Tool wear performance in face milling Inconel 182 using minimum quantity lubrication with different nozzle positions

International Journal of Precision Engineering and Manufacturing

Volumn 15, Issue 3, 2014, Pages 557-565

  Wang, Cheng Dong ^a   Chen, Ming ^a   An, Qin Long ^a   Wang, Min ^b   Zhu, Yi Hong ^b  

^a SHANGHAI JIAO TONG UNIVERSITY   (China)

^b Shanghai Power Generation Equipment CO Ltd   (China)

Author keywords

Face milling; Inconel 182; Minimum quantity lubrication (MQL); Nozzle position; Tool wear

Indexed keywords

COMPRESSED AIR; CUTTING TOOLS; ELECTRIC WELDING; FRICTION; GREEN MANUFACTURING; LUBRICATION; NOZZLES; PHYSICAL VAPOR DEPOSITION; WEAR OF MATERIALS;

DIFFICULT-TO-CUT MATERIALS; FACE MILLING; FRICTION COEFFICIENTS; INCONEL 182; LUBRICATION CONDITION; MANUFACTURING TECHNOLOGIES; MINIMUM QUANTITY LUBRICATION; TOOL WEAR;

MILLING (MACHINING);

EID: 84897750262     PISSN: 22347593     EISSN: 20054602     Source Type: Journal    
DOI: 10.1007/s12541-014-0371-4     Document Type: Article

References (28)

1. Ulutan, D. and Ozel, T., "Machining Induced Surface Integrity in Titanium and Nickel Alloys: A Review," International Journal of Machine Tools and Manufacture, Vol. 51, No. 3, pp. 250-280, 2011.
2. Choudhury, I. and El-Baradie, M., "Machinability of Nickel-base Super Alloys: a General Review," Journal of Materials Processing Technology, Vol. 77, No. 1, pp. 278-284, 1998.
3. Ezugwu, E., "Key Improvements in the Machining of Difficult-to-Cut Aerospace Superalloys," International Journal of Machine Tools and Manufacture, Vol. 45, No. 12, pp. 1353-1367, 2005.
4. Cantero, J., Díaz-Álvarez, J., Miguélez, M., and Marín, N., "Analysis of Tool Wear Patterns in Finishing Turning of Inconel 718," Wear, Vol. 297, No. 1, pp. 885-894, 2013.
5. Zhang, S., Li, J., and Wang, Y., "Tool Life and Cutting Forces in End Milling Inconel 718 under Dry and Minimum Quantity Cooling Lubrication Cutting Conditions," Journal of Cleaner Production, Vol. 32, pp. 81-87, 2012.
6. Sireesha, M., Shankar, V., Albert, S. K., and Sundaresan, S., "Microstructural Features of Dissimilar Welds between 316LN Austenitic Stainless Steel and Alloy 800," Materials Science and Engineering: A, Vol. 292, No. 1, pp. 74-82, 2000.
7. Bao, G., Shinozaki, K., Iguro, S., Inkyo, M., Mahara, Y., and Watanabe, H., "Influence of Heat Treatments and Chemical Composition on SSC Susceptibility during Repairing Procedure of Overlaying of Inconel 182 by Laser Surface Melting," Science and Technology of Welding and Joining, Vol. 10, No. 6, pp. 706-716, 2005.
8. Peng, Q., Yamauchi, H., and Shoji, T., "Investigation of Dendrite-Boundary Microchemistry in Alloy 182 using Auger Electron Spectroscopy Analysis," Metallurgical and Materials Transactions A, Vol. 34, No. 9, pp. 1891-1899, 2003.
9. Jang, C., Lee, J., Sung Kim, J., and Eun Jin, T., "Mechanical Property Variation within Inconel 82/182 Dissimilar Metal Weld between Low Alloy Steel and 316 Stainless Steel," International Journal of Pressure Vessels and Piping, Vol. 85, No. 9, pp. 635-646, 2008.
10. Lim, Y. S., Kim, H. P., Cho, H. D., and Lee, H. H., "Microscopic Examination of an Alloy 600/182 Weld," Materials Characterization, Vol. 60, No. 12, pp. 1496-1506, 2009.
11. Wu, C. H. and Chien, C. H., "Influence of Lubrication Type and Process Conditions on Milling Performance," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 221, No. 5, pp. 835-843, 2007.
12. Liu, Z., Xu, J., Han, S., and Chen, M., "A Coupling Method of Response Surfaces (CRSM) for Cutting Parameters Optimization in Machining Titanium Alloy under Minimum Quantity Lubrication (MQL) Condition," Int. J. Precis. Eng. Manuf., Vol. 14, No. 5, pp. 693-702, 2013.
13. Park, C. W., Kwon, K. S., Kim, W. B., Min, B. K., Park, S. J., and et al., "Energy Consumption Reduction Technology in Manufacturing-A Selective Review of Policies, Standards, and Research," Int. J. Precis. Eng. Manuf., Vol. 10, No. 5, pp. 151-173, 2009.
14. Tawakoli, T. and Daneshi, A., "Green Grinding with Innovative Wheel Topography," Int. J. Precis. Eng. Manuf., Vol. 14, No. 7, pp. 1209-1212, 2013.
15. Fratila, D. and Caizar, C., "Application of Taguchi Method to Selection of Optimal Lubrication and Cutting Conditions in Face Milling of AlMg3," Journal of Cleaner Production, Vol. 19, No. 6, pp. 640-645, 2011.
16. Sales, W., Becker, M., Barcellos, C. S., Landre Jr, J., Bonney, J., and Ezugwu, E. O., "Tribological Behaviour when Face Milling AISI 4140 Steel with Minimum Quantity Fluid Application," Industrial Lubrication and Tribology, Vol. 61, No. 2, pp. 84-90, 2009.
17. Yan, L., Yuan, S., and Liu, Q., "Influence of Minimum Quantity Lubrication Parameters on Tool Wear and Surface Roughness in Milling of Forged Steel," Chinese Journal of Mechanical Engineering, Vol. 25, No. 3, pp. 419-429, 2012.
18. López de Lacalle, L., Angulo, C., Lamikiz, A., and Sánchez, J., "Experimental and Numerical Investigation of the Effect of Spray Cutting Fluids in High Speed Milling," Journal of Materials Processing Technology, Vol. 172, No. 1, pp. 11-15, 2006.
19. Tawakoli, T., Hadad, M., and Sadeghi, M., "Influence of Oil Mist Parameters on Minimum Quantity Lubrication-MQL Grinding Process," International Journal of Machine Tools and Manufacture, Vol. 50, No. 6, pp. 521-531, 2010.
20. Liu, Z., Cai, X., Chen, M., and An, Q., "Investigation of Cutting Force and Temperature of End-Milling Ti-6Al-4V with Different Minimum Quantity Lubrication (MQL) Parameters," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 225, No. 8, pp. 1273-1279, 2011.
21. Cai, X. J., Liu, Z. Q., Chen, M., and An, Q. L., "An Experimental Investigation on Effects of Minimum Quantity Lubrication Oil Supply Rate in High-Speed End Milling of Ti-6Al-4V," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 226, No. 11, pp. 1784-1792, 2012.
22. Da Silva, R., Vieira, J., Cardoso, R., Carvalho, H., Costa, E., and et al., "Tool Wear Analysis in Milling of Medium Carbon Steel with Coated Cemented Carbide Inserts using Different Machining Lubrication/Cooling Systems," Wear, Vol. 271, No. 9, pp. 2459-2465, 2011.
23. Dehmolaei, R., Shamanian, M., and Kermanpur, A., "Microstructural Characterization of Dissimilar Welds between Alloy 800 and HP Heat-Resistant Steel," Materials Characterization, Vol. 59, No. 10, pp. 1447-1454, 2008.
24. Barshilia, H. C., Rajam, K., Jain, A., Gopinadhan, K., and Chaudhary, S., "A Comparative Study on the Structure and Properties of Nanolayered TiN/NbN and TiAlN/TiN Multilayer Coatings Prepared by Reactive Direct Current Magnetron Sputtering," Thin Solid Films, Vol. 503, No. 1, pp. 158-166, 2006.
25. Knutsson. A., Johansson. M. P., Karlsson. L., and Oden, M., "Thermally Enhanced Mechanical Properties of Arc Evaporated TiAlN/TiN Multilayer Coatings," Journal of Applied Physics, Vol. 108, No. 4, Paper No. 044312, 2010.
26. Kasim, M., Che Haron, C., Ghani, J., Sulaiman, M., and Yazid, M., "Wear Mechanism and Notch Wear Location Prediction Model in Ball Nose End Milling of Inconel 718," Wear, Vol. 302, No. 1, pp. 1171-1179, 2013.
27. Sharman, A., Dewes, R. C., and Aspinwall, D. K., "Tool Life when High Speed Ball Nose End Milling Inconel 718," Journal of Materials Processing Technology, Vol. 118, No. 1, pp. 29-35, 2001.
28. Liu, Z., An, Q., Xu, J., Chen, M., and Han, S., "Wear Performance of (nc-AlTiN)/(a-Si3N4) Coating and (nc-AlCrN)/(a-Si3N4) Coating in High-Speed Machining of Titanium Alloys under Dry and Minimum Quantity Lubrication (MQL) Conditions," Wear, Vol. 305, No. 1, pp. 249-259, 2013.