioxane (POSS) polyimides fabricated via novel POSS-diamine

Corrosion Science

Volumn 90, Issue , 2015, Pages 223-238

  Lei, Xing Feng ^a   Qiao, Ming Tao ^a   Tian, Li Dong ^a   Yao, Pan ^a   Ma, Yong ^a   Zhang, He Peng ^a   Zhang, Qiu Yu ^a  

^a NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

Author keywords

A. Polymer; B. Weight loss; B. XPS; C. Interfaces; C. Oxidation

Indexed keywords

POLYHEDRAL OLIGOMERIC SILSESQUIOXANES; WEIGHT LOSS;

EID: 84914094580     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2014.10.013     Document Type: Article

References (65)

1. Dan Z., Takigawa S., Muto I., Hara N. Applicability of constant dew point corrosion tests for evaluating atmospheric corrosion of aluminium alloys. Corros. Sci. 2011, 53:2006-2014.
2. Dan Z., Muto I., Hara N. Effects of environmental factors on atmospheric corrosion of aluminium and its alloys under constant dew point conditions. Corros. Sci. 2012, 57:22-29.
3. Liang B., Wang G., Zhang B., Zhang X. Corrosion resistance of Al-Cu-Fe alloy powder coated with silica using an ultrasound-assisted sol-gel method. Corros. Sci. 2013, 73:292-299.
4. Finšgar M. 2-Mercaptobenzimidazole as a copper corrosion inhibitor: Part I. Long-term immersion, 3D-profilometry, and electrochemistry. Corros. Sci. 2013, 72:82-89.
5. Bellucci F., Nicodemo L., Monetta T., Kloppers M.J., Latanision R.M. A study of corrosion initiation on polyimide coatings. Corros. Sci. 1992, 33:1203-1226.
6. Wu G., Zhang X., Zhao Y., Ibrahim J.M., Yuan G., Chu P.K. Plasma modified Mg-Nd-Zn-Zr alloy with enhanced surface corrosion resistance. Corros. Sci. 2014, 78:121-129.
7. Wang P., Zhang D., Qiu R., Wu J. Super-hydrophobic metal-complex film fabricated electrochemically on copper as a barrier to corrosive medium. Corros. Sci. 2014, 83:317-326.
8. Wang P., Zhang D., Lu Z. Advantage of super-hydrophobic surface as a barrier against atmospheric corrosion induced by salt deliquescence. Corros. Sci. 2015, 90:23-32.
9. Minton T.K., Wright M.E., Tomczak S.J., Marquez S.A., Shen L.H., Brunsvold A.L., Cooper R., Zhang J.M., Vij V., Guenthner A.J., Petteys B.J. Atomic oxygen effects on POSS polyimides in low earth orbit. ACS Appl. Mater. Interfaces 2012, 4:492-502.
10. Minton T.K., Wu B., Zhang J., Lindholm N.F., Abdulagatov A.I., O'Patchen J., George S.M., Groner M.D. Protecting polymers in space with atomic layer deposition coatings. ACS Appl. Mater. Interfaces 2010, 2:2515-2520.
11. Tagawa M., Yokota K., Kishida K., Okamoto A., Minton T.K. Energy dependence of hyperthermal oxygen atom erosion of a fluorocarbon polymer: relevance to space environmental effects. ACS Appl. Mater. Interfaces 2010, 2:1866-1871.
12. Shpilman Z., Gouzman I., Grossman E., Shen L., Minton T.K., Paci J.T., Schatz G.C., Akhvlediani R., Hoffman A. Oxidation and etching of CVD diamond by thermal and hyperthermal atomic oxygen. J. Phys. Chem. C 2010, 114:18996-19003.
13. Miyazaki E., Tagawa M., Yokota K., Yokota R., Kimoto Y., Ishizawa J. Investigation into tolerance of polysiloxane-block-polyimide film against atomic oxygen. Acta Astronaut. 2010, 66:922-928.
14. Verker R., Grossman E., Eliaz N. Erosion of POSS-polyimide films under hypervelocity impact and atomic oxygen: the role of mechanical properties at elevated temperatures. Acta. Mater. 2009, 57:1112-1119.
15. He L., Wagner S.R., Illingsworth M.L. Homogeneous polyimide films with increased Bis(N,N'-disalicylidene-1,2-phenylenediaminato) Zirconium (IV) content. Chem. Mater. 1997, 9:3005-3011.
16. Connell J.W., Smith J.G., Hergenrother P.M. Oxygen plasma-resistant phenylphosphine oxide-containing polyimides and poly(arylene ether heterocycle)s: 1. Polymer 1995, 36:5-11.
17. Connell J.W., Smith J.G., Hedrick J.L. Oxygen plasma-resistant phenylphosphine oxide-containing polyimides and poly(arylene ether heterocycle)s: 2. Polymer 1995, 36:13-19.
18. Watson K.A., Palmieri F.L., Connell J.W. Space environmentally stable polyimides and copolyimides derived from [2,4-Bis(3-aminophenoxy)phenyl]diphenylphosphine oxide. Macromolecules 2002, 35:4968-4974.
19. Brunsvold A.L., Minton T.K., Gouzman I., Grossman E., Gonzalez R. An investigation of the resistance of polyhedral oligomeric silsesquioxane polyimide to atomic-oxygen attack. High Perform. Polym. 2004, 16:303-318.
20. 2/phosphate duplex system for polyimide matrix composites fabricated via a combined sol-gel/sealing treatment process. Corros. Sci. 2013, 74:22-34.
21. 2, or Ar on FEP teflon surfaces. ACS Appl. Mater. Interfaces 2009, 1:187-196.
22. Zhang J.M., Lindholm N.F., Brunsvold A.L., Upadhyaya H.P., Minton T.K. Erosion of FEP teflon and PMMA by VUV Radiation and hyperthermal O or Ar atoms. ACS Appl. Mater. Interfaces 2009, 1:653-660.
23. Yokota K., Ohmae N., Tagawa M. Effect of relative intensity of 5eV atomic oxygen and 172nm vacuum ultraviolet in the synergism of polyimide erosion. High Perform. Polym. 2004, 16:221-234.
24. Xiao F., Wang K., Zhan M.S. Atomic oxygen resistant phosphorus-containing polyimides for LEO environment. J. Mater. Sci. 2012, 47:4904-4913.
25. Devapal D., Packirisamy S., Reghunadhan Nair C.P., Ninan K.N. Phosphazene-based polymers as atomic oxygen resistant materials. J. Mater. Sci. 2006, 41:5764-5766.
26. Köytepe S., Paşahan A., Ekinci E., Alici B., Seçkin T. Synthesis, characterization of phosphine oxide-containing polyimides and their use as selective membrane for dopamine. J. Polym. Res. 2008, 15:249-257.
27. Zhang X.W., Ren H.Y., Wang J.H., Zhang Y., Shao Y.Y. (3-Glycidoxypropyl)-terminated silsesquioxane impact on nanomechanical properties of polyimide coatings exposed to atomic oxygen. Mater. Lett. 2011, 65:821-824.
28. Yokota K., Abe S., Tagawa M., Iwata M., Miyazaki E., Ishizawa J.I., Kimoto Y., Yokota R. Degradation property of commercially available Si-containing polyimide in simulated atomic oxygen environments for low earth orbit. High Perform. Polym. 2010, 22:237-251.
29. Tanaka K., Chujo Y. Advanced functional materials based on polyhedral oligomeric silsesquioxane (POSS). J. Mater. Chem. 2012, 22:1733-1746.
30. Leu C.M., Chang Y.T., Wei K.H. Synthesis and dielectric properties of polyimide-tethered polyhedral oligomeric silsesquioxane (POSS) nanocomposites via POSS-diamine. Macromolecules 2003, 36:9122-9127.
31. Nair B.P., Pavithran C. Bifunctionalized hybrid silica spheres by hydrolytic cocondensation of 3-aminopropyltriethoxysilane and vinyltriethoxysilane. Langmuir 2010, 26:730-735.
32. Laine R.M., Roll M.F. Polyhedral phenylsilsesquioxanes. Macromolecules 2011, 44:1073-1109.
33. Tamaki R., Tanaka Y., Asuncion M.Z., Choi J., Laine R.M. Octa(aminophenyl)silsesquioxane as a nanoconstruction site. J. Am. Chem. Soc. 2001, 123:12416-12417.
34. Mori H., Miyamura Y., Endo T. Synthesis and characterization of water-soluble silsesquioxane-based nanoparticles by hydrolytic condensation of triethoxysilane derived from 2-hydroxyethyl acrylate. Langmuir 2007, 23:9014-9023.
35. Zhang W., Müller A.H.E. Synthesis of tadpole-shaped POSS-containing hybrid polymers via "click chemistry". Polymer 2010, 51:2133-2139.
36. Luo A., Jiang X.S., Lin H., Yin J. "Thiol-ene" photo-cured hybrid materials based on POSS and renewable vegetable oil. J. Mater. Chem. 2011, 21:12753-12760.
37. Lin H., Wan X., Jiang X.S. A nanoimprint lithography hybrid photoresist based on the thiol-ene system. Adv. Funct. Mater. 2011, 21:2960-2967.
38. Gonzalez R.I., Phillips S.H., Hoflund G.B. In situ oxygen-atom erosion study of polyhedral oligomeric silsesquioxane-siloxane copolymer. J. Spacecr. Rockets 2000, 37:463-467.
39. Wright M., Schorzman D.A., Feher F.J., Jin R.Z. Synthesis and thermal curing of aryl-ethynyl-terminated coPOSS imide oligomers: new inorganic/organic hybrid resins. Chem. Mater. 2003, 15:264-268.
40. Feher F.J., Wyndham K.D. Amine and ester-substituted silsesquioxanes: synthesis, characterization and use as a core for starburst dendrimers. Chem. Commun. 1998, 323-324.
41. Tamaki R., Choi J., Laine R.M. A polyimide nanocomposite from octa(aminophenyl)silsesquioxane. Chem. Mater. 2003, 15:793-797.
42. Choi J., Tamaki R., Kim S.G., Laine R.M. Organic/inorganic imide nanocomposites from aminophenylsilsesquioxanes. Chem. Mater. 2003, 15:3365-3375.
43. Lei X.F., Chen Y., Zhang H.P., Li X.J., Yao P., Sun W.L., Zhang Q.Y. Space survivable polyimides with excellent optical transparency and self-healing properties derived from hyperbranched polysiloxane. ACS Appl. Mater. Interfaces 2013, 5:10207-10220.
44. Lei X.F., Yao P., Qiao M.T., Sun W.L., Zhang H.P., Zhang Q.Y. Atomic oxygen resistance of polyimide/silicon hybrid thin films with different compositions and architectures. High Perform. Polym. 2014, 10.1177/0954008314528011.
45. Carniato F., Boccaleri E., Marchese L. A versatile route to bifunctionalized silsesquioxane (POSS): synthesis and characterisation of Ti-containing aminopropylisobutyl-POSS. Dalton Trans. 2008, 36-39.
46. Olivero F., Renò F., Carniato F., Rizzi M., Cannas M., Marchese L. A novel luminescent bifunctional POSS as a molecular platform for biomedical applications. Dalton Trans. 2012, 41:7467-7473.
47. Voronkov M.G., Larent'yev V.I. Polyhedral oligosilsesquioxanes and their homo derivatives. Top. Curr. Chem. 1982, 102:199-236.
48. Kudo T., Gordon M.S. Theoretical studies of the mechanism for the synthesis of silsesquioxanes. 1. Hydrolysis and initial condensation. J. Am. Chem. Soc. 1998, 120:11432-11438.
49. Kickelbick G. Hybrid Materials. Synthesis, Characterization, and Application 2007, Wiley-VCH Verlag, Weinheim, Germany, pp. 225-254.
50. Gomez-Romero P., Sanchez C. Functional Hybrid Materials 2004, Wiley-VCH Verlag, Weinheim, Germany, pp. 50-85.
51. Kim H.J., Lee J.K., Kim J.B., Park E.S. Substituent effects on microstructure and polymerization of polyalkylsilsesquioxanes. J. Am. Chem. Soc. 2001, 123:12121-12122.
52. Zheng L., Waddon A.J., Farris R.J., Coughlin E.B. X-ray characterizations of polyethylene polyhedral oligomeric silsesquioxane copolymers. Macromolecules 2002, 35:2375-2379.
53. Huang J.C., He C.B., Xiao Y., Mya K.Y., Dai J., Siow Y.P. Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical properties. Polymer 2003, 44:4491-4499.
54. Lu T.L., Liang G.Z., Kou K.C., Guo Z.A. Review synthesis and characterization of cage octa(cyclohexylsilsesquioxane). J. Mater. Sci. 2005, 40:4721-4726.
55. Swain B.P. The analysis of carbon bonding environment in HWCVD deposited a-SiC: H films by XPS and raman spectroscopy. Surf. Coat. Tech. 2006, 201:1589-1593.
56. Guo H., Meador M.A.B., McCorkle L., Quade D.J., Guo J., Hamilton B., Cakmak M., Sprowl G. Polyimide aerogels cross-linked through amine functionalized polyoligomeric silsesquioxane. ACS Appl. Mater. Interfaces 2011, 3:546-552.
57. Chang C.C., Chen W.C. Synthesis and optical properties of polyimide-silica hybrid thin films. Chem. Mater. 2002, 14:4242-4248.
58. 2)-type method. J. Membr. Sci. 2014, 450:138-146.
59. Fang J., Kita H., Okamoto K.I. Gas permeation properties of hyperbranched polyimide membranes. J. Membr. Sci. 2001, 182:245-256.
60. Leu C.M., Reddy G.M., Wei K.H., Shu C.F. Synthesis and dielectric properties of polyimide-chain-end tethered polyhedral oligomeric silsesquioxane nanocomposites. Chem. Mater. 2003, 15:2261-2265.
61. Tsai M.H., Tseng I.H., Chiang J.C., Li J.J. Flexible polyimide films hybrid with functionalized boron nitride and graphene oxide simultaneously to improve thermal conduction and dimensional stability. ACS Appl. Mater. Interfaces 2014, 6:8639-8645.
62. Tomczak S.J., Marchant D., Svejda S., Minton T.K., Brunsvold A.L., Gouzman I., Grossman E., Schatz G.C., Troya D., Sun L.P., Gonzalez R.I. Properties and improved space survivability of POSS (polyhedral oligomeric silsesquioxane) polyimides. Mater. Res. Soc. Symp. Proc. 2005, 851:NN9.1.1-NN9.1.12.
63. Menard K.P. Dynamic Mechanical Analysis: A Practical Introduction 1999, CRC Press, New York.
64. Jung Y., Byun S., Park S., Lee H. Polyimide-organosilicate hybrids with improved thermal and optical properties. ACS Appl. Mater. Interfaces 2014, 6:6054-6061.
65. Zhu Z.K., Yin J., Cao F., Shang X.Y., Lu Q.H. Photosensitive polyimide/silica hybrids. Adv. Mater. 2000, 12:1055-1057.