Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718

Wear

Volumn 302, Issue 1-2, 2013, Pages 1171-1179

  Kasim, M S ^a   Che Haron, C H ^b   Ghani, J A ^b   Sulaiman, M A ^a   Yazid, M Z A ^c  

^a UNIVERSITI TEKNIKAL MALAYSIA MELAKA   (Malaysia)

^b UNIVERSITI KEBANGSAAN MALAYSIA   (Malaysia)

^c UNIVERSITI KUALA LUMPUR   (Malaysia)

Author keywords

End milling; High speed machining; Inconel 718; Notch wear; Prediction model; Wear mechanism

Indexed keywords

END MILLING; HIGH SPEED MACHINING; INCONEL-718; NOTCH WEAR; PREDICTION MODEL; WEAR MECHANISMS;

MATHEMATICAL MODELS; MILLING (MACHINING); PITTING; TRIBOLOGY; WEAR OF MATERIALS;

BALL MILLING;

EID: 84879148022     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2012.12.040     Document Type: Article

References (52)

1. Kitagawa T., Kubo A., Maekawa K. Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti6Al6V2Sn. Wear 1997, 202:142-148.
2. Choudhury I.A., El-Baradie M.A. Machinability of nickel-base super alloys: a general review. Journal of Materials Processing Technology 1998, 77:278-284.
3. Ulutan D., Ozel T. Machining induced surface integrity in titanium and nickel alloys: A review. International Journal of Machine Tools & Manufacture 2011, 51:31.
4. Shaw M.C. Metal Cutting Principles 2005, Oxford University Press, New York, ed. 2nd Ed.
5. Ezugwu E.O. Key improvements in the machining of difficult-to-cut aerospace superalloys. International Journal of Machine Tools and Manufacture 2005, 45:1353-1367.
6. Liao Y.S., Lin H.M., Wang J.H. Behaviors of end milling Inconel 718 superalloy by cemented carbide tools. Journal of Materials Processing Technology 2008, 201:460-465.
7. Ezugwu E.O., Wang Z.M., Machado A.R. The machinability of nickel-based alloys: a review. Journal of Materials Processing Technology 1999, 86:1-16.
8. O E.E. Key improvements in the machining of difficult-to-cut aerospace superalloys. International Journal of Machine Tools and Manufacture 2005, 45:1353-1367.
9. Rahman M., Seah W.K.H., Teo T.T. The machinability of inconel 718. Journal of Materials Processing Technology 1997, 63:199-204.
10. Coelho R.T., Silva L.R., Braghini A., Bezerra A.A. Some effects of cutting edge preparation and geometric modifications when turning Inconel 718(TM) at high cutting speeds. Journal of Materials Processing Technology 2004, 148:147-153.
11. Li L., He N., Wang M., Wang Z.G. High speed cutting of inconel 718 with coated carbide and ceramic inserts. Journal of Materials Processing Technology 2002, 129:127-130.
12. Usui E., Shirakashi T., Kitagawa T. Analytical prediction of cutting tool wear. Wear 1984, 100:129-151.
13. Altintas Y., Lee P. A general mechanics and dynamics model for helical end mills. CIRP Annals - Manufacturing Technology 1996, 45:59-64.
14. Childs T., Maekawa K., Obikawa T., Yamane Y. Metal Machining; Theory abd Applications 2000, John Wiley & Sons Inc., New York.
15. Astakhov V.P. An opening historical note. International Journal of Machining and Machinability of Materials 2006, 1:3-11.
16. Quinsat Y., Lavernhe S., Lartigue C. Characterization of 3D surface topography in 5-axis milling. Wear 2011, 271:590-595.
17. D'Addona D., Segreto T., Simeone A., Teti R. ANN tool wear modelling in the machining of nickel superalloy industrial products. CIRP Journal of Manufacturing Science and Technology 2011, 4:33-37.
18. Leone C., D'Addona D., Teti R. Tool wear modelling through regression analysis and intelligent methods for nickel base alloy machining. CIRP Journal of Manufacturing Science and Technology 2011, 4(3):327-331.
19. Kaya B., Oysu C., Ertunc H.M. Force-torque based on-line tool wear estimation system for CNC milling of inconel 718 using neural networks. Advances in Engineering Software 2011, 42:76-84.
20. Zhao H., Barber G.C., Zou Q. A study of flank wear in orthogonal cutting with internal cooling. Wear 2002, 253:957-962.
21. Fontaine M., Moufki A., Devillez A., Dudzinski D. Modelling of cutting forces in ball-end milling with tool-surface inclination: Part I: Predictive force model and experimental validation. Journal of Materials Processing Technology 2007, 189:73-84.
22. Miyaguchi T., Masuda M., Takeoka E., Iwabe H. Effect of tool stiffness upon tool wear in high spindle speed milling using small ball end mill. Precision Engineering 2001, 25:145-154.
23. Shao H., Wang H.L., Zhao X.M. A cutting power model for tool wear monitoring in milling. International Journal of Machine Tools and Manufacture 2004, 44:1503-1509.
24. Xie L.J., Schmidt J., Schmidt C., Biesinger F. 2D FEM estimate of tool wear in turning operation. Wear 2005, 258:1479-1490.
25. T. Özel, M. Sima, Finite element simulation of high speed machining Ti-6Al-4V alloy using modified material models, in: Proceedings of the 38th North American Manufacturing Research Conference (NAMRC), Society of Manufacturing Engineers, Queen's University, Kingston, Ontario, Canada., 2010, pp. 49-56.
26. Attanasio A., Ceretti E., Fiorentino A., Cappellini C., Giardini C. Investigation and FEM-based simulation of tool wear in turning operations with uncoated carbide tools. Wear 2010, 269:344-350.
27. Sivasakthivel P.S., Murugan V.V., Sudhakaran R. Prediction of tool wear from machining parameters by response surface methodology in end milling. International Journal of Engineering Science and Technology 2010, 2:1780-1789.
28. Elmagrabi N.H., Shuaeib F.M., Haron C.H.C. An overview on the cutting tool factors in machinability assessment. Journal of Achievements in Materials and Manufacturing Engineering 2007, 23:87-90.
29. K. Yamamoto, M. Kuroda, H. Omokawa, K. Itakura, High-Efficiency Cutting of Super-Heat-Resistant Alloy, Mistubishi Heavy Industry, Ltd, available from (accessed 1 38). http://www.mhi.co.jp/en/technology/review/indexe-38-1.html.
30. Krain H.R., Sharman A.R.C., Ridgway K. Optimisation of tool life and productivity when end milling Inconel 718TM. Journal of Materials Processing Technology 2007, 189:153-161.
31. Sharman A., Dewes R.C., Aspinwall D.K. Tool life when high speed ball nose end milling Inconel 718. Journal of Materials Processing Technology 2001, 118:29-35.
32. Kramer B.M., B.F.V.T. A Comprehensive tool wear model. CIRP Annals-M anufacturing Technology 1986, 35:67-70.
33. Katsuhiko S., Yasuo Y., Norihiko N. Tool wear under high speed end milling of nickel-base superalloy inconel 718. Journal of the Japan Society for Precision Engineering 2004, 70:1086-1090.
34. E.O. Ezugwu, K.A. Olajire, Z.M. Wang, Wear analysis of coated carbide tools when machining nickel base, Inconel 718 Alloy, in: Surface Modification Technologies XIV: Proceedings of the Fourteenth International Conference on Surface Modification Technologies 2000 ASM International, Montreal, 2000, pp. 279-286.
35. B. Winegard, The positive and negative of cutting tool geometries, Seco, available from (accessed 18.06.12). http://www.secotool.com/us.
36. Kuo C.M., Yang Y.T., Bor H.Y., Wei C.N., Tai C.C. Aging effects on the microstructure and creep behavior of Inconel 718 superalloy. Materials Science and Engineering: A 2009, 510-511:289-294.
37. N.S. Alloys, 718 Inconel® Nickel Alloy Bar, National Specialty Alloys, available from http://www.nsalloys.com/718-nickel-alloy-bar.html (accessed 3.03.11).
38. ISO8688-2, Tool Life Testing in Milling-Part 2: End Milling, International Organization for Standardization, Geneva, 1989.
39. Haron C.H.C., Ginting A., Arshad H. Performance of alloyed uncoated and CVD-coated carbide tools in dry milling of titanium alloy Ti-6242S. Journal of Materials Processing Technology 2007, 185:77-82.
40. Alauddin M., El Baradie M.A., Hashmi M.S.J. Tool-life testing in the end milling of Inconel 718. Journal of Materials Processing Technology 1995, 55:321-330.
41. Ezugwu E.O., Bonney J., Fadare D.A, Sales W.F. Machining of nickel-base, Inconel 718, alloy with ceramic tools under finishing conditions with various coolant supply pressures. Journal of Materials Processing Technology 2005, 162-163:609-614.
42. Jawaid A., Koksal S., Sharif S. Cutting performance and wear characteristics of PVD coated and uncoated carbide tools in face milling Inconel 718 aerospace alloy. Journal of Materials Processing Technology 2001, 116:2-9.
43. Bradley E. Superalloy: A Technical Guide 1989, ASM International, Metal Park.
44. W. Grzesik, Advanced Machining Processed of Metallic Materials; Theory, Modelling and Applications, 1st Ed ed., Oxford, 2008.
45. Li H.Z., Zeng H., Chen X.Q. An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts. Journal of Materials Processing Technology 2006, 180:296-304.
46. Abdel-Aal H.A., Nouari M., Mansori M.E. The effect of thermal property degradation on wear of WC-CO inserts in dry cutting. Wear 2008, 265:1670-1679.
47. Lorentzon J., Järvstråt N., Josefson B.L. Modelling chip formation of alloy 718. Journal of Materials Processing Technology 2009, 209:4645-4653.
48. Alauddin M., El Baradie M.A., Hashmi M.S.J. Modelling of cutting force in end milling Inconel 718. Journal of Materials Processing Technology 1996, 58:100-108.
49. Lai W.H. Modeling of Cutting Forces in End Milling Operations. Tamkang Journal of Science and Engineering 2000, 3:15-22.
50. Sun Y., Ren F., Guo D., Jia Z. Estimation and experimental validation of cutting forces in ball-end milling of sculptured surfaces. International Journal of Machine Tools and Manufacture 2009, 49:1238-1244.
51. E. Pay, M. Cosma, Vertical path strategy for 3D CAD analysis of chip area in 3 axes ball nose end milling, in: Proceedings of the International multidisciplinary conference, 7th, Baia Mare, Romania, 2007, pp. 115-120.
52. Ning L., Veldhuis S.C., Yamamoto K. Investigation of wear behavior and chip formation for cutting tools with nano-multilayered TiAlCrN/NbN PVD coating. International Journal of Machine Tools and Manufacture 2008, 48:656-665.